A6GC4D-4MUSV8Telematic embedded system

C4D-4MUSAA_V8 - INSTALLATION GUIDE V 1.3 18/03/2021 Table of contents Preface ...................................................................................................................................3 Warnings and notices ............................................................................................................3 FCC Regulations ........................................................................................................... 3 FCC RF Exposure Information (SAR) ............................................................................. 4 1. Hardware features .............................................................................................................5 2. Hardware description ........................................................................................................6 2.1 External view ................................................................................................................6 2.2 Internal view ................................................................................................................6 2.3 OBD connector pin out ...............................................................................................7 2.4 OBD adapter wires ......................................................................................................7 3. Preparing/installing the device ..........................................................................................8 3.1 Open the device ..........................................................................................................8 3.2 Insert the SIM card .................................................................................................... 10 3.3 Properly close the device ........................................................................................... 11 3.4 Install the OBD Dongle ............................................................................................. 13 4. LED sequences................................................................................................................. 14 5. Support ............................................................................................................................ 14 Preface The information contained in this installation guide is subject to changes in order to improve the reliability, design or features without prior notice. MUNIC Car Data reserves the right to make changes in the content without obligation to notify any person or organisation of such changes or improvements. MUNIC Car Data can in no event be held liable for technical or editorial errors or omissions herein, nor for incidental, special or consequential damages from the furnishing, performance or use of this installation guide. Please contact our technical support for current updates and supplemental information concerning the use and operation of this or other MUNIC Car Data products. Warnings and notices The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Please read the installation guidelines, as well as the safety and operating instructions before operating your device. Follow all instructions and heed all warnings in the installation guide. There is a risk of explosion if the battery is replaced by a wrong battery type. Please discard empty battery according to local regulations. Dispose of used batteries according to the instructions. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The FCC has granted an Equipment Auth…

Text truncated - open the document above for the full version.

1/3 MUNIC 100 Avenue de Stalingrad 94800 Villejuif, FRANCE Date: March 22, 2021 Product Equality Declaration We, MUNIC, declare on our sole responsibility for the product C4D-4MUSAA_V8 that we accept the component sources mentioned below, and that they were tested for FCC compliance: 1. Product Information. Model: C4D-4MUSAA_V8 HW version: HC4D-4MUSAA_V8.01 a) Ferrite accepted and tested sources: For this component at the same placement the sources listed below from different manufacturers are accepted and tested: Description Reference on schematic Approved Manufacturer SMD EMI Suppression Ferrite Beads WE-CBF L2, L3, L6, L301, L302, L304 Würth Electronik Murata b) TCXO accepted and tested sources For this component at the same placement both packaging dimension (3.2x2.5mm or 2.0x1.6mm) are accepted and tested (Sources from the different manufacturers listed below are accepted): Description Reference on schematic Approved Manufacturer TCXO 3.2x2.5mm or 2.0x1.6mm 26MHz 1.8V 2.0ppm Y3 Epson KDS Taitien ASK 2/3 c) Accelerometer alternative Source For this accelerometer feature both alternatives listed below are accepted and tested: Alternative 1 : Description Reference on schematic Reference of associated component on schematic MEMS digital output motion Reference of Associated component on schematic sensor: ultra-low- power high-performance 3-axis "femto" accelerometer U21 R130, R131, R142, C92, C93, C94 Alternative 2 : Description Reference on schematic Reference of associated component on schematic MEMS digital output motion sensor ultra-low-power high performance three-axis “nano” accelerometer U23 C98, C99, C100

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 5 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 PHOTOGRAPHS OF THE EUT BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 5 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 3 of 5 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 4 of 5 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 5 of 5 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8

Model Label for OBD V8 CAT M1 US standard MDI code Draw Yanzhe ZHAO Date 07/01/2021 Scale 3 ：1 Unite mm Specifica�on Dimension36mm * 34mm MaterialPET OthersGloss lamina�on(High gross) Colour VersionDateDescription AA Rev1.007/01/2021Initial version Editor black&white MOT00761AA Rev 1.0 Telematics embedded system Model : C4D-4MUSAA_V8 FCC ID : A6GC4D-4MUSV8 Input DC : 8 - 18V 2A max R 1.5 mm +0 -0.4 36 +/-0.2 mm 34 +/-0.2 mm Manufactured by Y.ZHAO

Model Label for OBD V8 CAT M1 US standard MDI code Draw Yanzhe ZHAO Date 21/01/2021 Scale 3 ：1 Unite mm Specifica�on Dimension36mm * 34mm MaterialPET OthersGloss lamina�on(High gross) Colour VersionDateDescription AA Rev1.021/01/2021Initial version Editor black&white MOT00763AA Rev 1.0 Telematics embedded system Model : C4D-4MUSAA_V8 FCC ID : A6GC4D-4MUSV8 Input DC : 8 - 18V 2A max R 1.5 mm +0 -0.4 36 +/-0.2 mm 34 +/-0.2 mm Manufactured by Y.ZHAO

MUNIC 100 Avenue de Stalingrad 94800 Villejuif, France

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 PHOTOGRAPHS OF THE EUT BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 3 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 LTE CAT-M1 Antenna BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 4 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 5 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 6 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 7 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 8 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 9 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 10 of 10 Report Version 1 Reference No.: A210125W001 FCC ID: A6GC4D-4MUSV8

