A4S-6W41PQI Air Pen

Power Quotient International Co., Ltd PQI Air Pen A400 Getting Started Step 1: Charge your “PQI Air” Pen Please fully charge your “PQI Air” Pen before the first use. Connect the USB port to a PC or USB power adapter to charge your device. The orange LED indicator will turn off when charging has completed. The red LED indicator is lit when battery level drops below 20%. Please recharge as soon as possible. Step 2: Prepare your content for “PQI Air” Pen Insert the Micro SDHC card into the slot of “PQI Air” Pen (Supports only Micro SDHC 4 to 32 GB). Connect the “PQI Air” Pen to the PC using the USB plug. “PQI Air” Pen will appear as a removable disk drive, and simply copy the files from your PC to “PQI Air” Pen. Step 3: Download the free “PQI Air Pen +” App from Apple App Store (iOS Device) or Google Play (Android Device). Step 4: Power on your “PQI Air” Pen Press the round P logo power button for two seconds. First the blue LED indicator will light up and then the side blue Wi‐Fi LED indicator will begin flashing. Then, move onto the next step. Step 5: On your mobile device, choose "Wi‐Fi Settings" from the "Settings" menu. Then, choose “PQI Air” Pen to enable the connection. Step 6: Once connected, launch the “PQI Air Pen +” application on your mobile device and start to browse the digital content from “PQI Air” Pen. Note: Repeat steps 3~6 to share your “PQI Air” Pen with up to 5 different devices. Step 7: Your “PQI Air” Pen becomes a wireless access point when plugging in an Ethernet cable. Preferences: The following settings are available in the “PQI Air Pen +” "Settings" menu. ‐"Wi‐Fi SSID": Change the name of your “PQI Air” Pen. (It is recommended that you change your own SSID) ‐"Password/Change Password": Enable password and setup a password to protect data from being accessed by unauthorized connections. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1‐1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator & your body.

Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 1 OF 2 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Photographs of EUT Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 2 OF 2 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255

4.6 mm 3.8 mm 20121116 Yafeng Chen LR1 備 註 1.5 20.8 28.1 7.5 字體：Arial 字高：1.5mm 字間距：1.0mm 雷射雕刻 8.6 2.0 2.0 2.0

Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 1 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Photographs of EUT Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 2 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 3 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 4 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 5 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 6 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255 Report No.:EP292902 SPORTON International Inc. PAGE NUMBER : 7 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 26, 2012 FAX : 886-2-2696-2255

Page No. : 1 Power Quotient International Co., Ltd 8F., No49., Sec.4, Jhongyang Rd., Tu Cheng Dist., New Taipei City 23675, Taiwan Tel: 886-2-22699888 / Fax: 886-2-2269-9858 Tune Up Procedure Date: 2012/11/26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oaklamd Mills Road Columbia, MD 21046 U.S.A. To whom it may concern, FCC ID: A4S-6W41 The output power setting of EUT is set in the factory and followed the max level in below. There is no tune up procedure except factory default setting. Target output power setting in factory: 2.4GHz Band: 802.11b : 17dBm ± 1dB 802.11g: 21dBm ± 1dB 802.11n (20MHz): 22dBm ± 1dB

SPORTON INTERNATIONAL INC. Page Number : 1 of 27 TEL : 886-3-327-3456 Report Issued Date : Dec. 11, 2012 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : A4S-6W41 FCC SAR Test Report Report No. : FA292902 FCC SAR Test Report APPLICANT : Power Quotient International Co., Ltd EQUIPMENT : PQI Air Pen BRAND NAME : pqi MODEL NAME : A400 FCC ID : A4S-6W41 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was completely tested on Oct. 30, 2012. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 27 TEL : 886-3-327-3456 Report Issued Date : Dec. 11, 2012 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : A4S-6W41 FCC SAR Test Report Report No. : FA292902 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 2.1 Testing Laboratory .................................................................................................................................................. 5 2.2 Applicant ................................................................................................................................................................ 5 2.3 Manufacturer .......................................................................................................................................................... 5 2.4 Application Details .................................................................................................................................................. 5 3. General Information ...................................................................................................................................................... 6 3.1 Description of Equipment Under Test (EUT) .......................................................................................................... 6 3.2 Product Photos....................................................................................................................................................... 6 3.3 Applied Standards .................................................................................................................................................. 7 3.4 Device Category and SAR Limits ........................................................................................................................... 7 3.5 Test Conditions ....................................................................................................................................................... 7 4. Specific Absorption Rate (SAR) ................................................................................................................................... 8 4.1 Introduction ............................................................................................................................................................ 8 4.2 SAR Definition ........................................................................................................................................................ 8 5. SAR Measurement System ........................................................................................................................................... 9 5.1 E-Field Probe ........................................................................................................................................................10 5.2 Data Acquisition Electronics (DAE) ....................................................................................................................... 11 5.3 Robot .................................................................................................................................................................... 11 5.4 Measurement Server ............................................................................................................................................. 11 5.5 Phantom ................................................................................................................................................................12 5.6 Device Holder........................................................................................................................................................13 5.7 Data Storage and Evaluation ................................................................................................................................14 5.8 Test Equipment List ...............................................................................................................................................16 6. Tissue Simulating Liquids ...........................................................................................................................................17 7. SAR Measurement Evaluation ....................................................................................................................................18 7.1 Purpose of System Performance check ................................................................................................................18 7.2 System Setup ....................................................................................…

Text truncated - open the document above for the full version.

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company Power Quotient International Co., Ltd Applicant Address 8F., No49., Sec.4, Jhongyang Rd., Tu Cheng Dist., New Taipei City 23675, Taiwan FCC ID A4S-6W41 Manufacturer’s company Fugang Electric (Kunshan) Co., Ltd. Manufacturer Address No.6, Zheng Wei Road, Jin Xi Town, Kun Shan City, Jiang Su Province, China Product Name PQI Air Pen Brand Name pqi Model Name A400 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Sep. 29, 2012 Final Test Date Oct. 29, 2012 Submission Type Original Equipment Statement Test result included in this report is for the IEEE 802.11n and IEEE 802.11b/g part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009, 47 CFR FCC Part 15 Subpart C, KDB 558074 D01 v02 and KDB 662911 D01 v01r02. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR292902 Report Format Version: 01 Page No. : iof ii FCC ID: A4S-6W41 Issued Date : Nov. 26, 2012 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................5 3.3. Table for Filed Antenna.......................................................................................................................................................................5 3.4. Table for Carrier Frequencies .............................................................................................................................................................6 3.5. Table for Test Modes ...........................................................................................................................................................................6 3.6. Table for Testing Locations..................................................................................................................................................................7 3.7. Table for Supporting Units ...................................................................................................................................................................7 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................7 3.9. Test Configurations .............................................................................................................................................................................8 4. TEST RESULT ..................................................................................................................................................... 9 4.1. AC Power Line Conducted Emissions Measurement...........................................................................................................................9 4.2. Peak Output Power Measurement ....................................................................................................................................................13 4.3. Average Output Power Measurement ..............................................................................................................................................16 4.4. Power Spectral Density Measurement ..............................................................................................................................................19 4.5. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................29 4.6. Radiated Emissions Measurement ....................................................................................................................................................37 4.7. Band Edge Emissions Measurement .................................................................................................................................................52 4.8. Antenna Requirements .....................................................................................................................................................................62 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 63 6. TEST LOCATION.............................................................................................................................................. 65 7. TAF CERTIFICATE OF ACCREDITATION ............................................................................................................. 66 APPENDIX A. TEST PHOTOS .................................................................................................…

Text truncated - open the document above for the full version.

Report No.: FR292902 FCC ID: A4S-6W41 Page No. : A1 of A5 Appendix A. Test Photos Report No.: FR292902 FCC ID: A4S-6W41 Page No. : A2 of A5 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR292902 FCC ID: A4S-6W41 Page No. : A3 of A5 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR292902 FCC ID: A4S-6W41 Page No. : A4 of A5 Test Configuration: 30MHz~1GHz FRONT VIEW REAR VIEW Report No.: FR292902 FCC ID: A4S-6W41 Page No. : A5 of A5 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW