AK8YY2980USB Transceiver

YY29 80 (UC) [EN/FR/ES] 5-052-424-11(1) ©2023 Sony Corporation Printed in Vietnam Imprimé au Vietnam https://www.sony.net/ Reference GuideGuide de référenceGuía de referencia 5-052-424-11(1) Model, Modèle, Modelo: YY2980 https://rd1.sony.net/help/ mdr/2977/h_zz/ FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this unit. If you have any questions about this product: Visit: https://www.sony.com/electronics/support Contact: Sony Customer Information Service Center at 1-800-222-7669 Supplier’ s Declaration of Conformity Trade Name: SONY Model: YY2980 Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This unit has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the unit and receiver. •Connect the unit into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This unit must not be co-located or operated in conjunction with any other antenna or transmitter. This unit complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This unit has very low levels of RF energy. This conformity statement is only applicable to the YY2980. For customers in Canada This unit contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This unit may not cause interference; and (2) This unit must accept any interference, including interference that may cause undesired operation of the unit. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The unit has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This conformity statement is only applicable to the YY2980. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The unit has been tested and found to comply with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This conformity statement is only applicable to the YY2980. Do not use the unit while walking, driving, or cycling. Doing so may cause traffic accidents. Do not use in hazardous areas unless the surrounding sound can be heard. If water or foreign matter enters the unit, it may result in fire or electric shock. If water or foreign matter enters the unit, stop use immediately and consult your nearest Sony dealer. In particular, be careful in the following cases. • When using the unit near a sink or liquid container Be careful that the unit does not fall into a sink or container filled with wat er. •When using the unit in the rain or snow, or in humid locations For details on the effects of contact with the human body from the mobile phone or other wireless devices connected to the unit, refer to the instruction manual of the wireless device. Never insert the USB plug when the unit or charging cable is wet. If the USB plug is inserted while the unit or charging cable is wet, a short circuit may occur due to liquid (tap wate…

Text truncated - open the document above for the full version.

1 Basic User Manual Gaming TWS earbuds(YY2977) and USB transceiver dongle(YY2980) Charging the headset 1.Set the headset units(YY2977) into the charging case. 2.Connect the charging case to an AC outlet. Use the supplied USB Type-C cable and a commercially available USB AC adaptor. The indicator (orange) on the charging case lights up, and charging starts on the headset and the charging case. When charging of the headset and the charging case is complete, the indicator (orange) on the charging case turns off automatically. 3.Remove the USB Type-C cable. Wearing the headset 1. Hold the headset unit with your fingers. 2. Put the headset units into both ears, and adjust the fit of the headset units to your ears. Twist the headset unit to slide the earbud tip deep into your ear canal. 2 Connecting to a computer 1.Turn on the headset. 2.Connect the supplied USB transceiver(YY2980) to your computer. When you connect the USB transceiver to your computer, the transceiver automatically connects to the headset, and then the indicator (white) of the USB transceiver lights up. If the transceiver cannot connect to the headset, press and hold the pairing button of the USB transceiver for about 5 seconds or more. Set the slide switch of the USB transceiver to the “PC” side. 3. Open the [Sound] screen on your computer and confirm the connection. “Speakers YY2980 - Chat” and “Speakers YY2980 - Game” are displayed under the [Playback] tab on the [Sound] screen, the USB transceiver is recognized by your computer and can be used as a playback device. Pairing button To the USB port 3 Pairing and connecting with an Android smartphone 1. Set the headset units into the charging case. 2. With the charging case lid open, press and hold the pairing button on the back of the charging case for about 5 seconds. The indicator on the charging case starts flashing in blue. 3. Remove the headset units from the charging case and then put the headset units into your ears. 4. With the Android smartphone supporting LE Audio, turn on the smartphone ’ s Bluetooth function. 5. Touch [YY2977]. The headset and Android smartphone are paired and connected with each other. You will hear a notification sound from both headset units at the same time. Operating the headset 1. Put the headset units into both ears. 2. Operate the touch sensors of the headset units. To switch the noise canceling function and Ambient Sound Mode Tap the touch sensor on the left headset unit. Each time you tap, the function switches as follows: Noise canceling function “ON” -> Ambient Sound Mode “ON” -> Noise canceling function “OFF”/Ambient Sound Mode “OFF” To switch the microphone on/off Hold your finger to the touch sensor on the left headset unit. Each time you hold your finger to the touch sensor, the microphone switches between on and off. 4 (To increase the volume) Tap the touch sensor on the right headset unit. The volume increases by 1 step. (To decrease the volume) Hold your finger to the touch sensor on the right headset unit. The volume decreases by 1 step (it decreases continuously when you keep holding your finger to the touch sensor). Receiving a call 1. Connect the headset to an Android smartphone via a Bluetooth connection beforehand. 2. When you hear a ring tone, tap the touch sensor on the left or right headset unit twice quickly to receive the call. 3. When you have finished your call, tap the touch sensor on the left or right headset unit twice quickly to end the call. Resetting the headset If the headset cannot be turned on or cannot be operated even when it is turned on, reset the headset. This section explains how to reset one of the headset units at a time. 1. Set one of the headset units into the charging case. Leave the charging case lid open. 2. Press and hold the reset button of the charging case for about 20 seconds or more. 5 After about 15 seconds, the indicator (orange) on the charging case flashes slowly for about 5 seconds. Then, the indicator on the charging case turns off and the headset will be reset. When resetting is complete, the indicator (orange or green) on the charging case lights up for about 3 seconds, and then turns off. 3. Check that the indicator turns off and then release your finger. 4. Remove the headset unit from the charging case and start the operation again from step 1. with the other headset unit.

CFR 47 §2.911 (d)(5) Attestation Date: June-07-2023 FCC ID: AK8YY2980 T o: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1.S ony Group Corporation (“the applicant”) certifies that the equipment for whic h authorization is sought is not “covered” equipment prohibited from receiving an equi pment authorization pursuant to section 2.903 of the FCC rules. 2. Sony Group Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, . NAME: Takeshi Kobayashi TITLE: Product Compliance manager Applicant: Sony Group Corporation Address: 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

Sony Group Corporation C FR 47 §2.911 (d)(7) Agent Designation Attestation Date: February 10, 2023 Grantee Code: AK8 FRN: 0003739166 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA S ony Group Corporation (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U . S. Agent Information: Mr. Mark Arthurs FRN 0033408097 Sony Electronics Inc. 16535 Via Esprillo San Diego California, 92127 [email protected] S incerely yours, Kazuyuki Hori Chief EMC/RF Compliance Specialist Sony Group Corporation

Sony Group Corporation Authorization Letter To whom it may concern; I hereby authorize the person below Takeshi Kobayashi Sony Corporation to sign the following documents on my behalf. - FCC Form 731 with Grantee code AK8 - Confidentiality request letter - Letter of Agency - Any other application document that needs signature by Grantee for any FCC Part 15 applications by way of any third-party agents. This authorization is valid until further written notice from the applicant. Date: April 1, 2021 Place: Tokyo, Japan Kazuyuki Hori Chief EMC/RF Compliance Specialist Sony Group Corporation

Date: 6/7/2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 SUBJECT: FCC Application for FCC ID : AK8YY2980 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, . NAME: Takeshi Kobayashi TITLE: Product Compliance manager Applicant: Sony Group Corporation Address: 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

Date: 6/7/2023 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: AK8YY2980 T o Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. •Schematics •PC B Layout •Block Diagram •Operational Description •Part List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2023-10- 12 after the grant date): •External Photos •Internal Photos •Test Setup Photos •User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. B est Regards . NAME: Takeshi Kobayashi TITLE: Product Compliance manager Applicant: Sony Group Corporation Address: 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

USB Transceiver USB Transceiver USB Transceiver

FCC ID Location Bottom of the Dongle FCC ID : AK8YY2980 label is laser print in enclosure and with durable and not easily removed

USB Transceiver Internal USB Transceiver Board USB Transceiver _ Pattern Antenna

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-716, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-23T0013 Page (1 ) of (58) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected]. KES-QP16-F01(00-23-01-01) FCC SAR Test Report Report No. : KES-SR-23T0013 FCC ID : AK8YY2980 Applicant : Sony Group Corporation Address : 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan Manufacturer : Sony Group Corporation Address : 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan DUT Type : USB Transceiver Model Name : YY2980 Multiple Model Name: : N/A Serial Number : N/A Date of Testing : 2023.04.30 Issued Date : 2023.05.19 CERTIFICATION: The above equipment have been tested by KES Co., Ltd. Laboratory, and found compliance with the requirement of the above standards. I attest to the accuracy of data. All measurements reported herein were performed by me of were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by any government agency. Tested By : Approved By : Min-sup Kim / Engineer Wihan Jeong / Technical Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 30 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This test report is not related to KS Q ISO/IEC 17025 and KOLAS KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-716, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-23T0013 Page (2 ) of (58) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected]. KES-QP16-F01(00-23-01-01) Revision history Report No. Reason for Change Date Issued KES-SR-23T0013 Initial release 2023.05.19 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-716, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-23T0013 Page (3 ) of (58) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected]. KES-QP16-F01(00-23-01-01) TABLE OF CONTENTS 1.General Information.......................................................................................................................................... 4 1.1. Highest SAR Summary .................................................................................................................. 4 1.2. Device Overview ............................................................................................................................. 4 1.3. Power Reduction for SAR ............................................................................................................. 4 1.4. Nominal and Maximum Output Power Specifications ............................................................. 5 1.5. Simultaneous Transmission Capabilities .................................................................................. 5 1.6. DUT Antenna Locations ................................................................................................................ 5 1.7. Near Field Communications (NFC) Antenna ............................................................................. 5 1.8. Miscellaneous SAR Test Considerations ................................................................................... 5 1.9. Guidance Applied ........................................................................................................................... 6 1.10. Device Serial Numbers .................................................................................................................. 6 2.Introduction ....................................................................................................................................................... 7 2.1. SAR definition ................................................................................................................................. 7 2.2. SAR Measurement Setup ....…

Text truncated - open the document above for the full version.

YY2980_ BT Antenna_Dongle DVT-1 2023. 04. 05 R&D HW team 1. Passive Measurement Result VSWR & Return loss 3D Efficiency Antenna Freq. [MHz] Dongle Eff.[%]Avg.[dBi ]Peak[dBi ] 240012.0-9.20-4.93 244213.6-8.66-4.43 248013.0-8.87-4.62 2. Passive Measurement Result(Radiation Pattern) 2400MHz2440MHz2480MHz Dongle R&D HW team

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-23T0100-R1 Page ( 1 ) of ( 50 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP16-F01(00-23-01-01) TEST REPORT Part 15 Subpart C 15.247 Equipment under test USB Transceiver Model name YY2980 FCC ID AK8YY2980 Applicant Sony Group Corporation Manufacturer Sony Group Corporation Date of test(s) 2023.07.18 ~ 2023.07.21 Date of issue 2023.07.21 Issued to Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan Tel: +81-50-3750-0068 / Fax : - Issued by KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 Test and report completed by : Report approval by : Bong-Seok, Kim Test engineer Yeong-Jun, Cho Technical manager This test report is not related to KS Q ISO/IEC 17025 and KOLAS KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-23T0100-R1 Page ( 2 ) of ( 50 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP16-F01(00-23-01-01) Revision history Revision Date of issue Test report No. Description - 2023.07.20 KES-RF-23T0100 Initial R1 2023.07.21 KES-RF-23T0100-R1 Output power, Power spectral density, Conducted spurious emissions & band edge Retest KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-23T0100-R1 Page ( 3 ) of ( 50 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP16-F01(00-23-01-01) TABLE OF CONTENTS 1.General information ................................................................................................................................................... 4 1.1.EUT description ........................................................................................................................................ 4 1.2.Test configuration ...................................................................................................................................... 5 1.3.Information about derivative model .......................................................................................................... 5 1.4.Accessory information............................................................................................................................... 5 1.5.Sample calculation .................................................................................................................................... 5 1.6.Measurement Uncertainty ......................................................................................................................... 5 1.7.Frequency/channel operations ................................................................................................................... 6 2.Summary of tests ........................................................................................................................................................ 7 3.Test results.................................................................................................................................................................. 8 3.1.6㏈bandwidth ........................................................................................................................................ 8 3.2.Output power........................................................................................................................................... 11 3.3.Power spectral density ............................................................................................................................. 13 3.4.Radiated restricted band and emissions ................................................................................................... 16 3.5.Conducted spurious emissions & band edge ........................................................................................... 40 3.6.AC conducted emissions ......................................................................................................................... 46 Appendix A.Measurement equipment ......................................................................................................................... 49 Appendix B.Test setup photos ..................................................................................................................................... 50 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-23T0100-R1 Page ( 4 ) of ( 50 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP16-F01(00-23-01-01) 1.General information Applicant:Sony Group Corporation Applicant address:1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan Test site:KES Co., Ltd. Test site address:3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea 47…

Text truncated - open the document above for the full version.

K…

Text truncated - open the document above for the full version.