A8IVOOMBOX-ONGOBluetooth Speaker

User Manual Voombox-ongo Warning Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Install in accordance with the manufacturer’s instructions. Place the speakers in a stable location so they will not fall causing damage to the speakers or cause bodily harm. Do not block the openings on the speaker cabinets, never push objects into speaker vents or slots because of fire or electric hazards, Please insure reasonable space around the speakers for proper ventilation. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Do not place near any form of open flame source, such as lighted candles, on the apparatus. Refer all servicing to qualified service personnel. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Welcome: Thank you for purchasing this Divoom® product. The Divoom Voombox-ongo is a portable rugged Bluetooth Speaker System. It wirelessly connects to any Bluetooth-enabled device, such as your Smartphone, tablet, or laptop as well as providing Water resistant and speakerphone solution. Enjoy impressive audio output from the small size Package contents 1 pc of Voombox-ongo 1 pc of USB recharging cable 1 pc of 3.5mm audio cable 1 pc of bike mount holder 1 pc of user Manual Parts: 1. ON/OFF button 2. Volume"-"/prev button 3. Multifunction button 4. Volume "+'/next button 5. USB recharging port 6. Aux- in 7. Hand grip 8. Bike mount holder How to use it? Listen to your Bluetooth-enabled music player: 1. Turn on the speaker by long pressing the on/off power, then the blue LED Indicator starts blinking quickly, enter pairing mode 2. Open the Bluetooth function in your device and searching Bluetooth devices 3. Select the Voombox-Ongo from the list of discovered Bluetooth devices and they are paired! 4. Flip the “Multifunction button” to pause your music. 5. Short press the “-”:/ “+” to adjust the volume 6. Long press the “-”:/ “+” for prev and next songs Did you know? You can switch your current connected device to another Bluetooth device by following steps Action: Long press“ multifunction button” Indicator: LED blinking blue rapidly Status: Ready to pair Take Calls / Reject Calls Press the Multifunction button to pick up an incoming call. OR Press and hold the Multifunction button for 2 seconds and release to reject an incoming call ●Listen to your non-Bluetooth-enabled audio device 1. Insert one end of 3.5mm audio connector into the “Aux- in” jack of Voombox-ongo 2. Insert the other end of audio connector into your audio device 3. Turn on you audio device and start music playing. 4. Adjust the volume in your audio device. 5. Enjoy your favorite music. How to charge it up? Standard USB rechargeable jack compatible to all PC USB ports and AC adaptors Notice: Charging ---->Solid Red LED Fully charged ---> Red LED disappear Features: 1. Rugged and weather resistant design. 2. Two speakers and passive bass radiator provides clear, full audio at any volume 2. Features latest 4.0 Bluetooth Technology, wirelessly connects to any Bluetooth-enabled device 3. Powerful built-in microphone for hands free calls 4. Built-in Li-ion battery gives you 8 hours non-stop music 5. Included bike mount holder lets you enjoy your music while riding. Specification: Dimensions: 140L x 60W x 73H mm Weight: 406g Speaker: 1.5" X 2 Output power: 7W (3.5W * 2 ) Frequency Response: 100-20000Hz Signal-to-Noise Ratio: ≥76dB Distortion: ＜1% Playback Time: up to 8 hours Battery Capacity: 1000mA Battery Voltage: 3.7V Battery Charge Time: 3-4 hours Wireless Range: Up to 10 meters Bluetooth Compliant: Bluetooth V4.0 FCC Compliance statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject of the following two condition: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Shenzhen DIVOOM Technology Co., Ltd. A3, 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District, Shenzhen, Guangdong, China FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics , block diagrams, operational description and bill of materials.) To: Federal Communications Com阿lission Equipment Authorization Branch 7435 Oakland MiIIs Road Columbia, MD 21046 Pursuant to 47 CFR Section 0 .459(a) & (b), we, Shenzhen DIVOOM Technology Co., Ltd. (the applicant I grantee) Company name Address City A3 , 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District shenzhen ,Guangdong Country China request for this certificati。nfiling under: Grantee Code I Product Number FCC ID: A81 VOOMBOX-ONGO to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description X Operational Description explaining the functioning of the block diagram X Block Diagrams showing the systematic building blocks of the EUT X Schematics Diagrams showing ç;omponents, their values and interconnection X Bill of Materials List of components used on the PCB's of the EUT Above materials crossed contain secrets , proprietary and technical information, which would customarily be guarded from competitors under 47 CFR , section 0.457(d)(2). Disclosure or publication or any po叫ionof this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0 .457(d)(1)(ii) disclosure ofthe applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. A忧estation: City and Country: Date: Name: Function: Signature: (this must be a person) (or official company stamp) Shenzhen, Guangdong, 12014-07-15 IJe悔叩Ya。 Sales Manager China 阶兔

Shenzhen DIVOOM Technology Co., Ltd. A3, 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District, Shenzhen, Guangdong, China FCC Authorization Letter Number: CF304 Version: V03 Date: 11-08-2013 We, (the approval holder) Company name Address City Country Shenzhen DIVOOM Technology Co. , Ltd. A3 , 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District Shenzhen ,Guangdong China declare that the following representative (agent): Name (person) Company name Address City Country Winkey Wang A:rA Testing Technology Service Co., Ltd. 3 IF., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao'an District, Shenzhen China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth Speaker Type or Model(s) VI'oombox-ongo Tradename or Brand(s) DIVOOM We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification , registration or filing on our behalf (as representative agent or ce同ifier). A忧.estation: City and Country: Date: Name: (this must be a person) Shenzhen, Guangdong, 12014-07-15拉伯叩Yao China Function: Signature: (or official company stamp) Sales Manager 队/。

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 1 of 2 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Photographs – External Photo ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 2 of 2 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 1 of 1 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Label and Location Label Location

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 1 of 5 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Photographs – Internal Photo ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 2 of 5 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 3 of 5 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 4 of 5 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 5 of 5 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com

FCC RF Exposure FCC ID: A8IVOOMBOX-ONGO Frequency: 2402-2480 MHz (BT30 and BT40 mode, but not simultaneously, but use same antenna) Modulation: BT30:FHSS; BT40: DSSS Mid-Channel Peak Power, Conducted, highest valud measured among modes: 0.86 dBm == 1.22 mW Peak Antenna Gain (chip antenna): G = 0 dBi Peak, Radiated = 0.86 dBm + 0 dBi = 0.86 dBm = 1.22 mW SAR Test Exclusion Thresholds specified in KDB447498 Appendix A: Evaluation: The Calculated Radiated Peak output power is taken as worst case, and this emission level is far under the maximum allowed emission level at even the closest distance for 2.4G device specified in this table. Conclusion: The emitted power appears to be below the required limit, so PASS.

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709002F Page: 1 of 33 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com FCC Test Report (BLE) FCC ID : A8IVOOMBOX-ONGO Applicant : Shenzhen DIVOOM Technology Co., Ltd. A3, 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District, Guangdong, China Sample Description Product Name : Bluetooth Speaker Model No. : Voombox-ongo Serial No. : N/A Trademark : DIVOOM Receipt Date : 2014-07-09 Test Date : 2014-07-09 to 2014-07-29 Issue Date : 2014-07-29 Test Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Conclusions : PASSED* *In the configuration tested, the EUT complied with the standards specified above. Test/Witness Engineer : Approved & Authorized : This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. ATA Testing Technology Service Co., Ltd. Report No.: ATA140709002F Page: 2 of 33 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Contents CONTENTS...................................................................................................................................................................2 1. GENERAL INFORMATION...........................................................................................................................4 1.1. Client Information..............................................................................................................................4 1.2. General Description of EUT (Equipment Under Test).................................................................4 1.3. Block Diagram Showing The Configuration of System Tested..................................................5 1.4. Description of Support Units............................................................................................................5 1.5. External I/O Cable.............................................................................................................................5 1.6. Description of Test Mode.................................................................................................................6 1.7. Test Instruments List........................................................................................................................6 1.8. Laboratory Location..........................................................................................................................6 2. TEST SUMMARY............................................................................................................................................8 3. ANTENNA REQUIREMENT..........................................................................................................................9 3.1. Standard Requirement.....................................................................................................................9 3.2. Antenna Connected Construction...................................................................................................9 4. CONDUCTED EMISSION TEST................................................................................................................10 4.1. Test Standard and Limit.................................................................................................................10 4.2. Test Setup........................................................................................................................................10 4.3. Test Procedure................................................................................................................................10 4.4. Test Data..........................................................................................................................................11 5. CONDUCTED PEAK OUTPUT POWER TEST.......................................................................................14 5.1. Test Standard and Limit.................................................................................................................14 5.2. Test Setup........................................................................................................................................14 5.3. Test Procedure................................................................................................................................14 5.4. Test Data..........................................................................................................................................14 6. OCCUPY BANDWIDTH TEST....................................................................................................................16 6.1. Test Standard and Limit.................................................................................................................16 6.2. Test Setup........................................................................................................................................16 6.3. Test Procedure................................................................................................................................16 6.4. Test Data..........................................................................................................................................16 7. POWER SPECTRAL DENSITY TEST......................................................................................................19 7.1. Test Standard and Limit.................................................................................................................19 7.2. Test Setup..............................................…

Text truncated - open the document above for the full version.

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 1 of 52 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com FCC Test Report (Bluetooth) FCC ID : A8IVOOMBOX-ONGO Applicant : Shenzhen DIVOOM Technology Co., Ltd. A3, 2nd Floor, Block A, Zhengxing Building, No. 33 Taizi Road, Shekou, Nanshan District, Guangdong, China Sample Description Product Name : Bluetooth Speaker Model No. : Voombox-ongo Serial No. : N/A Trademark : DIVOOM Receipt Date : 2014-07-09 Test Date : 2014-07-09 to 2014-07-29 Issue Date : 2014-07-29 Test Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Conclusions : PASSED* *In the configuration tested, the EUT complied with the standards specified above. Test/Witness Engineer : Approved & Authorized : This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 2 of 52 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Contents CONTENTS...................................................................................................................................................................2 1. GENERAL INFORMATION...........................................................................................................................4 1.1. Client Information..............................................................................................................................4 1.2. General Description of EUT (Equipment Under Test).................................................................4 1.3. Block Diagram Showing The Configuration of System Tested..................................................5 1.4. Description of Support Units............................................................................................................6 1.5. External I/O Cable.............................................................................................................................6 1.6. Description of Test Mode.................................................................................................................6 1.7. Test Instruments List........................................................................................................................7 1.8. Laboratory Location..........................................................................................................................7 2. TEST SUMMARY............................................................................................................................................8 3. ANTENNA REQUIREMENT..........................................................................................................................9 3.1. Standard Requirement.....................................................................................................................9 3.2. Antenna Connected Construction...................................................................................................9 4. CONDUCTED EMISSION TEST................................................................................................................10 4.1. Test Standard and Limit.................................................................................................................10 4.2. Test Setup........................................................................................................................................10 4.3. Test Procedure................................................................................................................................10 4.4. Test Data..........................................................................................................................................11 5. CONDUCTED PEAK OUTPUT POWER TEST.......................................................................................14 5.1. Test Standard and Limit.................................................................................................................14 5.2. Test Setup........................................................................................................................................14 5.3. Test Procedure................................................................................................................................14 5.4. Test Data..........................................................................................................................................14 6. 20DB OCCUPY BANDWIDTH TEST........................................................................................................19 6.1. Test Standard and Limit.................................................................................................................19 6.2. Test Setup........................................................................................................................................19 6.3. Test Procedure................................................................................................................................19 6.4. Test Data..........................................................................................................................................19 7. CARRIER FREQUENCY SEPARATION TEST.......................................................................................23 7.1. Test Standard and Limit.................................................................................................................23 7.2. Test Setup........................................................…

Text truncated - open the document above for the full version.

ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 1 of 3 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Photographs – Test Setup Radiated Emission Test Setup ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 2 of 3 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com ATA Testing Technology Service Co., Ltd. Report No.: ATA140709001F Page: 3 of 3 3/F., Bldg. 5, Fusen Technology Park, Hangcheng Road, Xixiang, Bao’an District, Shenzhen, China Tel: (86)-0755-23498786 Fax: (86)-0755-29765125 www.ata-test.com Conducted Emission Test Setup