A3LSMT365MMulti-band GSM/EDGE/WCDMA/LTE Tablet with WLAN, Bluetooth, RFID, ANT+

Accessing more information On your device, open the web browser and select the bookmark for the user manual from the bookmarks list. Visit www.samsung.com to view device information, the user manual, and more. The user manual may not be available depending on the web browser or service provider. SM-T365M Quick Start Guide Draft version 2014-12-12 Device layout To turn on the device, press and hold the Power button for a few seconds. Home button Back button Power button Volume button Recent apps button Multipurpose jack Ensure that the back cover is closed tightly to prevent water and dust entering the device. Open or loose back cover may allow water and dust to enter the device and cause damage. Installing the battery 1 2 Press Align 2 1 • Ensure that the back cover is closed tightly. • Use only Samsung-approved back covers and accessories with the device. Charging the battery Before using the device for the rst time, you must charge the battery. The charger should remain close to the electric socket and easily accessible while charging. Some content may dier from your device depending on the region, service provider, or software version, and is subject to change without prior notice. Correct disposal T o view more information about device and battery disposal, tap → Settings → General → About device → Legal information → Safet y information. This marking on the product, accessories or lit erature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is RoHS compliant. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste. Safety information To prevent injury, re, or explosion, read and adhere to all safety information before using the device. To view the full safety information, tap → Settings → General → About device → Legal information → Safety information. Warning • Use manufacturer-approved batteries, chargers, accessories, and supplies. • Do not expose the device to physical impact or damage. • Prevent the multipurpose jack and battery terminals from contacting conductive elements, such as metal or liquids. • Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 5 °C to 35 °C. • Do not store your device near or in heaters, microwaves, cooking equipment, or high pressure containers. • Do not touch the charger or the device with wet hands while the device is charging. • Do not use your device outdoor during a thunderstorm. • Turn o t he device in potentially explosive environments. • Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. • If the device is cracked, broken, or becomes very hot, stop using the device immediately and take it to a Samsung Service Centre. • Do not allow children or animals to chew or suck the device. • Do not poke eyes, ears, or other body parts with the device or insert the device into the mouth. • If the device has a camera ash or light, do not use it close to the eyes of people or animals. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. Your device uses a non-harmonised frequency and is intended for use in all European countries. The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors. Maintaining water and dust resistance The device may be damaged if water or dust enters the device. Follow these tips carefully to prevent damage to the device and to maintain the water- and dust-resistant performance of the device. • Do not immerse the device in water deeper than 1 m and keep it submerged for more than 30 minutes. • Do not expose the device to water moving with force, such as ocean waves or waterfalls. • Do not open the device's covers when the device is in water or in very humid places, such as swimming pools or bathrooms. • Do not open the back cover using wet hands or when the device is wet. • The rubb er seal tted to the back cover is an important component of the device. Take care when opening and closing the back cover to avoid damaging the rubber seal. Also, ensure that the rubber seal is free from debris, such as sand or dust to prevent damage to the device. • Do not expose the device to salt water, ionised water, or soapy water. • The back cover may be loosened if the device is dropped or receives an impact. Ensure that the back cover is properly aligned and tightly closed. • If the device has been immersed in water or the microphone or the speaker is wet, sound may not be heard clearly during a call. Ensure that the microphone or the speaker is clean and dry by wiping it with a dry cloth. • If the device gets wet, dry it thoroughly with a clean, soft cloth. • The water-resistant design of the device causes it to vibrate slightly in certain conditions. V ibrations in these conditions, such as when the volume level is high are normal and do not aect the device’s performance. • The touch screen and other features may not work properly if the device is used in water or in other liquids. Y our device has been tested in a controlled environment and certied to be water- and dust-resistant in specic situations ( meets requirements of classication IP67 as described by the international standard IEC 60529 - Degrees of P rotection provided by Enclosures [IP C ode]; test conditions: 1 5 - 35 °C, 8 6 - 106 kP a, 1 meter, 3 0 minutes). Despite this classication, your device is not impervious to water damage in any situation. Specic Absorption Rate (SAR) certication information T o view more information about the device’ s SAR certication, tap → Settings → General → About device → Legal information → Safety information. THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile is designed not to exceed the limits…

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: December 30, 2014 FCC ID: A3LSMT365M To whom it may concern: We, the undersigned, hereby authorize PCTEST Engineering Laboratory Inc., to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

December 15, 2014 Federal Communications Commiss ion 7435 Oakland Mills Road Co lumbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMT365M Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy of KDB 784748 D01. The label statement is as follows: The FCC ID shown in the FCC ID label page will be readily visible at the time of purchase because the device will be marketed without the battery installed. The label is permanently attached by acrylic glue and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Seoung Ho Park Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliance Group.

