AK8MDRZX330BTWIRELESS STEREO HEADSET

MDR-ZX330BT 4-563-361-11(1) MDR-ZX330BT 4-563-361-11(1) Wireless Stereo Headset Casque stéréo sans fil Auriculares estéreo inalámbricos Reference Guide US Guide de référence FR Guía de referencia ES http://www.sony.net/ ©2015 Sony Corporation Printed in China English WARNING To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Information FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate (SAR). The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. Other trademarks and trade names are those of their respective owners. Precautions On BLUETOOTH communications  BLUETOOTH wireless technology operates within a range of about 10 m (30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment.  The antenna is built into the unit as illustrated in the dotted line. The sensitivity of the BLUETOOTH communications will improve by turning the direction of the built-in antenna to the connected BLUETOOTH device. When obstacles are between the antenna of the connected device and the built-in antenna of this unit, noise or audio dropout may occur, or communications may be disabled.  BLUETOOTH communications may be disabled, or noise or audio dropout may occur under the following conditions. There is a human body between the unit and the BLUETOOTH device. This situation may be improved by placing the BLUETOOTH device facing the antenna of the unit. There is an obstacle, such as metal or wall, between the unit and the BLUETOOTH device. A device using 2.4 GHz frequency, such as a Wi-Fi device, cordless telephone, or microwave oven, is in use near this unit.  Because BLUETOOTH devices and Wi-Fi (IEEE802.11b/g/n) use the same frequency (2.4 GHz), microwave interference may occur resulting in noise or audio dropout or communications being disabled if this unit is used near a Wi-Fi device. In such a case, perform the following. Use this unit at least 10 m (30 feet) away from the Wi-Fi device. If this unit is used within 10 m (30 feet) of a Wi-Fi device, turn off the Wi-Fi device. Install this unit and the BLUETOOTH device as near to each other as possible.  Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident: where inflammable gas is present, in a hospital, or a petrol station near automatic doors or a fire alarm  Do not use the unit on an airplane. Radio waves may affect instruments, causing an accident due to malfunction.  This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using …

Text truncated - open the document above for the full version.

1-7 -1 Konan, Minato-ku, Tokyo 108-0075, Japan Tel No : +81-50-3750-7634 Fax No : N/A Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: AK8MDRZX330BT Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Parts List Operational description Block Diagram(MDR-ZX330BT).pdf Schematics(MDR-ZX330BT).pdf Part List(MDR-ZX330BT).pdf Operational Description(MDR-ZX330BT).pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Internal Photo Internal Photo(MDR-ZX330BT).pdf External Photo External Photo(MDR-ZX330BT).pdf User Manual User Manual(MDR-ZX330BT).pdf Test Setup Photo Test Setup Photo(MDR-ZX330BT).pdf Sincerely, Kazunaga Kinjo / Product Safety Manager Sony Corporation Rev 11/20/07

1- 7- 1 Konan, Minato-ku, Tokyo 108-0075, Japan Tel No : +81-50-3750-7634 Fax No : N/A DECLARATION In re : Sony Corporation FCC ID : AK8MDRZX330BT Date : 2014-11-05 USB port is not used for data exchanged to or from this device via the USB port after the device leaves the factory. It is being used for only charging the internal battery. Sincerely, Kazunaga Kinjo / Product Safety Manager Sony Corporation

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT External Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Label Photographs

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Label Photographs

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT Internal Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Antenna

AHSBTM0602-B00 VER 1.0(141104) I [LEAD FREE] MSL Level 1 Approval ApprovalApproval Approval Sheet SheetSheet Sheet 2014. 11. 04 2014. 11. 042014. 11. 04 2014. 11. 04 M MM MicroRF Co., Ltd icroRF Co., LtdicroRF Co., Ltd icroRF Co., Ltd. .. . TEL. 82-2-6406-5590 FAX. 82-70-8611-3586 Product HIGH DIELECTRIC CHIP ANTENNA Customer CRESYN Model SONY HDX-2795 Customer Code Supplier MicroRF Co., LTD. Supplier Code AHSBTM0602-B00 Customer Designed by Checked by Approved by MicroRF Designed by Checked by Approved by R&D QC R&D Hyunjoo.Park Youho.Lee Hongchul.Kim AHSBTM0602-B00 VER 1.0(141104) II [LEAD FREE] MSL Level 1 SPECIFICATION SPECIFICATIONSPECIFICATION SPECIFICATION Model : SONY HDX-2795 HIGH HIGH HIGH HIGH DIELECTRIC CHIP ANTENNA DIELECTRIC CHIP ANTENNADIELECTRIC CHIP ANTENNA DIELECTRIC CHIP ANTENNA Designed by Checked by Approved by R&D QC R&D Hyunjoo.Park Youho.Lee Hongchul.Kim 141104 141104 141104 2014. 11. 04 2014. 11. 042014. 11. 04 2014. 11. 04 MicroRF Co., Ltd MicroRF Co., LtdMicroRF Co., Ltd MicroRF Co., Ltd. .. . TEL. 82-02-6406-5590 FAX. 82-70-8611-3586 AHSBTM0602-B00 VER 1.0(141104) III Contents ContentsContents Contents 1. Revision History .............................................................................................................................. 1 2. Feature And Applications ........................................................................................................... 2 3. CODE NO. .......................................................................................................................................... 2 4. Electrical Specifications.............................................................................................................. 2 5. Mechanical Dimensions .............................................................................................................. 7 6. Measurement Method and Conditions ................................................................................. 7 7. Environmental Specifications ................................................................................................... 8 8. Environmental Tests ...................................................................................................................... 9 9. Recommended Soldering Patterns .................................................................................... 1 0 10. Packaging .................................................................................................................................... 1 1 11. Usage And Cautions .............................................................................................................. 1 1 12 .RoHS Data ................................................................................................................................... 1 2 AHSBTM0602-B00 VER 1.0(141104) １ 1. Revision History Product High Dielectric Chip Antenna Model SONY HDX-2795 CODE NO. AHSBTM0602-B00 Rev No. Date Name Page Item Revision Issue 1.0 141104 HJ.Park Issued AHSBTM0602-B00 VER 1.0(141104) ２ 2. Feature And Applications This Chip antenna is applied to 2.4 GHz ISM band applications, i.e. wireless LAN, Bluetooth, Zigbee, etc.. 3. CODE NO. CODE NO. : AHSBTM0602-B00 CUSTOMER PART NO. : 4. Electrical Specifications 4-1. * All items are measured in room temperature (25°C). * All items are measured at customer set condition. No. ITEM Specification Typical Data 1 Frequency 2402 MHz 2480 MHz 2402 MHz 2480 MHz 2 VSWR 3.0 max 5.5 max 1.5 4.0 3 Total Gain(Peak) -0.5 dBi min -2.0 min 1.169 dBi -0.052 dBi 4 Impedance 50 Ω 5 Polarization Linear AHSBTM0602-B00 VER 1.0(141104) ３ 4-2 VSWR data (S11 of SET condition) AHSBTM0602-B00 VER 1.0(141104) ４ 4-3 2D Radiation Patterns Peak Value(Beam Peak :dBi) Azimuth Plane Elevation 1 Elevation 2 2.402 GHz 1.070 1.169 1.067 2.441 GHz 1.419 0.989 1.238 2.480 GHz -0.235 -0.052 -0.586 (MicroRF (MicroRF(MicroRF (MicroRF Chamber Chamber Chamber Chamber 기준 기준기준 기준 ) )) ) (a) Azimuth Plane (XY) AHSBTM0602-B00 VER 1.0(141104) ５ (b) Elevation1 Plane (YZ) (c) Elevation2 Plane (XZ) AHSBTM0602-B00 VER 1.0(141104) ６ 4-4 3D Radiation Patterns AHSBTM0602-B00 VER 1.0(141104) ７ 5. Mechanical Dimensions 6. Measurement Method and Conditions The measurement of antenna performance is measurement of gain, radiation pattern using ORBIT/FR apparatus in Anechoic chamber and measurement of VSWR using Network analyzer. 6-1. The measurement of Frequency and VSWR NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is set up for S11 measurement. 2) The measurement frequency range is to set up from 2 GHz to 3 GHz. 3) Perform S11 one port full calibration. 4) Measure the VSWR of three points of Bluetooth frequency range such as 2402 MHz, 2441 MHz, and 2480 MHz. AHSBTM0602-B00 VER 1.0(141104) ８ 6-2. The measurement of Gain and Radiation Patterns NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is to set up in Anechoic chamber. 2) As seen the beneath, for the measurement planes as Azimuth, Elevation1, and Elevation2, measure Gain data of vertical polarization and horizontal polarization for each plane. -90° 90° 180 ° 0° 90° -90° 180° 0° -90° 90° 180° 0° (AZIMUTH PLANE) (ELEVATION1 PLANE) (ELEVATION2 PLANE) 7. Environmental Specifications No. Items Specifications 1 Material Pb-free system 2 Operating Temperature Range -30 ~ +85 °C 3 Operating Humidity Range 45 ~ 85 % RH AHSBTM0602-B00 VER 1.0(141104) ９ 8. Environmental Tests No. Item Test Conditions 1 High Temperature Storage Leave for 72±2 hours in a test bath retaining 85±2°C. After then, leave on the test conditions for 1.5 hours. 2 Low Temperature Storage Leave for 72±2 hours in a test bath retaining -30±2°C. After then, leave on the test condition for 1.5 hours. 3 Static Humidity Leave for 24±2 hours in a test bath retaining 90~95% RH / 50±3°C. After then, leave in the test condition for 1.5 hours. 4 Thermal Shock Cool from 25°C down to -30±2°C and leave for 30 …

Text truncated - open the document above for the full version.

SAR Test Exclusion Calculator Insert values in yellow highlighted boxes to determine SAR Exclusion Max Power0.642mW Min Separation5mm Frequency2.4GHz Answer0.2 KDB 628591 D01 TCB Exclusion List v16 TCBs are excluded from granting if: Controlled Use: The Answer is equal to or greater than 60 (20x threshold) KDB 447498 D01 General RF Exposure Guidance v05 4.3.1. Standalone SAR test exclusion considerations General Population: The Answer is equal to or greater than 24 (8x threshold) Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source-based time- averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface. [End quote] When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 100 MHz to 6 GHz at separation distance less than or equal to 50 mm Must be less than or equal to 3.0 for SAR Exclusion and, when published RF exposure KDB procedures are not established for SAR testing or when SAR data is not provided to support compliance.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2014-01397 Date: 2014-11-18 Page 1 of 54 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 SubpartC(Rev.2) TEST REPORT FCC Standards : FCC 47CFR part 15 subpart C Industry Canada Standards :RSS-210 Issue 8 & RSS-GEN Issue 3 Test Report No. : CTK-2014-01397 Date of Issue : 2014-11-20 FCC ID : AK8MDRZX330BT IC ID : 409B-MDRZX330BT Model/Type No. : MDR-ZX330BT Kind of Product : WIRELESS STEREO HEADSET Applicant : Sony Corporation Applicant Address : 1-7-1 Konan, Minato-ku, Tokyo 108-0075, Japan Manufacturer : Sony Corporation Manufacturer Address : 1-7-1 Konan, Minato-ku, Tokyo 108-0075, Japan Contact Person : Kazunaga Kinjo / Product safety manager Telephone : +81-50-3750-7634 Received Date : 2014-11-03 Test period : Start : 2014-11-04 End : 2014-11-18 The test results presented in this report relate only to the object tested. Tested by Reviewed by Won-Jae, Hwang Test Engineer Young-Joon, Park Technical Manager Date: 2014-11-20 Date: 2014-11-20 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2014-01397 Date: 2014-11-18 Page 2 of 54 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 SubpartC(Rev.2) REPORT REVISION HISTORY Date Revision Page No 2014-11-20 Issued (CTK-2014-01397) All This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2014-01397 Date: 2014-11-18 Page 3 of 54 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 SubpartC(Rev.2) TABLE OF CONTENTS REPORT REVISION HISTORY...........................................................................................2 1.0 General Product Description................................................................................4 1.1 Tested Frequency...............................................................................................4 1.2 Tested Mode......................................................................................................4 1.3 Device Modifications...........................................................................................5 1.4 Peripheral Devices.............................................................................................5 1.5 Calibration Details of Equipment Used for Measurement.........................................5 1.6 Test Facility.......................................................................................................5 1.7 Laboratory Accreditations and Listings..................................................................6 2.0 Summary of tests..............................................................................................7 2.1 Transmitter Requirements...................................................................................8 2.1.1 Carrier Frequency Separation........................................................................8 2.1.2 Number of Hopping Frequencies..................................................................10 2.1.4 Time of Occupancy (Dwell Time)..................................................................19 2.1.5 Maximum peak Conducted Output Power......................................................25 2.1.6 Band-edge................................................................................................30 2.1.7 Field Strength of Emissions.........................................................................41 2.1.8 AC Conducted Emissions.............................................................................51 APPENDIX A – Test Equipment Used For Tests.................................................................54 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2014-01397 Date: 2014-11-18 Page 4 of 54 This Report shall not be reproduced except in full without the written approval of CTK Form No.: CTK-RF-EF-Part15 SubpartC(Rev.2) 1.0 General Product Description Basic Model/Type No. MDR-ZX330BT Serial number Prototype EUT condition Pre-production, not damaged Antenna type Chip antenna Gain 1.99 dBi Frequency Range 2402 MHz - 2480 MHz RF power 1.676 dBm Peak Conducted (GFSK) 2.366 dBm Peak Conducted (DQPSK) Number of channels 79 Channel Spacing 1 MHz Channel Access Protocol Frequency Hopping Type of Modulation GFSK(1 Mbps), DQPSK(2 Mbps) Power Source DC 3.7 V (Lithium Ion Rechargeable Battery) 1.1 Tested Frequency LOW MID HIGH Frequency (MHz) 2402 2441 2480 1.2 Tested Mode - Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). - Following channel(s) was (were) selected for the final test as listed below. Tested Ch Modulation Technology Modulation Type Packet Type Low, Mid, High FHSS GFSK DH 5 Low, Mid, High FHSS DQPSK 2DH 5 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Report No.: CTK-2014-01397 Date: 2014-11-18 Page 5 of 54 This Report shall not be reproduced except in full without the writt…

Text truncated - open the document above for the full version.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Setup Photos and Configuration Radiated Electric Field Emissions CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Conducted Voltage Emissions