API-QCC5181Bluetooth Module

Bluetooth Module QCC5181 Product Specification Harman International Industries, Incorporated APROVED MANAGER CHECKED FILLED Customer. S.MANAGER MANAGER CHECKED CHIEF FILLED Revision control QCC5181 module_ Product Specification CONFIDENTIAL Version1.0– July. 10 th Harman International Industries, Incorporated 2 Revision Date Check by Author Remarks V1.0 2023.7.21 Echo.Lu Initial VP1.0 2023.11.29 Shuwei.hu Add Harman information, transmission power, and nameplate information QCC5181 module_ Product Specification CONFIDENTIAL Version1.0– July. 10 th Harman International Industries, Incorporated 3 Contents 1 Overview ............................................................................................................................ 4 2 Features ............................................................................................................................. 4 3 Applications ....................................................................................................................... 5 4 Specifications ..................................................................................................................... 5 5 Block Diagram .................................................................................................................... 6 6 Pin view ............................................................................................................................. 7 7 Pin Assignment .................................................................................................................. 8 8 Interfaces ......................................................................................................................... 12 8.1 USB Interface ................................................................................................................. 12 8.2 PIO ................................................................................................................................. 14 8.3 Standard I/O .................................................................................................................. 15 8.4 Pad multiplexing ............................................................................................................ 15 8.5 RESET# reset pin ............................................................................................................ 16 8.6 SYS_CTRL pin ................................................................................................................. 17 8.7 LED ................................................................................................................................. 17 9 Boot Manager .................................................................................................................. 19 10 OTP memory .................................................................................................................... 20 10.1 System timer................................................................................................................ 20 11 Charging system .............................................................................................................. 21 11.1 Li-ion charger overview and configurations ................................................................ 21 11.2 Charger connections .................................................................................................... 22 11.3 Transmission power .................................................................................................... 23 11.4 Nameplate style ........................................................................................................... 23 12 FCC ISED Statement........................................................................................................ 24 QCC5181 module_ Product Specification CONFIDENTIAL Version1.0– July. 10 th Harman International Industries, Incorporated 4 1 Overview QCC5181 Bluetooth module is an intelligent wireless audio data dual-mode transmission product independently developed by the company, which is high-end and efficient stereo wireless transmission scheme, the module adopts QCC5181 series chips to provide the module with high quality sound quality and compatibility better performance. The QCC5181 Bluetooth module adopts the drive free mode. Customers only need to connect the module to the application product, and it can be fast realize the wireless transmission of music and enjoy the fun of wireless music. 2 Features ◼ Main Chipset : QCC5181 ◼ Qualified to Bluetooth v5.4 specification ◼ Dual 240 MHz Qualcomm® Kalimba™ audio DSPs ◼ 32/80 MHz Developer Processor for applications ◼ Firmware Processor for system ◼ Flexible QSPI flash programmable platform ◼ High-performance 24‑bit stereo audio interface ◼ Digital and analog microphone interfaces ◼ Flexible LED controller and LED pins with PWM support ◼ Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0 ◼ Advanced audio algorithms ◼ Active Noise Cancellation: Hybrid, Feedforward, and Feedback modes, using Digitalor Analog Mics, enabled using license keys available from Qualcomm® ◼ Qualcomm® aptX™ and aptX HD Audio ◼ aptX Adaptive, enabled using license key ◼ Qualcomm® cVc™ Noise Cancellation Technology, enabled using license key ◼ Integrated PMU: Dual SMPS for system/digital circuits,Integrated Li-ion battery charger ◼ 99-ball 4.930 mm x 3.936 mm x 0.57 mm, 0.4 mm pitch WLCSP ◼ Integrated dual switch-mode regulators, linear regulators, and battery charger ◼ Green (RoHS compliant and no antinomy or halogenated flame retardants) ◼ Size 34.1mm x 18.7mm x 3.0mm QCC5181 module_ Product Specification CONFIDENTIAL Version1.0– July. 10 th Harman International Industries, Incorporated 5 3 Applications ⚫ Stereo Wireless Headsets. ⚫ Wired stereo headsets and headphones. ⚫ Portable stereo speakers. ⚫ Analog and USB Mulitmedia Dongle. ⚫ Home Audio System. ⚫ Qualcomm TrueWireless™ stereo earbuds 4 Specifications Model…

Text truncated - open the document above for the full version.

Certification Designating a U.S. Agent for Service of Process Date: 12-01-2023 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Section 2.911(d)(7) filing FCC ID: API-QCC5181 [Harman International Industries, Inc] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. FCC US Agent from Applicant Company Company Name: Harman International Industries, Inc Contact Name: Terry Shi Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Phone No.: 818-895-8173 Email Address: [email protected] FCC FRN (optional): 0024748147 Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Tel.: 818-895-8173 Email: [email protected]

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 12-01-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: API-QCC5181 [Harman International Industries, Inc] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Tel.: 818-895-8173 Email: [email protected]

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 12-01-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: API-QCC5181 [Harman International Industries, Inc] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Tel.: 818-895-8173 Email: [email protected]

Page 1 of 1 Authority to Act as Agent Date: __12-01-2023____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint __________ TUV Rheinland (Shenzhen) Co., Ltd. _______ to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with _Harman International Industries, Inc. / 8500 Balboa Blvd, Northridge, California, 91329, United States _______. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: __12-01-2023_________________ Agreement is valid for 12 months from the above date. By: __________________________ _Terry Shi_________________________ (Signature) (Print name) Prin.Engineer,Regulatory Compliance, Quality (Title) 818:-895-8173 (Telephone) On behalf of: Harman International Industries, Inc. (Company Name)

MS-0044715 Page 1 of 1 Revision 1 Date: _12-01-2023_______ Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: API-QCC5181 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Gain Information Datasheet Harman International Industries, Inc has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _______________________________________________ ___ Terry Shi _____________________ (Signature/Title) (Print name) Title: Prin.Engineer,Regulatory Compliance, Quality Email: [email protected]

Date: 2023-12-01 FCC ID:API-QCC5181 Type of Module: Single Modular Transmitter No. Requirements Device Conditions Comply (Y/N) 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The module has its own RF shielding. Refer to the external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. The EUT has buffered modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler. The module has an integral antenna. Y 5 The modular transmitter must be tested in a stand- alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. The modular transmitter was tested in a stand-alone configuration. Y 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. FCC ID identification number can put on the modular with a permanently affixed label. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The instructions will be provided and apply to a complete transmitter and comply with specific rule. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The total power density of modular transmitter final configuration comply with FCC RF Exposure Y If you have any questions regarding this, please don’t hesitate to contact us. Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Email: [email protected]

Photo Documentation Page 1 of 2 Product: Bluetooth Module Type Designation: QCC5181 Rev. 0 Figure 1. External view 1 Figure 2. External view 2 Photo Documentation Page 2 of 2 Product: Bluetooth Module Type Designation: QCC5181 Rev. 0 Figure 3. External view 3

Label Artwork On shielding case

Photo Documentation Page 1 of 1 Product: Bluetooth Module Type Designation: QCC5181 Rev. 0 Figure 1. Internal view 1

1 Safety Human Exposure 1.1 Radio Frequency Exposure Compliance 1.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test item : Bluetooth Module Identification / Type No. : QCC5181 FCC ID : API-QCC5181 IC : 6132A-QCC5181 HVIN : QCC5181 Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D02 v01r02 RSS-102 Issue 5 February 2021 1.1.1.1 RF Exposure Compliance Requirement for FCC FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. Max 1.24 dBi for Bluetooth. ➢ Radio Frequency Exposure Limit Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm²) 300-1,500 -- -- f/1500 1,500-100,000 -- -- 1.0 ➢ Radio Frequency Exposure Calculation Formula a) RF Exposure Evaluation standalone operations (worse case) Mode *Measured RF Output Power (dBm) EIRP (dBm) Distance (cm) Power Density (mW/cm²) FCC Limit (mW/cm²) Bluetooth 8.7 10.78 20 0.002 1.0 Note: 1. *Bluetooth RF Output Power: Refer to CN23BV1T 001 and CN23BV1T 002. 1.1.1.2 RF Exposure Compliance Requirement for IC The EUT shall comply with the requirement of RSS-102 section 2.5.2. Exemption from Routine Evaluation Limits – RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 ƒ 0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • RF exposure evaluation exempted power for 2.4GHz: 2.67 W The nominal maximum conducted output power specified: Max 2.13 dBi for Bluetooth. The Max. e.i.r.p. for Bluetooth: 10.78 dBm = 0.010W Note: 1. *Bluetooth RF Output Power: Refer to CN23BV1T 001 and CN23BV1T 002. The e.i.r.p. for Bluetooth is less than the RF exposure evaluation exempted power. So RF exposure evaluation is not required. “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

