Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Certification Designating a U.S. Agent for Service of Process Date: 07 March 2024 To:Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Section 2.911(d)(7) filing FCC ID: APILIVEBUDS3C [Harman International Industries, Inc] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. FCC US Agent from Applicant Company Company Name: Harman International Industries, Inc Contact Name: Terry Shi Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Phone No.: 818-895-8173 Email Address: [email protected] FCC FRN (optional): 0024748147 Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Email: [email protected]
Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 07 March 2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: APILIVEBUDS3C [Harman International Industries, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Tel.: +818-895-8173 Email: [email protected]
Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 07 March 2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: APILIVEBUDS3C [Harman International Industries, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality Address: 8500 Balboa Blvd, Northridge, California, 91329, United States Tel.: +818-895-8173 Email: [email protected]
Authority to Act as Agent By: Terry Shi (Print Name) Title: Prin.Engineer, Regulatory Compliance, Quality Telephone: 818-895-8173 On behalf of:Harman International Industries, Inc (Company Name) QF094234Page 1 of 1Revision 0 Date: 9 September 2023 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Harman International Industries, Inc. / 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Northridge, 91329 United States For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months
MS-0044715Page 1 of 1Revision 1 Date: 07 March 2024____ Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: APILIVEBUDS3C Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality RequestedExhibit Short Term PermanentBlock Diagrams Short Term PermanentExternal Photo Short Term PermanentInternal Photos *** Short Term PermanentOperation Description/Theory of Operation Short Term PermanentSchematics Short Term PermanentTest Setup*** Short Term PermanentTune-Up Procedure Short Term PermanentUser’s Manual*** International Industries, Inc has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:Terry S hi (Signature/Title) (Print name) Email: [email protected]
SN:XXXXXXXXXXXX Earbud: FCC ID: APILIVEBUDS3 IC:6132A-LIVEBUDS3 XXXXX/SDPPI/2023/4117 CMIIT: XXXXXXXXXXX Charging case: FCC ID: APILIVEBUDS3C IC: 6132A-LIVEBUDS3C XXXXX/SDPPI/2023/4117 CMIIT: XXXXXXXXXXX R-R-SEC-LIVEBUDS3 ANATEL: XXXXX-XX-XXXXX R36028 RoHS 左耳：XXXXXXXXXXXXXX 右耳：XXXXXXXXXXXXXX 充電盒：XXXXXXXXXXXXXX 018-XXXXXX Battery Capacity: 3.8V, 620mAh, 2.356Wh A/S: 02-553-3494
Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24ILI4 002 Auftrags-Nr.: Order no.: 168459500 Seite 1 von 29 Page 1 of 29 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-12-18 Auftraggeber: Client: Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, California, 91329, United States Prüfgegenstand: Test item: HEADSET CHARGING CASE Bezeichnung / Typ-Nr.: Identification / Type no.: LIVE BUDS 3C (Trademark: JBL) Auftrags-Inhalt: Order content: Type test Prüfgrundlage: Test specification: FCC 47 CFR § 2.1093 IEEE Std 1528-2013 RSS-102 Issue 6: December 2023 IEC/62209-1528: 2020 Published RF exposure KDB procedures Wareneingangsdatum: Date of sample receipt: 2023-12-27 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003630231-001 Prüfzeitraum: Testing period: 2023-12-27 –2024-01-23 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Harry W. C. Wu genehmigt von: authorized by: X Signed by: Alex Lan Datum: Date: 2024-03-14 Ausstellungsdatum: Issue date: 2024-03-14 Stellung / Position: Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID:APILIVEBUDS3C IC:6132A-LIVEBUDS3C, HVIN: LIVE BUDS 3C Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN24ILI4 002 Test report no.: Page 2 of 29 Seite 2 von 29 Remarks Anmerkungen 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn…
Text truncated - open the document above for the full version.
