A4X-IPC-14NSBattery Camera

In the Box02 04 06 07 11 17 Product Overview Set Up Your Camera Mount Your Camera Basic Parameters Customer Service 16 Notice Content 1 Aer opening the box, please check the following picture to see if the accessories are complete. Camera Mounting Bracket In the Box USB Cable (Optional) (Optional) USB Adapter Quick Start Guide Mounting Screw Pack 2 Introduction 1. Battery Powered and RTOS System With a built-in PIR module and RTOS system the battery camera can work for 3 months if it had been triggered 20 times per day aer a full charging. 2. Completely Wireless: It doesn't need any cable for line power or network. 3. Excellent Clarity: 2.5K(2560*1440) Ultra HD Resolution. 4. Color Night Vision: The hardware has the built-in IR LEDs and spotlights that allow you to capture a color image even at night. 5. Storage: Support local storage and cloud storage. 3 Appearance Status LED Product Overview 1 Photosensitive Sensors 2 Spotlights 3 PIR 4 Lens 5 Microphone 6 Micro SD Card Slot 7 Power Input 10 Reset Button 11 Speaker 8 Power Button 9 4 2 3 4 1 5 6 7 8 10 11 9 Status LED LED Status Slow blinking Red Fast blinking Red Slow blinking Blue Solid Blue Flashing blue and red alternately The camera has been added successfully and working normally A firmware update is in progress Connected to the router successfully Disconnected from the internet Ready to connect Description 5 Basic Parameters 2560*1440 120° 8m 5m 8m(100°) IP66 Only 2.4GHz Wi-Fi WPA-PSK /WPA2-PSK -20~+50°C 5200mAh 254g 87(L)*53(W)* 84(H) mm DC5V-1A, Type-C Wall Mount 6 MIC/Spearker [email protected] 4MP Charging Power Battery Capacity Item Weight Product Dimensions PIR Water ProofMounting Type Active Pixels Storage Wi-Fi Network Security Operating Temp Clarity Resolution FOV(D) Lens IR LED Spotlights Audio TF Card (Max 128G) Set Up Your Camera Download Step 1 Download the Tuya Smart or Smart Life App from the Apple AppStore or Google Play, or by scanning the QR code below. Connect it to the APP Step 2 1. Sign up an App account, go to the app homepage, tap Add Device, and select the smart camera(Wi-Fi). 7 Please follow the prompts of the App to allow relevant permissions, otherwise it will aect the addition and use of the device. 8 2. Press and hold the power button for 3s until the Status LED is Slow blinking Red or Heard "Waiting to receive the wireless configuration" Please choose a 2.4GHz Wi-Fi, the camera does not support the 5GHz Wi-Fi. 9 Reset the device If the SSID of your home Wifi have been changed, you need to reconfigure the network. Please hold the reset button for 5-6 seconds until you heard "reset successfully", then take the prompts to add the device again Hold for 3s Press for 5s 3. Please click Next, select a stable network and enter a password. The camera of the device scans the QR code generated by the mobile phone, keeps a distance of 15 to 20cm and does not move until the sound of “ Di ” is heard, and finally follows the steps on the App to complete the addition. When adding devices, please make the camera and mobile phone connect to a same Wi-Fi router. 10 Select a location The camera can be mounted on a wall or ceiling. Choose a spot where you can get the desired view. Make sure to pick a place within range of your home network. Please try streaming video before you mount your camera. We recommend hanging it 2.5m (8.2 ) above the ground and maintaining an angle of about 25 degrees from the horizontal ground. 11 Mount Your Camera 25° Camera field of view Motion Detection Zone 2.5m (8.2) To mount the Camera on the wall: Step 1 Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it. Step 2 Align the mounting plate and mark the three circles where the holes need to be drilled. 12 Wall Wall Step 3 Drill three holes above the three marked circles. Step 4 Insert three anchors into the holes and use the screws to aix the bracket over the anchors. 13 Wall Wall Wall Step 5 Rotate the knob of the mounting bracket clockwise to secure it to the base of the mounting bracket. 14 Step 6 Align the hole at the bottom of the camera with the mounting bracket, and turn the camera clockwise to fix the camera to the mounting bracket.Rotate the camera to adjust the view and check it using the live stream which you can access in the app. To mount the Camera on the ceiling: 15 Please follow the steps 1-6 to secure the camera onto the ceiling. How to remove Your Camera: Hold the main body of the camera, then rotate anticlockwise to remove the camera from the mounting bracket. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 16 Notice FCC Radiation Exposure Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an…

Text truncated - open the document above for the full version.

