A3LWB35FDigital Camera

QUICK START GUIDE SPA Guía de Inicio Rápido FOR TECHNICAL SUPPORT, PLEASE CALL 1-800-SAMSUNG (726-7864) POR FAVOR LLAMAR 1-800-SAMSUNG (726-7864) PARA ASISTENCIA TECNICA WB35F/WB36F/WB37F -22 S PA Para conocer más detalles, consulte el manual del usuario (en formato PDF) en el sitio Web. For more details, refer to the User Manual (PDF) on the website. -33 1. Unpacking S PA Desembalaje Optional accessories S PA Accesorios opcionales AD39-00190A/AD44-00179AAD43-00194AAD81-10346A Black (Negro): AD63-07111A/ Silver (Plateado): AD63-07112A/ White (Blanco): AD63-07284A AD39-00191AAD69-04026AAD44-00176A 44 S PA Insertar y quitar la batería y la tarjeta de memoria 2. Inserting and removing the battery and memory card 55 3. Charging the battery S PA Cargar la batería 6 6 S PA Realización de la configuración inicial 4. Performing the initial setup 77 5. Capturing and viewing a photo S PA Cómo capturar y ver una foto 8 8 6. Recording and viewing a video S PA Cómo grabar y ver un video 9 9 S PA Transferir archivos al ordenador 7. Transferring files to your computer 10 Install i-Launcher? NoYes 3 4 4 10 11 Install i-Launcher? NoYes 3 4 4 ENG Learn to connect to wireless local area networks (WLANs) and use functions. S PA Aprenda a conectarse a redes de área local inalámbricas (WLAN) y utilizar las funciones. English . . . . . . . . .12 Español . . . . . . . .22 EN-12 English EN Using the DIRECT LINK button You can turn on the Wi-Fi feature conveniently with []. Setting a DIRECT LINK button option 1 On the Home screen, scroll to <Basic>. 2 Select → General → DIRECT LINK (Wi-Fi Button). 3 Select an option. Using the NFC feature (Tag & Go) 1 Place the smart phone’s NFC antenna near the camera’s NFC tag for more than 2 seconds. 2 Transfer files or launch a Wi-Fi function depending on the current mode. • Wi-Fi mode: MobileLink, Remote Viewfinder • Playback mode: Transfer a file immediately. (Photo Beam), MobileLink • Shooting mode: AutoShare, Remote Viewfinder - To set a Wi-Fi function to launch in Shooting mode, scroll to <Basic> on the Home screen, and then select → General → Live view NFC → a Wi-Fi function. Do not modify the tag information in any way. Connecting to a WLAN 1 On the Home screen, scroll to <Wi-Fi>. 2 Select , , or . 3 Follow the on-screen instructions until the Wi-Fi Setting screen appears. • The camera automatically searches for available AP devices. • In some modes, press [ ], and then select Wi-Fi Setting. 4 Select an AP. • When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. • If you select a WPS profile supported AP, select → WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting → WPS button connection on the camera, and then pushing the WPS button on the AP device. EN-13 English Network connection tips • Some Wi-Fi features are not available if you do not insert a memory card. • The quality of the network connection will be determined by the AP. • The further the distance between your camera and the AP, the longer it will take to connect to the network. • If a nearby device is using the same radio frequency signal as your camera, it may interrupt your connection. • If your AP name is not in English, the camera may not be able to locate the device or the name may appear incorrectly. • For network settings or a password, contact your network administrator or network service provider. • If a WLAN requires authentication from the service provider, you may not be able to connect to it. To connect the WLAN, contact your network service provider. • Depending on the encryption type, the number of digits in the password may differ. • A WLAN connection may not be possible in all surroundings. • The camera may display a WLAN enabled printer on the AP List. You cannot connect to a network via a printer. • You cannot connect your camera to a network and a TV simultaneously. • Connecting to a network may incur additional charges. Costs will vary based on the conditions of your contract. • If you cannot connect to a WLAN, try another AP from the available AP list. • A login page may appear when you select free WLANs provided by some network service providers. Enter your ID and password to connect to the WLAN. For information about registering or the service, contact the network service providers. • Be cautious when you enter personal information for an AP connection. Do not enter any payment or credit card information on your camera. The manufacturer is not liable for any problem caused by entering such information. • Available network connections may differ by country. • The WLAN feature of your camera must comply with radio transmission laws in your region. To ensure compliance, use the WLAN feature only in the country where you purchased the camera. • The process for adjusting network settings may differ, depending on network conditions. • Do not access a network that you are not authorized to use. • Before you connect to a network, ensure your battery is fully charged. • You cannot upload or send files captured in some modes. • Files that you transfer to another device may not be supported by the device. In this case, use a computer to playback the files. EN-14 4 On the smart phone, turn on Samsung SMART CAMERA App. • For iOS devices, turn on the Wi-Fi feature before turning on the application. 5 On the smart phone, select the camera from the list and connect the smart phone to the camera. • The smart phone can connect to only one camera at a time. 6 On the camera, allow the smart phone to connect to your camera. • If the smart phone has been connected to your camera before, it is connected automatically. 7 On the smart phone or camera, select files to transfer from the camera. 8 Touch the copy button on the smart phone or select Send on the camera and send files. Sending photos or videos to a smart phone You can easily send photos or videos to your smart phone that sup…

Text truncated - open the document above for the full version.

(Company letterhead) XXXX (Address) TEL: XXX FAX: XXXX Declaration for no non-US channel operation December 31, 2013 We, Samsung Electronics Co.,Ltd declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: A3LWB35F If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Name: Sang Kyung(peter) Ra / General Manager Tel: +1-973-808-6362 Fax: 973-808-6361 E-mail: [email protected]

LETTER HEAD (Company letterhead) XXXX (Address) TEL: XXX FAX: XXXX Date: 2013-12 -31 FCC ID: A3LWB35F To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Sang Kyung(peter) Ra / General Manager Samsung Electronics Co.,Ltd. Tel: +1 -973-808-6362 Fax: 973-808-6361 E-mail: [email protected]

LETTER HEAD (Company letterhead) XXXX (Address) TEL: XXX FAX: XXXX Date: 2013-12-31 FCC ID: A3LWB35F AUTHORIZATION LETTER To whom it may concern: We, the undersigned Samsung Electronics Co.,Ltd. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Sang Kyung(peter) Ra / General Manager Samsung Electronics Co.,Ltd. Tel: +1 -973-808-6362 Fax: 973-808-6361 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC ID: A3LWB35F Report No.: RF131219C09 Operational Description This device is a Digital camera, which operates in 2.4GHz band; the maximum data rate could be up to 65Mbps with OFDM technique. If the signal to noise ratio is too poor which could not support 65Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 3.7Vdc from battery or 5Vdc from adapter or 5Vdc from host equipment. The antenna is Monopole antenna without antenna connectors.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 21 Report No. : SA131205C01A, Reference No.: 131219C09 Issued Date : Jan. 22, 2014 Revision : R01 FCC SAR Test Report Report No. : SA131205C01A Applicant : Samsung Electronics Co.,Ltd Address : 19 Chapin Rd. Building D Pine Brook NJ 07058 Product : Digital camera FCC ID : A3LWB35F Brand : SAMSUNG Model No. : SAMSUNG WB35F, SAMSUNG WB36F, SAMSUNG WB37F (Refer to item 2 for more details) Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r02 KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 Sample Received Date : Dec. 05, 2013 Date of Testing : Jan. 16, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 21 Report No. : SA131205C01A, Reference No.: 131219C09 Issued Date : Jan. 22, 2014 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 14 3.4.4 Spatial Peak SAR Evaluation ..................................................................…

Text truncated - open the document above for the full version.

Report No.: RF131205C01A 1 of 50 Report Format Version 5.2.0 Reference No.: 131213C30, 131219C09 FCC TEST REPORT REPORT NO.: RF131205C01A MODEL NO.: SAMSUNG WB35F, SAMSUNG WB36F, SAMSUNG WB37F (Refer to item 3.1 for more details) FCC ID: A3LWB35F RECEIVED: Dec. 05, 2013 TESTED: Dec. 23, 2013 ~ Jan. 02, 2014 ISSUED: Jan. 09, 2014 APPLICANT: SAMSUNG ELECTRONICS CO., LTD. ADDRESS: 19 Chapin Rd. Building D Pine Brook NJ 07058 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131205C01A 2 of 50 Report Format Version 5.2.0 Reference No.: 131213C30, 131219C09 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 17 4.1.7 TEST RESULTS .......................................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 29 4.2.2 TEST INSTRUMENTS ................................................................................................................. 29 4.2.3 TEST PROCEDURES ................................................................................................................. 30 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 30 4.2.5 TEST SETUP ............................................................................................................................... 30 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 30 4.2.7 TEST RESULTS .......................................................................................................................... 31 4.3 6dB BANDWIDTH MEASUREMENT .......…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Jan. 22, 2014 Report No. : SA131205C01A, Reference No.: 131219C09 Revision : R01 Appendix D. Photographs of EUT and Setup FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA131205C01A, Reference No.: 131219C09 Revision : R01 <Photographs of EUT> FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA131205C01A, Reference No.: 131219C09 Revision : R01 <Antenna Location> The separation distance for antenna to edge: Antenna To Front Face (mm) To Rear Face (mm) To Top Side (mm) To Bottom Side (mm) To Left Side (mm) To Right Side (mm) WLAN 11.25 10.75 1.85 59.25 68.77 16.6 Bottom Side Left Side Top Side Right Side WLAN Antenna FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA131205C01A, Reference No.: 131219C09 Revision : R01 <Photographs of SAR Setup> Top Side of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Front Face of EUT with 0 cm Gap Rear Face of EUT with 0 cm Gap

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (TEST MODE A) 3 RADIATED EMISSION TEST (TEST MODE B)