AK8PCWAC700802.11a/b Dual Band Wireless LAN PCMCIA Card

2.4GHz/5GHz Wireless LAN PC Card PCWA-C700 Quick Install Guide This concise guide explains how to install software required for use of the 2.4GHz/5GHz Wireless LAN PC Card PCWA-C700 and how to configure the computer for network connection. Please read this document first. This document provides an overview of the functions of the 2.4GHz/5GHz Wireless LAN PC Card PCWA-C700. Here you will also find step-by-step instructions for installing the required software and for configuring the computer for network access. When using an Access Point, you should also consult the documentation of the Access Point. • Ethernet is a registered trademark of Fuji Xerox Co., Ltd. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. • Adobe ® and Adobe ® Acrobat ® Reader are registered trademarks of Adobe Systems Incorporated. • The documentation of this product refers to the 2.4GHz/5GHz Wireless LAN PC Card PCWA-C700 as Wireless LAN PC Card. • In this document, Microsoft ® Windows ® Millennium Edition is referred to as Windows Me. Microsoft ® Windows ® 2000 Professional is referred to as Windows 2000. Microsoft ® Windows ® XP Home Edition and Microsoft ® Windows ® XP Professional Edition are referred to as Windows XP. Unpacking Your Wireless LAN PC Card comes with the following items. Capabilities The 2.4GHz/5GHz Wireless LAN PC Card PCWA-C700 is a PC Card type wireless network card. With this product, you can build a wireless LAN, such as shown below. The supplied Wireless Panel software lets you easily configure the card for multiple networks. For example, you can store different settings required for networking at the office and at home, or quickly switch between Access Point (Infrastructure) Network mode and Peer to Peer Network mode. This greatly facilitates use of the card in various environments and for a range of applications. z Hint This document explains how to configure the computer for Access Point Network mode. For information on settings for Peer to Peer Network mode, refer to the separate “Wireless LAN Quick Guide”. Accessing the Internet from various places around the house (Access Point (Infrastructure) Network mode) With a separately available Access Point you can easily build a wireless network. By connecting a DSL modem, cable modem, or ISDN router to the Access Point, you can access the Internet from the living room, bedroom, or any other convenient location in the house. Equipping multiple computers with a Wireless LAN PC Card also allows you to exchange files between the computers via the Access Point. z Hint The illustration above shows an example for a system configuration using Access Point (Infrastructure) Network mode. Two computers with Wireless LAN PC Cards communicate with the Access Point, which is connected to an Ethernet LAN via a hub. Smooth playback of streaming video data* (Peer to Peer (Ad-Hoc) mode) Peer to Peer Network mode enables computers equipped with Wireless LAN PC Cards to communicate directly. This allows playback of streaming data and file sharing also in locations where there is no Wireless LAN Access Point. * A method of playing a file while the download is still in progress. Note Poor radio signal conditions can cause interruptions of video playback. Installation settings and operation flow First, you must insert the Wireless LAN PC Card in the computer and install the required software. Then you configure the computer to enable wireless communication. After configuring the communication and Internet settings of the Access Point, you must then reconfigure the computer to reflect these settings. Step 1 Insert the Wireless LAN PC Card into the computer and install the Wireless LAN PC Card driver. Step 2 (Refer to documentation of Access Point) When using the product in Access Point Network mode, install and configure the Access Point. Step 3 Install the Wireless Panel software supplied with the Wireless LAN PC Card. Step 4 Configure the computer for wireless communication. In this step you select whether to use the product in Access Point Network mode or Peer to Peer Network mode. Step 5 (Refer to documentation of Access Point) Configure Access Point for wireless communication and for Internet access. When wishing to use the Access Point to provide Internet access to computers on the network, the Access Point must be configured for Internet access. Step 6 Reconfigure the computer to reflect the settings made in Step 5. Step 1 Insert the Wireless LAN PC Card into the computer and install the Wireless LAN PC Card driver. Before you start... If your computer has only one PC card slot and your CD-ROM drive must be connected through it, copy the “WirelessLAN” folder from the supplied CD-ROM to the hard disk of the computer before inserting the Wireless LAN PC Card. The following explanation assumes that a folder called “Temp” was created on drive D and that the data were copied to this folder. Insert the Wireless LAN PC Card into the PC Card slot of the computer, as shown below. When you insert the Wireless LAN PC card, the driver installation wizard starts automatically. The actual procedure differs slightly, depending on whether you are using Windows Me, Windows 2000, or Windows XP. Please refer to the section for the operating system you are using. Note When using a computer which has two PC Card slots arranged vertically (one above the other), insert the Wireless LAN PC Card into the top slot. If inserted into the bottom slot, the antenna of the Wireless LAN PC Card will block the top slot. z Hint For detailed information on inserting and removing the Wireless LAN PC Card and on uninstalling the Wireless LAN PC Card driver, refer to the User’s Guide supplied as a PDF file in the folder “manual” on the CD-ROM. For Windows Me 1Select “Specify the location of the driver”, and click “Next”. 2Select “Specify a location”. 3Click “Browse”, and specify the driver location. z Hint If you copied …

Text truncated - open the document above for the full version.

Operating Instructions IEEE802.11a/b Dual Band Wireless PC Card PCWA-C700 4-672-859-11(1) © 2003 Sony Corporation 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner’s Record The model and serial numbers are located on the back of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-C700 Serial No.______________ CAUTION Any changes or modifications not expressly approved in this manual could void your warranty. FCC ID: AK8PCWAC700 Exposure to Radio Frequency Radiation. The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Trade Name: Sony Model No: PCWA-C700 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety Information WARNING • Opening the unit, for whatever reason, could lead to damages that are not covered by the warranty. • Do not use this equipment on hospital premises. Doing so may cause medical devices to malfunction. • If using the equipment near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker. • Do not use this equipment in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sure you remove the equipment from the PC card slot before carrying your computer onto an aircraft. • When using the unit with 802.11a (5 GHz), use it indoors. • Do not apply unnecessary physical strain on the unit when it is inserted in your computer as this could damage the unit and/or your computer. • The use of optical instruments with this product will increase eye hazard. 3 • Install and connect this product by following descriptions in its Operating Instructions and Quick Install Guide before using it. • This equipment generates and radiates radio- frequency energy. SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65, Supplement C and guidelines established in IEEE C95.1-1991. The user is advised to maintain a distance of at least 3 mm from the antenna of this device while it is in use. Users are not permitted to make changes or modify the system in any way. About the supplied software THE SUPPLIED SOFTWARE IS SUPPLIED PURSUANT TO THE APPLICABLE END- USER LICENSE AGREEMENT. • Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the software without the permission of the copyright holder. • In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product. • In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it at SONY’s option or issue a refund; however, SONY bears no other responsibility. • The software provided with this product cannot be used with equipment other than that which is designated for use with. • Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. Program © 2001, 2002, 2003 Sony Corporation, © 2000-2003 Atheros Communications, Inc., All Rights Reserved Documentation © 2003 Sony Corporation Sony, VAIO, and the VAIO logo are trademarks of Sony Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. MMX and Pentium are registered trademarks of Intel Corporation. Ehternet is a registered trademark of Xerox Co., Ltd. All other trademarks are trademarks of their respective owners. Notes • The user interface of the Sony supplied software may differ slightly from that shown in this manual. • This manual is written based on the assumption that you are familiar with basic operations of the Windows operating system. For computer operations, refer to manuals that come with your computer. • In this manual, Microsoft ® Windows ® Millennium Edition is referred to as Windows Me. • In this manual, Microsoft ® Windows ® 2000 Professional is referred to as Windows 2000. • In this manual, Microsoft ® Windows ® XP Professional and Microsoft ® Windows ® XP Home Edition are referred …

Text truncated - open the document above for the full version.

Operating Instructions IEEE802.11a/b Dual Band Wireless PC Card PCWA-C700 4-672-859-11(1) © 2003 Sony Corporation 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner’s Record The model and serial numbers are located on the back of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-C700 Serial No.______________ CAUTION Any changes or modifications not expressly approved in this manual could void your warranty. FCC ID: AK8PCWAC700 Exposure to Radio Frequency Radiation. The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Trade Name: Sony Model No: PCWA-C700 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety Information WARNING • Opening the unit, for whatever reason, could lead to damages that are not covered by the warranty. • Do not use this equipment on hospital premises. Doing so may cause medical devices to malfunction. • If using the equipment near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker. • Do not use this equipment in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sure you remove the equipment from the PC card slot before carrying your computer onto an aircraft. • When using the unit with 802.11a (5 GHz), use it indoors. • Do not apply unnecessary physical strain on the unit when it is inserted in your computer as this could damage the unit and/or your computer. • The use of optical instruments with this product will increase eye hazard. 3 • Install and connect this product by following descriptions in its Operating Instructions and Quick Install Guide before using it. • This equipment generates and radiates radio- frequency energy. SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65, Supplement C and guidelines established in IEEE C95.1-1991. The user is advised to maintain a distance of at least 3 mm from the antenna of this device while it is in use. Users are not permitted to make changes or modify the system in any way. About the supplied software THE SUPPLIED SOFTWARE IS SUPPLIED PURSUANT TO THE APPLICABLE END- USER LICENSE AGREEMENT. • Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the software without the permission of the copyright holder. • In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product. • In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it at SONY’s option or issue a refund; however, SONY bears no other responsibility. • The software provided with this product cannot be used with equipment other than that which is designated for use with. • Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. Program © 2001, 2002, 2003 Sony Corporation, © 2000-2003 Atheros Communications, Inc., All Rights Reserved Documentation © 2003 Sony Corporation Sony, VAIO, and the VAIO logo are trademarks of Sony Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. MMX and Pentium are registered trademarks of Intel Corporation. Ehternet is a registered trademark of Xerox Co., Ltd. All other trademarks are trademarks of their respective owners. Notes • The user interface of the Sony supplied software may differ slightly from that shown in this manual. • This manual is written based on the assumption that you are familiar with basic operations of the Windows operating system. For computer operations, refer to manuals that come with your computer. • In this manual, Microsoft ® Windows ® Millennium Edition is referred to as Windows Me. • In this manual, Microsoft ® Windows ® 2000 Professional is referred to as Windows 2000. • In this manual, Microsoft ® Windows ® XP Professional and Microsoft ® Windows ® XP Home Edition are referred …

Text truncated - open the document above for the full version.

2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner’s Record The model and serial numbers are located on the back of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-C700 Serial No.______________ CAUTION Any changes or modifications not expressly approved in this manual could void your warranty. FCC ID: AK8PCWAC700 Exposure to Radio Frequency Radiation. The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Trade Name: Sony Model No: PCWA-C700 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety Information WARNING • Opening the unit, for whatever reason, could lead to damages that are not covered by the warranty. • Do not use this equipment on hospital premises. Doing so may cause medical devices to malfunction. • If using the equipment near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker. • Do not use this equipment in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sure you remove the equipment from the PC card slot before carrying your computer onto an aircraft. • When using the unit with 802.11a (5 GHz), use it indoors. • Do not apply unnecessary physical strain on the unit when it is inserted in your computer as this could damage the unit and/or your computer. • The use of optical instruments with this product will increase eye hazard.

Operating Instructions IEEE802.11a/b Dual Band Wireless PC Card PCWA-C700 4-672-859-12(1) © 2003 Sony Corporation 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner’s Record The model and serial numbers are located on the back of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-C700 Serial No.______________ CAUTION Any changes or modifications not expressly approved in this manual could void your warranty. FCC ID: AK8PCWAC700 Exposure to Radio Frequency Radiation. The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. Only use the product indoors when using it with 802.11a (5 GHz). Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Trade Name: Sony Model No: PCWA-C700 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety Information WARNING •Opening the product, for whatever reason, could lead to damages that are not covered by the warranty. •Do not use this product on hospital premises. Doing so may cause medical devices to malfunction. •If using the product near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker. •Do not use this product in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sure you remove the equipment from the PC card slot before carrying your computer onto an aircraft. •Do not apply unnecessary physical strain on the product when it is inserted in your computer as this could damage the product and/or your computer. •The use of optical instruments with this product will increase eye hazard. 3 FCC RF Exposure Install and connect this product by following descriptions in its Operating Instructions before using it. This equipment generates and radiates radio frequency energy. SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65. Supplement C and guidelines established in IEEE C95.1-1991. In order to comply with FCC RF exposure limits please maintain at least 3 mm spacing between the user and the antenna of this device while it is in use. This product can only be used with desktop computers and laptop (notebook) computers with side mounted PCMCIA slots. This device cannot be used with other types of host devices, such as PDAs. Users are not permitted to make changes or modify the system in any way. About the supplied software THE SUPPLIED SOFTWARE IS SUPPLIED PURSUANT TO THE APPLICABLE END- USER LICENSE AGREEMENT. •Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the software without the permission of the copyright holder. •In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product. •In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it at SONY’s option or issue a refund; however, SONY bears no other responsibility. •The software provided with this product cannot be used with equipment other than that which is designated for use with. •Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. Program © 2001, 2002, 2003 Sony Corporation, © 2000-2003 Atheros Communications, Inc., All Rights Reserved Documentation © 2003 Sony Corporation Sony, VAIO, and the VAIO logo are trademarks of Sony Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. MMX and Pentium are registered trademarks of Intel Corporation. Ehternet is a registered trademark of Xerox Co., Ltd. All other trademarks are trademarks of their respective owners. Notes •The user interface of the Sony supplied software may differ slightly from that shown in this manual. •This manual is written based on the assumption that you are familiar with basic operations of the Windows operating system. For computer operations, refer to manuals that come with your computer. •In this manual, Microsoft ® Windows ® Millennium Edition is referred to …

Text truncated - open the document above for the full version.

Akzo Nobel K. K. EMC Division Bancho Kaikan 12-1, Gobancho, Chiyoda-ku Tokyo 102-0076 Japan Tel.+81 3 5210 5411 Fax.+81 3 5216 2860 January 16, 2003 Office of Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Atten: Reviewing Engineer Subject: Request of the Part 15 unlicensed modular transmitter approval FCC ID: AK8PCWAC700 FCC Rules Part(s): 15.247 (15C), 15.407 (15E) Dear Sirs, This letter serves as an official request for the modular transmitter approval under FCC rules, Public Notice DA 00-1407. We, on behalf of Sony Corporation, would ask you to approve the AK8PCWAC700 as a modular transmitter. Please contact us if there is any information you may need. Sincerely yours, Izumi Mitsui Technology Management Group EMC Division AKZO NOBEL K. K. Email: [email protected]

March 17, 2003 To: Diane Poole [email protected] FCC Application Processing Branch Re: FCC ID AK8PCWAC700 Applicant: Sony Corporation Correspondence Reference Number: 24914 731 Confirmation Number: EA621908 Dear Diane, Our answers are as follows. 1) The user cannot select the antenna. The antenna can be switched automatically due to the transmission condition. Please see the exhibits “Parts/Tune Up Information – Transmitter and antenna position” and “Operational Description – Theory of operation f) 5 G antenna Switch” and “Theory of operation f) 2.4 G Antenna Switch” that I have submitted on March 12 although I had already submitted it for Part 15C. (See attached file, Answer 1 that includes all documents of the above.) 2) EMC Measurements in OFDM mode measures maximum output power at 11.6 dBm without the cable loss factor. With the cable loss compensation (1.4 dB), the actual maximum output conducted power is 11.6 + 1.4 = 13.0 dBm (20 mW). The SAR measurement power data listed on the report inadvertently did not reflect the cable loss factor. Therefore the original SAR measurements were made at an actual power level of 11.0 + 1.4 = 12.4 dBm. To confirm the maximum SAR level, the worst-case SAR configuration was re-tested at the maximum power level using the worst-case notebook PC (See Attached table and plot). The maximum SAR for this device in OFDM mode is 1.31 W/kg as shown in the amended report (See attached file, Answer 2). 3) Please see re-submitted user manual 1. 4) All modes of operation were investigated, and worst-case results are reported. Data Transfer Rate is at 54 MBps. Please refer to page 22 Note 2 of SAR test report that was already submitted. 5) Please find attached full details of probe calibration, including verification of linearity with device signal type. (See attached file, Answer 5) 6) Please fi…

Text truncated - open the document above for the full version.