A3LSMN7506VMobile Phone

User manual SM-N7506V This device is capable of operating in Wi-Fi mode in the 2.4 and 5 GHz bands. The FCC requires that devices operating within 5.15-5.25 GHz may only be used indoors, not outside, in order to avoid interference with MobileSatellite Services (MSS). Therefore, do not use this device outside as a Wi-Fi hotspot or in Wi-Fi Direct mode outside when using the 5.15- 5.25 GHz frequencies. Draft 6.1 l using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to “introducing your mobile phone, Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information  Refer to—pages with related information; for example: p. 12  (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [ ](represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners:  Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide  Java™ is a trademark of Sun Microsystems, Inc.  Windows Media Player ® is a registered trademark of Microsoft Corporation. contents safety and usage information Safety warnings Safety precautions Important usage information introducing your mobile phone Unpack .. Phone layout Keys Display Icons assembling and preparing your mobile phone Install the SIM card and battery Charge the battery using basic functions Turn your phone on and off Access menus Customise your phone Use basic call functions Send and view messages Add and find contacts troubleshooting safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipment installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care  Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone.  Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones.  Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.  Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipment Your phone can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers …

Text truncated - open the document above for the full version.

 February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

129, Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, KOREA Date : October 22 nd , 2013 UL Verification Services Inc. Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our agent, we still recognize that we are responsible to: comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; 129, Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, KOREA f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter), RA Head of QA Lab (General Manager) Samsung Electronics America, Inc 19 Chapin Rd, Bldg D Pine Brook, NJ 07058

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea February 17, 2014 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMN7506V Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy of KDB 784748 D01. The label statement is as follows: The FCC ID label is located in the battery compartment. While the battery cover is installed when the unit is shipped from the factory, the battery is never installed prior to sale, so the user must remove the cover in order to install the battery and operate the device. At this time the FCC ID is readily visible to the user. The label is permanently attached by acrylic glue and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Seoung Ho Park Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliance Group.

Label and Location Model: SM-N7506V FCC ID: A3LSMN7506V Label: Location: Top Back of device Bottom Phone: Label is placed inside of the battery compartment. Label

FCC ID: A3LSMN7506V Issue Date: Feb. 20, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 2 of 179 HCTA1402F003-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 Version Rev DATE DESCRIPTION HCTA1402F003 Feb. 14, 2014 First Approval Report HCTA1402F003-1 Feb. 20, 2014 Sec. 15.3 : was revised (Typo) FCC ID: A3LSMN7506V Issue Date: Feb. 20, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 3 of 179 HCTA1402F003-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 Table of Contents 1. INTRODUCTION .......................................................................................................................................... 2. TEST METHODOLOGY ............................................................................................................................... 3. DESCRIPTION OF DEVICE ......................................................................................................................... 4. DESCRIPTION OF TEST EQUIPMENT ...................................................................................................... 5. SAR MEASUREMENT PROCEDURE ..................................................................................................... 6. DESCRIPTION OF TEST POSITION ....................................................................................................... 7. MEASUREMENT UNCERTAINTY ........................................................................................................... 8. ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS ................................................................................. 9. SAR SYSTEM VALIDATION .................................................................................................................... 10. SYSTEM VERIFICATION ....................................................................................................................... 11. RF CONDUCTED POWER MEASUREMENT ....................................................................................... 12. SAR Test configuration & Antenna Information ................................................................................ 13. SAR TEST DATA SUMMARY ................................................................................................................ 13.1-1 Measurement Results (GSM850 Head SAR) ............................................................................ 13.1-2 Measurement Results (GSM1900 Head SAR) .......................................................................... 13.1-3 Measurement Results (WCDMA850 Head SAR) ....................................................................... 13.1-4 Measurement Results (WCDMA1900 Head SAR) ..................................................................... 13.1-5 Measurement Results (LTE Band 41 20MHz Head SAR) ......................................................... 13.1-6 Measurement Results (DTS Head SAR) ................................................................................... 13.1-7 Measurement Results (Nll Head SAR) ...................................................................................... 13.2-1 Measurement Results (GSM850 Hotspot SAR) ......................................................................... 13. 2-2 Measurement Results (GSM1900 Hotspot SAR)...................................................................... 13. 2-3 Measurement Results (WCDMA850 Hotspot SAR) .................................................................. 13. 2-4 Measurement Results (WCDMA1900 Hotspot SAR) ................................................................ 13.2-5 Measurement Results (LTE Band 41 20MHz Hotspot SAR) ..................................................... 13. 2-6 Measurement Results (WLAN Hotspot SAR) ........................................................................... 13.3-1 Measurement Results (WLAN Body-worn SAR) ........................................................................ 13.3-2 Measurement Results (Nll Body-worn SAR) .............................................................................. 13.3-3 Measurement Results (Body-worn SAR) ................................................................................... 13.3-4 Measurement Results (Nll Hand SAR) ...................................................................................... 13.4 SAR Test Notes ............................................................................................................................. 14. SAR Measurement Variability and Uncertainty ................................................................................. 15. SAR Summation Scenario ................................................................................................................... 16. CONCLUSION ........................................................................................................................................ 17. REFERENCES ....................................................................................................................................... Attachment 1. – SAR Test Plots ................................................................................................................ Attachment 2. – Dipole Verification Plots................................................................................................. Attachment 3. – Probe Calibration Data ................................................................................................ Attachment 4. – Dipole Calibration Data ............................................................................................... FCC ID: A3LSMN7506V Issue Date: Feb. 20, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 4 of 179 HCTA1402F003-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 1. INTRODUCTION The FCC has adopted the guidelin…

Text truncated - open the document above for the full version.

FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F011 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 108 Version TEST REPORT NO. DATE DESCRIPTION HCTR1402F011 February 12, 2014 - First Approval Report FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F011 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 108 Table of Contents 1. GENERAL INFORMATION .......................................................................................................................... 2. EUT DESCRIPTION ..................................................................................................................................... 3. TEST METHODOLOGY ............................................................................................................................... 3.1 EUT CONFIGURATION ...................................................................................................................... 3.2 EUT EXERCISE .................................................................................................................................. 3.3 GENERAL TEST PROCEDURES ...................................................................................................... 3.4 DESCRIPTION OF TEST MODES ..................................................................................................... 4. INSTRUMENT CALIBRATION..................................................................................................................... 5. FACILITIES AND ACCREDITATIONS ......................................................................................................... 5.1 FACILITIES ......................................................................................................................................... 5.2 EQUIPMENT ....................................................................................................................................... 6. ANTENNA REQUIREMENTS ...................................................................................................................... 7. SUMMARY OF TEST RESULTS ................................................................................................................. 8. TEST RESULT ............................................................................................................................................. 8.1 DUTY CYCLE ...................................................................................................................................... 8.2 26 dB BANDWIDTH MEASUREMENT .......................................................................................... 8.3 OUTPUT POWER MEASUREMENT .............................................................................................. 8.4 POWER SPECTRAL DENSITY ...................................................................................................... 8.5 PEAK EXCURSION RATIO ............................................................................................................ 8.6 FREQUENCY STABILITY. ............................................................................................................. 8.7 RADIATED MEASUREMENT. ........................................................................................................ 8.7.1 RADIATED SPURIOUS EMISSIONS. ................................................................... 8.7.2 RADIATED RESTRICTED BAND EDGE MEASUREMENTS .............................. 8.8 POWERLINE CONDUCTED EMISSIONS .................................................................................. 9. LIST OF TEST EQUIPMENT ................................................................................................................ FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F011 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 108 1. GENERAL INFORMATION Applicant: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Rep. of Korea FCC ID: A3LSMN7506V EUT Type: Mobile Phone FCC Model(s): SM-N7506V Date(s) of Tests: February 05, 2014 ~ February 11, 2014 Place of Tests: HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea. (IC Recognition No. : 5944A-3) 2. EUT DESCRIPTION EUT Type Mobile Phone FCC Model Name SM-N7506V Power Supply DC 3.8 V Frequency Range TX_20 MHz BW: 40 MHz BW: RX_20 MHz BW: 40 MHz BW: 5180 MHz - 5240 MHz (UNII 1)/ 5260 MHz - 5320 MHz (UNII 2)/ 5500 MHz - 5700 MHz (UNII 2e) where) Not supported 5600 MHz – 5640 MHz 5190 MHz - 5230 MHz (UNII 1)/ 5270 MHz - 5310 MHz (UNII 2)/ 5510 MHz - 5670 MHz (UNII 2e) where) Not supported 5590 MHz – 5630 MHz 5180 MHz - 5240 MHz (UNII 1)/ 5260 MHz - 5320 MHz (UNII 2)/ 5500 MHz - 5700 MHz (UNII 2e) where) Not supported 5600 MHz – 5640 MHz 5190 MHz - 5230 MHz (UNII 1)/ 5270 MHz - 5310 MHz (UNII 2)/ 5510 MHz - 5670 MHz (UNII 2e) where) Not supported 5590 MHz – 5630 MHz Max. RF Output Power: Wi-Fi 802.11a (5180~5240) (8.18 dBm)/ Wi-Fi 802.11a (5260~5320) (8.44 dBm)/ Wi-Fi 802.11a (5500~5700) (8.69 dBm)/ Wi-Fi 802.11n_20 MHz BW (5180~5240) (7.73 dBm)/ Wi-Fi 802.11n_20 MHz BW(5260~5320)(8.17 dBm)/ Wi-Fi 802.11n_20 MHz BW(5500~5700)(7.71 dBm)/ Wi-Fi 802.11n_40 MHz BW(5190~5230) (7.36 dBm)/ Wi-Fi 802.11n_40 MHz BW (5270~5310) (7.58 dBm)/ Wi-Fi 802.11n_40 MHz BW (5510~5670) (7.70 dBm) Modulation Type OFDM(802.11a, 802.11n_20 MHz, 802.11n_40 MHz) Antenna Specification Manufacturer: PULSE ELECTRONICS KOREA Antenna type: LDS Antenna Peak Gain : -0.08 dBi FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F011 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 108 3. TEST METHODOLOGY The measurement procedure described in FCC KDB 789033 D01 General UNII Test Pr…

Text truncated - open the document above for the full version.

FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F014 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 24 Version TEST REPORT NO. DATE DESCRIPTION HCTR1402F014 February 12, 2014 - First Approval Report FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F014 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 24 Table of Contents 1. GENERAL INFORMATION .......................................................................................................................... 2. EUT DESCRIPTION ..................................................................................................................................... 3. SCOPE ......................................................................................................................................................... 4. INSTRUMENT CALIBRATION..................................................................................................................... 5. FACILITIES AND ACCREDITATIONS ......................................................................................................... 5.1 FACILITIES ......................................................................................................................................... 5.2 EQUIPMENT ....................................................................................................................................... 6. SUMMARY OF TEST RESULTS ................................................................................................................. 7. DESCRIPTION OF DYNAMIC FREQUENCY SELECTION TEST.............................................................. 7.1 APPLICABILITY ................................................................................................................................. 7.2 REQUIREMENTS................................................................................................................................ 7.3 DFS DETECTION THRESHOLD VALUES ........................................................................................ 7.4 PARAMETERS OF DFS TEST SIGNALS .......................................................................................... 7.5 TEST AND MEASUREMENT SYSTEM ......................................................................................... 7.6 DESCRIPTION OF EUT .................................................................................................................. 7.7 UNII2 TEST RESULT ...................................................................................................................... 7.8 UNII2e TEST RESULT .................................................................................................................... 8. LIST OF TEST EQUIPMENT ................................................................................................................... FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F014 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 24 1. GENERAL INFORMATION Applicant: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Rep. of Korea FCC ID: A3LSMN7506V EUT Type: Mobile Phone Model name(s): SM-N7506V Date(s) of Tests: February 03, 2014 ~ February 12, 2014 Place of Tests: HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea. (IC Recognition No. : 5944A-3) 2. EUT DESCRIPTION EUT Type Mobile Phone Model Name SM-N7506V Power Supply DC 3.8 V Battery type Li-ion Battery(Standard) Frequency Range 5260 MHz - 5320 MHz (UNII2 Band)_20 MHz BW 5500 MHz - 5720 MHz (UNII2e Band)_20 MHz BW where)Not supported 5600 MHz - 5650 MHz Max. RF Output Power: 802.11a_UNII2 Band (8.44 dBm)/ 802.11n_20 MHz BW_UNII2 Band (8.17 dBm)/ 802.11n_40 MHz BW_UNII2 Band (9.62 dBm) 802.11a_UNII2e Band (8.69 dBm)/ 802.11n_20 MHz BW_UNII2e Band (7.71 dBm)/ 802.11n_40 MHz BW_UNII2e Band (9.73 dBm) Modulation Type OFDM Antenna Specification Manufacturer: PULSE ELECTRONICS KOREA Antenna type: LDS Antenna Peak Gain : -0.33 dBi (5260 MHz – 5320 MHz) -0.24 dBi (5500 MHz – 5720 MHz) FCCPT.15.407 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1402F014 Date of Issue: February 12, 2014 EUT Type: Mobile Phone FCC ID: A3LSMN7506V Page of 24 3. SCOPE This report has been prepared to demonstrate compliance with the requirements for Dynamic Frequency Selection(DFS) as stated in FCC 06-96. Testing was performed SM-N7506V in accordance with the measurement procedure described in Appendix B of FCC 06-96. As of July 20, 2007 all devices operating in the UNII-II Band and /or the UNII-III Bands must comply with the DFS requirements. As the EUT does not have radar detection capability it was evaluated as a Client Only Device. 4. INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipments, which is traceable to recognized national standards. 5. FACILITIES AND ACCREDITATIONS 5.1 FACILITIES The SAC(Semi-Anechoic Chamber) and conducted measurement facility used to collect the radiated data are located at the 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea The site is constructed in conformance with the requirements of ANSI C63.4. (Version :2003) and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated June 21, 2011 (Registration Number: 90661) 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of Linearly polarized antennas: tuned dipole, bi-conical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selec…

Text truncated - open the document above for the full version.