承 認 書 SPECIFICATION FOR APPROVAL 客 戶 CUSTOMER 日 期 DATE 品 名 DESCRIPTION 客 戶 料 號 CUSTOMER P/N 成 品 編 號 TEL：0512--66706846 FAX：0512-65088773 Hansong(NanJing)Technology Ltd Suzhou point positive electronic technology co.,ltd ADD ;No 3 XinLang Road ,Yinghu industrial Park, Wangting Town Xiangcheng district Suzhou City E_mail; [email protected] 2015-08-19 Antenna RC1WFI0886A Model No 45-2-000146 2 SPECIFICATION 1. Description 2. Customer 3. Model No. 4. Part No. 5. Standard 6. Antenna Profile 7. Lead Length 8. Electrical Characteristics Operating Frequency Antenna Type Impedance 9. Mechanical Characteristics Connector Core 10. Raw Material Coaxial Cable ： Dipo Antenna ： Hansong(Nanjing)Technology Ltd ： RC1WFI0886A ： 45-2-000146 ： Wifi & Bluetooth ： ： L:108MM ： 2.4~2.5Ghz 5.15~5.85Ghz ： Dipo Ant ： 50 Ohm : Gain: 1.2382dBi for 2.4 ~ 2.5GHz band Gain: 3.4668dBi for 5.15 ~ 5.85GHz band ： RP-SMA ： N/A ： RG178 Coaxilal • Model: Dipo Antenna • Manufacture ： Suzhou point positive electronic technology co.,ltd • Series Number ： QTKOTAPR00321 • Antenna Type: WLAN 802.11 a/b/g: Antenna1 & Antenna 2 Bluetooth: Antenna3 • Data ： 2023/05/15 O UTLINE S UMMARY • Test Environment and Equipment • Test Data of Antenna: Test Result : Efficiency & Peak Gain Test Result : 3D Radiation Pattern Test Taet Laboratory: Name:suzhou Laboratory Address:No.99 Hongye RD.Suzhou Industrial Park Loufeng Hi-New-Tech Development Area,Suzhou,China The test results relate only to the samples tested. T EST E NVIRONMENT AND E QUIPMENTS The Gain, Efficiency, Directivity and 3D Pattern Shanghai EM-Testing Co., Ltd. https://www.em-testing.com/ Frequency Range : WLAN 802.11 a/b/g: 2.40~2.50 & 5.125~5.85 GHz Radiation Pattern Test System : The Radiation Pattern Test System(EMT24) The antenna under tested is arranged in the turned table and a decoupling sleeve is used to reduce feed line radiation (see figure. 1 &2). when viewed from the door of the chamber. The axis arrangement is shown in Fig. 3 Fig. 3 T EST E NVIRONMENT AND E QUIPMENTS S-Parameter test • Network Analyzer • Testing range from 30KHz to 8.5GHz T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 2.4GH Z T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 2.45GH Z T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 2.5GH Z T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 5.15GH Z T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 5. 5GH Z T EST R ESULT : 2D & 3D R ADIATION P ATTERN A NTENNA 1 5.85GH Z T EST R ESULT : E FFICIENCY & P EAK G AIN Frequency (MHz)Directivity(dB)Peak Gain(dBi)Average Gain(dBi)Efficiency(dB)Efficiency(%) 24002.25961.2382-2.2683-1.021479.0418 24502.43421.2376-2.4718-1.196575.9181 24752.52031.1678-2.6398-1.352573.2402 25002.4710.9929-2.7526-1.478171.1517 51503.45131.736-2.8959-1.715267.3714 51753.20871.2482-3.1069-1.960563.6722 53503.27361.499-2.8116-1.774666.4563 53753.26761.4915-2.806-1.776166.4339 54003.99642.3024-2.6858-1.69467.702 54253.45211.583-2.8203-1.869165.027 54503.34151.7092-2.5721-1.632368.6709 54753.74172.2569-2.3905-1.484971.0419 55003.52491.8365-2.5758-1.688467.7898 58004.39622.9879-2.023-1.408472.3041 58505.02963.4668-2.1298-1.562869.7783 无锡源达电工材料有限 无锡源达电工材料有限无锡源达电工材料有限 无锡源达电工材料有限公司 公司公司 公司 WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL CO.,L CO.,LCO.,L CO.,LT TT TD. D.D. D. 中国江苏省江阴市青阳镇南陈村 邮编214401 Nachen,Qingyang Town, Jiangyin City 214400,Jiangsu, China ___________________________________________________________________________ 客户 客户客户 客户/Customer: /Customer: /Customer: /Customer: 苏州 苏州苏州 苏州点正 点正点正 点正电子 电子电子 电子科技 科技科技 科技有限 有限有限 有限公 公公 公司 司司 司__________________ ____________________________________ __________________ 客户料号 客户料号客户料号 客户料号/ Customer P/N:_ / Customer P/N:_/ Customer P/N:_ / Customer P/N:_ Y YY YD DD D1 11 178 7878 78__________ ____________________ __________ 规 规规 规 格 格格 格 书 书书 书 Specification SpecificationSpecification Specification 50 5050 50Ω ΩΩ Ω(FEP) (FEP)(FEP) (FEP)绝缘射频电缆 绝缘射频电缆绝缘射频电缆 绝缘射频电缆 50 5050 50Ω ΩΩ Ω FEP FEP FEP FEP Insulat InsulatInsulat Insulated eded ed Coaxial Cable Coaxial Cable Coaxial Cable Coaxial Cable Y YY YD DD D1 11 178 7878 78 系列 系列系列 系列 Y YY YD DD D1 11 178 7878 78 SERIES SERIES SERIES SERIES 编制 编制编制 编制/Signed by: /Signed by:/Signed by: /Signed by: cool lai cool laicool lai cool lai 编制日期 编制日期编制日期 编制日期/ Date: / Date:/ Date: / Date: 2 22 22 22 2 th thth th April 20 April 20April 20 April 2009 0909 09 无锡源达电工材料有限 无锡源达电工材料有限无锡源达电工材料有限 无锡源达电工材料有限公司 公司公司 公司 WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL WUXI YUANDA ELECTRICAL MATERIAL CO.,L CO.,LCO.,L CO.,LT TT TD. D.D. D. 中国江苏省江阴市青阳镇南陈村 邮编214401 Nachen,Qingyang Town, Jiangyin City 214400,Jiangsu, China ___________________________________________________________________________ 1. 适用范围: Scope 本规格书制定了50Ω FEP 绝缘射频电缆YD178 系列的结构和电气特性. This specification covers the construction and the electrical properties of YD178 series of 50Ω FEP Insulation Coaxial Cable. 2. 结构/Construction: 单位/Unit:mm 项目/Item 详细资料/Details 材料/Material 镀 银 铜 线/Silver-coated Copper Wire 构成(根/mm) Composition(No./mm) 7/0.102 导体/Conductor 标称直径/Nom.O.D（mm） 0．306±0.03 材料/Material /聚四氟乙烯/PTFE 标称绝缘厚度/Nom.Thick（mm） 0.275 绝缘层 /Insulation 标称外径/Nom.O.D（mm） 0.86±0.03 材料/Material 镀银铜线/ Silver-coated annealed copper wire 屏蔽层/Shield 构成/Composition 0.10单线编织/Single Braid of 0.10 材料/Material 聚全氟乙丙烯（*颜色）/FEP(*color) 标称护套厚度/Nom.Thick（mm） 0.25 标称外径/Nom.O.D(mm) 1.80±0.08 护套/Jacket 颜色/Color 按与客户确认的颜色/According to corresponding have approved by the suppliers and customers 3.电气特性(20°C时)/Electrical Properties(at 20°C) 项目/Item 单位/Unit 详细资料/Details 导体电阻/Conductor Resistance
/km Max.800 绝缘电阻/Insulation Resistance M
.kmMin.500 耐压强度/Dielectric Strength V(AC)/min 1000 静电容/Capacitance pF/m105(1kHz) 特 性 阻 抗/Characteristic Impedance
50±2.0 1GHz 1.70 2GHz 2.42 衰减/Attenuation dB/m 3GHz 3.08 无锡源达电工材料有限 无锡源达电工材料有限无锡源达电工材料有限 无锡源达电工材料有限公司 公司公司 公司 WUXI YUANDA ELECTRICAL MATERIAL …

