APIBDS280Blu-RAY DISC SYSTEM

BDS 280 / BDS 580 Blu‐ray Disc System Quick‐Start Guide Thank you for choosing a Harman Kardon product! This quick‐start guide contains all the information you need to connect and set up your new BDS Blu‐ray Disc system. To conserve our national resources, your BDS system does not include a printed owner’s manual. An owner’s manual containing complete information about operating all of your new system’s features is available on our website. Go to www.harmankardon.com and download the BDS Blu‐ray Disc System Owner’s Manual. Connections Connect the Speakers CAUTION: Before making any connections to the BDS system, ensure that the system’s AC cord is unplugged from the system and the AC outlet. Making speaker connections with the system plugged in and turned on could damage your speakers. Your BDS system has color coded speaker terminals: BDS 280 white left channel (+) red right channel (+) black (‐) on both channels BDS 580 white front left (+) red front right (+) blue surround left (+) gray surround right (+) BDS green center (+) black (‐) on both channels Most speakers use red to denote the (+) terminal and black for the (‐) terminal. Be sure to connect each speaker identically: (+) on the speaker to (+) on BDS and (‐) on the speaker to (‐) on BDS. Miswiring one or more speakers results in thin sound, weak bass, and a poor stereo image. Connect the subwoofer Connect the FM radio antenna BDS Connect a TV or video display NOTE: If your TV supports HDMI Audio Return Channel (ARC) and you access digital channels from your TV’s built‐in tuner or you have other sources already connected directly to your TV, you can feed their sound to the BDS system via the HDMI Monitor Out connector’s Audio Return Channel, and they will not require additional connections to the system. Connect to your wired home network Note: if you have a wireless home network, skip this step for now. You will use the BDS settings menus to connect to it once you’ve completed wired connections. BDS Connecting an HDMI source device BDS Connecting a component video source device [Insert new diagram showing to connect component sources to the TV and then use ARC] Connecting an optical digital audio source device Connecting a coaxial digital audio source device BDS Connecting an analog audio source device Connecting to AC power BDS System Rear Panel BDS Setting up the BDS Install the batteries in the remote control Turn on the system Set the system’s main power switch to the “ON” position. BDS System Rear Panel To set up your BDS system, you will use the remote control to navigate through the on‐screen menus and to make selections from them. BDS • Use the cursor up/down buttons to navigate through the menu list. When an item is highlighted, a white border will appear around it. • To select a highlighted item, press the OK button. The screen will change depending on your selection. • To return to the previous screen, press the Back button. BDS Initial Setup When you turn your BDS system on for the first time, the on‐screen menu will display the Initial Setup screens. The first screen allows you to set the language you want BDS menus to use. Highlight your choice and press the OK button, then the Initial Setup introduction screen will appear. Press the OK button, and the Initial Setup TV resolution screen will appear. Highlight your choice and press the OK button. Next, the Initial Setup aspect‐ratio screen will appear. 16:9 Full is the best choice for most displays. Highlight your choice and press the OK button. Next, the Initial Setup speaker package screen will appear. BDS This setting enables processing in the BDS system that will maximize your system’s audio performance. If you are using a Harman Kardon speaker package with your BDS system, select it’s model number from the list. If you’re not using a Harman Kardon speaker package, select “Other.” Configuring BDS for your speaker system Before you use your BDS, you need to configure it to work with your particular speaker system. Harman Kardon’s EzSet/EQ system uses the supplied EzSet/EQ microphone to perform this important step automatically. Before beginning, be sure you have correctly connected your speakers to the BDS system. IMPORTANT: Press the remote control “Disc” button before performing the EzSet/EQ procedure. The EzSet/EQ procedure is only available when the Disc input is selected. 1. Plug the supplied EzSet/EQ microphone into the BDS’s front panel headphone connector. Microphone input 2. Place the microphone at ear height in your main listening position. 3. Press the remote control’s Home button. The system’s Home Menu screen will appear on the TV. 4. Use the cursor and OK buttons to highlight and select Settings. The General Settings menu will appear. BDS 5. Use the down cursor button to select Sound and press OK. Next, use the down cursor to select EzSet/EQ and press OK. 6. Remain silent while the test noise plays through the speakers. As the test noise circulates among the speakers, the screen will show which speaker is being tested. 7. When the testing process is complete, the “Testing...” message on the screen will change to “All tests done!” 8. Press the Back button to exit the EzSet/EQ test procedure. NOTE: If the test fails, the “Testing...” message on the screen will change to “EzSet/EQ failed. Make sure all speakers are connected and the room is quietly then try again.” Press the Back button, make sure all speakers are correctly connected and perform the test again from step 5. Make sure the room remains silent during the test. Blue tooth auto pair BDS 580 and BDS 280 provide a NFC feature for Bluetooth auto‐pairing purpose. Bring NFC cell phone and touch BDS NFC logo, the cell phone will connect with BDS by Bluetooth and implement streaming music. Using the BDS Press the remote control Home button to display the Home Menu screen: BDS The available sources are shown in a grid. If a disc has been inserted into the system’s built‐in disc slot, it will be av…

Text truncated - open the document above for the full version.

Harman International Industries, Inc. 8500 Balboa Blvd, Nothridge, CA 91329 UNITED STATES 022311 – 6 Request for Confidentiality Date: _ July 15, 2013___ _ Subject: Confidentiality Request for: __ __ APIBDS280 _ __ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term √ Permanent Block Diagrams √ Short Term Permanent External Photos √ Short Term Permanent* 2 Internal Photos Short Term √ Permanent Operation Description/Theory of Operation Short Term √ Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term √ Permanent Schematics √ Short Term Permanent Test Setup Photos √ Short Term Permanent* User’s Manual *Note: __For Confidentiality of product market_____ __ Harman International Industries, Inc. __ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __90__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ ____ Fernando Reyes_ ____ (Signature/Title 3 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate

Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES We, Harman International Industries, Incorporated declare under our sole responsibility that the frequency of below will be used in USA. 2.412—2.4835GHz 5.745—5.825GHz Thank you. Sincerely, By: Fernando Reyes_ (Signature 1 ) (Print name) Title: __Purchaser__ On behalf of: Harman International Industries, Incorporated (Company Name) Date: 2013-07-17

External photos

Model: BDS 280 Front view Rear view Label for BDS 280 Bottom view Label

Internal photos BT module： 2.4GHz WIFI AIRPLAY module： 2.4GHz/5.8GHz WIFI module：

Maximum Permissible Exposure Compliance Requirement 1. LIMITS The limit for general population/uncontrolled exposures Frequency Power density(mW/cm 2 ) Averaging time(minutes) 300MHz~1.5GHz F/1500 30 1.5GHz~100GHz 1.0 30 Frequency(MHz) Power density(mW/cm 2 ) Averaging time(minutes) 2402 1.0 30 2412 1.0 30 2437 1.0 30 2462 1.0 30 2480 1.0 30 5745 1.0 30 5785 1.0 30 5825 1.0 30 2. EUT RF Exposure The EUT has three RF modules. One is a BT module. One is a 2.4G wifi module (airplay). One is a 2.4G/5.8G wifi module. There three modules can work together. BT module: The Max Conducted Peak Output Power is 6.85dBm (48.4mW) in 2402 of GFSK; The antenna gain of this antenna is 2dBi. 2.4G wifi module(airplay): The Max Conducted Peak Output Power is 21.89dBm (154.5mW) in channel 11 of 802.11g; The antenna gain of this antenna 1 is 3dBi 2.4G/5.8G wifi module: The Max Conducted Peak Output Power is 21.02dBm (126.5mW) in channel 1 of 802.11g; The antenna gain of this antenna is 3dBi 2dB logarithmic terms convert to numeric result is nearly 1.58. 3dB logarithmic terms convert to numeric result is nearly 2. According to the formula S=  2 4R PG ,we can calculate S which is MPE. Now , R=20 cm, P1=48.4mW, G1=1.58 ; P2=154.5mW, G2=2; P3=126.5mW, G3=2 So,S=  2 4R PG = 4.13*400*4 58.1*4.48 + 4.13*400*4 2*5.154 + 4.13*400*4 2*5.126 =0.127 mW/cm 2 So the MPE comply the requirement.

