APIJBLLEGENDHUHEAD UNIT

Phone Setup(Before you begin): 1.Apple CarPlay ® features may operate differently than on your Apple iPhone ®. 2.Message and data charges may apply when using Apple CarPlay. Please check with your mobile carrier. 3.Apple CarPlay ® relies on the performance of your phone. If you experience performance issues: Before using Bluetooth Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated. This is also referred to as "pairing" a device. Pairing a New Device After enabling the BT pairing function, other devices can search for the unit for 3 minutes, the unit can search for other devices constantly. Connection The head unit will automatically connect to the last connected device when the connection feature is set to Auto Connect On. If the connection feature is set to Auto Connect Off, the head unit will not automatically connect to any device. Bluetooth Phone From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is connected. Dialing a Number Press to display keypad and dial a number. Making and Ending a Call Press to connect a call, and press to end a call. Transferring Audio Press - to transfer sound between the head unit and mobile phone. Streaming Audio Press to play or pause the music. Press to skip to the previous track. Press to advance to the next track. Wiring Diagram - Inputs/Outputs Main Menu Tuner Operation Bluetooth Operation USB Operation General Operation Audio Operation CarPlay Operation Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector. In main menu, press the desired icon to enter the corresponding mode: Radio/Bluetooth/Apple CarPlay/Android Auto/USB/AV IN/Settings. From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the bottom of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen. Press the Settings icon on the main menu screen to adjust Fader and Balance controls, Equalizer (10- Band Tone Control and 10 Presets EQ Settings). Preset Stations Seek Tune Down Seek Tune Up FM/AM ( FM1\FM2\FM3\AM1\AM2) Local/Distance Main Menu Preset Auto Store Presets/Preset Scan Frequency Scale RDS Keypad Equalizer Volume adjustment 1 2 3 4 5 6 7 8 9 10 1 678911101213 3 54 2 Control Locations Multimedia Receiver with Wired CarPlay™ and Android Auto™ featuring a 9" digital TFT Display QUICK START GUIDE The radio display features the following functions and displays: 1 2 3 4 5 6 Long press: in on mode, power off Short press: In on mode, Mute on/off; In off mode, power on; Reset Home Voice Activation Button VOL+ VOL- • Lightning Data Cable • IPhone ® 5s or later • IPhone with iOS 7.1 or later • Data Plan • Maybe need to set the permissions for the carplay app on your phone, open Screen Time-->contents -->Allowed app. Requirements • Close all apps and then restart them again. Disconnect and then reconnect your phone using the Apple Lightning cable that was provided with your phone is recommended. • When Apple CarPlay ® is active, your voice recognition system is disabled and you will be using Siri ® to make your requests. • On your phone, go to Settings > General > Restrictions > CarPlay to allow CarPlay access. • On your phone, go to Settings > General > Siri and ensure Siri is turned ON. • On your phone, go to Settings-->General-->Carplay can adjust the position of the icon displayed on the car, with or without. The option with “×” can be deleted, and the search can be done by clicking the “+” sign below. Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by: • Touching and holding the Home icon on the CarPlay screen or • Pressing the Voice button on panel or Steering Wheel, then say any of the following commands: • “Text <Name> ‘Call you later’” to send a text message. • “Read text messages” to read available text message. • “Call <Name>” to make a phone call. • “Find <POI/Destination>” to locate a POI/Destination. Connect your iPhone to the USB port then touch OK on your Phone when the pop-up message appears to allow interface accessories. The Apple CarPlay icon will now be enabled on the main menu. • Press the CarPlay button on the Main menu to enter the operation interface. • Enjoy the Carplay function. 2 1 3 4 5 6 Voice Command Button NOTE: Ensure Siri feature is set to ON in your phone (Go to Settings > General > Siri). From the main menu, touch the USB icon on the main screen. Progress bar Previous Track Play/Pause Next Track Random Repeat Main Menu Playlist Audio Source Video Picture Keypad Equalizer Volume adjustment 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1234 6 8791011121314 5 G REEN/BLACK G REEN W HITE/BLACK W HITE P URPLE / BLACK P URPLE G RAY / BLACK G RAY B LUE B LUE / WHITE G REEN/WHITE P INK R ED O RANGE B LACK Y ELLOW B LUE / BLACK O RANGE/BLACK B ROWN B ROWN/BLACK MCU-TX(CAN) REAR R (+) MCU-RX(CAN) WHEEL KEY2 B+ GNDREAR R (-) WHEEL KEY1 ILLUMI ACC FRONT L (+) PARKING REVERSE P.CNTR P.ANT FRONT R (+) FRONT R (-) FRONT L (-) REAR L (+) REAR L (-) CarPlay and Android Auto GRAY BLACK YELLOW R ED W HITE RED W HITE YELLOW R ED YELLOW W HITE GND R CAMERA
12V AV
IN
R AV
IN
L VIDEO
IN R CAMERA
IN LINE
OUT
FRONT
L LINE
OUT
FRONT
R LINE
OUT
REAR
L LINE
OUT
REAR
R
VIDEO
OUT
1 BLACKBLACKBLACKBLACKBLACKBLACKBLACK GRAY R ED WHITE/BLACK WHITE HEATUINT TX HEAYUINT RX RED POWER
12V 18PIN 20PIN GPS 11 12 13 CA_JBL Legend Headunit_OM_GLOBAL_SOP_10.indd 1CA_JBL Legend Headunit_OM_GLOBAL_SOP_10.indd 18/29/2022 5:39:56 PM8/29/2022 5:39:56 PM SPECIFICATIONS Tuner bandsAM/FM AM Band for USA535 -1705 KHz (10 kHz STEP) AM Band for Europe531 - 1602 kHz …

