A8N-GT-200-ULSFGT-200-ULSF

P. 1P. 4 Size: 14.375”H.x8.625”+8.625”W C M Y K GT-200-ULSF NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generales uses and can radiate radio frequency energy and, if not installed and used in accordoance with the onstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follwing measures: • Reorient or relocate the recoiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation, NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT, SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. LIMITED WARRANTY STATEMENT General Terms This Limited Warranty applies to the product enclosed (”the Product”) distributed by Intellectual Solutions, Inc., doing bussiness as ”Goodtimes”, sold with this Limited Warranty Statement. This Limited Warranty is applicable in all countries. • Goodtimes warrents that the Product you have purchased from Goodtimes is free from defects in materials or workmanship under normal use during the warranty period. The warranty period starts on the date of purchase and cantinues for ninety (90) days. Your dated sales or delivery receipt, showing the date of purchase of the Product, is your prool of the purchase date. • During the warranty period, Goodtimes will repair or replace any defective parts with new parts, or, at Goodtimes’s discrelion, used part that meet or exceed performance specifications for new parts. All parts removed under this warranly become the property of Goodtimes. The replacement part takes on the warranly status of the removed part or product. • This Limited Warranty does not apply to expendable parts. This Limited Warranty does not exlend to any product from which the serial number has been removed or that has been damaged or endered defective (a) as a result of accident, misuse, abuse or other external cause; (b) by operation outside the usge parameters stated in the Instruction Sheet that shipped with the Product; (c) by the use of parts not manufactured or sold by Goodtimes; or (d) by modification or service by anyone other than Goodtimes. Limitation of Liability Goodtimes is not liable for any damages caused by the Product or the failure of the Product to perform, including any direct or indirect damahes for parsonal injury, lost profits, lost savings, incidental damages, consequential damages, or any other pecuniary loss arising out of the use or inehility to use the Product. Goodtimes is not liable for any clarim made by a third party or made by you for a third party. • This limitation applies whether damages are sought, or a claim made, under this Limited Warranty or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limited cannot be waived or amended by any person. This limitation of liability will be effective even if you have advised Goodtimes or an authorized representative of Goodtimes of the possibility of any such damages. EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, GOODTIMES MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. GOODTIMES EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW LIMITED TO THE TERMS OF THIS WORLDWIDE LIMITED WARRANTY STATEMENT. WARNING: Goodtimes™ has in the past, and will in the future, take any and all legal steps necessary in order to protect our proprietary trademarks, patents, trade dress, and capyrights. This applies to, but is not limited to, products, product design, graphics, packaging and literature. We will prosecute to the fullest extent of the law any persons or entilies who infringe upon these rights. This Class B digital apparatus complies with Canadian ICES-003. 1122 Quick Setup InstructionsQuick Setup Instructions Dist. By Goodtimes™ 41 James Way Eatontown, NJ 07724. (732) 720-2713 ©2011 Intellectual Solutions, Inc., All Rights Reserved. All designs, logos and images are the exclusive property of Intellectual Solutions, Inc. and/or its affiliates. US & FOREIGN INTELLECTUAL PROPERTY RIGHTS PENDING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Printed in China Rev. 1/6/12 1. To start fountain, place unit in water and press FTN buton twice. Submerge unit for 10-15 seconds until fountain sprays. 2. Remove from pool when not in use or while cleaning so that unit is not damaged by skimmers or other devices. 3. This product should be operated in at least 12 inches of water to get the maximum water height. It is recommended to clean out the filter screen at bottom of unit periodically to ensure proper water flow. FLOATING POOL FOUNTAIN BATTERY INS…

Text truncated - open the document above for the full version.

022311 – 6 Request for Confidentiality Date: __Jan 19, 2012______ Subject: Confidentiality Request for: _____FCC ID:A8N-GT-200-ULSF____ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent*2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Jiangsu Tianying Environmental Protection Technology Co.,Ltd_ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: ___Gang Yao______ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate

FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page 1 of 3 APPENDIX 1 PHOTOGRAPHS OF EUT FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page 2 of 3 EUT front view Back view FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page 3 of 3

FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services（ （（ （Shanghai） ）） ） Co., Ltd. Page 1 of 3 APPENDIX 2 PHOTOGRAPHS OF EUT FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services（ （（ （Shanghai） ）） ） Co., Ltd. Page 2 of 3 Internal InternalInternal Internal of Transmitter of Transmitter of Transmitter of Transmitter Open EUT Open EUTOpen EUT Open EUT Transmitter Antenna FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services（ （（ （Shanghai） ）） ） Co., Ltd. Page 3 of 3 Internal InternalInternal Internal of of of of PCB Front PCB Front PCB Front PCB Front V VV View iewiew iew Internal InternalInternal Internal of of of of PCB PCB PCB PCB B BB Back ackack ack V VV View iewiew iew

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. FCC ID: A8N-GT-200-ULSF 588 West Jindu Road,Songjiang District,Shanghai,China Telephone: +86 (0) 21 6191 5666 Fax: +86 (0) 21 6191 5655 [email protected] Report No.: SHEM111200165201 Page: 1 of 18 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only Member of the SGS Group (SGS SA) TEST REPORT Application No. : SHEM111200165201 Applicant: Jiangsu Tianying Environmental Protection Technology Co.,Ltd FCC ID: A8N-GT-200-ULSF Fundamental Frequency : 49.86 MHz Equipment Under Test (EUT): Marking: N/A Name: Light Fountain Show Model No.: GT-200-ULSF Type of EUT: Transmitter Standards: FCC PART 15 SUBPART C, Section 15.235 Date of Receipt: January 6, 2011 Date of Test: January 9, 2012 to January 21, 2012 Date of Issue: January 21, 2012 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. E&E Section Manager E&E Project Engineer SGS-CSTC(Shanghai) Co., Ltd. SGS-CSTC(Shanghai) Co., Ltd. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. FCC ID: A8N-GT-200-ULSF Report No.: SHEM111200165201 Page: 2 of 18 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary TEST ITEM FCC REFERANCE RESULT Transmitter Field Strength and Bandwidth Requirement 15.235 Pass Antenna Requirement 15.203 Compliance Noted：“-”means not require in the rules. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. FCC ID: A8N-GT-200-ULSF Report No.: SHEM111200165201 Page: 3 of 18 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY.........................................................................................................................................................2 3 CONTENTS.............................................................................................................................................................. 3 4 GENERAL INFORMATION.................................................................................................................................... 4 4.1 CLIENT INFORMATION....................................................................................................................................... 4 4.2 DETAILS OF E.U.T.................................................................…

Text truncated - open the document above for the full version.

FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. Page 1 of 2 APPENDIX 3 PHOTOGRAPHS OF EUT TEST SETUP FCC ID:A8N-GT-200-ULSF SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. Page 2 of 2 Worst-Case Radiated Emissions