AK8WGC20Portable Wireless Server

WG-C20 series 4-479-250-11(1) 4-479-250-11(1) Portable Wireless Server Important information Information importante WG-C20 Series © 2013 Sony Corporation Printed in China WARNING Do not expose the batteries to excessive heat such as sunshine, fire or the like. UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed. For question regarding your product or for the Sony Service Center nearest you, call 1-888-593-SONY (7669) in the United States or 1-877-899-7669 in Canada. The number below is for the FCC related matters only. For Customers in the U.S.A. Regulatory Information Declaration of Conformity Trade Name : SONY Model No. : WG-C20 Responsible Party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No. : 858-942-2230 This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For Customers in the U.S.A. and Canada RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www. rbrc.org/ Caution: Do not handle damaged or leaking Lithium-Ion Batteries. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This equipment has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. The maximum SAR level tested for WG-C20 has been shown to be 0.33 W/kg at 1 cm separation from Body. For Customers in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 B/NMB-3 B Read this before using Regarding copyrights The items you saved can be enjoyed as an individual; and under the Copyright Act, they cannot be used otherwise without consent from the rights holders. Battery remaining charge related precautions This device contains a rechargeable battery. If you save to a memory device while the battery has a low remaining charge, the battery charge can run out during the saving process, so the saving can fail. Disclaimer of guarantee of recorded content Even in any situation, such as if you cannot save to external media etc due to some cause such as this device’s defects, or if some defect or repair etc causes damage or destruction of saved content in external media, Sony bears absolutely no responsibility of compensating for saved content nor responsibility for any related damages. Also, Sony does not do recovery, restoration, duplication, etc of saved content, in any situation. Precautions on use  Do not drop it, put a heavy thing on top of it, hit it with a strong shock, or put pressure on it. These can cause this product to fail.  Do not place it in places like the following.  Very hot places: Hit by direct sunlight, near a heater, etc It can discolor, deform, or fail.  Very cold place, or hot place  On a car dashboard or in a car with its windows closed under a hot sun (especially in summer)  Very dusty place  On a shaky table or inclined place  Place with much vibration  Very humid place: Bathroom, etc  Near a thing which creates a magnetic field: Magnet, speakers, TV, etc  When you hear static on the radio or TV, turn off the power to this product, and move this product away from the radio or TV.  When using this p…

Text truncated - open the document above for the full version.

WG-C20 Series 4-479-235-11(1) © 2013 Sony Corporation Printed in China WG-C20 Series About Help Guide You can see Help Guide on the app or the web browser. On the app Download the Help Guide by selecting [Setting]  [Downloading the Help Guide]. On the web browser Connect your device to the Internet while your device is connected to this unit, then access (http://www. sony.net/c20/) from your browser. If your device is not connected to the Internet while your device is connected to this unit, you cannot see the Help Guide on your browser. See the Help Guide for how to connect the Internet. Identifying the Parts USB A port *1 USB micro B port *2 ACCESS (data access) lamp (Wireless LAN indicator) lamp (Power feeding indicator) lamp Battery indicator lamp (Power) button Card slot (SD card) NFC touch point *1 For powering a smartphone or tablet/ For connecting to a USB memory, etc. *2 For charging this unit/ For connecting to a computer RESET (reset) switch MAC address The MAC address on the label on the bottom of this unit may be needed for connecting. Write it down in the space below. Lamp Indicator of this Unit Battery indicator lamp Lamp condition Status Charging indicator AmberCharging underway Amber -> offCharging is complete Remaining battery level indicator in use Green, blinking slowly Battery level is high Green, blinkingBattery level is medium Red, blinking rapidly Battery level is low OffBattery runs out or power-off Wireless LAN indicator lamp Lamp conditionStatus GreenWireless LAN is on Green, blinkingWireless LAN is starting up OffPower-off • When this unit is in the power feeding mode, the lamp is turned off. Power feeding indicator lamp Lamp conditionStatus GreenDuring or ready for power feeding Red, blinkingError OffPower-off Expressions in this Guide We use the following expressions in this document. WG-C20  “This unit” Smartphone/tablet  “Device” File Porter  “File Manager xxx” Examples of Use  Wi-Fi Storage USB memory Memory card WG-C20 View & Transfer content Transfer content Smartphone Tablet PC Wi-Fi connection  Battery Charger WG-C20 Power feeding Smartphone USB connection  USB Card Reader Memory card WG-C20 Transfer content PC USB connection  Data transfer away from home* *Refer to the Help Guide for details. • When the USB 2.0 micro B port is connected to another device such as a computer, power feeding and data access from the USB 2.0 A port to another device cannot be used. And the power feeding indicator lamp is turned off. ACCESS (data access) lamp Lamp conditionStatus AmberUpdating the system software or an error occurred Amber, blinkingAccessing data Step1:Charging this unit This unit has a built-in rechargeable battery pack. Charge this unit before use. Charge this unit from a computer or with a USB AC adaptor (sold separately). Charging from a computer Connect this unit to your computer with the USB cable (supplied). Battery indicator lamp USB cable (supplied) Charging with a USB AC adaptor (sold sepalately) You can charge this unit by connecting the USB cable (supplied) to this unit and the USB AC adaptor (sold separately), then connect the USB AC adaptor to the wall outlet (wall socket). Refer to the support page (http://www.sony.net/ c20/) for USB AC adaptors that have been confirmed to work with this unit. When charging is complete, the battery indicator lamp turns off. When charging is complete, remove the USB cable. Approximate charging time Charging devices Charging time ComputerXX h USB AC adaptor (when using AC-UD10) XX h* * Approximate charging time varies depending on the USB AC adaptor (sold separately) used. Step2:Turning on the power Press and hold down the (Power) button for 3 seconds or more. The power of this unit turns on, then the battery indicator lamp lights. During wireless LAN start up, the wireless LAN indicator lamp blinks. When start up is complete, the lamp remains lit. Battery indicator lamp (Power) button (Wireless LAN indicator) lamp Notes • When the battery level is low, the remaining battery level indicator blinks (red). Charge this unit. • It may take several minutes for this unit to start after turning the power on. This is not a malfunction. To turn off this unit Press and hold down the (Power) button for 3 seconds or more. The power of this unit turns off then the wireless LAN indicator lamp and the battery indicator lamp turn off. Note • Do not turn off the power of this unit during data transfer. Connect a memory card or USB device Note • Removing the memory card or USB device from this unit while accessing it, can damage important data. Before removing them, make sure that the data access lamp is not blinking. Step3(a):Installing and launching the App (when using NFC) Check the operating guide of your smartphone to see whether your smartphone supports NFC*. If your smartphone is NFC-enabled, proceed to the steps below. If your smartphone is not NFC-enabled, see “Step3(b):Installing and launching the App (when not using NFC).” *NFC is a technology for short-range wireless communication between various devices, such as a mobile phone and IC tag etc. Installing the App Touch your NFC-enabled smartphone or tablet against the NFC touch point of this unit. The device will access the application page on Google Play automatically. If the camera and the smartphone or tablet cannot be connected by NFC, do as follows. Move your smartphone slowly above the N mark of this unit. If your smartphone is in a case, remove the case. Connecting via a Wireless LAN and Launching the App Touch your smartphone against the N mark of this unit. When the home screen of the app appears, the connection is complete. Step3(b):Installing and launching the App (when not using NFC) When not using NFC functions, operate as follows. Installing the App To operate this unit, install a dedicated app onto your device. See the support page (http://www.sony.net/c20/) for compatible operating systems and a list of devices that have been confirmed to w…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

Label location

Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

FCC ID: AK8WGC20 Report No.: RF130823D07 Operational Description This device is a Portable Wireless Server, which operates in the 2.4GHz frequency spectrum with throughput of up to 150Mbps which OFDM technique will be applied. If the signal to noise ratio is too poor which could not support 150Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by AC adapter. The antenna used in this product is Chip antenna. The other instruction, please have a look at the users manual.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 21 Report No. : SA130823D07 Issued Date : Oct. 07, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130823D07 Applicant : Sony Corporation Address : 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan Product : Portable Wireless Server FCC ID : AK8WGC20 Brand : SONY Model No. : WG-C20 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 / IEEE 1528a-2005 FCC OET Bulletin 65 Supplement C (Edition 01-01) / KDB 865664 D01 v01r01 KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 / KDB 941225 D06 v01r01 Date of Testing : Sep. 10, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 21 Report No. : SA130823D07 Issued Date : Oct. 07, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 14 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods .........…

Text truncated - open the document above for the full version.

Report No.: RF130823D07 1 of 50 Report Format Version 5.2.0 FCC TEST REPORT REPORT NO.: RF130823D07 MODEL NO.: WG-C20 FCC ID: AK8WGC20 RECEIVED: Aug. 23, 2013 TESTED: Aug. 6 ~ Sep. 10, 2013 ISSUED: Oct. 15, 2013 APPLICANT: Sony Corporation ADDRESS: 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130823D07 2 of 50 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................ 4 1. CERTIFICATION ............................................................................................. 5 2. SUMMARY OF TEST RESULTS ..................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................. 6 3. GENERAL INFORMATION ............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 7 3.2 DESCRIPTION OF TEST MODES .................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................. 9 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 12 4. TEST TYPES AND RESULTS ....................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................ 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ..... 13 4.1.2 TEST INSTRUMENTS .................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 15 4.1.5 TEST SETUP ................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS .................................................................. 16 4.1.7 TEST RESULTS ............................................................................................ 17 4.2 CONDUCTED EMISSION MEASUREMENT ................................................ 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................. 30 4.2.2 TEST INSTRUMENTS .................................................................................. 30 4.2.3 TEST PROCEDURES ................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 31 4.2.5 TEST SETUP ................................................................................................ 32 4.2.6 EUT OPERATING CONDITIONS .................................................................. 32 4.2.7 TEST RESULTS ............................................................................................ 33 4.3 6DB BANDWIDTH MEASUREMENT ............................................................ 35 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ......................................... 35 4.3.2 TEST SETUP ................................................................................................ 35 4.3.3 TEST INSTRUMENTS .................................................................................. 35 4.3.4 TEST PROCEDURE ..................................................................................... 35 4.3.5 DEVIATION FROM TEST STANDARD ......................................................... 35 4.3.6 EUT OPERATING CONDITIONS .................................................................. 35 4.3.7 TEST RESULTS ............................................................................................ 36 4.4 CONDUCTED OUTPUT POWER ................................................................. 37 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .................. 37 4.4.2 TEST SETUP ................................................................................................ 37 4.4.3 TEST INSTRUMENTS .................................................................................. 37 4.4.4 TEST PROCEDURES ...........................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130823D07 Revision : R01 <Photographs of EUT> <Antenna Location> The separation distance for antenna to edge: Antenna To Top Side (mm) To Bottom Side (mm) To Left Side (mm) To Right Side (mm) WLAN 40.3 99.96 3.75 65.65 EUT Top Side EUT Bottom Side EUT Left Side EUT Right Side WLAN Antenna <EUT Front View> FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130823D07 Revision : R01 <Photographs of SAR Setup> Front Face of EUT with 1.0 cm Gap Rear Face of EUT with 1.0 cm Gap Left Side of EUT with 1.0 cm Gap

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST