A3LSPHA840Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/ CDMA)

DIGITAL CELLULAR TELEPHONE SPH-A840 User’s Manual Printed in Korea Code No. : GH68-00000A English. 4/05. Rev.1.0 World Wide Web http://www.samsungmobile.com ELECTRONICS Please read this manual before operating your phone, and keep it for future reference . Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refueling Do not use the phone at a refueling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch off your phone near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). 1 YOUR PHONE Unpacking ........................................................................................... 4 Key Descriptions ................................................................................... 5 Display ................................................................................................ 6 Built-in Antenna..................................................................................... 6 GETTING STARTED Charging a Battery .................................................................................9 Switching the Phone On/Off ................................................................ 11 CALL FUNCTIONS Making a Call ......................................................................................12 Answering a Call .................................................................................. 17 In-Call Options .................................................................................... 18 Using Caller ID .................................................................................... 19 Viewing Missed Calls ........................................................................... 20 Three-Way Calling ............................................................................... 21 Call Waiting ........................................................................................ 22 Call Forwarding ....................................................................................22 Adjusting the Volume ........................................................................... 23 ENTERING TEXT Changing Text Input Mode ................................................................... 24 T9 Mode .............................................................................................. 25 Alpha Mode ..........................................................................................26 Symbol Mode ...................................................................................... 28 Number Mode ..................................................................................... 28 Table of Contents Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Emergency Call Ensure the phone is switched on and in service. Key in the emergency number for your present location, then press TALK. If certain feature are in use, deactivate those features before you can make an emergency call. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so. Water Resistance Your phone is not water-resistance. Keep it dry. Accessories and Batteries Use only Samsung-approved accessories and batteries. Qualified Service Only qualified service personnel may install or repair your phone. For more detailed safety information, see “Health and Safety Information” on page 65. 23 USING THE MENUS Accessing a Menu Functions by Scrolling .............................................. 29 Accessing a Menu Functions by Using its Shortcut.................................. 30 Your Phone’s Main Menu .................................................................... 31 CALL HISTORY Missed Calls(MENU 1-1) ............................................................... 33 Outgoing Calls (MENU 1-2) ........................................................... 34 Incoming Calls (MENU 1-3) ........................................................... 35 Erase History (MENU 1-4).............................................................. 36 CONTACTS Find (MENU 2-1)........................................................................... 37 Add New Entry (MENU 2-2)........................................................ 39 My Phone # (MENU 2-3)................................................................ 41 Speed Dial # (MENU 2-4)............................................................... 41 Group Setting (MENU 2-5)............................................................ 41 Services (MENU 2-6)...................................................................... 42 MESSAGING Send Message (MENU3-1).............................................................. 43 Text (MENU 3-2)............................................................................ 43 Picture Mail (MENU 3-3)................................................................. 44 Voice SMS (MENU 3-4).................................................................... 44 Email (MENU 3-5).......................................................................... 44 Instant Message (MENU 3-6).......................................................... 44 Voicemail (MENU 3-7).................................................................... 44 Settings (MENU 3-8)....................................…

Text truncated - open the document above for the full version.


  
       















 
  
















 
 








April 26, 2005       !"# $%&' ( &) "*   +,-   . / (0+1+//2(34 (5 /5 ///5 /4(0+1+// 2( 34(5555,4  .(5(65(5 / (5 1 # )57/(5)8 )94144 *4    1    1: ;&/ 1&19<;3<4












  
     
















 
















 




April 26, 2005
! 
 "" 
 "" 
#$%" 
 &
' 
()
*+  !

, !
 "-

)


 .
/01
#  
 23!

.
A3LSPHA840 , $ 
5 
 5!  

1  " .


 ! 
6
2)
5
 ,
)(
/01
#  
 2
3!
  -
 $ 

 5!  
5

' +
7" 

7" 

 % 
8
3 

 !
*%  
 %
" 
5 

-9 
%%  2

:
! " 
 
!  !
  "
 !
$%" 
! %
 !
  !
 5 "

- 

% !
6
/01
#  
 2
3!
 ! 
-  7
% % 

 5!  
 !

  "
! 7
 !
 6 
6  !

 


7 
%- 2

 


! 7


- 
5 "
6
5
  7
% !
6
  
/01

#  
 2
3!
 ! 


 5 "
6  !
-
5
- 5


 "%   
 !


!  
5

 5 "


! " 
6  !
7
 "%  

 5
! 7


"+ 2


   



 
;"
<
" 
=
3-
/01
#  
" 
0













































  
     
















 
















 




April 26, 2005

! 
 "" 
 "" 
 #
 !
$ 
%
$&'" 
 #
( 
)*
+,  !

- !
 ".

*



 /
012
$  
 %
3!%

/
A3LSPHA840 - & 
5 
 67 "
 5!  


7
8 "


   /


 ! 
9
%*)
 !
%*
5
 -
*)
012
$  
 %
3!%
 & 
 6  "
 5!  
5 

 
'
'  
:  
'  
   
'  
 !
 ;
" 
5

 !
 
 ' %

7
! " 
 
!  !
  "
 !
&'" 
! '
 !
  !
 5 "
. 

' !
9
012
$  
 %3!

 ! 

.
' ' 
 5!  
 !

  "
! <
 !
 9 
9  !

 


< 
'. %
 

! <


. 
5 "
9
5
  <
' !
9
 
012
$  
 %
3!
5


 5 "
9  !
.
5
. 5


 "'   
 !


!  
5

 5 "


! " 
9  !
<

 "'  

 5
! <


", %


   


 
="
>
" 
?
3.
012
$  
" 
1%













  
     
















 
















 







  
  
  
!" 
"" 
 
#$
%&  

' 
 (

$


    
  !"""  )   *

  +
 
 ,
-,
  (.
 /


  +
  
 "
0
*
A3LSPHA840), using the Automatic A/B Roaming - Intelligent Retry method, meets the E911
 !  
" / 

 
,
/


' ,
8
"  
9
  + :
9

;<<=



 


 
9
 
 .
" + +


 (
 

  

   +
/

<

 
" 



(
  
(.
 
  +

  ,

  
. 

 .
! 

  
    +

(  
" 
 

   + ,

   .


 
>
5
 
?
-(
@A)
 
 
A,

© 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA)

<Label> <Location>

© 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA)

SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 442-742 TEST REPORT ON SAR Model Tested: SPH-A840 FCC ID (Requested): A3LSPHA840 Job No: FC-042 Report No: FC-042-S1 Date issued: Apr. 22,2005 - Abstract – This document reports on SAR Tests carried out in accordance with FCC/OET Bulletin 65, Supplement C(July 2001). Prepared By Date KS AN – Test Engineer Checked By Date SH PARK – Senior Manager Authorized By Date JK CHOI –General Manager 2005.04.22 2005.04.22 2005.04.22 Report Number : FC-042-S1 2 of 36 Contents 1. General Information.............................................................................................3 2. Description of Device...........................................................................................3 3. Description of Test Equipment..............................................................................4 3.1 SAR Measurement Setup.........................................................................................4 3.2 DASY3 E-Field Probe.............................................................................................5 3.3 SAM Phantom.....................................................................................................6 3.4 Brain & Muscle Simulating Mixture Characterization....................................................7 3.5 Device Holder for transmitters.................................................................................8 3.6 Validation Dipole...................................................................................................8 3.7 Equipment Calibration.............................................................................................9 4. SAR Measurement Procedure.............................................................................10 5. Description of test position..............................................................................11 5.1 SAM Phantom Shape............................................................................................11 5.2 Cheek/Touch Position............................................................................................11 5.3 Ear/Tilt 15 Position..............................................................................................13 5.4 Body/Holster/Belt Clip Configuration.......................................................................14 6. Measurement Uncertainty..................................................................................16 7. System Verification.........................................................................................18 7.1 Tissue Verification..............................................................................................18 7.2 Test System Validation...........................................................................................18 8. SAR Measurement Results.................................................................................19 8.1 Measurement Results(AMPS Right Head SAR-Touch)...............................................20 8.2 Measurement Results(AMPS Right Head SAR-Tilt)...................................................21 8.3 Measurement Results(AMPS Left Head SAR-Touch)...................................................22 8.4 Measurement Results(AMPS Left Head SAR-Tilt).......................................................23 8.5 Measurement Results(CELLULAR CDMA Right Head SAR-Touch)..............................24 8.6 Measurement Results(CELLULAR CDMA Right Head SAR-Tilt)..............................25 8.7 Measurement Results(CELLULAR CDMA Left Head SAR-Touch)..............................26 8.8 Measurement Results(CELLULAR CDMA Left Head SAR-Tilt)..............................27 8.9 Measurement Results(PCS CDMA Right Head SAR-Touch)........................................28 8.10 Measurement Results(PCS CDMA Right Head SAR-Tilt)............................................29 8.11 Measurement Results(PCS CDMA Left Head SAR-Touch)..........................................30 8.12 Measurement Results(PCS CDMA Left Head SAR-Tilt)..............................................31 8.13 Measurement Results(AMPS Body SAR w/o Holster).................................................32 8.14 Measurement Results(CELLULAR CDMA Body SAR w/o Holster)................................33 8.15 Measurement Results(PCS CDMA Body SAR w/o Holster)..........................................34 9. Conclusion.......................................................................................................35 10. Reference......................................................................................................36 Report Number : FC-042-S1 3 of 36 1. GENERAL INFORMATION Test Sample : Tri-Mode Dual-Band Analog / PCS Phone (AMPS/CDMA) Model Number : SPH-A840 Serial Number : Identical prototype (S/N :#FC-042-G) Manufacturer : SAMSUNG ELECTRONICS Co., Ltd. Contact : JM CHA Phone : +82-31-279-6271 Fax : +82-31-279-6323 Test Standard : §2.1093; FCC/OET Bulletin 65, Supplement C(July 2001) FCC Classification : Licensed Portable Transmitter Held to Ear (PCE) Test Dates : Apr 18. 2005 ~ Apr 19. 2005 Tested for : FCC/TCB Certification 2. DESCRIPTION OF DEVICE Tx Freq. Range : 824.04 – 848.97 MHz (AMPS) / 824.70 – 848.31 MHz (CDMA) 1851.25 – 1908.75 MHz (PCS CDMA) Rx Freq. Range : 869.04 – 893.97 MHz (AMPS) / 869.70 – 893.31 MHz (CDMA) 1931.25 – 1988.75 MHz (PCS CDMA) Max. RF Output Power : 0.375 W ERP AMPS (25.74 dBm) 0.318 W ERP CDMA (25.03 dBm) 0.362 W EIRP PCS (25.59 dBm) Antenna Manufacturer : Galtronics Model No. : SPH-A880 Antenna Dimensions : 38.1*13.6*10 [mm] Report Number : FC-042-S1 4 of 36 3. DESCRIPTION OF TEST EQUIPMENT 3.1 SAR Measurement Setup Robotic System Measurements are performed using the DASY3 automated dosimetric assessment system. Which is made by Schmid & Partner Engineering AG (SPEAG) in Zurich, Switzerland and consists of high pre…

Text truncated - open the document above for the full version.

SAMSUNG FCC ID : A3LSPHA840 835MHz AMPS Head SAR DUT: SPH-A840; Serial: FC-042-G Program Name: SPH-A840 AMPS Right (Job No. : FC-042) Procedure Name: Cheek/Touch, Ch.0991, Intenna, Bat. Extended Procedure Notes: Meas.Tissue Temp(celsius)-21.3;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: AMPS; Frequency: 824.04 MHz;Duty Cycle: 1:1 Medium parameters used: f = 824.04 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek/Touch, Ch.0991, Intenna, Bat. Extended/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.965 mW/g Cheek/Touch, Ch.0991, Intenna, Bat. Extended/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.6 V/m; Power Drift = 0.023 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.896 mW/g Maximum value of SAR (measured) = 0.961 mW/g 0 dB = 0.961mW/g SAMSUNG FCC ID : A3LSPHA840 835MHz AMPS Head SAR DUT: SPH-A840; Serial: FC-042-G Program Name: SPH-A840 AMPS Right (Job No. : FC-042) Procedure Name: Ear/Tilt, Ch.0383, Intenna, Bat. Extended Procedure Notes: Meas.Tissue Temp(celsius)-21.3;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: AMPS; Frequency: 836.49 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.49 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Ear/Tilt, Ch.0383, Intenna, Bat. Extended/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.223 mW/g Ear/Tilt, Ch.0383, Intenna, Bat. Extended/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.41 V/m; Power Drift = -0.046 dB Peak SAR (extrapolated) = 0.272 W/kg SAR(1 g) = 0.214 mW/g Maximum value of SAR (measured) = 0.223 mW/g 0 dB = 0.223mW/g SAMSUNG FCC ID : A3LSPHA840 835MHz AMPS Head SAR DUT: SPH-A840; Serial: FC-042-G Program Name: SPH-A840 AMPS Left (Job No. : FC-042) Procedure Name: Cheek/Touch, Ch.0991, Intenna, Bat. Extended Procedure Notes: Meas.Tissue Temp(celsius)-21.3;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: AMPS; Frequency: 824.04 MHz;Duty Cycle: 1:1 Medium parameters used: f = 824.04 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek/Touch, Ch.0991, Intenna, Bat. Extended/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.7 V/m; Power Drift = 0.041 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.875 mW/g Maximum value of SAR (measured) = 0.899 mW/g Cheek/Touch, Ch.0991, Intenna, Bat. Extended/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.967 mW/g 0 dB = 0.967mW/g SAMSUNG FCC ID : A3LSPHA840 835MHz AMPS Head SAR DUT: SPH-A840; Serial: FC-042-G Program Name: SPH-A840 AMPS Left (Job No. : FC-042) Procedure Name: Ear/Tilt, Ch.0383, Intenna, Bat. Extended Procedure Notes: Meas.Tissue Temp(celsius)-21.3;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: AMPS; Frequency: 836.49 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.49 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Ear/Tilt, Ch.0383, Intenna, Bat. Extended/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.206 mW/g Ear/Tilt, Ch.0383, Intenna, Bat. Extended/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.75 V/m; Power Drift = 0.067 dB Peak SAR (extrapolated) = 0.240 W/kg SAR(1 g) = 0.192 mW/g Maximum value of SAR (measured) = 0.197 mW/g 0 dB = 0.197mW/g SAMSUNG FCC ID : A3LSPHA840 835MHz CDMA Head SAR DUT: SPH-A840; Serial: FC-042-G Program Name: SPH-A840 CDMA Right (Job No. : FC-042) Procedure Name: Cheek/Touch, Ch.1013, Intenna, Bat. Extended Procedure Notes: Meas.Tissue Temp(celsius)-21.3;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: f = 824.7 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek/Touch, Ch.1013, Intenna, Bat. Extended/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.736 mW/g Cheek/Touch, Ch.1013, In…

Text truncated - open the document above for the full version.

© 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2004 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) 1.5Cm © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2004 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2004 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2004 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2004 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSPHA840 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA)

SAMSUNG FCC ID : A3LSPHA840 835MHz AMPS/CDMA V alidation DUT: Dipole 835 MHz; Serial: 4d014 Program Name: 835MHz Dipole Validation 2005.04.19 Procedure Name: 835MHz @ 250mW Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-19/Apr/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.91 mho/m; ε r = 40.9; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 835MHz @ 250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.0 V/m; Power Drift = -0.012 dB Peak SAR (extrapolated) = 3.65 W/kg SAR(1 g) = 2.43 mW/g Maximum value of SAR (measured) = 2.62 mW/g 835MHz @ 250mW/Area Scan (51x51x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 2.61 mW/g 0 dB = 2.61mW/g SAMSUNG FCC ID : A3LSPHA840 1900MHz PCS V alidation DUT: Dipole 1900 MHz; Serial: 5d023 Program Name: 1900 Dipole Validation 2005.04.18 Procedure Name: 1900MHz @250mW Procedure Notes: Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.39 mho/m; ε r = 38.4; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(8.29, 8.29, 8.29); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 1800/1900 MHz; Type: SAM; Serial: TP-1248 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 1900MHz @250mW/Area Scan (51x51x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 14.2 mW/g 1900MHz @250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 88.1 V/m; Power Drift = -0.092 dB Peak SAR (extrapolated) = 18.5 W/kg SAR(1 g) = 9.98 mW/g Maximum value of SAR (measured) = 11.2 mW/g 0 dB = 11.2mW/g

SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416 Maetan3-Dong, Yeongtong-gu, Suwon city, Gyeonggi-Do, Korea 442-742 FCC CFR47 PART 22 & 24 SUBPART CERTIFICATION REPORT Model Tested: SPH-A840 FCC ID (Requested): A3LSPHA840 Report No: FC-042-R1 Job No: FC-042 Date issued: April 21, 2005 - Abstract – All measurement reported herein accordance with FCC Rules, 47CFR Part2, Part22, Part24. Prepared By Date SS LEE – Test Engineer Checked By Date SH PARK – Senior Manager Authorized By Date JK CHOI – General Manager © Copyright SAMSUNG Electronics 2005 Report Number : FC-042-R1 TABLE OF CONTENT MEASUREMENT REPORT Page 1. FCC Certification Information 3 1.1 2.1033 General Information 3 2. INTRODUCTION 4 2.1 General 4 3. MEASURING INSTRUMENT CALIBRATION 5 4. TEST EQUIPMENT LIST 6 5. DESCRIPTION OF TESTS 7 5.1 Effective Radiated Power/Equivalent Isotropic Radiated Power 7 5.2 Radiated Spurious & Harmonic Emission 8 5.3 Occupied Bandwidth 10 5.4 Spurious and Harmonic Emissions at Antenna Terminal 10 5.4.1 Occupied Bandwidth Emission Limits 10 5.4.2 Conducted Spurious Emission 11 5.5 Frequency Stability / Temperature Variation 12 6. TEST DATA 13 6.1 Effective Radiated Power(E.R.P.) 13 6.2 Equivalent Isotropic Radiated Power(E.I.R.P.) 14 6.3 Cellular CDMA Radiated Spurious & Harmonic Measurement 15 6.4 PCS CDMA Radiated Spurious & Harmonic Measurement 16 6.5 CDMA Radiated Spurious & Harmonic Conversion Table 17 6.6 PCS Radiated Spurious & Harmonic Conversion Table 18 6.7 Frequency Stability 19 6.7.1 CDMA Frequency Stability Table 19 6.7.2 PCS Frequency Stability Table 20 6.7.3 CDMA Frequency Stability Graph 21 6.7.4 PCS Frequency Stability Graph 23 7.SAMPLE CALCULATION 25 7.1 Emission Designator 8. CONCLUSION 26 9. TEST PLOTS 27 Report Number : FC-042-R1 MEASUREMENT REPORT 1. FCC Certification Information The following information is in accordance with FCC Rules, 47CFR Part2, Subpart J, Sections 2.1033 – 2.1055. 2.1033 General Information Applicant Name: SAMSUNG ELECRONICS CO., LTD. Address: 416 Maetan3-Dong, Yeongtong-gu, Suwon City Gyeonggi-Do, Korea 442-742 Attention: FCC ID: SungJoo KIM, Engineering …

Text truncated - open the document above for the full version.