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: December 30, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LSMT365M To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics SHORT-TERM 4 External Photos 5 Internal Photos 6 Test-Setup Photos 7 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, CHANHO, YOUN General Manager American QA Lab SAMSUNG Electronics America INC.

Label and Loc at ion Samsung P honeModel:SM-T365M FCC ID:A3LSMT365M Label: Loc at ion: Top Back of devi ce Bottom

FCC ID: A3LSMT365M FCC Pt. 15.249 ANT+ TEST REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 22 0Y1411212146.A3L 11/15 - 12/05/14 Portable Tablet © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. 11/15 - 12/05/14 129, Samsung-ro, Maetan dong, Test Site/Location: Yeongtong-gu, Suwon-si PCTEST Lab. Columbia, MD, USA Gyeonggi-do 443-742, Korea Test Report Serial No.: 0Y1411212146.A3L FCC ID: A3LSMT365M APPLICANT: Samsung Electronics, Co. Ltd. Application Type: Certification Model(s): SM-T365M EUT Type: Portable Tablet Frequency Range: 2402 – 2480MHz FCC Classification: Low Power Communications Device Transmitter (DXX) FCC Rule Part(s): Part 15 Subpart C (15.249) Test Procedure(s): ANSI C63.10-2009 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2009. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC PART 15.249 ANT+ FCC ID: A3LSMT365M FCC Pt. 15.249 ANT+ TEST REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 22 0Y1411212146.A3L 11/15 - 12/05/14 Portable Tablet © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 TABLE OF CONTENTS FCC PART 15.249 MEASUREMENT REPORT .................................................................................................. 3 1.0 INTRODUCTION ...................................................................................................................................... 4 1.1 SCOPE ........................................................................................................................................................... 4 1.2 PCTEST TEST LOCATION ............................................................................................................................ 4 2.0 PRODUCT INFORMATION ..................................................................................................................... 5 2.1 EQUIPMENT DESCRIPTION......................................................................................................................... 5 2.2 DEVICE CAPABILITIES ................................................................................................................................. 5 2.3 TEST CONFIGURATION ............................................................................................................................... 5 2.4 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ...................................................................................... 5 3.0 DESCRIPTION OF TEST ........................................................................................................................ 6 3.1 EVALUATION PROCEDURE ......................................................................................................................... 6 3.2 AC LINE CONDUCTED EMISSIONS ............................................................................................................. 6 3.3 RADIATED EMISSIONS ................................................................................................................................ 7 3.4 ENVIRONMENTAL CONDITIONS ................................................................................................................. 7 4.0 ANTENNA REQUIREMENTS .................................................................................................................. 8 5.0 TEST EQUIPMENT CALIBRATION DATA .............................................................................................. 9 6.0 TEST RESULTS .................................................................................................................................... 10 6.1 SUMMARY ................................................................................................................................................... 10 6.2 OCCUPIED BANDWIDTH MEASUREMENT ............................................................................................... 11 6.3 DUTY CYCLE CALCULATION..................................................................................................................... 12 6.4 FUNDAMENTAL FIELD STRENGTH LEVEL MEASUREMENT .................................................................. 14 6.5 RADIATED SPURIOUS EMISSION MEASUREMENTS .............................................................................. 15 6.6 RADIATED RESTRICTED BAND EDGE MEASUREMENTS ...................................................................... 18 6.7 LINE CONDUCTED MEASUREMENT DATA .............................................................................................. 20 7.0 CONCLUSION ....................................................................................................................................... 22 FCC ID: A3LSMT365M FCC Pt. 15.249 ANT+ TEST REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 3 of 22 0Y1411212146.A3L 11/15 - 12/05/14 Portable Tablet © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 MEASUREMENT REPORT FCC Part 15.249 § 2.1033 General Information APPLICANT: Samsung Electronics, Co. Ltd. APPLICANT ADDRESS: 129, Samsung-ro, Maetan dong, Yeongtong-gu, Suwon-si, Gyeonggi-do 443-742, Korea TEST SITE: PCTEST ENGINEERING…

Text truncated - open the document above for the full version.

