AORMETROLRCK3X01Touch Probe and Touch Switch

RC-K3X-001HJ RC-K3X-002HJ RC-K3X-003HJ RC-R03-003 Metrol Co., Ltd. Instruction Manual Acquired wireless certifi cations USA RC-K3X-001HJ, RC-K3X-002HJ, RC-K3X-003HJ FCC ID : AORMETROLRCK3X01 RC-R03-003 FCC ID : AORMETROLRCR0301 Federal Communications Commission (FCC) Statement 15.105(a) This equipment has been tested and found to comply with the l imits for a Class A digital device, pursuant t o part 15 of t he FCC Rules. These l imits are designed to provide reasonable protection against harmful i nterference when the equipment i s operated i n a commercial e nvironment. This equipment gener ates, uses, and can radiate radio frequency energy and, i f not i nstalled and used i n accordance with the i nstruction manual, may cause harmful i nterference to radio communications. Operation of t his equipment i n a residential a rea i s likely t o cause harmful i nterference i n which case the user will be required to correct t he interference at his own expense. 15.21 You are cautioned that changes or modifications not expressly approved by t he part r esponsible for compliance could void the user’s auth ority t o operate the equipment. FCC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating i n conjunction with any other antenna or t ransmitter. 2.This equipment complies with RF radiation exposure l imits set f orth for an uncontrolled environment. This equipment should be i nstalled and operated with a minimum distance of 5 mm between the radiator and your body. 15.19 This device complies with Part 15 of t he FCC Rules. Operation i s subject t o the following two conditions: 1) t his device may not cause harmful i nterference and 2) t his device must accept any i nterference received, i ncluding i nterference that may cause undesired operation. Taiwan xxxxxxxxxxxxxxx Mexico “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) e s posible que este equipo o dispositivo no cause i nterferencia perjudicial y (2) e ste equipo o dispositivo debe aceptar cualquier i nterferencia, i ncluyendo l a que pueda causar su operación no deseada.” 31 Terms of Warranty Before using our products, we would like to request that our customers have an understanding of our warranty policy and the functions and specifications of applicable products as indicated by our catalogs, instruction manuals and website to ensure that they are used properly under specified conditions. Durability, life time and repeatability are described based on our test conditions. Please note that the performance is not guaranteed under your specific usage environment. 1) Applicable Products The warranty defined below is applicable to products manufactured and sold by METROL (to be referred to as the "applicable products"). 2) Warranty Period The warranty for applicable products is valid for one year and three months from the original delivery date to the location designated by the customer. 3) Range of Coverage a. A replacement product will be provided on an exchange basis or the malfunctioning product will be repaired free of charge within the warranty period. If the product is or becomes defective and, at the sole discretion of METROL, the defects are due to faulty materials or workmanship. However, applicable products will not covered by the warranty in the case of the following malfunctions even within the warranty period. ( I ) Malfunctions due to use of a product in a manner that deviates from standards, specifications, environments, usage procedures or usage precautions described in the catalog, instruction manual or specifications. ( II ) Malfunctions having occurred for reasons other than those attributable to the delivered product. ( III ) Malfunctions having occurred due to disassembly, modifications or repairs made by someone other than a Metrol representative. ( IV ) Malfunctions or damage that results from external causes outside our control which shall include accidents, fires, natural disasters, or other force majeure. b. The range of coverage is limited to the warranty of the applicable product only, and any other secondary loss or damage resulting from the malfunction of an applicable product is not covered by the warranty. c. Please be aware that we do not offer installation, uninstallation, on-site confirmation, or repairs. About Signals In this Instruction Manual the seriousness and dangerousness levels of risk are denoted as follows. For Safe Use WARNING a. The handling of this product and all system operation and maintenance, etc., related to it should be handled by a specialist possessing sufficient knowledge and experience. b. This product was designed and manufactured as a general-purpose product for general industrial applications. When used in equipment or devices, etc., be sure to check the suitability of the application and the related standards, laws, and regulations. Do not use for the following applications in particular. (a) Applications where the usage conditions or environment (heat resistance, vacuum, magnetic field, etc.) exceed the functional or performance range of this product. (b) Applications that are expected to impact life or property (nuclear power equipment, transport equipment, medical equipment, etc.) or public infrastructure activities (electricity, gas, water, etc.), or any applications similar to these. c. Absolutely do not install or remove this product or operate or maintain any systems, etc., related to this product until the situation has been confirmed to be safe. d. To ensure the safe and correct use of this product, carefully read the Instruction Manual and understand its contents. Death or injury could result from not following the safety warnings and cautions or the instructions in the Instruction Manual. CAUTION : WARNING: DANGER : Caution indicates a hazardous event with a low risk that could result inminor or moderate injury if not avoided. Warning indicates a hazardous event with a moderate risk that could result …

Text truncated - open the document above for the full version.

RC-P10DX-TUHJ RC-R03-003 Metrol Co., Ltd. Instruction Manual Acquired wireless certifi cations USA RC-P10DX-TUHJ FCC ID : AORMETROLRCK3X01 RC-R03-003 FCC ID : AORMETROLRCR0301 Federal Communications Commission (FCC) Statement 15.105(a) This equipment has been tested and found to comply with the l imits for a Class A digital device, pursuant t o part 15 of t he FCC Rules. These l imits are designed to provide reasonable protection against harmful i nterference when the equipment i s operated i n a commercial e nvironment. This equipment generates, uses, and can radiate rad io frequency energy and, i f not i nstalled and used i n accordance with the i nstruction manual, may cause harmful i nterference to radio communications. Operation of t his equipment i n a residential a rea i s likely t o cause harmful i nterference i n which case the user will be required to correct t he interference at his own expense. 15.21 You are cautioned that changes or modifications not expressly approved by t he part r esponsible for compliance could void the user’s authority t o operate the equipment. F CC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating i n conjunction with any other antenna or t ransmitter. 2.This equipment complies with RF radiation exposure l imits set f orth for an uncontrolled environment. This equipment should be i nstalled and operated with a minimum distance of 5 mm between the radiator and your body. 15.19 This device complies with Part 15 of t he FCC Rules. Operation i s subject t o the following two conditions: 1) t his device may not cause harmful i nterference and 2) t his device must accept any i nterference received, i ncluding i nterference that may cause undesired operation. Taiwan xxxxxxxxxxxxxxx Mexico “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) e s posible que este equipo o dispositivo no cause i nterferencia perjudicial y (2) e ste equipo o dispositivo debe aceptar cualquier i nterferencia, i ncluyendo l a que pueda causar su operación no deseada.” 31 Terms of Warranty Before using our products, we would like to request that our customers have an understanding of our warranty policy and the functions and specifications of applicable products as indicated by our catalogs, instruction manuals and website to ensure that they are used properly under specified conditions. Durability, life time and repeatability are described based on our test conditions. Please note that the performance is not guaranteed under your specific usage environment. 1) Applicable Products The warranty defined below is applicable to products manufactured and sold by METROL (to be referred to as the "applicable products"). 2) Warranty Period The warranty for applicable products is valid for one year and three months from the original delivery date to the location designated by the customer. 3) Range of Coverage a. A replacement product will be provided on an exchange basis or the malfunctioning product will be repaired free of charge within the warranty period. If the product is or becomes defective and, at the sole discretion of METROL, the defects are due to faulty materials or workmanship. However, applicable products will not covered by the warranty in the case of the following malfunctions even within the warranty period. ( I ) Malfunctions due to use of a product in a manner that deviates from standards, specifications, environments, usage procedures or usage precautions described in the catalog, instruction manual or specifications. ( II ) Malfunctions having occurred for reasons other than those attributable to the delivered product. ( III ) Malfunctions having occurred due to disassembly, modifications or repairs made by someone other than a Metrol representative. ( IV ) Malfunctions or damage that results from external causes outside our control which shall include accidents, fires, natural disasters, or other force majeure. b. The range of coverage is limited to the warranty of the applicable product only, and any other secondary loss or damage resulting from the malfunction of an applicable product is not covered by the warranty. c. Please be aware that we do not offer installation, uninstallation, on-site confirmation, or repairs. About Signals In this Instruction Manual the seriousness and dangerousness levels of risk are denoted as follows. For Safe Use WARNING a. The handling of this product and all system operation and maintenance, etc., related to it should be handled by a specialist possessing sufficient knowledge and experience. b. This product was designed and manufactured as a general-purpose product for general industrial applications. When used in equipment or devices, etc., be sure to check the suitability of the application and the related standards, laws, and regulations. Do not use for the following applications in particular. (a) Applications where the usage conditions or environment (heat resistance, vacuum, magnetic field, etc.) exceed the functional or performance range of this product. (b) Applications that are expected to impact life or property (nuclear power equipment, transport equipment, medical equipment, etc.) or public infrastructure activities (electricity, gas, water, etc.), or any applications similar to these. c. Absolutely do not install or remove this product or operate or maintain any systems, etc., related to this product until the situation has been confirmed to be safe. d. To ensure the safe and correct use of this product, carefully read the Instruction Manual and understand its contents. Death or injury could result from not following the safety warnings and cautions or the instructions in the Instruction Manual. CAUTION : WARNING: DANGER : Caution indicates a hazardous event with a low risk that could result inminor or moderate injury if not avoided. Warning indicates a hazardous event with a moderate risk that could result in death or serious injury if not avoided. Danger in…

Text truncated - open the document above for the full version.

Family Declaration Date: June 28, 2023 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Dear Examiner Regarding FCC ID: AORMETROLRCK3X01 Model numbers: There are multiple models submitted for equipment authorization, the only difference between the base model RC-K3X-001HJ and the additional models RC-K3X-002HJ, RC-K3X-003HJ, RC- P10DX-TUHJ is as follows: Model Base Model Additional Model Additional Model Additional Model Product Name Touch Probe Touch Probe Touch Probe Touch Switch Model No. RC-K3X-001HJ RC-K3X-002HJ RC-K3X-003HJ RC-P10DX-TUHJ Basic Difference_1 Internal component Standard Mechanical switch mechanism is same as RC- K3X-001HJ Mechanical switch mechanism is same as RC- K3X-001HJ Mechanical switch mechanism is different from RC-K3X-001HJ Basic Difference_2 Appearance Standard Part of the physical switch mechanism is same as RC- K3X-001HJ Part of the physical switch mechanism is same as RC- K3X-001HJ Part of the physical switch mechanism is different from RC-K3X- 001HJ Basic Difference_3 Function/Capability 3 dimensions switching transmission by the touch probe. Same as RC-K3X-001HJ Same as RC-K3X-001HJ 1 directional switching transmission by the touch switch. Basic Difference_4 Internal component -Spring Different spring from RC-K3X-002HJ and RC- K3X-003HJ Same as RC-K3X-003HJ Same as RC-K3X-002HJ Same as RC-K3X-001HJ Basic Difference_5 Z direction contact force 5.5N 8.0N 8.0N 5.5N Basic Difference_6 Oil filled in the connecting part Standard Different Oil from RC-K3X-001HJ Same as RC-K3X-001HJ Same as RC-K3X-001HJ That the main constructions between the additional models and the base model are identical to each other, except the basic differences as listed on the table above. Should you have any questions, please contact us. Sincerely, Name: Jim Chang Title: Manager Signature:

Date: May 12, 2023 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: AORMETROLRCK3X01 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☐ Short Term Internal Photos ☐ Permanent * ☐ Short Term Test Setup Photos ------------------ ☐ Short Term User’s Manual ☐ Permanent * ☐ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed : Printed name: Jim Chang Title: Manager Company Name: SGS Taiwan Ltd.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 1 of 8 External_RC-K3X-001HJ, RC-K3X-002HJ, RC-K3X-003HJ Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 2 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 3 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to t…

Text truncated - open the document above for the full version.

1 STATEMENT The label is affixed on an immovable part near the To p side of the device. There is no space to bear Part 15.19 statement due to the product size, the statement is specified in user manual. 2 LABEL LOCATION Model no.: RC-K3X-001HJ, RC-K3X-002HJ, RC-K3X-003HJ Top Side Bottom Side Model no.: RC-P10DX-TUHJ Top Side Bottom Side

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 1 of 9 Internal_RC-K3X-001HJ, RC-K3X-002HJ, RC-K3X-003HJ Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 2 of 9 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2211002161ER-P Page: 3 of 9 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to t…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted …

Text truncated - open the document above for the full version.