APICOOLVOX2.0 Speakers System

Quick Start Guide /Quick Start Guide (FR) W10687103A 2 COOLVOX™ KITCHEN SOUND SYSTEM SAFETY You can be killed or seriously injured if you don't immediately You can be killed or seriously injured if you don't follow All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: follow instructions. instructions. DANGER WARNING †®BLUETOOTH is a registered trademark of Bluetooth SIG, Inc. (FR) COOLVOX™ KITCHEN SOUND SYSTEM SAFETY Risque possible de décès ou de blessure grave si vous ne suivez pas immédiatement les instructions. Risque possible de décès ou de blessure grave si vous ne suivez pas les instructions. Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et ce qui peut se produire en cas de non-respect des instructions. Votre sécurité et celle des autres est très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. AVERTISSEMENT DANGER Voici le symbole d’alerte de sécurité. Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous et à d’autres. Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou “AVERTISSEMENT”. Ces mots signifient : 3 PARTS AND FEATUR ES ■ Designed for the top o f the refrigerator; low profile to fit underneath cabinets. ■ An gled speakers fill the kitchen with sound. ■ In telligent equalization (EQ) technology: Digital signal processing (DSP) to optimize system dynamics and bass impact. ■ Bi-a mplification: the woofers and mid-range to high-range speakers are independently driven by digital Class D amplifiers for exceptional richness and clarity of sound. ■ Advanc ed transducers: Specially designed woofers produce extended bass performance with minimal distortion. Odyssey mid-range to high-range speakers project musical details over a wide listening area. ■ Drivers: Fo ur Odyssey mid-range to high-range speakers and two woofers ■ Pow er: mid-range to high-range: 4 x 6 watts @ 1% THD; ■ W oofers: 2 x 10 watts @ 1% THD ■ Fr equency response: 70Hz – 20kHz ■ In terface: Bluetooth ®† A2DP music streaming ■ Po wer supply input voltage: 100 – 240V AC, 50-60 Hz ■ Dimensions: 29" x 8 -1/2" x 1-1/2" ( 737 mm x 216 mm x 38 mm) ■ W eight: 4.3 lb (1.95kg) A. Status LED ■ Amber - Standby Mode ■ Bl inking Blue - Pairing Mode ■ S olid Blue - Connected B. Power/Pair C. Volume ABC †®BLUETOOTH is a registered trademark of Bluetooth SIG, Inc. 4 SET UP AND OPERATION 1.Remove the CoolVox™ kitchen sound system from its packaging and remove all film. 2.Place the sound system on top of the refrigerator with the front edge aligned with the front of the refrigerator cabinet. 3.Plug the power cord into the wall outlet. The status LED (A) will glow amber. 4.Pair and Play. The sound system pairs easily with your smart phone, tablet, or other Bluetooth device. It has a range of approximately 30 ft (9 m), so you can enjoy the sound you want without wires. ■ Press and release the Power/Pair button (B) on the control panel. The Status LED (A) will flash blue. ■ Select the CoolVox™ kitchen sound system from your device. ■ The Status LED (A) will glow solid blue when the sound system is properly paired with your Bluetooth device. ■ You are now ready to play your music through CoolVox. Use the controls of your Bluetooth-enabled device to start, stop, or pause the audio. NOTES: ■ If another device is already paired with the CoolVox™ sound system, press and hold the Power/Pair button (B) on the control panel for 3 seconds to cancel the existing pairing. Then, re-pair with different device by performing Step 3. ■The CoolVox™ sound system will remember the six devices most recently used, so it is even simpler to reconnect. WP - 2-Prong Plug into electrical out- let CoolVoxCoolVox Accept 5 TROUBLESHOOTING Operation Bluetooth PROBLEMPOSSIBLE CAUSES SOLUTIONS The CoolVox™ sound system will not operate There is no sound coming from the CoolVox sound system and status LED is not lit. Power cord not plugged into wall outlet Check electrical supply. Plug the power cord’s 2-pronged plug into a wall outlet. The Status LED (A) will glow amber if power is present. Switch controlling wall outlet is turned off Move wall outlet switch to ON position Fuse blown or circuit breaker trippedReset a tripped circuit breaker. Replace any blown fuses. NOTE: If problems continue, contact an electrician. Mobile Device is not Bluetooth pairedPair the BlueTooth source. See “Set Up and Operation.” The CoolVox™ sound system is available for pairing when the Status LED (A) flashes blue. Pairing is accomplished when the Status LED glows constant blue. Mobile Device is not sending audioConsult Users Manual for phone or tablet PROBLEMPOSSIBLE CAUSES SOLUTIONS Bluetooth Not Paired Mobile device does not list CoolVox™ sound system as a Bluetooth music source. There is no power to CoolVox™ sound system. Check electrical supply. Plug the power cord’s 2-pronged plug into a wall outlet. The Status LED (A) will glow (amber or blue) if power is present. Mobile device is not Bluetooth compatible Obtain audio source material from a Bluetooth compatible device Mobile device’s Bluetooth feature is not enabled Enable Bluetooth feature using menus on mobile device. NOTE:Many mobile devices ship with the Bluetooth feature disab…

Text truncated - open the document above for the full version.

Page 1 of 4 External PHOTO: Model: CoolVox Page 2 of 4 Page 3 of 4 Page 4 of 4

LISTED AUDIO APPARATUS 20BZ E249306 Refrigerator Bluetooth Speaker Model:CoolVox FCC ID:APICOOLVOX IC:6132A-COOLVOX China. This device complies with Part 15 of the FCC rules and Industry Canada license- exempt RSS-GEN.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 100-240V~50/60Hz 45W 74*90 v

Page 1 of 1 External PHOTO: Model: CoolVox Attach label here

Page 1 of 5 Internal PHOTO: Model:CoolVox Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5

ITL Page 1 of 91 Report No.: 14016418 TEST REPORT Applicant: Harman International Industries, Incorporated Address of Applicant: 8500 Balboa Blvd, Northridge, CA 91329, United States Manufacturer: Harman International Industries, Incorporated Address of Manufacturer: 8500 Balboa Blvd, Northridge, CA 91329, United States Product name: Refrigerator Bluetooth Speaker Model: CoolVox Rating(s): AC 100-240V, 50/60Hz, 45W Trademark: Harman/Kardon Standards: FCC Part 15.247 :2013 RSS-210 issue 8 FCC ID: APICOOLVOX IC ID: 6132A-COOLVOX Data of Receipt: 2014-01-23 Date of Test: 2014-01-23~2014-02-20 Date of Issue: 2014-02-24 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Feb.24.2014 Jumy Qiu Feb.24.2014 Pauler Li Project Engineer Project Manager Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 91 Report No.: 14016418 Possible test case verdicts: test case does not apply to the test object ..: N/A test object does meet the requirement ........: P (Pass) test object does not meet the requirement ..: F (Fail) Testing Laboratory information: Testing Laboratory Name .......... : I-Test Laboratory Address : 1-2 floor, South Block, Building A2 , No 3 Keyan Lu, Science City, Guangzhou, Guangdong Province, P.R. China Testing location : Same as above Tel : 0086-20-32209330 Fax : 0086-20-62824387 E-mail : [email protected] General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: / ITL Page 3 of 91 Report No.: 14016418 1 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PA SS Occupied Bandwidth (99% and -20dB) FCC PART 15 C section 15.247 (a)(1); RSS 210 A8.1 (1) ANSI C63.10: Clause 6.9 & DA 00-705 PA SS Carrier Frequencies Separated FCC PART 15 C section 15.247(a)(1); RSS 210 A8.1 (1) DA 00-705 PA SS Hopping Channel Number FCC PART 15 C section 15.247(a)(1)(iii) RSS 210A8.1 (4) DA 00-705 PA SS Dwell Time FCC PART 15 C section 15.247(a)(1)(iii); RSS 210 A8.1 (4) DA 00-705 PA SS Maximum Peak Output Powe r FCC PART 15 C section 15.247(b)(1); RSS 210 A8.4 (2) ANSI C63.10: Clause 6.10 & DA 00-705 PA SS Conducted Spurious Emission (30 MHz to 25 GHz) FCC PART 15 C section 15.247(d); RSS 210 A8.5 ANSI C63.10: Clause 6.7 & DA 00-705 PA SS Radiated Spurious Emission (9 kHz to 25 GHz) FCC PART 15 C section 15.247(d); RSS 210 A8.5 ANSI C63.10: Clause 6.4, 6.5 and 6.6 & DA 00-705 PA SS Band Edges Measurement FCC PART 15 C section 15.247 (d) &15.205 ANSI C63.10: Clause 6.9 & DA 00-705 PA SS Conducted Emissions at Mains Terminals FCC PART 15 C section 15.207; RSS GEN Table 2 ANSI C63.10: Clause 6.2 & DA 00-705 PA SS Remark: N/A: not applicable. Refer to the relative section for the details. EUT: In this whole report EUT means Equipment Under Test. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radio Frequency. ANSI C63.10: the detail version is ANSI C63.10:2009 in the whole report. DA 00-705: “Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems” ITL Page 4 of 91 Report No.: 14016418 2 Contents Page TEST REPORT....................................................................................................................................................................... 1 1 TEST SUMMARY......................................................................................................................................................... 3 2 CONTENTS................................................................................................................................................................... 4 3 GENERAL INFORMATION........................................................................................................................................ 5 3.1 CLIENT INFORMATION............................................................................................................................................ 5 3.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 3.3 DETAILS OF E.U.T................................................................................................................................................. 5 3.4 DESCRIPTION OF SUPPORT UNITS........................................................................................................................ 5 3.5 TEST LOCATION..................................................................................................................................................... 6 3.6 DEVIATION FROM STANDARDS.............................................................................................................................. 6 3.7 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................................. 6 3.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER....................................................................................... 6 3.9 TEST FACILITY....................................................................................................................................................... 6 3.10 MEASUREMENT UNCERTAINTY.................................…

Text truncated - open the document above for the full version.

Page 1 of 2 TEST PHOTO: Model: CoolVox Page 2 of 2