FCC ID: A3LSMT365M FCC Pt. 15.225 MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Date(s): EUT Type: Page 1 of 20 0Y1411212146.A3L 11/15 - 12/05/14 Portable Tablet © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. 11/15 - 12/05/14 129, Samsung-ro, Maetan dong, Test Site/Location: Yeongtong-gu, Suwon-si PCTEST Lab, Columbia, MD, USA Gyeonggi-do 443-742, Korea Test Report Serial No.: 0Y1411212146.A3L FCC ID: A3LSMT365M APPLICANT: Samsung Electronics, Co. Ltd. Application Type: Certification Model(s): SM-T365M EUT Type: Portable Tablet Frequency: 13.56MHz FCC Classification: Low Power Communications Device Transmitter (DXX) FCC Rule Part(s): FCC Part 15 Subpart C (15.225) Test Procedure(s): ANSI C63.10-2009 The device bearing the FCC Identifier specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and has been tested in accordance with the measurement procedures specified in ANSI C63.10-2009 (See Test Report). These measurements were performed with no deviation from the standards. Test results reported herein relate only to the item(s) tested. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NVLAP accreditation does not constitute any product endorsement by NVLAP or any agency of the United States Government. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 15.225 NFC FCC ID: A3LSMT365M FCC Pt. 15.225 MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Date(s): EUT Type: Page 2 of 20 0Y1411212146.A3L 11/15 - 12/05/14 Portable Tablet © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 TABLE OF CONTENTS FCC Part 15.225 MEASUREMENT REPORT ............................................................................................. 3 1.0 INTRODUCTION .............................................................................................................................. 4 1.1 SCOPE .................................................................................................................................................. 4 1.2 PCTEST TEST LOCATION ................................................................................................................... 4 2.0 PRODUCT INFORMATION .............................................................................................................. 5 2.1 EQUIPMENT DESCRIPTION ................................................................................................................ 5 2.2 DEVICE CAPABILITIES ........................................................................................................................ 5 2.3 TEST CONFIGURATION ...................................................................................................................... 5 2.4 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ............................................................................. 5 3.0 DESCRIPTION OF TEST ................................................................................................................. 6 3.1 EVALUATION PROCEDURE ................................................................................................................ 6 3.2 AC LINE CONDUCTED EMISSIONS .................................................................................................... 6 3.3 RADIATED EMISSIONS ........................................................................................................................ 7 3.4 ENVIRONMENTAL CONDITIONS ........................................................................................................ 7 4.0 ANTENNA REQUIREMENTS .......................................................................................................... 8 5.0 SAMPLE CALCULATIONS .............................................................................................................. 9 5.1 CONDUCTED EMISSION MEASUREMENT SAMPLE CALCULATION ............................................... 9 5.2 RADIATED EMISSION MEASUREMENT SAMPLE CALCULATION .................................................... 9 6.0 TEST EQUIPMENT CALIBRATION DATA .................................................................................... 10 7.0 TEST DATA .................................................................................................................................... 11 7.1 SUMMARY .......................................................................................................................................... 11 7.2 20DB BANDWIDTH MEASUREMENT ................................................................................................ 12 7.3 FREQUENCY STABILITY TEST DATA ............................................................................................... 13 7.4 IN-BAND RADIATED SPURIOUS EMISSION MEASUREMENTS ...................................................... 15 7.5 RADIATED SPURIOUS EMISSION MEASUREMENTS, OUT-OF-BAND .......................................... 16 7.6 LINE CONDUCTED MEASUREMENT DATA ..................................................................................... 18 8.0 CONCLUSION ................................................................................................................................ 20 FCC ID: A3LSMT365M FCC Pt. 15.225 MEASUREMENT REPORT (CERTIFICATIO…

Text truncated - open the document above for the full version.

Samsung Electronics, Co. Ltd. FCC ID: A3LSMT365M Model: SM-T365M Test Set-Up Photos EUT Type: Portable Tablet Page 1 of 3 © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 TEST SETUP PHOTOGRAPHS Samsung Electronics, Co. Ltd. FCC ID: A3LSMT365M Model: SM-T365M Test Set-Up Photos EUT Type: Portable Tablet Page 2 of 3 © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014 Samsung Electronics, Co. Ltd. FCC ID: A3LSMT365M Model: SM-T365M Test Set-Up Photos EUT Type: Portable Tablet Page 3 of 3 © 2014 PCTEST Engineering Laboratory, Inc. V 1.31 11/19/2014