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: A4X-IPC-14NS To Whom It May Concern: CE LINK LIMITED certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory [Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: A4X-IPC-14NS To Whom It May Concern: CE LINK LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signatory [Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4X-IPC-14NS Applicant FRN: 0021335963 US Agent – Attestation Statement / Part 2.911(d)(7) CE LINK LIMITED certifies that, as of 2023-11-06, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: A4X-IPC-14NS. CE LINK LIMITED, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of CE LINK LIMITED for FCC ID: A4X-IPC-14NS. Designated Agent Information: Company Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: CE LINK LIMITED Designated Agent: FCC US Agent, LLC Company Representative: Changhong Chen Designated Agent Representative: Tim Payne Signature: Signature:

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14NS To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Sincerely, Signatory [Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14NS Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☐ Tune-Up Information ☒ Operational Description ☐ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☒ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ User Manual ☐ For 45 days, pursuant to Public Notice DA 04-1705. or ☐ For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-06 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14NS POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, CE LINK LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Changhong Chen, Engineer]

Reference No.: WTX23X07167458W001 Page 2 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTX23X07167458W001 Page 3 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX23X07167458W001 Page 4 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTX23X07167458W001 Page 5 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7 EUT View 8 Reference No.: WTX23X07167458W001 Page 6 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 9

Reference No.: WTX23X07167458W001 Page 1 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: A4X-IPC-14NS Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTX23X07167458W001 Page 7 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Reference No.: WTX23X07167458W001 Page 8 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 1 Solder Board-Component View 2 Reference No.: WTX23X07167458W001 Page 9 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 3 Solder Board-Component View 4 Reference No.: WTX23X07167458W001 Page 10 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 5 Solder Board-Component View 6 Reference No.: WTX23X07167458W001 Page 11 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 7 Solder Board-Component View 8 Reference No.: WTX23X07167458W001 Page 12 of 16 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 9 Antenna View WIFI Antenna

1. RF Exposure Requirements 1.1 General Information Client Information Applicant: CE LINK LIMITED Address of applicant: 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China. Manufacturer: DONGGUAN CE LINK LIMITED Address of manufacturer: 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China. Factory 1#: ANFU CE LINK LIMITED Address of factory Anfu County Industrial Zone, Ji'an city, Jiangxi Province, Factory 2#: CE LINK VIET NAM COMPANY LIMITED Address of factory Lot CNSG04&CNSG06 Van Trung Industrial Zone, Viet Yen district, Bac Giang Province, Vietnam General Description of EUT: Product Name: Battery Camera Trade Name: CE-LINK Model No.: IPC-14NS-ZT Adding Model(s): IPC-14NS-ZE, IPC-14NU-ZT, IPC-14NU-ZE, IPC-14NH-ZT, IPC-14NH-ZE Rated Voltage: Input: Type-C DC 5V Solar Rated Voltage: DC 5V Battery: 3.6V Rated Current: Input: 1A Solar Rated Current: 1A Battery Capacity: 5200mAh Power Adapter: ADS-6RA-06 05050EPCU Input: AC 100-240V, 50/60Hz, 0.3A Output: 5V⎓1.0A FCC ID: A4X-IPC-14NS Equipment Type: Mobile device Technical Characteristics of EUT: Support Standards: 802.11b, 802.11g, 802.11n Frequency Range: 2412-2462MHz for 802.11b/g/n(HT20) RF Output Power: 17.51dBm (Conducted) Type of Modulation: CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM Quantity of Channels: 11 for 802.11b/g/n(HT20) Channel Separation: 5MHz Type of Antenna: FPC Antenna Antenna Gain: 2dBi 1.2 RF Exposure Exemption According to §1.1307(b)(3) and KDB 447498 D04 Interim General RF Exposure Guidance v01, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Option A: FCC Rule Part 1.1307 (b)(3)(i)(A):The available maximum time-averaged power is no more than 1mW, regardless of separation distance. Option B: FCC Rule Part 1.1307 (b)(3)(i)(B): The available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. P th is given by: Option C: FCC Rule Part 1.1307 (b)(3)(i)(C): The minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. R must be at least λ/2π, where λ is the free-space operating wavelength in meters. Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 1.34-30 3,450 R 2 /f 2 30-300 3.83 R 2 300-1,500 0.0128 R 2 f 1,500-100,000 19.2R 2 For Multiple RF sources: FCC Rule Part 1.1307(b)(3)(ii): (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). (B) In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. 1.3 Calculated Result Radio Access Technology Prediction Frequency Output Power Antenna Gain Duty Cycle Tune-Up Time-Averaged Power ERP (MHz) (dBm) (dBi) (%) (dBm) (dBm) Wi-Fi 2412 17.50 2.0 100 18.00 18.86 Frequency Option Min. Distance Max. Power Exposure Limit Ratio Result (MHz) (cm) (dBm) (mW) (mW) Pass/Fail 2412 C 20.00 17.85 60.95 768.00 0.08 Pass Note: 1. Time-Averaged Power=Output Power * Duty Cycle; ERP= Time-Averaged Power+ Antenna gain-2.15dB 2. Option A, B and C refers as clause 1.2. 3. For option B, Max (time-averaged power, effective radiated power (ERP)) converts to Max. Power. For option C, ERP converts to Max. Power; 4. For option B, P th (mW) converts to Exposure Limit (mW); For option C, ERP (W) converts to Exposure Limit (mW). 5. Ratio= Tune-Up ERP (mW)/ Exposure Limit (mW) Mode for Simultaneous Multi-band Transmission: Radio Access Technology Ratio 1 Ratio 2 Simultaneous Ratio Limit Result Pass/Fail -- -- -- -- -- -- Result: Pass

Project:WIFI Antennae - 1 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 1 - Shenzhen Lxc Electronics Technology Co ., Ltd APPROVAL SHEET For DONGGUAN CE LINK LIMITED IPC-14NS-ZT project Antenna componentst A02520005002 频率范围(Frequency range) WIFI:2400-2500（MHz） 驻波比系数(VSWR) <2.0 输入阻抗(Input Impedance) 50（Ω） 极化方式(Polarization) 垂直极化 Vertical Polarization 半功率波束（3dB）HPW 180°H-plane 120°E-plane 天线类型(Antenna type) 内置FPC天线（Built-in FPC antenna） 天线增益峰值(Antenna gain MAX (dBi) 2dBi 天线供应商（Antenna supplier） Shenzhen Lxc Electronics Technology Co ., Ltd 天线型号（Antenna Model） IPC-14NS-ZT RF by Checked by ME by Date 2023-11-10 Customer Confirm Project:WIFI Antennae - 2 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 2 - Revision History Date Revision Description of Changes 2023-11-10 RA Measured with FPC sample. 1 TECHNICAL SUMMARY ......................................................................................... 3 2 GENERAL DESCRIPTION ...................................................................................... 3 2.1 Components/Part revisions ............................................................................................................................. 3 3 MECHANICAL DESCRIPTION ................................................................................ 3 4 ELECTRICAL PERFORMANCE .............................................................................. 3 4.1 Set-up ................................................................................................................................................................ 3 4.1.1 VSWR ........................................................................................................................................................ 3 4.1.2 Gain & Radiation Patterns .......................................................................................................................... 3 5 PLOTS .................................................................................................................... 4 6 MECHANICAL DRAWING ....................................................................................... 7 7 RELIABILITY TESTS ............................................................................................... 7 7.1 Test content ...................................................................................................................................................... 7 7.2 Test results ....................................................................................................................................................... 8 8 CONCLUSION ......................................................................................................... 8 Project:WIFI Antennae - 3 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 3 - 1 Technical Summary This report summarizes the electrical results of the proposed antenna to support the WIFI program. We test the antenna with the latest version handset. And it seems to be acceptable. 2 General Description 2.1 Components/Part revisions VSWR: Voltage Standing Wave Rate. 3 Mechanical Description 4 Electrical Performance 4.1 Set-up 4.1.1 VSWR VSWR measurements (S21) were performed using an Agilent 8753D Network Analyzer and the previously described test fixture. Coaxial chokes were used to mitigate surface currents on the outside of the cabling. The testing was performed in free space. 4.1.2 Gain & Radiation Patterns The gain of the antenna was measured in the HUMAN’s anechoic chamber. Coaxial chokes on the feed cable were used to mitigate surface currents. The chamber provides less than –30 dB reflectivity from 800 MHz through 3 GHz and an 18” diameter spherical quite zone. The measurement results are calibrated using both dipole and leaky wave horn standards. Project:WIFI Antennae - 4 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 4 - 5 Plots 5.1 VSWR（S11） LOG MAG（S11） Project:WIFI Antennae - 5 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 5 - 5.2 Gain efficiency 2400-2480（MHz) Project:WIFI Antennae - 6 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 6 - Project:WIFI Antennae - 7 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 7 - 6 Mechanical drawing MD 7 Reliability tests 7.1 Test content No 试验项目 (pilot projects) 试验方法 (test mode) 判定基准 (defining principle) 1 盐水喷雾试验 （salt spray test） 把盐浓度5%的溶液喷 雾48HR（Spray the solution with salt concentration of 5% for 48H） 不能有变色，歪（变形）脱落 等的缺点 腐蚀面积不能过大 （Spray the solution with salt concentration of 5% for 48H without discoloration, deflection (deformation), falling off, etc. The corrosion area shall not be too large） 2 工作温度 （ Operational Temperature) -40°C～+65°C 3 储存温度（Storage Temperature） -50°C～+85°C 4 湿度( Humidity) 40%～95% Project:WIFI Antennae - 8 -Project: B605 Author: Zhu File Name: Pa IPC-14NS-ZT-APP-RA Date: 2023-11-10 TEST: Language: Check: Wang A English Shenzhen Lxc Electronics Technology Co ., Ltd - 8 - 7.2 Test results NO 样品数 （Number of samples） 试验期间 (During the test) 实验结果 (experimental result) 备注 (remarks) 1 50 24 hour OK 技术等级为9级 腐蚀<0.4mm(Remarks The technical level is Level 9 Corrosion<0.4mm) 2 50 48 hour OK 技术等级为9级 腐蚀<0.4mm(Remarks The technical level is Level 9 Corrosion<0.4mm) 8 Conclusion…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 52 TEST REPORT Reference No. .................... : WTX23X07167458W001 FCC ID ................................ : A4X-IPC-14NS Applicant ........................... : CE LINK LIMITED Address ............................. : 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China. Manufacturer ..................... : DONGGUAN CE LINK LIMITED Address ............................. : 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China. Product Name ................... : Battery Camera Model No... ......................... : IPC-14NS-ZT Standards .......................... : 47 CFR FCC Part 15.247, surbpart C Date of Receipt sample .... : 2023-07-31 Date of Test........................ : 2023-07-31 to 2023-09-25 Date of Issue ..................... : 2023-09-25 Test Report Form No. ....... : WTX_Part 15_247W Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Gala Wang Silin Chen Reference No.: WTX23X07167458W001 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 52 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY ...................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE .............................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. ANTENNA REQUIREMENT ................................................................................................................................. 12 3.1 STANDARD APPLICABLE ..................................................................................................................................... 12 3.2 EVALUATION INFORMATION ................................................................................................................................ 12 4. POWER SPECTRAL DENSITY ........................................................................................................................... 13 4.1 STANDARD APPLICABLE ..................................................................................................................................... 13 …

Text truncated - open the document above for the full version.