Engineering Specification 1. Test Equipment: Agilent 5071C Network Analyzer 2. Electrical Table No. Characteristics Specifications 1 Working Central Frequency 2440 MHz 2 Gain ≤1 dBi 3 V.S.W.R (in BW) ≤3.0 4 Polarization Linear 5 Impedance 50 Ω 3.VSWR RM 802,Unit 2, Bld A KEXING SCIENCE PARK,No.15,Keyuan Avenue, Central Zone, High-tech Zone, Nanshan District, Shenzhen City, 518057 Guangdong Province, China UNLESS OTHER SPECIFIED TOLERANCES ON: INPAQ TECHNOLOGY CO., LTD. X＝±0.2 X.X＝±0.2 X.XX＝±0.2 ANGLES＝±1 HOLEDIA＝±0.2 SCALE: UNIT: mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY: 牛永林 CHECKED BY: 赵付辉 DESIGNED BY: 牛永林 APPROVED BY: 赵付辉 TITLE: ENGINEERING SPECIFICATION DOCUMENT SPEC REV. NO. P1 PAGE 2 OF 2 4. Antenna Dimensions 5. Passive Test （2.4-2.48G) UNLESS OTHER SPECIFIED TOLERANCES ON: INPAQ TECHNOLOGY CO., LTD. X＝±0.2 X.X＝±0.2 X.XX＝±0.2 ANGLES＝±1 HOLEDIA＝±0.2 SCALE: UNIT: mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY: 牛永林 CHECKED BY: 赵付辉 DESIGNED BY: 牛永林 APPROVED BY: 赵付辉 TITLE: ENGINEERING SPECIFICATION DOCUMENT SPEC REV. NO. P1 PAGE 2 OF 2 6. Gain（2.4-2.48GHz） 7. 2D&3D Pattern UNLESS OTHER SPECIFIED TOLERANCES ON: INPAQ TECHNOLOGY CO., LTD. X＝±0.2 X.X＝±0.2 X.XX＝±0.2 ANGLES＝±1 HOLEDIA＝±0.2 SCALE: UNIT: mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY: 牛永林 CHECKED BY: 赵付辉 DESIGNED BY: 牛永林 APPROVED BY: 赵付辉 TITLE: ENGINEERING SPECIFICATION DOCUMENT SPEC REV. NO. P1 PAGE 2 OF 2 8. Parameters of the antenna matching networks
Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24ILI4 001 Auftrags-Nr.: Order no.: 168459500 Page 1 of 23 Seite 1 von 23 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-12-18 Auftraggeber: Client: Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, California, 91329, United States Prüfgegenstand: Test item: HEADSET CHARGING CASE Bezeichnung / Typ-Nr.: Identification / Type no.: LIVE BUDS 3C (Trademark: JBL) Auftrags-Inhalt: Order content: Type test Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 CFR47 FCC Part 15: Subpart C Section 15.207 CFR47 FCC Part 15: Subpart C Section 15.209 RSS-247-Issue 3 August 2023 RSS-Gen Issue 5 March 2019 Wareneingangsdatum: Date of sample receipt: 2023-12-27 Refer to photos document Prüfmuster-Nr.: Test sample no: A003630231-001 Prüfzeitraum: Testing period: 2023-12-27 – 2024-01-23 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Harry W. C. Wu genehmigt von: authorized by: X Signed by: Alex Lan Datum: Date: 2024-03-14 Ausstellungsdatum: Issue date: 2024-03-14 Stellung / Position: Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: APILIVEBUDS3C IC: 6132A-LIVEBUDS3C HVIN: LIVE BUDS 3C Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601-1604, 17-18/F., Tower A, Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, Guangdong, China Mail: [email protected] ∙ Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN24ILI4 001 Test report no.: Page 2 of 23 Seite 2 von 23 Remarks Anmerkungen 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen A…
Text truncated - open the document above for the full version.
8500 Balboa Blvd, Northridge · Northridge, California · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 6.90 mW |
BLUETOOTH HEADSET
Equipment Class
DTS - Digital Transmission SystemBLUETOOTH HEADSET
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterBLUETOOTH HEADSET
Equipment Class
DTS - Digital Transmission SystemBLUETOOTH HEADSET
Equipment Class
DTS - Digital Transmission SystemPORTABLE BLUETOOTH SPEAKER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter