A3LWB30FDigital Camera

Playback/Editing 95 Transferring files to your Windows computer No.Description 1 Open menus. 2 Display files in the selected folder. 3 Switch to the Photo edit mode. 4 Switch to the Video edit mode. 5 Switch to the Sharing mode (to send files by email or upload files to websites, such as Flickr or YouTube). 6 Enlarge or reduce the thumbnails in the list. 7 Select a file type. 8 View files in the selected folder on your computer. 9 Show or hide files on the connected camera. 0 View files in the selected folder on the camera. ! View files as thumbnails or on a map. @ Browse folders stored on the camera. # Browse folders stored on your computer. $ Move to the previous or next folder. % Print files, view files on a map, store files in My Folder, or register faces. Transferring files by connecting the camera as a removable disk Connect the camera to your computer as a removable disk. 1 Rotate the mode dial to . 2 Select Connectivity → PC Software → Off. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Playback/Editing 96 Transferring files to your Windows computer Disconnecting the camera (for Windows XP) With Windows Vista and Windows 7, the methods for disconnecting the camera are similar. 1 Verify that the status lamp is not blinking. • The status lamp blinks when transferring files. Wait until it stops. 2 Click on the tool bar at the bottom right of your computer screen. 3 Click the pop-up message. 4 Click the message box that indicates the camera can be removed safely. 5 Remove the USB cable. The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera. 5 Turn on the camera. • The computer recognizes the camera automatically. If you set the USB option to Select Mode, select Computer in the pop-up window. 6 On your computer, select My Computer “ Removable Disk “ DCIM “100PHOTO. 7 Drag or save files to your computer. Playback/Editing 97 Transferring files to your Mac computer When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 2 Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon. If you set the USB option to Select Mode, select Computer in the pop-up window. 3 Double-click the removable disk icon. 4 Drag or save files to your computer. 1 Connect your camera to a Macintosh computer with the USB cable. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Playback/Editing 98 Printing photos with a PictBridge photo printer Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. Configuring print settings Press [] to configure print settings. Images Size Layout Type Quality Date Print ExitSelect OptionDescription Images Select whether to print the current photo or all photos. Size Set the print size. Layout Set the number of photos to be printed on a single sheet of paper. Type Set the type of paper. Quality Set the print quality. Date Print Set to print the date. File Name Set to print the file name. Reset Reset settings to their default values. Some options may not be supported by some printers. 1 Rotate the mode dial to . 2 Select Connectivity → USB → Printer. 3 Turn on the printer, and then connect your camera to the printer with the USB cable. 4 If the camera is off, press [POWER] or [] to turn it on. • The printer recognizes the camera automatically. 5 Press [/] to select a file to print. • Press [] to set printing options. See “Configuring print settings.” 6 Press [] to print. • Printing starts. Press [] to cancel printing. Connecting to a WLAN and configuring network settings .............................. 100 Connecting to a WLAN ..................... 100 Using the login browser ..................... 101 Network connection tips .................. 102 Entering text ................................. 103 Using photo or video sharing websites ....................................... 104 Accessing a website ........................ 104 Uploading photos or videos ............... 104 Sending photos or videos via email ...... 106 Changing email settings .................. 106 Sending photos or videos via email ...... 107 Sending photos or videos to a smart phone .................................... 109 Using a smart phone as a remote shutter release ................................. 110 Uploading photos to a cloud server ...... 112 Using Auto Backup to send photos or videos ....................................... 113 Installing the program for Auto Backup on your PC ................................. 113 Sending photos or videos to a PC ...... 113 Viewing photos or videos on a TV Link-enabled TV ........................... 115 Sending photos using Wi-Fi Direct ...... 117 About the Wake on LAN (WOL) feature .......................................... 118 Wireless network Learn how to connect to wireless local area networks (WLANs) and use functions. Wireless network 100 Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. IconDescription Ad hoc AP Secured AP WPS AP Signal strength Press [] to open AP setting options • When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 103) • When a login page appears, refer to "Using the login browser". (p. 101) • When you select an unsecured AP, the camera will connec…

Text truncated - open the document above for the full version.

To Whom It May Concern: We, SAMSUNG ELECTRONICS CO., LTD., located at 129, Samsung­ro, Yeongtong­gu, Suwon­si, Gyeonggi­do, 443­742 Korea, Republic of Korea as manufacturer of the product mode l WB30F and WB31F, WB32F declare that all of the models WB30F, WB31F and WB32F are exa ctly same in H/W and S/W. The only difference is the model name and it is named differently for marketing purpose. Best Regards An Jae-il / Manager Samsung Electronics Co., Ltd.

Date: January 03, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Lab Manager Charles. Kim (or Feel. Jeong) and of SGS Korea Co., Ltd and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Charles. Kim (or Feel. Jeong) of SGS Korea Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

Date: Jan 3, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LWB30F To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST 1 Block Diagram 2 Operational Descriptions Permanent 3 Schematics 4 External Photos 5 Internal Photos 6 Test-Setup Photos Short-Term 7 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

External photos of EUT Front view of EUT Rear view of EUT Top view of EUT Bottom view of EUT Side view of EUT

FCC/IC Label 1. (1) FCC Label Drawing (2)FCC Label Location 2. (1)IC Label Drawing (Basic Model: WB30F) (2)IC Label Location 3. (1)IC Label Drawing (Alt.Model: WB31F) (2)IC Label Location 4. (1)IC Label Drawing (Alt. Model: WB32F) (2)IC Label Location

Model :WB30F Internal photos of EUT Model :WB30F Internal view of EUT Model :WB30F Top view of Main PCB Bottom view of Main PCB Model :WB30F Top view of Power PCB Bottom view of Power PCB Model :WB30F Top view of Lens PCB Bottom view of Lens PCB Model :WB30F Top view of Antenna Antenna

Report File No. : F690501/RF-SAR002022-A1 Date of Issue :2013-01-17 Page :1 / 55 SGS Korea Co.,Ltd.(Gunpo Laboratory)#18-34,Sanbon-dong,Gunpo-si,Gyeonggi-do,453-040KOREAt+82314285700f+82314272370 www.kr.sgs.com/ee MemberofSGSGroup(SociétéGénéraledeSurveillance) SAR TEST REPORT Equipment Under Test:Digital Camera Model No.:WB30F Applicant:Samsung Electronics Co., Ltd. Address of Applicant:129, Samsung-ro, Yeongtong-gu, Suwon-city, Gyeonggi-do, Korea FCC ID:A3L-WB30F IC ID649E-WB30F Device Category:Portable Device Exposure Category:General Population /Uncontrolled Exposure Date of Receipt:2012-11-29 Date of Test(s):2013-01-12 Date of Issue:2013-01-17 Standards:FCC OET Bulletin 65 supplement C RSS-102 (Issue 4) IEEE 1528, 2003 ANSI/IEEE C95.1, C95.3 In the configuration tested, the EUT complied with the standards specified above. Remarks: Tested by :Jongwon Ma2013-01-17 Approved by:Feel Jeong2013-01-17 This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Testing Korea Co., Ltd. or testing done by SGS Testing Korea Co., Ltd. in connection with distribution or use of the product described in this report must be approved by SGS Testing Korea Co., Ltd. in writing. Report File No. : F690501/RF-SAR002022-A1 Date of Issue :2013-01-17 Page :2 / 55 SGS Korea Co.,Ltd.(Gunpo Laboratory)#18-34,Sanbon-dong,Gunpo-si,Gyeonggi-do,453-040KOREAt+82314285700f+82314272370 www.kr.sgs.com/ee MemberofSGSGroup(SociétéGénéraledeSurveillance) Contents 1. General Information 1.1 Testing Laboratory........................................................................................... 3 1.2 Details of Applicant.......................................................................................... 3 1.3 Version of Report............................................................................................. 3 1.4 Description of EUT(s)....................................................................................... 3 1.5 Test Environment............................................................................................. 4 1.6 Operation description........................................................................................ 4 1.7 Evaluation procedures....................................................................................... 4 1.8 The SAR Measurement System............................................................................ 6 1.9 System Components.......................................................................................... 8 1.10 SAR System Verification.................................................................................... 9 1.11 Tissue Simulant Fluid for the Frequency Band.......................................................... 11 1.12 Test Standards and Limits................................................................................... 12 1.13 Justification for Extended SAR Dipole Calibrations................................................... 13 2 Instruments List................................................................................. 14 3 Summary of Results ........................................................................... 15 3.1 FCC Power Measurement Procedures..................................................................... 15 3.2 RF Conducted Power....................................................................................... 15 3.3 SAR Test Configuration ................................................................................... 17 APPENDIX A. DASY4 SAR Report B. Uncertainty Analysis C. Calibration certificate Report File No. : F690501/RF-SAR002022-A1 Date of Issue :2013-01-17 Page :3 / 55 SGS Korea Co.,Ltd.(Gunpo Laboratory)#18-34,Sanbon-dong,Gunpo-si,Gyeonggi-do,453-040KOREAt+82314285700f+82314272370 www.kr.sgs.com/ee MemberofSGSGroup(SociétéGénéraledeSurveillance) 1. General Information 1.1Testing Laboratory SGS Korea Co., Ltd. Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 Telephone: +82 +31 428 5700 FAX: +82 +31 427 2371 Homepage:All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms- and-Conditions.aspx 1.2 Details of Applicant Manufacturer: Samsung Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu, Suwon-city, Gyeonggi-do, Korea Contact Person: Mungho- Kim Phone No.: +82 +31 277 6800 E-mail: [email protected] 1.3 Version of Report Version NumberDateRevision 002013-01-17Initial issue 1.4 Description of EUT(s) EUT Type : Digital Camera Model : WB30F Serial Number : WB30FDV2-056 H/W Version : DV 2012.11.10 S/W Version : 1211211 Mode of Operation : WLAN Body worn Accessory : None Tx Frequency Range : 2412㎒~ 2462㎒(WLAN) Max. Conducted RF Power : 15.99㏈m (WLAN) Battery Type : DC 3.7 V (Li-ion Battery) Equipment ClassBand & Mode Measured Conducted Power [㏈m] Reported SAR 1g Body-Worn (W/kg) DTS WLAN15.990.333 Report File No. : F690501/RF-SAR002022-A1 Date of Issue :2013-01-17 Page :4 / 55 SGS Korea Co.,Ltd.(Gunpo Laboratory)#18-34,Sanbon-dong,Gunpo-si,Gyeonggi-do,453-040KOREAt+82314285700f+82314272370 www.kr.sgs.com/ee MemberofSGSGroup(SociétéGénéraledeSurveillance) 1.5 Nominal and Maximum Output Power Specifications This device operates using the following maximum and nominal output power specifications. SAR values were scaled to the maximum allowed power to determine compliance per KDB Publication 44798 D01v05. Average power for Production…

Text truncated - open the document above for the full version.

Report Number:F690501/RF-RTL006099Page:2of61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea INDEX Table of contents 1. General information --------------------------------------------------------------------------------------3 2. Transmitter radiated spurious emissions and conducted spurious emission --------------6 3. 6㏈bandwidth & 99% Occupied Bandwidth-----------------------------------------------------34 4. Maximum peak output power --------------------------------------------------------------------------46 5. Power Spectral Density ---------------------------------------------------------------------------------49 6. Transmitter AC Power Line Conducted Emission-------------------------------------------------56 7. Antenna Requirement -----------------------------------------------------------------------------------61 Report Number:F690501/RF-RTL006099Page:3of61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) -Wireless Div. 3FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 428 5700 FAX:+82 31 427 2371 1.2. Details of Applicant Applicant:SAMSUNG ELECTRONICS CO., LTD. Address:129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-742 Korea, Republic of Contact Person:Kim, Myeong-ho Phone No.:+82 31 277 6800 1.3. Details of Factory Information Applicant: TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD. Address: No.9 ZhangHeng Street, Micro-Electronic Industrial Park, JinGang Road, Tianjin, China 1.4. Description of EUT Kind of Product Digital Camera Model Name WB30F (Alt.: WB31F, WB32F) Serial Number N/A Power Supply DC 3.7 V Frequency Range 2 412㎒~ 2 462㎒(11b/g/n_HT20) Modulation Technique DSSS, OFDM Number of Channels 11 channels (11b/g/n_HT20) Antenna Type Internal type (SISO) Antenna Gain 2 412㎒~ 2 462㎒: -2.3㏈i Report Number:F690501/RF-RTL006099Page:4of61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1.5. Test Equipment List EquipmentManufacturerModelS/NCal Date Cal Interval Cal Due. Signal GeneratorR&S SMR40100272 Aug. 23, 2012AnnualAug. 23, 2013 Spectrum AnalyzerAgilentN9030AUS51350132Oct. 30, 2012AnnualOct. 30, 2013 AttenuatorAEROFLEX / INMET 18N – 20dB2 Apr. 02, 2012 Annual Apr. 02, 2013 High Pass FilterWainwrightWHK3.0/18G-10SS344 Jul. 12, 2012AnnualJul. 12, 2013 High Pass FilterWainwrightWHK7.5//26.5G-6SSN/A Jul. 12, 2012AnnualJul. 12, 2013 Low Pass FilterMini-Circuits NLP-1200+ V8979400903-1Jul. 12, 2012 Annual Jul. 12, 2013 Power SensorR&S NRP-Z81100669 Apr. 03, 2012 Annual Apr. 03, 2013 DC power SupplyAgilentU8002AMY49030063Jan. 03, 2012 Annual Jan. 03, 2013 PreamplifierHP8447F2944A03909Jul. 03, 2012AnnualJul. 03, 2013 PreamplifierR&SSCU 1810117Jan. 02, 2012 Annual Jan. 02, 2013 PreamplifierMITEQ Inc.JS44-18004000-35-8P1546891Jul. 12, 2012 Annual Jul, 12, 2013 Test ReceiverR&SESU26100109Feb. 21, 2012 Annual Feb. 21, 2013 Bilog AntennaSCHWARZBECKVULB9163396May 12, 2011BiennialMay 12, 2013 Horn AntennaSCHWARZBECKBBHA9170 BBHA9170431May 15, 2012BiennialMay 15, 2014 Horn AntennaR&SHF 906 100326Nov. 23, 2011BiennialNov. 23, 2013 Antenna MasterINN-COMM4000 N/AN/AN/AN.C.R. Turn TableINN-CODS 1200 S N/AN/AN/AN.C.R. Test ReceiverR&S ESHS10863365/018Jun. 04, 2012AnnualJun. 04, 2013 Two-Line V-NetworkR&S ENV216100190Jan. 09, 2012 Annual Jan. 09, 2013 Anechoic ChamberSY Corporation L × W × H (6.5 m × 3.5 m × 3.5 m) N/AN/A N/A N.C.R. Anechoic ChamberSY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/AN/AN/AN.C.R. ▶Support equipment DescriptionManufacturerModelSerial Number N/A--- Report Number:F690501/RF-RTL006099Page:5of61 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part15 Subpart C § 15.247, RSS-210 Issue8, RSS-Gen Issue3 Standard sectionTest Item(s)Result 15.205 15.209 15.247(d) RSS-210 A8.5 Transmitter Radiated Spurious Emissions Conducted Spurious Emission Complied 15.247(a)(2) RSS-210 A8.2(a) RSS-Gen 4.6.1 6㏈Bandwidth and 99% Occupied Bandwidth Complied 15.247(b)(3)RSS-210 A8.4(4)Maximum Peak Output PowerComplied 15.247(e)RSS-210 A8.3(2)Power Spectral DensityComplied 15.207RSS-Gen 7.2.4 Transmitter AC Power Line Conducted Emission Complied 1.7. Test Procedure(s) The measurement procedures described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9㎑to 40㎓ (ANSI C63.4-2003) and the guidance provided in KDB 558074 were used in the measurement of the D…

Text truncated - open the document above for the full version.

Test setup photos of EUT A. Photo of Field Strength & Spurious Emission Test B. Photos of conducted power line test

Test Setup Photographs Front Rear Right Edge Left Edge Top Bottom EUT Photo Front Back Right Edge Left Edge Top Bottom Battery