APIJBLFREE2BLUETOOTH HEADSET

TECH SPEC WHAT’S IN THE BOX quick start guide how to wear First time use Charging led behaviors DUAL CONNECT Manual Controls power onRECONNECTING LEFT & RIGHTpower on & connect to device + 5S ×3 2S RLR power off BUTTON COMMAND 1. Stereo Mode 2. Mono Mode R ×2 ×1 ×2 ×1 ×1 Siri ® Google Assistant Bixby Seamless automatic switch power off power on & connect 3S ×1 3S ×2 ×1 ×1 Siri ® Google Assistant Bixby 3S SML S / M / L R L/R LL/R 5S L/R Choose "JBL Free ii" to connect ON • now JBL FREE II Tap to pair. Device will be tied to Your Google Account SettingsBluetooth Bluetooth DEVICES Now Discoverable Connected JBL FREE II OTHERSAndroid 6.0+ LRL/R Stereo Mode Mono Mode E E R F I I Model: FREE II Driver size: 5.6 mm / 0.22” Dynamic driver Power supply: 5 V 1 A Weight: 61.6 g/0.135 lbs Earpiece: 4.8 g/0.011 lbs/pc (9.6 g /0.021 lbs combined) Charging case: 52 g/0.114 lbs Headset battery type: Lithium-ion Battery (55 mA / 3.7 V) Charging case battery type: Lithium-ion Battery (650 mA / 3.8 V) Charging time: < 2 hrs from empty Music playtime with BT on: up to 6 hrs Frequency response: 20 Hz – 20 kHz Impedance: 16 ohm Sensitivity: 100 dB SPL@1 kHz / 1 mW Maximum SPL: 95 dB Microphone sensitivity: - 38 dBV@1 kHz / Pa Bluetooth version: 5.0 Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP 1.7 Bluetooth transmitter frequency range: 2.4 GHz - 2.48 GHz Bluetooth transmitter power: < 12 dBm Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK Maximum operation temperature: 45 °C HP_JBL_Free II_QSG_SOP_V4.indd 1HP_JBL_Free II_QSG_SOP_V4.indd 17/31/2020 5:30:42 PM7/31/2020 5:30:42 PM HP_JBL_FREE II_QSG_SOP_V4 TEKNISKE SPECIFIKATIONER ESPECIFICACIONES TÉCNICAS MŰSZAKI SPECIFIKÁCIÓ TECHNISCHE DATEN TEKNISET TIEDOT SPECIFICHE TECNICHE HVAD ER DER I ÆSKEN SÅDAN BÆRES DE BRUG FØRSTE GANG TÆND OG FORBIND ANDRE ANDROID 6.0+ VÆLG “JBL FREE II” FOR AT FORBINDE DUAL CONNECT STEREOTILSTAND MONOTILSTAND SLUK MANUEL STYRING TÆND OG OPRET FORBINDELSE TIL ENHEDEN TILSLUT VENSTRE OG HØJRE IGEN TÆND SLUK STYRING MED KNAP 1. STEREOTILSTAND 2. MONOTILSTAND NEMT AUTOMATISK SKIFTE OPLADER LED-SIGNALER TÆNDT BLUETOOTH OPRETTER FORBINDELSE BLUETOOTH FORBUNDET LAVT BATTERI OPLADER CONTENIDO DE LA CAJA CÓMO SE LLEVAN USO POR PRIMERA VEZ ENCENDER Y CONECTAR OTROS ANDROID 6.0+ SELECCIONA “JBL FREE II” PARA CONECTAR CONEXIÓN DUAL MODO ESTÉREO MODO MONO APAGAR CONTROLES MANUALES ENCENDER Y CONECTAR DISPOSITIVO RECONECTAR IZQUIERDO Y DERECHO ENCENDER APAGAR COMANDOS DE LOS BOTONES 1. MODO ESTÉREO 2. MODO MONO ENCENDIDO Y APAGADO AUTOMÁTICO TOTALMENTE INTEGRADO CARGA COMPORTAMIENTOS DE LOS LED ENCENDER CONECTANDO BT BLUETOOTH CONECTADO BATERÍA BAJA CARGA A DOBOZ TARTALMA A HASZNÁLAT MÓDJA ELSŐ HASZNÁLAT BEKAPCSOLÁS ÉS CSATLAKOZÁS EGYEBEK ANDROID 6.0+ A CSATLAKOZÁSHOZ VÁLASSZA A „JBL FREE II” LEHETŐSÉGET KETTŐS CSATLAKOZÁS SZTEREÓ ÜZEMMÓD | MONÓ ÜZEMMÓD KIKAPCSOLÁS KÉZI VEZÉRLŐK BEKAPCSOLÁS ÉS CSATLAKOZTATÁS AZ ESZKÖZHÖZ A BAL ÉS JOBB OLDAL ÚJRA- CSATLAKOZTATÁSA BEKAPCSOL