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Harman International Industries, Inc Address 8500 Balboa Boulevard,Northridge,California 91329,United States Grantee Code API FCC ID APIJBLLEGENDHU Authorized Contact Name Terry Shi Contact Email [email protected] Contact Phone 86-75523189391 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2022-08-01 Print Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Harman International Industries, Inc Date: 2022-08-01 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:APIJBLLEGENDHU To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Harman International Industries, Inc. This authorization is valid until further written notice from the applicant. Print Name: Terry Shi Title:Prin.Engineer,Regulatory Compliance, Quality Signature: On behalf of Company: Harman International Industries, Inc Telephone: 86-75523189391 E-mail: [email protected]

Harman International Industries, Inc TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: APIJBLLEGENDHU LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Terry Shi Title:Prin.Engineer,Regulatory Compliance, Quality Signature: On behalf of Company: Harman International Industries, Inc Telephone: 86-75523189391 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 5 Appendix External Photos for GZCR2207000942AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 5 EMC-ARF-02 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 5 EMC-ARF-02 Rev 1.0

90.00 mm 2 4 . 0 0 m m 39.00 mm

90.00 mm 2 4 . 0 0 m m FCC ID: APIJBLLEGENDHU This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 5 Appendix Internal Photos for GZCR2207000942AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 5 EMC-ARF-03 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 5 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 5 EMC-ARF-03 Rev 1.0 Antenna Location: SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 5 EMC-ARF-03 Rev 1.0 Dimensional drawings of Antenna Antenna Model: CW-2.4G24B-SMAMM

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220700094202 Page: 1 of 11 FCC ID: APIJBLLEGENDHU Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2207000942AT Applicant: Harman International Industries, Inc. Address of Applicant: 8500 Balboa Boulevard, Northridge, California, 91329, United States Manufacturer: Harman International Industries, Inc. Address of Manufacturer: 8500 Balboa Boulevard, Northridge, California, 91329, United States Equipment Under Test (EUT): EUT Name: HEAD UNIT Model No.: LEGEND Trade Mark: JBL Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-07-25 Date of Evaluation: 2022-07-25 to 2022-07-28 Date of Issue: 2022-07-28 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220700094202 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2022-07-28 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220700094202 Page: 3 of 11 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 4 3.4 Test Location ............................................................................................................................... 5 3.5 Test Facility .................................................................................................................................. 5 3.6 Deviation from Standards ............................................................................................................. 6 3.7 Abnormalities from Standard Conditions ....................................................................................... 6 3.8 Blanket 1 mW Blanket Exemption ................................................................................................. 7 3.9 MPE-based Exemption ................................................................................................................. 7 3.10 SAR-based Exemption ................................................................................................................. 8 4 Measurement and Calculation ..........................................................................................................11 4.1 Maximum transmit power ............................................................................................................11 4.2 RF Exposure Calculation .............................................................................................................11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220700094202 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Powered by DC12V Cable(s): RCA cable: 15cm; Mic cable: 230cm; USB cable: 50cm Speaker out cable: 15cm Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.2 Classic Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: Dedicated antenna Antenna Gain: 2dBi 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220700094202 Page: 5 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: ● NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● CNAS (Lab Code: L0167) SGS-CSTC Standards Technical Services Co., Lt…

Text truncated - open the document above for the full version.

BT Antenna: Specification: Working Frequency: 2400-2500MHz Max. Antenna Gain: 2dBi For dimensional drawings and Antenna Model No., please refer to the GZCR2207000942AT- Appendix_InternalPhoto.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220700094201 Page: 1 of 98 FCC ID: APIJBLLEGENDHU Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2207000942AT Applicant: Harman International Industries, Inc. Address of Applicant: 8500 Balboa Boulevard, Northridge, California, 91329, United States Manufacturer: Harman International Industries, Inc. Address of Manufacturer: 8500 Balboa Boulevard, Northridge, California, 91329, United States Equipment Under Test (EUT): EUT Name: HEAD UNIT Model No.: LEGEND Trade Mark: JBL Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-07-25 Date of Test: 2022-07-25 to 2022-07-28 Date of Issue: 2022-07-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 2 of 98 Revision Record Version Chapter Date Modifier Remark 01 2022-07-28 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 3 of 98 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 4 of 98 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 9 4.7 Abnormalities from Standard Conditions ....................................................................................... 9 5 Equipment List ..................................................................................................................................10 6 Radio Spectrum Technical Requirement ..........................................................................................14 6.1 Antenna Requirement .................................................................................................................14 6.1.1 Test Requirement: ..................................................................................................................14 6.1.2 Conclusion ..............................................................................................................................14 6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence ...............15 6.2.1 Test Requirement: ..................................................................................................................15 6.2.2 Conclusion ..............................................................................................................................15 7 Radio Spectrum Matter Test Results ................................................................................................17 7.1 Conducted Peak Output Power ....................................…

Text truncated - open the document above for the full version.

EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 66 of 98 4.1.2 Test Graph GFSK_DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 67 of 98 8DPSK_3DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 68 of 98 5. Number of Hopping Frequencies 5.1 HoppNum 5.1.1 Test Result Mode TX Type Frequency (MHz) Packet Type Num of Hopping Frequencies Verdict ANT1 Limit GFSK SISO HOPP DH5 79 >=15 Pass Pi/4DQPSK SISO HOPP 2DH5 79 >=15 Pass 8DPSK SISO HOPP 3DH5 79 >=15 Pass EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 69 of 98 5.1.2 Test Graph GFSK_DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 70 of 98 8DPSK_3DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 71 of 98 6. Time of Occupancy (Dwell Time) 6.1 Ant1 6.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) Packet Type Duration of Single Pulse (ms) Observation Period (s) Num of Pulse in Observation Period Dwell Time (ms) Limit (ms) Verdict GFSK SISO HOPP DH1 0.376 31.600 320 120.320 <=400 Pass DH3 1.632 31.600 160 261.120 <=400 Pass DH5 2.892 31.600 101 292.092 <=400 Pass Pi/4DQPSKSISO HOPP 2DH1 0.384 31.600 320 122.880 <=400 Pass 2DH3 1.646 31.600 159 261.714 <=400 Pass 2DH5 2.892 31.600 97 280.524 <=400 Pass 8DPSK SISO HOPP 3DH1 0.384 31.600 320 122.880 <=400 Pass 3DH3 1.644 31.600 157 258.108 <=400 Pass 3DH5 2.888 31.600 108 311.904 <=400 Pass EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 72 of 98 6.1.2 Test Graph GFSK_DH1_HOPP_Ant1_NTNV GFSK_DH1_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 73 of 98 GFSK_DH3_HOPP_Ant1_NTNV GFSK_DH3_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 74 of 98 GFSK_DH5_HOPP_Ant1_NTNV GFSK_DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 75 of 98 Pi/4DQPSK_2DH1_HOPP_Ant1_NTNV Pi/4DQPSK_2DH1_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 76 of 98 Pi/4DQPSK_2DH3_HOPP_Ant1_NTNV Pi/4DQPSK_2DH3_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 77 of 98 Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 78 of 98 8DPSK_3DH1_HOPP_Ant1_NTNV 8DPSK_3DH1_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 79 of 98 8DPSK_3DH3_HOPP_Ant1_NTNV 8DPSK_3DH3_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 80 of 98 8DPSK_3DH5_HOPP_Ant1_NTNV 8DPSK_3DH5_HOPP_Ant1_NTNV EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 81 of 98 7. Unwanted Emissions In Non-restricted Frequency Bands 7.1 Ref 7.1.1 Test Result Mode TX Type Frequency (MHz) Packet Type ANT Level of Reference (dBm) GFSK SISO 2402 DH5 1 8.50 2441 DH5 1 8.13 2480 DH5 1 7.34 Pi/4DQPSK SISO 2402 2DH5 1 7.05 2441 2DH5 1 6.71 2480 2DH5 1 5.86 8DPSK SISO 2402 3DH5 1 7.09 2441 3DH5 1 6.71 2480 3DH5 1 5.85 EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220700094201 Page: 82 of 98 7.1.2 T…

Text truncated - open the document above for the full version.