A3LSMS911BMobile Phone

English 2 Safety information Please read this important safety information before you use the device. It contains general safety information for devices and may include content that does not apply to your device. Follow the warning and caution information to prevent injury to yourself or others and to prevent damage to your device. The term ‘device’ refers to the product and its battery, the items supplied with the product, and any Samsung-approved accessories used with the product. Warning Failure to comply with safety warnings and regulations can cause serious injury or death Your device contains magnets. Keep it away from credit cards, implanted medical devices, and other devices that may be affected by magnets. In the case of medical devices, keep your device more than 15 cm apart. Stop using your device if you suspect any interference with your medical device and consult your physician or your medical device manufacturer Do not use damaged power cords or plugs, or loose electrical sockets Unsecured connections can cause electric shock or fire. Do not touch the device, power cords, plugs, or the electric socket with wet hands or other wet body parts Doing so may cause electric shock. Do not pull the power cord excessively when disconnecting it Doing so may cause electric shock or fire. Do not bend or damage the power cord Doing so may cause electric shock or fire. Do not use the device with wet hands while the device is charging Doing so may cause electric shock. English 3 Do not directly connect together the charger’s positive and negative terminals Doing so may cause fire or serious injury. Do not use your device outdoor during a thunderstorm Doing so may result in electric shock or device malfunction. Use manufacturer-approved batteries, chargers, accessories, and supplies • Using generic batteries or chargers may shorten the life of your device or cause the device to malfunction. They may also cause a fire or cause the battery to explode. • Use only Samsung-approved battery, charger, and cable specifically designed for your device. Incompatible battery, charger, and cable can cause serious injuries or damage to your device. • Samsung cannot be responsible for the user’s safety when using accessories or supplies that are not approved by Samsung. Do not carry your device in your back pockets or on your waist • The device may be damaged, explode, or result in a fire if too much pressure is applied to it. • You may be injured if you are bumped or fall. Do not drop or cause excessive impact to the device • This may damage your device or battery, cause the device to malfunction, or shorten its lifespan. • This may also cause overheating, combustion, fire, or other hazards. Handle and dispose of the device and charger with care • Never dispose of the battery or device in a fire. Never place the battery or device on or in heating devices, such as microwave ovens, stoves, or radiators. The device may explode when overheated. Follow all local regulations when disposing of used battery or device. • Never crush or puncture the device. • Avoid exposing the device to high external pressure, which can lead to an internal short circuit and overheating. Protect the device, battery and charger from damage • Avoid exposing your device and battery to very cold or very hot temperatures. • Extreme temperatures can damage the device and reduce the charging capacity and life of your device and battery. • Do not directly connect together the battery’s positive and negative terminals and prevent them from coming into contact with metal objects. Doing so may cause the battery to malfunction. English 4 • Do not use a cable whose covering is peeled off or damaged, and do not use any charger or battery that is damaged or malfunctioning. • Do not turn on or use the device when the battery compartment is exposed. Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers • The battery may leak. • Your device may overheat and cause a fire. Do not use or store your device in areas with high concentrations of dust or airborne materials Dust or foreign materials can cause your device to malfunction and may result in fire or electric shock. Prevent the multipurpose jack and the small end of the charger from contact with conductive materials, such as liquids, dust, metal powders, and pencil leads. Do not touch the multipurpose jack with sharp tools or cause an impact to the multipurpose jack Conductive materials may cause a short circuit or corrosion of the terminals, which may result in an explosion or fire. When using the wireless charger, do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the device and the wireless charger The device may not charge properly or may overheat. Do not bite or suck the device or the battery • Doing so may damage the device or result in an explosion or fire. • Children or animals can choke on small parts. • If children use the device, make sure that they use the device properly. Do not insert the device or supplied accessories into the eyes, ears, or mouth Doing so may cause suffocation or serious injuries. Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery For safe disposal of your Li-Ion battery, contact your nearest authorised service centre. English 5 Caution Failure to comply with safety cautions and regulations can cause injury or property damage Do not use your device near other electronic devices • Most electronic devices use radio frequency signals. Your device may interfere with other electronic devices. • Using an LTE data connection may cause interference with other devices, such as audio equipment and telephones. Do not use your device in a hospital, on an aircraft, or in an automotive equipment that can be interfered with by radio frequency • Avoid using your device within a 15 cm range of a pacemaker, if possible, as your device can interfere with the pacemaker. …

Text truncated - open the document above for the full version.

