A3LVGTM2560SMART CONTROL

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea (November 8, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (A3LVGTM2560) [Samsung Electronics Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Jenni Chun Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea (November 8, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (A3LVGTM2560) [Samsung Electronics Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jenni Chun

Attestation Statements (November 8, 2024) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (A3LVGTM2560) (Samsung Electronics Co., Ltd.), the undersigned, hereby authorize (Samsung Electronics Co., Ltd.) to act as our designated U.S. agent for service of process, (Samsung Electronics Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Samsung Electronics Co., Ltd.) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Samsung Electronics Co., Ltd. Contact Name: Jenni Chun Address: 129, Samsung-ro, Yeongtong-gu Suwon-si Gyeonggi-do 16677 FRN: 0027908797 Telephone No: (973) 808-6375 Email: [email protected] U.S. Agent Information: Company Name: Samsung Electronics America, Inc. Address: 19 Chapin Rd.Building DPine Brook, NJ 07058United States FRN: 0027908797 Contact Name: Jenni Chun Telephone No: (973) 808-6375 Email: [email protected] Applicant Signature: Agent Signature: (if the agent is different from the applicant) Applicant printed name: Jenni Chun Agent printed name:

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: November 8, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR SMART CONTROL / VG-TM2560 / A3LVGTM2560 This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be permanently withheld from public review. Permanent Confidential Request -. Schematics -. Block Diagram -. Operational Description SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Jenni Chun, General manager

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: November 8, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR SMART CONTROL / VG-TM2560 / A3LVGTM2560 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be short-term Confidentiality for a period of 180 days after grant is issued. Short-Term Confidential Request -. External Photos -. Internal Photos -. Test set-up photo -. User Manual SPECIFY REASON FOR REQUEST (i.e. These documents contain detailed system and equipment descriptions and related information about the product, which we considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, we feel that this information would be of benefit to our competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Jenni Chun, General manager

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: November 8, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Ms. Hyowon Jeong / Staff of Eurofins KCTL Co.,Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Jenni Chun, General manager

19 Chapin Rd, Building D. Pine Brook, New Jersey Tel No : 973-808-6375 Fax No : - Date: 2024-11-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. IC : 649E-VGTM2560 Product/ Model Number : SMART CONTROL / VG-TM2560 Addition of Variant Optionas follow: - Basic Model name : VG-TM2560 Model VG-TM2560 Option CP Key : 4 (Basic) CP Key : 0 (Variant Option) Photo (Front) Photo (Inside) The difference is simply the number of CP (Content Provider) buttons on the exterior of the case. The internal circuitry is exactly the same. The device remain electrically, Software Configuration and mechanically identical to the originally certified device and no changes have been made. Sincerely, NAME: Steve Choi TITLE: Senior professional Applicant: Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea

2.4 Label 2.4.1 Label Size and Specification 2.4.2 Location SPECIFICATION COLOR TEXT :GRAY BACK GROUND : BLACK MATERIALWHITE U4 PAPER (0.1t) 25.5mm 21.0mm R0.9 KQA-2V08 F1R0('98,07.01) Copyright ⓒ SAMSUNG Corp. All rights reserved. 무단 복제 금지 1/1 SAMSUNG ELECTRONICS CO., LTD

This test report shall not be reproduced, except in full, without the written approval * RF Exposure FCC ID: A3LVGTM2560 1. Regulation According to the KDB 447498 D01 V06, the following RF exposure evaluation shall to demonstrate RF exposure compliance. Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops and tablets, etc. a) For 100 ㎒ to 6 ㎓ and test separation distances ≤ 50 ㎜, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, ㎽) / (min. test separation distance, ㎜)] · [√f(㎓)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR,30 where ● f(㎓) is the RF channel transmit frequency in ㎓ ● Power and distance are rounded to the nearest ㎽ and mm before calculation ● The result is rounded to one decimal place for comparison ● The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 ㎜, and for transmission frequencies between 100 ㎒ and 6 ㎓. When the minimum test separation distance is < 5 ㎜, a distance of 5 ㎜ according to 4.1 f) is applied to determine SAR test exclusion. b) For 100 ㎒ to 6 ㎓ and test separation distances > 50 ㎜, the 1-g and 10-g SAR test exclusion thresholds are determined by the following (also illustrated in Appendix B): 1) {[Power allowed at numeric threshold for 50 ㎜ in step a)] + [(test separation distance – 50 ㎜)·(f(㎒)/150)]} ㎽, for 100 ㎒ to 1500 ㎒ 2) {[Power allowed at numeric threshold for 50 ㎜ in step a)] + [(test separation distance – 50 ㎜)·10]} ㎽, for > 1500 ㎒ and ≤ 6 ㎓ c) For frequencies below 100 ㎒, the following may be considered for SAR test exclusion (also illustrated This test report shall not be reproduced, except in full, without the written approval in Appendix C): 1) For test separation distances > 50 ㎜ and < 200 ㎜, the power threshold at the corresponding test separation distance at 100 ㎒ in step b) is multiplied by [1 + log(100/f(㎒))] 2) For test separation distances ≤ 50 ㎜, the power threshold determined by the equation in c) 1) for 50 ㎜ and 100 ㎒ is multiplied by ½ 3) SAR measurement procedures are not established below 100 ㎒. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any SAR test results below 100 ㎒ to be acceptable. 2. Result 2-1. Calculation Result of RF Exposure Mode Test frequency [㎒] Max. tune-up Power [㏈m] Max. tune-up Power [㎽/] Min. test separation distance [㎜] SAR test exclusion thresholds ≤ 3.0 for 1-g SAR BLE/1 Mbps 2 402 9.00 7.94 5.00 2.46 Note: 1. SAR test exclusion thresholds = [(max. power of channel, including tune-up tolerance, ㎽)/(min. test separation distance, ㎜)] · [√f(㎓)] = [(7.94)/(5)] · [√2.402] = 2.46 3. RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation.

UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 1 OF 8 - ACA-3216-A1-CC-S Specification 1. Features and Application



This product is for WiFi/BT band 2. Explanation of Part Number



AC A - 3216 - A1 - CC - S _ (1) (2) (3) (4) (5) (6) (7) (1) Product Type
Chip Antenna (2) Center Frequency/Band Code
2.4 GHz Band (3) Size Code
3.2*1.6 mm (Length * Width) (4) Design Revision Code
Rev.1 (5) Antenna Type
Coupling Ceramics (6) Special Code
RoHS Compliant (7) Suffix For Special Requirements 3. Electrical Specification



Item Specification Frequency Band 2400 ~ 2500 MHz Polarization Linear Impedance 50 ohm Typ. VSWR Less than 2.5 *Peak Gain 0.97 dBi Typ. *Peak Efficiency 71.1 % Typ. * Test condition Test board size 100*50 mm Matching circuit may be required UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 2 OF 8 - 4. Physical Dimension



Top view Bottom view Side view L 3.20 ± 0.30 W 1.70 ± 0.20 H 0.50 ± 0.10 A 0.30 ± 0.15 B 0.30 ± 0.15 L1 0.47 ± 0.20 W1 0.70 ± 0.20 (Unit mm) 5. Recommended PCB Layout



Layout H B A L W L1 W1 2.4 GHz Pad (GND) Pad (Feed) Feed Line (50 ohm) Pad (GND) Clearnace Area (8.5*6.5 mm) Ground UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 3 OF 8 - Pad Dimensions on PCB Layout Top View Perspective View (Unit
mm) * Tolerance
±0.05 mm UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 4 OF 8 - 6. Electrical Characteristics



Return Loss Frequency (MHz) VSWR 2400 1.84 2450 1.15 2500 1.99 Radiation Pattern



The Gain pattern is measured in INPAQ’s FAR-field chamber. DUT is placed on the table of rotator, a standard horn antenna and Vector Network Analyzer is used to collect data. 3D Chamber Definition UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 5 OF 8 - 3D Gain Pattern 2450 MHz UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 6 OF 8 - 7. Taping Package and Label Marking



(1) Quantity
4000pcs/Reel, T(Thickness of chip)1.2 (2) Plastic Tape Type W A B K t F P 3216 8±0.1 1.9~2.1 3.50~3.60 Max. 1.40 0.22±0.05 3.50±0.1 4.00±0.1 (Unit: mm) (3) Tape Packing (4) Cover Tape Reel Off Force (5) Reel Dimensions (Unit: mm) W A B 8±0.5 178±0.5 13±0.5 12±0.5 178±0.5 13±0.5 UNLESS OTHER SPECIFIED TOLERANCES ON Xဲ ဲဲ ဲ ! !! ! X.Xဲ ဲဲ ဲ ! !! ! X.XXဲ ဲဲ ဲ ANGLESဲ ဲဲ ဲ ! !! ! HOLEDIAဲ ဲဲ ဲ ! !! ! " "" " INPAQ TECHNOLOGY CO., LTD.   SCALE# ## # ----- UNIT# ## #mm DRAWN BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ CHECKED BY:ᠰ☗␥ ᠰ☗␥ᠰ☗␥ ᠰ☗␥ DESIGNED BY:≷倄╀ ≷倄╀≷倄╀ ≷倄╀ APPROVED BY:䉃ᑠ䢈 䉃ᑠ䢈䉃ᑠ䢈 䉃ᑠ䢈 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE# ## #ACA-3216-A1-CC-S Specification NO. ENS000069320 A1 PAGE 7 OF 8 - 8. Environmental Characteristics



(1) Reliability Test Item Condi…

Text truncated - open the document above for the full version.

KCTL-TIR001-003/7 (220705) KP24-07387 TEST REPORT Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-5008-1021 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR24-SRF0160 Page (1) of (38) 1. Applicant ◦ Name : Samsung Electronics Co., Ltd. ◦ Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea ◦ Date of Receipt : 2024-11-04 2. Use of Report : Certification 3. Name of Product / Model : SMART CONTROL / VG-TM2560 4. Manufacturer / Country of Origin : Samsung Electronics Co., Ltd. / Korea, Vietnam, Indonesia, Thailand 5. FCC ID : A3LVGTM2560 6. IC Certificate No. : 649E-VGTM2560 7. Date of Test : 2024-11-05 to 2024-11-20 8. Location of Test : ■ Permanent Testing Lab □ On Site Testing (Address:65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea) 9. Test method used : FCC Part 15 Subpart C, 15.247 RSS-247 Issue 3 August 2023 RSS-Gen Issue 5 February 2021 10. Test Result : Refer to the test result in the test report Affirmation Tested by Technical Manager Name : Sehwan Park (Signature) Name : Heesu Ahn (Signature) 2024-11-26 Eurofins KCTL Co.,Ltd. As a test result of the sample which was submitted from the client, this report does not guara ntee the whole product quality. This test report should not be used and copied without a written agreement by Eurofins KCTL Co.,Ltd. verify No.544675576977 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-5008-1021 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR24-SRF0160 Page (2) of (38) KCTL-TIR001-003/7 (220705) KP24-07387 REPORT REVISION HISTORY Date Revision Page No 2024-11-26 Originally issued - This report shall not be reproduced except in full, without the written approval of Eurofins KCTL Co.,Ltd. This document may be altered or revised by Eurofins KCTL Co.,Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Eurofins KCTL Co.,Ltd. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-5008-1021 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR24-SRF0160 Page (3) of (38) KCTL-TIR001-003/7 (220705) KP24-07387 CONTENTS 1. General information ......................................................................................................4 2. Device information ........................................................................................................4 2.1. Accessory information ............................................................................................4 2.2. Information about derivative model .........................................................................5 2.3. Frequency/channel operations................................................................................5 2.4. RF power setting in TEST SW ................................................................................5 2.5. Duty Cycle Factor ...................................................................................................6 3. Antenna requirement ....................................................................................................7 4. Summary of tests ..........................................................................................................8 5. Measurement uncertainty .............................................................................................9 6. Measurement results explanation example ................................................................ 10 7. Test results ................................................................................................................. 11 7.1. Maximum peak output power ................................................................................ 11 7.2. Peak Power Spectral Density ............................................................................... 14 7.3. 6 ㏈ Bandwidth(DTS Channel Bandwidth) & 99% Bandwidth ............................. 16 7.4. Spurious Emission, Band Edge and Restricted bands .......................................... 20 7.5. Conducted Spurious Emission .............................................................................. 34 7.6. AC Conducted emission ....................................................................................... 36 8. Measurement equipment ............................................................................................ 38 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-5008-1021 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR24-SRF0160 Page (4) of (38) KCTL-TIR001-003/7 (220705) KP24-07387 1. General information Applicant : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Manufacturer : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Factory 1 : REMOTE SOLUTION VIETNAM CO., LTD Address 1 : Lot D-5H-CN, My Phuoc 3 Industrial Park, Thoi Hoa Ward, Ben Cat Town, Binh Duong Province, Vietnam Factory 2 : PT Samjin Address 2 : Bekasi International Industrial Estate, Jl. Inti Raya Block C2 No. 10, Kel. Sukaresmi, Ke…

Text truncated - open the document above for the full version.