KIKAPCSOLÁS GOMB PARANCS 1. SZTEREÓ MÓD 2. MONÓ MÓD ÉSZREVÉTLEN AUTOMATIKUS ÁTVÁLTÁS TÖLTÉS LED TULAJDONSÁGAI BEKAPCSOL BLUETOOTH CSATLAKOZIK BLUETOOTH CSATLAKOZTATVA ALACSONY AKKUMULÁTOR TÖLTÉS DA ES HU NO SV ZH-CN JP VERPACKUNGSINHALT TRAGEMÖGLICHKEITEN ERSTMALIGE VERWENDUNG EINSCHALTEN UND VERBINDEN WEITERE ANDROID 6.0+ “JBL FREE II” ZUM VERBINDEN WÄHLEN DUAL CONNECT STEREO-MODUS MONO-MODUS AUSSCHALTEN MANUELLE BEDIENELEMENTE EINSCHALTEN UND VERBINDEN MIT GERÄT LINKS UND RECHTS WIEDER VERBINDEN EINSCHALTEN AUSSCHALTEN TASTENBEFEHL 1. STEREO-MODUS 2. MONO-MODUS NAHTLOSER AUTOMATISCHER WECHSEL WIRD AUFGELADEN LED-VERHALTEN EINSCHALTEN BT WIRD VERBUNDEN BT VERBUNDEN SCHWACHER AKKU WIRD AUFGELADEN PAKKAUKSEN SISÄLTÖ KÄYTTÖOHJEET ENSIMMÄINEN KÄYTTÖKERTA VIRRAN KYTKEMINEN JA YHDISTÄMINEN MUUTA ANDROID 6.0+ VALITSE ”JBL FREE II” YHDISTÄÄKSESI KAKSOILIITÄNTÄ STEREOTILA MONOTILA VIRTA POIS MANUAALISET SÄÄTIMET & PAINIKKEET VIRRANKYTKENTÄ & YHDISTÄMINEN LAITTEESEEN YHTEYDEN MUODOSTUS UUDELLEEN VASEN / OIKEA VIRTA PÄÄLLÄ | VIRTA POIS PAINIKEKOMENTO 1. STEREOTILA 2. MONOTILA SAUMATON AUTOMAATTINEN KYTKIN LATAUTUU LED-MERKKIVALON TOIMINNOT VIRTA PÄÄLLÄ BT YHDISTÄÄ BT YHDISTETTY AKKU VÄHISSÄ LATAUTUU CONTENUTO DELLA CONFEZIONE COME INDOSSARLI AL PRIMO UTILIZZO ACCENSIONE E COLLEGAMENTO ALTRI ANDROID 6.0+ SCEGLIERE “JBL FREE II” PER EFFETTUARE IL COLLEGAMENTO DUAL CONNECT MODALITÀ STEREO | MODALITÀ MONO SPEGNIMENTO COMANDI MANUALI ACCENSIONE E COLLEGAMENTO AL DISPOSITIVO RICONNESSIONE SINISTRO E DESTRO ACCENSIONE SPEGNIMENTO PULSANTE COMANDO 1. MODALITÀ STEREO 2. MODALITÀ MONO PASSAGGIO AUTOMATICO SENZA INTERRUZIONI IN CARICA COMPORTAMENTO DEI LED ACCENSIONE COLLEGAMENTO BT BT COLLEGATO BATTERIA SCARICA IN CARICA DE FI IT PL TR ZH-TW KO အသေး�း�စိိတ််အသေးချျက််အသေးလက််များျ�� �များ�်ဒယ််- Free II Driver size:5.6 mm / 0.22” Dynamic driver Power supply:5 V 1 A အသေး�လ�ချျိ န််- ၆၁.၆ ဂရမ််/၀.၁၃၅ ပေါ�ါင်် န်��ကြက်ပ််:၄.၈ ဂရမ််/၀.၀၁ပေါ�ါင််/တစ််ခုု (၉.၆ ဂရမ်် /၀.၀၂၁ ပေါ�ါင််/တစ််စ်ံု) အသေး��းွင်း်�ဗူးး� :၅၂ဂရမ််/၀.၁၁ပေါ�ါင်် Headset battery type:Lithium-ion Battery (55 mA / 3.7 V) Charging case battery type:Lithium-ion Battery (650 mA / 3.8 V) Charging time:< 2 hrs from empty Music playtime with BT on:up to 6 hrs Frequency response:20 Hz – 20 kHz Impedance:16 ohm Sensitivity:100 dB SPL@1 kHz / 1 mW Maximum SPL:95 dB Microphone sensitivity:- 38 dBV@1 kHz / Pa Bluetooth version:5.0 Bluetooth profile version:A2DP 1.3, AVRCP 1.5, HFP 1.7 Bluetooth transmitter frequency range:2.4 GHz - 2.48 GHz Bluetooth transmitter power:< 12 dBm Bluetooth transmitter modulation:GFSK, π/-4DQPSK, 8DPSK Maximum operation temperature:45 °C ဗူးး�အသေးတ်ွင်း်� ပ်ါဝင်း်းည့်််ပ်စိစည့််�များျ�� အသေးးး��ပြုပ်ုန်ည့််� ပ်ထများဆုံးး��အသေးကြိက်ိများ် အသေးးး��ပြုပ်ုပြုချင်း်� ပ်ါဝါဖွွင်း််ပြုချင်း်�နှှင်း်် ချျိတ််ဆုံးက််ပြုချင်း်� အခြားခုး�ကိိ ရိယားမ်�း� ANDROID 6.0+ JBL FREE II ကိို ခု�ိတ်ဆကိ်ရန်် ပေါရး�ခု�ယာ်�ါ နှှစိ်များျို�ချျိ တ််ပြုချင်း်� စ်တီ ရီ ယာိုမ်ုဒ်် | မ်ို နိုိုမ်ုဒ်် ပ်ါဝါပ်ိတ််ပြုချင်း်� ထိန််�ချျုပ်…

Text truncated - open the document above for the full version.

and FCC limits may The equipment et États-Unis

Sample Agency Request Letter QF094234 Page 1 of 1 Revision 0 Authority to Act as Agent Date: 2020/8/03 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Harman International Industries, Inc. / 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2021/8/03 By : Tim Song (Signature) (Print Name) Title : Manager, Compliance Telephone : 818-895-8173 On behalf of : Harman International Industries, Inc (Company Name)

{This letter must be prepared on applicant/manufacturer letterhead} Confidentiality Letter Date: 2020/08/03 Subject: Confidentiality Request for FCC ID: APIJBLFREE2 and IC ID: 6132A-JBLFREE2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual Harman International Industries, Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: Tim Song (Signature/Title) (Print name)

Harman International Industries, Inc. Declaration of difference August 6, 2020 Date: The product: BLUETOOTH HEADSET Model No.: FREEII FCC ID: APIJBLFREE2 IC ID: 6132A-JBLFREE2 Dear Examiner, There are left and right headset of products in this report, the product software and hardware versions of the products and antenna type and RF module are the same. Schematic is same，only PCB layout is different in the left headset and right headset。 I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Signature： Sincerely.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 115 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 116 of 128 16. Photos of the EUT Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 117 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 118 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 119 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 120 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 121 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 122 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 123 of 128 BT Antenna

BLUETOOTH HEADSET/ Пользовательские наушники/蓝牙耳机 MODEL/型号: FREEII HVIN: FREEII Battery Capacity: 3.8V, 650mAh, 2.47Wh INPUT/输入: 5V 1A OUTPUT/输出: 5V 70mA*2 Made in China/Сделано в Китае/中国制造 Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES FCC ID: APIJBLFREE2 IC: 6132A-JBLFREE2 CMIIT ID: XXXXXXXXX A/S : 02-553-3494 XXXXX/SDPPI/XXXX/XXXX JBL FREE II _ Compliance content_V3 Gemma Chen_20200720 7mm 5mm R-R-SEC-JBLFREEII 5mm 左耳:CCXXXXXXXXXXXX 右耳:CCXXXXXXXXXXXX XXX-XXXXXX XXXXX-XX-XXXXX 輸入元: ハーマンインタ ーナショナル株式会社

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 120 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 121 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 122 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 123 of 128 BT Antenna Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 124 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 125 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 126 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 127 of 128 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 128 of 128 END OF REPORT

AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Page 1 of 31 SAR TEST REPORT for Harman International Industries, Inc. BLUETOOTH HEADSET Model No.: FREE II FCC ID: APIJBLFREE2 IC: 6132A-JBLFREE2 The MAX SAR(1g) Head SAR 0.673W/Kg Prepared for : Harman International Industries, Inc. 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Kefeng Road, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26639496 Fax: (0755) 26632877 Report Number ： ACS-SF20020 Date of Test ： Jul.29, 2020 Date of Report ： Aug.07, 2020 AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Page 2 of 31 TABLE OF CONTENTS Description Page Test Report Verification 3 1. GENERAL INFORMATION ...................................................................................................... 4 1.1. Description of Equipment Under Test ............................................................................................... 4 1.2. Feature of Equipment Under Test ..................................................................................................... 5 2. GENERAL DESCRIPTION ........................................................................................................ 6 2.1. Product Description For EUT ............................................................................................................ 6 2.2. Applied Standards ............................................................................................................................. 6 2.3. Device Category and SAR Limits ..................................................................................................... 6 2.4. Test Conditions .................................................................................................................................. 6 2.5. Exposure Positions Consideration ..................................................................................................... 7 2.6. Standalone SAR Test Exclusion Considerations ............................................................................... 8 2.7. EUT Configuration and operation conditions for test. .................................................................... 10 2.8. Test Equipments .............................................................................................................................. 10 2.9. Laboratory Environment ................................................................................................................. 11 2.10. Measurement Uncertainty ............................................................................................................... 11 3. MEASURE PROCEDURES ...................................................................................................... 14 3.1. General description of test procedures ............................................................................................ 14 4. SAR MEASUREMENTS SYSTEM .......................................................................................... 15 4.1. SAR Measurement Set-up ............................................................................................................... 15 4.2. ELI Phantom .................................................................................................................................... 16 4.3. Device Holder for SAM Twin Phantom .......................................................................................... 17 4.4. DASY5 E-field Probe System ......................................................................................................... 18 4.5. E-field Probe Calibration ................................................................................................................. 19 4.6. Scanning procedure ......................................................................................................................... 20 5. DATA STORAGE AND EVALUATION ................................................................................. 22 5.1. Data Storage .................................................................................................................................... 22 5.2. Data Evaluation by SEMCAD ......................................................................................................... 22 6. SYSTEM CHECK ...................................................................................................................... 24 7. TEST RESULTS ......................................................................................................................... 26 7.1. Output power ................................................................................................................................... 26 7.2. System Check for Head Tissue simulating liquid ........................................................................... 28 7.3. Test Results ..................................................................................................................................... 29 ANNEX A: SYSTEM CHECK RESULTS ANNEX B: TEST PLOTS ANNEX C: DASY CABLIBRATION CERTIFICATE ANNEX D: TEST SETUP PHOTOS AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Page 4 of 31 1. GENERAL INFORMATION 1.1. Description of Equipment Under Test Applicant Harman International Industries, Inc. 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES Manufacturer Harman International Industries, Inc. 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES Product BLUETOOTH HEADSET Model No. FREE II FCC ID APIJBLFREE2 IC 6132A-JBLFREE2 Sample Type Prototype production Date of Receipt Jul.29, 2020 Date of Test Jul.29, 2020 AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Page 5 of 31 1.2. Featu…

Text truncated - open the document above for the full version.

AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF20020 Annex C

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 1 of 113 FCC AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : Harman International Industries, Inc. Address : 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES Equipment under Test : BLUETOOTH HEADSET Model No. : FREEII Trade Mark : JBL FCC ID : APIJBLFREE2 IC : 6132A-JBLFREE2 Manufacturer : Harman International Industries, Inc. Address : 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES ■Report No.: DDT-R20053003-1E4 ■Issued Date: Jul. 27, 2020 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 2 of 113 Table of Contents Test report declares.......................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Deviations of test standard............................................................................................. 8 2.6. Test environment conditions .......................................................................................... 9 2.7. Test laboratory ............................................................................................................... 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. Maximum Peak Output Power ..................................................................................... 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 20 dB Bandwidth and 99% Bandwidth ......................................................................... 20 5.1. Block diagram of test setup .......................................................................................... 20 5.2. Limits ............................................................................................................................ 20 5.3. Test procedure ............................................................................................................. 20 5.4. Test result ..................................................................................................................... 20 5.5. Original test data .......................................................................................................... 21 6. Carrier Frequency Separation ...................................................................................... 35 6.1. Block diagram of test setup .......................................................................................... 35 6.2. Limits ............................................................................................................................ 35 6.3. Test procedure ............................................................................................................. 35 6.4. Test result ..................................................................................................................... 35 6.5. Original test data .......................................................................................................... 36 7. Number of Hopping Channel ....................................................................................... 39 7.1. Block diagram of test setup .......................................................................................... 39 7.2. Limits ............................................................................................................................ 39 7.3. Test procedure ............................................................................................................. 39 7.4. Test result ..................................................................................................................... 39 7.5. Original test data .......................................................................................................... 40 8. Dwell Time .................................................................................................................... 43 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 3 of 113 8.1. Block diagram of test setup .......................................................................................... 43 8.2. Limits ...............................................................…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 41 of 113 A Offset 9.2 dB LVL Att 40 dB*Ref 30 dBm Start2.4 GHzStop2.4835 GHz8.35 MHz/ 3DB RBW 100 kHz SWT 10 ms * VBW 300 kHz* 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 30 Date: 2.JUL.2020 15:01:25 Right side: DH5_Ant1_Hop A Offset 9.2 dB LVL Att 20 dB*Ref 30 dBm Start2.4 GHzStop2.4835 GHz8.35 MHz/ 3DB RBW 100 kHz SWT 10 ms * VBW 300 kHz* 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 30 Date: 3.JUL.2020 14:55:43 2DH5_Ant1_Hop Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 42 of 113 A Offset 9.2 dB LVL Att 20 dB*Ref 30 dBm Start2.4 GHzStop2.4835 GHz8.35 MHz/ 3DB RBW 100 kHz SWT 10 ms * VBW 300 kHz* 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 30 Date: 3.JUL.2020 15:01:04 3DH5_Ant1_Hop A Offset 9.2 dB LVL Att 20 dB*Ref 30 dBm Start2.4 GHzStop2.4835 GHz8.35 MHz/ 3DB RBW 100 kHz SWT 10 ms * VBW 300 kHz* 1 PK VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 30 Date: 19.JUL.2020 19:38:06 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 43 of 113 8. Dwell Time 8.1. Block diagram of test setup Same as section 4.1 8.2. Limits The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. 8.3. Test procedure (1) Connect EUT’s antenna output to spectrum analyzer by RF cable. (2) The test period: T= 0.4 Second/Channel x 79 Channel = 31.6 s (3) Measure the hopping number and on time of each pulse with spectrum analyzer in zero span set, and calculate dwell time with formula Dwell time = total hops *pulse’s on time. 8.4. Test result Left side: Mode Dwell time (s) Pulse’s on time (ms) Total hops Limit Verdict DH1 0.062 0.40 154 <400ms Pass DH3 0.185 1.66 112 <400ms Pass DH5 0.224 2.90 77 <400ms Pass 2DH1 0.069 0.41 169 <400ms Pass 2DH3 0.159 1.66 96 <400ms Pass 2DH5 0.224 2.91 77 <400ms Pass 3DH1 0.062 0.41 151 <400ms Pass 3DH3 0.186 1.66 112 <400ms Pass 3DH5 0.236 2.91 81 <400ms Pass Note: Dwell time = total hops *pulse’s on time. Right side: Mode Dwell time (s) Pulse’s on time (ms) Total hops Limit Verdict DH1 0.061 0.40 153 <400ms Pass DH3 0.187 1.66 113 <400ms Pass DH5 0.238 2.90 82 <400ms Pass 2DH1 0.068 0.41 167 <400ms Pass 2DH3 0.191 1.66 115 <400ms Pass 2DH5 0.245 2.91 84 <400ms Pass 3DH1 0.069 0.41 168 <400ms Pass Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 44 of 113 3DH3 0.159 1.66 96 <400ms Pass 3DH5 0.224 2.91 77 <400ms Pass Note: Dwell time = total hops *pulse’s on time. 8.5. Original test data Left side: DH1_Ant1_Hop A Att 40 dB*Ref 30 dBm 3DB RBW 1 MHz VBW 3 MHz* CLRWR SGL TRG Center 2.441 GHz1 ms/ SWT 10 ms *1 PK -70 -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -21.36 dBm -26.250000 μs 2 Delta 2 [T1 ] 8.96 dB 400.000000 μs TRG -2.9 dBm Date: 2.JUL.2020 14:42:50 A Att 40 dB*Ref 30 dBm CLRWR SGL *1 PK 3DB RBW 500 kHz *VBW 3 MHz TRG Center 2.441 GHz3.16 s/ SWT 31.6 s -70 -60 -50 -40 -30 -20 -10 0 10 20 30 TRG -5.9 dBm Date: 2.JUL.2020 14:43:25 DH3_Ant1_Hop Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 45 of 113 A Att 40 dB*Ref 30 dBm 3DB RBW 1 MHz VBW 3 MHz* CLRWR SGL TRG Center 2.441 GHz1 ms/ SWT 10 ms *1 PK -70 -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -22.16 dBm -7.500000 μs 2 Delta 2 [T1 ] 12.16 dB 1.655000 ms TRG -6.5 dBm Date: 2.JUL.2020 14:44:45 A Att 40 dB*Ref 30 dBm CLRWR SGL *1 PK 3DB RBW 500 kHz *VBW 3 MHz TRG Center 2.441 GHz3.16 s/ SWT 31.6 s -70 -60 -50 -40 -30 -20 -10 0 10 20 30 TRG -6.5 dBm Date: 2.JUL.2020 14:45:20 DH5_Ant1_Hop A Att 40 dB*Ref 30 dBm 3DB RBW 1 MHz VBW 3 MHz* CLRWR SGL TRG Center 2.441 GHz1 ms/ SWT 10 ms *1 PK -70 -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -33.08 dBm -60.000000 μs 2 Delta 2 [T1 ] 16.38 dB 2.903750 ms TRG -10.6 dBm Date: 2.JUL.2020 14:41:25 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20053003-1E4 Page 46 of 113 A Att 40 dB*Ref 30 dBm CLRWR SGL *1 PK 3DB RBW 500 kHz *VBW 3 MHz TRG Center 2.441 GHz3.16 s/ SWT 31.6 s -70 -60 -50 -40 -30 -20 -10 0 10 20 30 TRG -13.6 dBm Date: 2.JUL.2020 14:42:00 2DH1_Ant1_Hop A Att 40 dB*Ref 30 dBm 3DB RBW 1 MHz VBW 3 MHz* CLRWR SGL TRG Center 2.441 GHz1 ms/ SWT 1…

Text truncated - open the document above for the full version.