FCC ID ： APIBDS 280 TEST REPORT Report No.: EM201300327-6 Application No.: ZJ00029362 Applicant: Harman International Industries, Incorporated Applicant Address: 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Sample Description: Blu-RAY DISC SYSTEM Model: BDS 280 Adding Model: / FCC ID: APIBDS 280 Test Specification: FCC Part 15,Subpart C(Section 15.247) Test Date: 2013-05-22 to 2013-06-19 Issue Date: 2013-06-19 Test Result: PASS Prepared By: Reviewed By: Approved By: Lynn Xiao/ Test Engineer Jane Cao / Technical Assistance Gavin Wu / Manager Date:2013-06-19 Date:2013-06-19 Date:2013-06-19 Other Aspects: / Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. GRG Metrology and Test Co., Ltd. Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com Ver.:1.0 / 01.Jan.2011 Report No.: EM201300327-6 Application No.: ZJ00029362 Page 2 of 135 FCC ID ：APIBDS280 DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report No.: EM201300327-6 Application No.: ZJ00029362 Page 3 of 135 FCC ID ：APIBDS280 Table of Contents TABLE OF CONTENTS .......................................................................................................................................................... 3 1. TEST RESULT SUMMARY ............................................................................................................................................... 5 2. GENERAL DESCRIPTION OF EUT ................................................................................................................................. 6 2.1 APPLICANT .................................................................................................................................................................... 6 2.2 MANUFACTURER ......................................................................................................................................................... 6 2.3 BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................................. 6 3. LABORATORY AND ACCREDITATIONS ..................................................................................................................... 7 3.1 LABORATORY ............................................................................................................................................................... 7 3.2 ACCREDITATIONS ........................................................................................................................................................ 7 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................................... 7 3.4 LIST OF USED TEST EQUIPMENT AT GRGT ............................................................................................................. 8 4. ANTENNA REQUIREMENT ............................................................................................................................................. 9 5. CONDUCTED EMISSION MEASUREMENT ............................................................................................................... 10 5.1 LIMITS ....................................................................................................................................................................... 10 5.2 TEST PROCEDURES ................................................................................................................................................ 10 5.3 TEST SETUP ............................................................................................................................................................. 11 5.4 TEST RESULTS ......................................................................................................................................................... 12 6. RADIATED ELECTROMAGNETIC DISTURBANCE ................................................................................................. 14 6.1 LIMITS ....................................................................................................................................................................... 14 6.2 TEST PROCEDURES ................................................................................................................................................ 14 6.3 TEST SETUP ............................................................................................................................................................. 15 6.4 TEST RESULTS ......................................................................................................................................................... 17 7. 6DB BANDWIDTH TESTING .......................................................................................................................................... 41 7.1 LIMITS ....................................................................................................................................................................... 41 7.2 TEST PROCEDURES ................................................................................................................................................ 41 7.3 TEST SETUP .......…

Text truncated - open the document above for the full version.

Page 1 of 70 FCC ID ：APIBDS280 TEST REPORT Report No.: EM201300375-2 Application No.: ZJ00029362 Client: Harman International Industries, Incorporated Address: 8500 Balboa Blvd, Northridge, CA 91329, United States Sample Description: Blu-RAY DISC SYSTEM Model: BDS 280 Adding Model： / FCC ID APIBDS280 Test Specification: FCC Part 15, Subpart C(Section 15.247) Test Date: 2013-05-15 to 2013-06-28 Issue Date: 2013-06-28 Test Result: Pass. Prepared By: Reviewed By: Approved By: Lynn Xiao / Test Engineer Jane Cao / Test Engineer Gavin Wu / Manager Date:2013-06-28 Date:2013-06-28 Date:2013-06-28 Other Aspects: Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. GRG Metrology and Test Technology Co., Ltd. Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com Ver.:1.0 / 01.Jan.2011 Report No.: EM201300375-2 Application No.: ZJ00029362 Page 2 of 70 FCC ID ： APIBDS280 DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report No.: EM201300375-2 Application No.: ZJ00029362 Page 3 of 70 FCC ID ： APIBDS280 Table of Contents TABLE OF CONTENTS .......................................................................................................................................................... 3 1. TEST RESULT SUMMARY ............................................................................................................................................... 4 2. GENERAL DESCRIPTION OF EUT................................................................................................................................. 5 2.1 APPLICANT .................................................................................................................................................................... 5 2.2 MANUFACTURER ......................................................................................................................................................... 5 2.3 BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................................. 5 3. LABORATORY AND ACCREDITATIONS ..................................................................................................................... 6 3.1 LABORATORY ............................................................................................................................................................... 6 3.2 ACCREDITATIONS ....................................................................................................................................................... 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................................... 6 3.4 LIST OF USED TEST EQUIPMENT AT GRGT ............................................................................................................. 7 4. ANTENNA REQUIREMENT ............................................................................................................................................. 8 5. CONDUCTED EMISSION MEASUREMENT ................................................................................................................. 9 5.1 LIMITS ......................................................................................................................................................................... 9 5.2TEST PROCEDURES ................................................................................................................................................... 9 5.3 TEST SETUP ............................................................................................................................................................. 10 5.4 TEST RESULTS ......................................................................................................................................................... 11 6. RADIATED ELECTROMAGNETIC DISTURBANCE ................................................................................................. 13 6.1 LIMITS ....................................................................................................................................................................... 13 6.2TEST PROCEDURES ................................................................................................................................................. 13 6.3 TEST SETUP ............................................................................................................................................................. 14 6.4 TEST RESULTS ......................................................................................................................................................... 15 7. 6DB BANDWIDTH TESTING .......................................................................................................................................... 27 7.1 LIMITS ....................................................................................................................................................................... 27 7.2 TEST PROCEDURES ................................................................................................................................................ 27 7.3 TEST SETUP .....…