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23BV1T 002 Auftrags-Nr.: Order no.: 168452191 Page 1 of 22 Seite 1 von 22 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-11-13 Auftraggeber: Client: Harman International Industries, Inc 8500 Balboa Blvd, Northridge, California, 91329, United States Prüfgegenstand: Test item: Bluetooth Module Bezeichnung / Typ-Nr.: Identification / Type no.: QCC5181 (Trademark: JBL) Auftrags-Inhalt: Order content: Type test Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 CFR47 FCC Part 15: Subpart C Section 15.207 CFR47 FCC Part 15: Subpart C Section 15.209 RSS-247 Issue 3 August 2023 RSS-Gen Issue 5 March 2019 Wareneingangsdatum: Date of sample receipt: 2023-11-13 Refer to photos document Prüfmuster-Nr.: Test sample no: A003599668 Prüfzeitraum: Testing period: 2023-11-13 – 2023-11-24 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Harry W. C. Wu genehmigt von: authorized by: X Signed by: Alex Lan Datum: Date: 2023-12-07 Ausstellungsdatum: Issue date: 2023-12-07 Stellung / Position: Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: API-QCC5181 IC: 6132A-QCC5181 HVIN: QCC5181 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601-1604, 17-18/F., Tower A, Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, Guangdong, China Mail: [email protected] ∙ Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN23BV1T 002 Test report no.: Page 2 of 22 Seite 2 von 22 Remarks Anmerkungen 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüf…

Text truncated - open the document above for the full version.