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 29 Report No. : SA210125W001 Issued Date : Feb. 26, 2021 FCC SAR Test Report Report No. : SA210125W001 Applicant : MUNIC Address : 100 Avenue de Stalingrad 94800 Villejuif – France Manufacturer : MUNIC Address : 100 Avenue de Stalingrad 94800 Villejuif – France Product : Telematic embedded system FCC ID : A6GC4D-4MUSV8 Brand : Metromile/ MUNIC Model No. : C4D-4MUSAA_V8 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 KDB 447498 D01 v06 / KDB 941225 D05 v02r05 Sample Received Date : Jan. 25, 2021 Date of Testing : Feb. 07, 2021 ~ Feb. 19, 2021 CERTIFICATION: The above equipment have been tested by BV 7LAYERS COMMUNICATIONS TECHNOLOGY (SHENZHEN) CO. LTD., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies. Prepared By : Jerry Chen / Engineer Approved By : Luke Lu / Manager This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 29 Report No. : SA210125W001 Issued Date : Feb. 26, 2021 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ....................................................................................................................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Feb. 26, 2021 Report No. : SA210125W001 Appendix D. Photographs of EUT and Setup

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 56 Test Report No.: RFA210125W001-1 FCC TEST REPORT (PART 24) Applicant: MUNIC Address: 100 Avenue de Stalingrad 94800 Villejuif – France Manufacturer or Supplier: MUNIC Address: 100 Avenue de Stalingrad 94800 Villejuif – France Product: Telematic embedded system Brand Name: Metromile/ MUNIC Model Name: C4D-4MUSAA_V8 FCC ID: A6GC4D-4MUSV8 Date of tests: Jan. 25, 2021 ~ Mar. 01, 2021 The tests have been carried out according to the requirements of the following standard: FCC PART 24, Subpart E FCC PART 2 ANSI/TIA/EIA-603-D ANSI/TIA/EIA-603-E ANSI C63.26-2015 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Simon Wang Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Mar. 02, 2021 Date: Mar. 02, 2021 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 56 Test Report No.: RFA210125W001-1 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS ....................................................................................................... 5 1.1 MEASUREMENT UNCERTAINTY ................................................................................................. 6 1.2 TEST SITE AND INSTRUMENTS .................................................................................................. 7 2 GENERAL INFORMATION .................................................................................................................. 8 2.1 GENERAL DESCRIPTION OF EUT ............................................................................................... 8 2.2 CONFIGURATION OF SYSTEM UNDER TEST .......................................................................... 10 2.3 DESCRIPTION OF SUPPORT UNITS .......................................................................................... 11 2.4 TEST ITEM AND TEST CONFIGURATION ................................................................................... 11 2.5 EUT OPERATING CONDITIONS ............................................................................................. 13 2.6 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 13 3 TEST TYPES AND RESULTS ........................................................................................................... 14 3.1 OUTPUT POWER MEASUREMENT ........................................................................................... 14 3.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ................................................................. 14 3.1.2 TEST PROCEDURES ........................................................................................................... 14 3.1.3 TEST SETUP ...................................................................................................................... 15 3.1.4 TEST RESULTS .................................................................................................................... 15 3.2 FREQUENCY STABILITY MEASUREMENT ............................................................................... 21 3.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .................................................... 21 3.2.2 TEST PROCEDURE ............................................................................................................. 21 3.2.3 TEST SETUP ........................................................................................................................ 21 3.2.4 TEST RESULTS .................................................................................................................... 21 3.3 OCCUPIED BANDWIDTH MEASUREMENT ........................................................................... 22 3.3.1 TEST PROCEDURES ...................................................................................................... 22 3.3.2 TEST SETUP ....................................................…

Text truncated - open the document above for the full version.

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 64 Report Version 1 Test Report No.: RFA210125W001-2 FCC TEST REPORT (PART 27) Applicant: MUNIC Address: 100 Avenue de Stalingrad 94800 Villejuif – France Manufacturer or Supplier: MUNIC Address: 100 Avenue de Stalingrad 94800 Villejuif – France Product: Telematic embedded system Brand Name: Metromile/ MUNIC Model Name: C4D-4MUSAA_V8 FCC ID: A6GC4D-4MUSV8 Date of tests: Jan. 25, 2021 ~ Mar. 01, 2021 The tests have been carried out according to the requirements of the following standard: FCC Part 27, Subpart C, L ANSI/TIA/EIA-603- D FCC Part 2 ANSI/TIA/EIA-603-E ANSI C63.26-2015 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Simon Wang Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Mar. 02, 2021 Date: Mar. 02, 2021 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 64 Report Version 1 Test Report No.: RFA210125W001-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS ..................................................................................................... 5 1.1 MEASUREMENT UNCERTAINTY ............................................................................................ 5 1.2 TEST SITE AND INSTRUMENTS ............................................................................................. 6 2 GENERAL INFORMATION .............................................................................................................. 7 2.1 GENERAL DESCRIPTION OF EUT .......................................................................................... 7 2.2 CONFIGURATION OF SYSTEM UNDER TEST ....…

Text truncated - open the document above for the full version.