Text truncated - open the document above for the full version.

FCC ID ： APIBDS280 TEST REPORT Report No.: EM201300325-6 Application No.: ZJ00029362 Applicant: Harman International Industries, Incorporated Applicant Address: 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Sample Description: Blu-RAY DISC SYSTEM Model: BDS 280 Adding Model: / FCC ID: APIBDS280 Test Specification: FCC Part 15,Subpart C(Section 15.247) Test Date: 2013-05-22 to 2013-06-19 Issue Date: 2013-06-19 Test Result: PASS Prepared By: Reviewed By: Approved By: Lynn Xiao/ Test Engineer Jane Cao / Technical Assistance Gavin Wu / Manager Date:2013-06-19 Date:2013-06-19 Date:2013-06-19 Other Aspects: / Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. GRG Metrology and Test Co., Ltd. Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com Ver.:1.0 / 01.Jan.2011 Report No.: EM201300325-6 Application No.: ZJ00029362 Page 2 of 77 FCC ID ：APIBDS280 DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report No.: EM201300325-6 Application No.: ZJ00029362 Page 3 of 77 FCC ID ：APIBDS280 Table of Contents TABLE OF CONTENTS .......................................................................................................................................................... 3 1. TEST RESULT SUMMARY ............................................................................................................................................... 5 2. GENERAL DESCRIPTION OF EUT ................................................................................................................................. 6 2.1 APPLICANT .................................................................................................................................................................... 6 2.2 MANUFACTURER ......................................................................................................................................................... 6 2.3 BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................................. 6 3. LABORATORY AND ACCREDITATIONS ..................................................................................................................... 7 3.1 LABORATORY ............................................................................................................................................................... 7 3.2 ACCREDITATIONS ........................................................................................................................................................ 7 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................................... 7 3.4 LIST OF USED TEST EQUIPMENT AT GRGT ............................................................................................................. 8 4. ANTENNA REQUIREMENT ............................................................................................................................................. 9 5. CONDUCTED EMISSION MEASUREMENT ............................................................................................................... 10 5.1 LIMITS ....................................................................................................................................................................... 10 5.2 TEST PROCEDURES ................................................................................................................................................ 10 5.3 TEST SETUP ............................................................................................................................................................. 11 5.4 TEST RESULTS ......................................................................................................................................................... 12 6. RADIATED ELECTROMAGNETIC DISTURBANCE ................................................................................................. 14 6.1 LIMITS ....................................................................................................................................................................... 14 6.2 TEST PROCEDURES ................................................................................................................................................ 14 6.3 TEST SETUP ............................................................................................................................................................. 15 6.4 TEST RESULTS ......................................................................................................................................................... 17 7. 6DB BANDWIDTH TESTING .......................................................................................................................................... 29 7.1 LIMITS ....................................................................................................................................................................... 29 7.2 TEST PROCEDURES ................................................................................................................................................ 29 7.3 TEST SETUP ...........…

Text truncated - open the document above for the full version.

Test setup photos