221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo www.samsung.com USER MANUAL English. 12/2022. Rev.1.0 DM1 DM1/DS DM2 DM2/DS DM3 DM3/DS 2 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Table of Contents Getting started 6 Device layout and functions 12 Charg ing the battery 17 Nano-SIM card and eSIM 19 Turning the device on and off 20 Initial setup Apps and features 21 Introduction 22 Samsung account 23 Understanding the screen 31 Notification panel 33 Ent ering text 35 Installing or uninstalling apps 37 Phone 39 Contacts 41 Messages 43 Internet 44 Multi windo w 47 Bixby 49 Bixby Vision 50 Samsung Kids 51 Samsung Health 52 Samsung Members 52 Samsung Global G oals 52 Samsung T V Plus 52 Galax y Shop 53 Galaxy Wearable 53 Calendar 54 Reminder 55 My Files 55 Clock 55 Calculator 56 Game Launcher 57 Game Booster 58 SmartThings 58 Smart View 59 Music Share 61 Link to Windows 62 Samsung DeX 68 Google apps 69 S Pen (DM3) 84 Samsung Not es 89 PENUP (DM3) 89 Camera 106 Gallery 110 AR Zone 116 Voice Recorder 118 Samsung Wallet 120 Samsung Pay 122 Sharing content 124 Scr een capture and screen record 126 Tr ansferring data from your previous device (Smart Switch) Table of Contents 3 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo 146 Security and privacy 147 Face recognition 149 Finger print recognition 151 Samsung Pass 153 Secure Folder 156 S ecure Wi-Fi 157 Location 158 Saf ety and emergency 158 Ac counts and backup 159 Samsung Cloud 160 Google 160 Adv anced features 161 Motions and gestures 162 Video call eff ects 163 Dual M essenger 164 Digital Wellbeing and parental controls 164 Batt ery and device care 164 Optimising your device 165 Ba ttery 165 S torage 165 M emory 165 Devic e protection 166 Aut o optimisation 166 Sof tware update 166 Diag nostics 166 Main tenance mode 166 A pps 167 Gener al management 168 A ccessibility 168 Sof tware update 169 About phone Settings 128 Introduction 129 Samsung account 129 C onnections 130 Wi-Fi 132 Bluetooth 133 NFC and con tactless payments (NFC-enabled models) 134 Data sa ver 135 Mobile data only apps 135 Mobile Hotspot 136 Mor e connection settings 137 Connec ted devices 138 Modes and R outines 138 Using modes 138 Using r outines 139 Sounds and vibr ation 140 Sound qualit y and effects 140 Separ ate app sound 141 Notifications 141 Display 142 Motion smoothness 143 Changing the scr een mode or adjusting the display colour 144 Wallpaper and style 144 T hemes 144 Home screen 144 Lock screen 145 Smart L ock 145 Alw ays On Display Table of Contents 4 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Usage notices 171 Precautions for using the device 174 Notes on package contents and accessories 175 Maintaining water and dust resistance 176 Devic e overheating situations and solutions Appendix 180 Accessibility 194 Troubleshooting 199 Removing the battery 5 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Getting started Getting started 6 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Device layout and functions ► DM3: Front camera Volume key Side key SIM card tray Speaker Fingerprint recognition sensor Side key Volume key Touchscreen Edge screen Edge screen Front camera Earphone jack / Multipurpose jack (USB Type-C) S Pen SIM card tray Proximity/Light sensor Microphone Getting started 7 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Rear camera NFC antenna / Wireless charging coil Rear camera GPS antenna Laser AF sensor Flash Main antenna Speaker Microphone Getting started 8 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo ► DM2, DM1: Front camera Volume key Side key SIM card tray Speaker Fingerprint recognition sensor Side key Volume key Touchscreen Front camera Proximity/Light sensor Earphone jack / Multipurpose jack (USB Type-C) SIM card tray Microphone Getting started 9 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo Rear camera NFC antenna / Wireless charging coil Rear camera Flash Main antenna Microphone Speaker GPS antenna Getting started 10 221103_wonseop.lee 221103_wo 221103_wonseop.lee 221103_wonseop.lee 221103 221103_wonseop.lee 221103_wo • When using the speakers, such as when playing media files or using speakerphone, do not place the device close to your ears. • Be careful not to expose the camera lens to a strong light source, such as direct sunlight. If the camera lens is exposed to a strong light source, such as direct sunlight, the camera image sensor may be damaged. A damaged image sensor is irreparable and will cause dots or spots in pictures. • If you use the device with its glass or acrylic body broken, there may be a risk of injury. Use the device only after it has been repaired at a Samsung Service Centre. • If dust or foreign materials enter the microphone, speaker, or receiver, the device’s sound may become quiet or certain features may not work. If you attempt to remove the dust or foreign materials with a sharp object, the device may be damaged and its appearance may be affected. • Connectivity problems and battery drain may occur in the following situations: – If you attach metallic stickers on the antenna area of the device – If you attach a device cover made with metallic material to the device – If you cover the device’s antenna area with your hands or other objects while using certain features, such as calls or the mobile data connection • If the area around the rear camera is covered with accessories, such as a screen protector or stickers, unwanted noises may occur during calls or media playback. • Do not cover the proximity/light sensor area …

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: Oct. 26, 2022 FCC ID: A3LSMS911B RE: Letter of Declaration on UNII-4 Client Operation Dear OET, We attest that the device complies with device protocol requirements and operational restrictions: 1. This is a client device and it will not directly connect to another client device on any channels that are contained, even partially, within the UNII-4 band. 2. It will only associate and connect with an indoor Access Point (AP) or indoor Subordinate within the UNII-4 band. 3. It will always be under the control of an indoor AP within the UNII-4 band. It does not support active scanning in the UNII-4 bands. In the UNII-4 band if an AP is detected this client device may transmit brief messages, prior to being under the control of an AP, to join an AP network. These brief messages will have a time-out mechanism if it does not receive a response from an AP. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: Oct. 26, 2022 FCC ID: A3LSMS911B To whom it may concern: We, the undersigned, hereby authorize HCT Co., LTD to act on our behalf in all ma tters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by HCT Co., LTD on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

DATE : Oct.26, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: FCC ID: Request for Confidentiality A3LSMS911B To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0. 457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair adv antage in the market. In additional to above mentioned documents , pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 1 / 7 HCT CO.,LTD. - EXTERNAL PHOTOGRAPHS FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 2 / 7 HCT CO.,LTD. 1. External Photo (Front view) FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 3 / 7 HCT CO.,LTD. 2. External Photo (Rear view) FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 4 / 7 HCT CO.,LTD. 3. External Photo (Left side view) FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 5 / 7 HCT CO.,LTD. 4. External Photo (Right side view) FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 6 / 7 HCT CO.,LTD. 5. External Photo (Top view) FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 7 / 7 HCT CO.,LTD. 6. External Photo (Bottom view)

FCC certification FCC ID: A3LSMS911B Description of E-label and Location - FCC ID : A3LSMS911B - Model : SM-S911B/DS, SM-S911B This model is applied E-label, please find description of E-label below. 1.FCC ID(E-label): Setting -> About Phone -> Status <Device Display Screen> 2.Instruction of E-label on the User manual (online manual) 3.FCC ID on the Quick Start Guide SAR information on this and other model phones can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the phone FCC ID number for search, A3LSMS911B. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for a typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones. Sincerely, Engineer Wonsub Lee Samsung Electronics Co., Ltd. TEL : +82-10-5110-6959 E-mail : [email protected]

Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 16677, Korea Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 E-label Attestation Letter - FCC ID : A3LSMS911B - Model : SM-S911B/DS, SM-S911B To Whom It May Concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find FCC ID per CFR 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung Electronics Co., Ltd., have programmed the e-label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Ms. Jenni Chun General Manager Regulatory & Environmental Affairs Samsung Electronics Co., Ltd. TEL : +1-973-808-6375 E-mail : [email protected]

FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 1 / 23 HCT CO.,LTD. - INTERNAL PHOTOGRAPHS FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 2 / 23 HCT CO.,LTD. ■ Main / Bluetooth & WLAN Antenna Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 3 / 23 HCT CO.,LTD. 1. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 4 / 23 HCT CO.,LTD. 2. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 5 / 23 HCT CO.,LTD. 3. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 6 / 23 HCT CO.,LTD. 4. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 7 / 23 HCT CO.,LTD. 5. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 8 / 23 HCT CO.,LTD. 6. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 9 / 23 HCT CO.,LTD. 7. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 10 / 23 HCT CO.,LTD. 8. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 11 / 23 HCT CO.,LTD. 9. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 12 / 23 HCT CO.,LTD. 10. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 13 / 23 HCT CO.,LTD. 11. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 14 / 23 HCT CO.,LTD. 12. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 15 / 23 HCT CO.,LTD. 13. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 16 / 23 HCT CO.,LTD. 14. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 17 / 23 HCT CO.,LTD. 15. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 18 / 23 HCT CO.,LTD. 16. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 19 / 23 HCT CO.,LTD. 17. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 20 / 23 HCT CO.,LTD. 18. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 21 / 23 HCT CO.,LTD. 19. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 22 / 23 HCT CO.,LTD. 20. Internal Photo FCC ID: A3LSMS911B F-TP22-03 (Rev.00) 23 / 23 HCT CO.,LTD. 21. Internal Photo

F-TP22-03 (Rev.00) Page 1 of 327 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 SAR TEST REPORT Applicant Name: SAMSUNG Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu, Suwon-Si, Gyeonggi-do, 16677 Rep. of Korea Date of Issue: Nov. 08, 2022 Test Report No.: HCT-SR-2210-FC004-R2 Test Site: HCT CO., LTD. FCC ID: Equipment Type: Mobile Phone Application Type Certification FCC Rule Part(s): CFR §2.1093 Model Name: SM-S911B/DS Additional Model Name: SM-S911B Date of Test: Sep. 05, 2022 ~ Nov. 07, 2022 This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in FCC KDB procedures and had been tested in accordance with the measurement procedures specified in FCC KDB procedures. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Tested By Jung Hun, Park Test Engineer SAR Team Certification Division Reviewed By Yun-jeang, Heo Technical Manager SAR Team Certification Division This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. A3LSMS911B FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) Page 2 of 327 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 Nov. 01, 2022 Initial Release 1 Nov. 07, 2022 Revised Sec.4, Sec.11, Sec.14, Sec.16, Appendix H 2 Nov. 08, 2022 Revised Sec.4 This test results were applied only to the test methods required by the standard. The above Test Report is not related to the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) Page 3 of 327 Table of Contents 1. Test Regulations .....................................................................................................................................4 2. Test Location ...........................................................................................................................................5 3. Information of the EUT............................................................................................................................5 4. Device Under Test Description ...............................................................................................................7 5. Introduction ........................................................................................................................................... 38 6. Description of test equipment .............................................................................................................. 39 7. SAR Measurement Procedure .............................................................................................................. 40 8. Description of Test Position ................................................................................................................. 42 9. RF Exposure Limits .............................................................................................................................. 47 10. FCC SAR General Measurement Procedures .................................................................................... 48 11. Output Power Specifications .............................................................................................................. 55 12. System Verification ........................................................................................................................... 237 13. SAR Test Data Summary................................................................................................................... 245 14. Simultaneous SAR Analysis ............................................................................................................. 289 15. SAR Measurement Variability and Uncertainty ................................................................................ 304 16. Antenna Impedance tuner testing .................................................................................................... 305 17. LTE TDD Band 41 Power Class 2 and Power class 3 Linearity ....................................................... 318 18. Measurement Uncertainty................................................................................................................. 321 19. SAR Test Equipment ......................................................................................................................... 322 20. Conclusion ........................................................................................................................................ 324 21. References ........................................................................................................................................ 325 Appendix A. DUT Ant. Information & Test SETUP PHOTO Appendix B. SAR Test Plots Appendix C. Dipole Verification Plots Appendix D. SAR Tissue Characterization Appendix E. SAR System Validation Appendix F. Probe Calibration Data Appendix G. Dipole Calibration Data Appendix H. Power reduction verification Appendix I. DLCA Power Measurement Appendix J. NR Band Pmax Conducted Power FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) Page 4 of 327 1. Test Regulations The tests documented in this report were performed in accordance with FCC CFR § 2.1093, IEEE 1528-2013, ANSI C63.26-2015 the following FCC Published RF exposure KDB procedures: - FCC KDB Publication 941225 D01 3G SAR Procedures v03r01 - FCC KDB Publication 941…

Text truncated - open the document above for the full version.

FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) 1 / 165 HCT CO.,LTD. Appendix B. – SAR Test Plots FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) 2 / 165 HCT CO.,LTD. Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Liquid Temperature: 18.2 °C Ambient Temperature: 18.4 °C Test Date: 09/05/2022 Plot No.: 1 Band: GSM 850 Head Measurement Report for SM-S911B/DS, CHEEK, GSM 850, GPRS-FDD (TDMA, GMSK, TN 0-1), Channel 190 (836.6 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity RightHead, HSL CHEEK, 0.00 GSM 850 GSM, 10024-DAC 836.6, 190 9.64 0.925 41.8 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2047 EX3DV4 - SN3903, 2022-03-29 DAE4 Sn1225, 2021-12-01 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 180.0 32.0 x 32.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 8.0 x 8.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Graded Grid Yes Yes Grading Ratio 1.5 1.5 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.290 0.309 psSAR10g [W/Kg] 0.201 0.241 Power Drift [dB] -0.16 0.16 FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) 3 / 165 HCT CO.,LTD. Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Liquid Temperature: 23.1 °C Ambient Temperature: 23.3 °C Test Date: 09/05/2022 Plot No.: 2 Band: GSM 1900 Head Communication System: UID 0, GSM 1900 2Tx (0); Frequency: 1880 MHz;Duty Cycle: 1:4.14954 Medium parameters used: f = 1880 MHz; σ = 1.399 S/m; ε r = 40.755; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: • Probe: EX3DV4 - SN7622; ConvF(8.71, 8.71, 8.71) @ 1880 MHz; Calibrated: 2021-11-24 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn466; Calibrated: 2022-05-02 • Phantom: Twin-SAM V4.0 (Left-Right); Type: QD 000 P40 CC; Serial: xxxx • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) GSM1900 2Tx Head Left Touch 661ch/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.184 W/kg GSM1900 2Tx Head Left Touch 661ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.186 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.229 W/kg SAR(1 g) = 0.145 W/kg; SAR(10 g) = 0.090 W/kg Maximum value of SAR (measured) = 0.199 W/kg 0 dB = 0.199 W/kg = -7.01 dBW/kg FCC ID: A3LSMS911B Report No: HCT-SR-2210-FC004-R2 F-TP22-03 (Rev.00) 4 / 165 HCT CO.,LTD. Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Liquid Temperature: 18.5 °C Ambient Temperature: 18.6 °C Test Date: 09/07/2022 Plot No.: 3 Band: UMTS Band 5 Head Measurement Report for SM-S911B/DS, CHEEK, Band 5, UTRA/FDD, UMTS-FDD (WCDMA), Channel 4183 (836.6 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity RightHead, HSL CHEEK, 0.00 Band 5, UTRA/FDD WCDMA, 10011-CAB 836.6, 4183 9.64 0.926 40.8 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2047 EX3DV4 - SN3903, 2022-03-29 DAE4 Sn1225, 2021-12-01 Scans Setup Area Scan Z…

Text truncated - open the document above for the full version.