APISB250CPOWERED SOUNDBAR SPEAKER SYSTEM

RSS standard(s). Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. AVERTISSEMENT : Ne pas ingérer BATTERIE, BURN RISQUE CHIMIQUE [La télécommande fournie avec] Ce produit contient une pile pièce / bouton. Si la pile pièce / bouton est avalé, il peut causer des brûlures internes graves en seulement 2 heures et peut conduire à la mort. Gardez piles neuves et usagées de portée des enfants. Si vous pensez que les batteries pourraient avoir été avalé ou placé à l'intérieur d'une partie du corps, consulter immédiatement un médecin.

Harman International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA DATE : 2015-7-2 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person: NameKevin Feng Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-22891499 fax:+86-0769-22895596 E-Mail [email protected] to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with: Applicant name Harman International Industries, Incorporated Address 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Yours sincerely, Signatory Name Tim Song Position Compliance Manager Company Name Harman International Industries, Incorporated Address 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Tel / Fax +86-755-8668 2338/+86-755-8636 0599 E-Mail [email protected] Harman International Industries, Inc Harman International Industries, Inc

Harman International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA DATE : 2015-7-9 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: APISB250C Product Name: POWERED SOUNDBAR SPEAKER SYSTEM Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Yours sincerely, Signatory Name Tim Song Position Compliance Manager Company Name Harman International Industries, Incorporated Address 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Tel / Fax +86-755-8668 2338/+86-755-8636 0599 E-Mail [email protected] Harman International Industries, Inc

Harman International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA DATE :2015-7-9 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: APISB250C Product Name: POWERED SOUNDBAR SPEAKER SYSTEM Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Yours sincerely, Signatory Name Tim Song Position Compliance Manager Company Name Harman International Industries, Incorporated Address 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Tel / Fax +86-755-8668 2338/+86-755-8636 0599 E-Mail [email protected] The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Harman International Industries, Inc

Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 55 of 67 14. Photos of the EUT Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 56 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 57 of 67

GLOBAL 01/02 AMERICA, EMEA, BRAZIL, ASIA ,JAPAN xxxxxxxxxx TEXT COLOUR: PANTONE COOL GREY 1C FINISHING: MATTE PRODUCT OUTLINE SCALE 1:1 XXX-XXXXXX XXXX-XX-XXXX

Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 58 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 59 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 60 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 61 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 62 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 63 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 64 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 65 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 66 of 67 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 67 of 67 END OF REPORT

Product Name Date Version V9.0 SN Manufacturers Part Number Package Qty Manufacturer Cost 1 BC57E687C-GITB-E4 LFBGA 1 2 SST39VF1601-90-4C-B3KE 48-ball FBGA 1 SST39VF1601-70-4C-B3KE 48-ball FBGA MX29LV160CBXBC-70G 48-ball FBGA S29AL016D90BFI02 48-ball FBGA S29AL016J70BFI020 48-ball FBGA 3 BL2012-05K2450 2012 1 CBA4711714002454K 2012 4 BF2012-F2R4DAATKF 2012 1 CFL4111714032454K 2012 5 C1005COG1H2R2CT 0402 2 6 C1005COG1H6R8CT 0402 1 7 C1005COG1H150DT 0402 2 8 C1005COG1H180J 0402 1 9 C1005X7R1C103ZT 0402 4 10 C1005X7R1C223ZT 0402 1 11 C1005X7R1C473ZT 0402 1 12 C1608Y5V1A225Z 0603 4 13 C2012X5R1A106Z 0805 1 14 MCR01MZSJ2R2E 0402 3 15 LQH2MCN220K02L 0806 1 16 LQP15MN3N3B02 0402 2 17 LQP15MN22NG02 0402 1 18 TN4-25886 3*2.5 1 19 7M26000056 3.2*2.5mm 20 HSX321S 3.2*2.5mm 21 PCB-BM150-V2.0 1 Resistor L1R1,R2,R3 Inductor ERS-04022R200J0 Thick Film Resistor 2R2 ±5% ECS-06032U20AZ0 ECS-0805010UBZ0 Ceramic Capacitor(X5R) 2u2 +80,-20% 6.3V C13 ECS-0402047NGK0 ECS-0402045PGJC C12 Ceramic Capacitor(COG) 18p ±5% 50V Ceramic Capacitor(X7R) 47n ±10% 50V ECS-0402022NDK0 C2,7,C9,C18C11C10C15,C16C6,C17C4,C5,C8,C14 ELS-0806022U0K0 SMD Crystal 26MHz ±10ppm Thick Film Inductor 22u ±10% Approved By EPB-BM150V2D0000 Bandpass filter F1 Ceramic Capacitor(COG) 15p ±5% 50V Ceramic Capacitor(X5R) 10u +80,-20% 6.3V C3 Prepared By PCB Bare pcb , sided 0.6mm thick FR4 EJ0-3D02D526000 Crystal EJ0-3D02D526000 SMD Crystal 26MHz ±10ppm 9pF L2, L3 EJ0-3D02D526001 SMD Crystal 26MHz ±10ppm 9pF ELS-0402022N0J0 Thick Film Inductor 22n ±5% L4 EI0-T39VF160102 Flash Memory(16MB,3V3) EI0-X29LV160CB2 Approved By ELS-040203N30F0 Thick Film Inductor 3.3n ±0.1 X1 Ceramic Capacitor(X7R) 22n ±10% 50V Flash Memory(16MB,3V3) ECS-0402010NGKX Ceramic Capacitor(COG) 6.8p ±0.25% 50V ECS-0402018PGJ0 Capacitor ECS-04022P20GCC EI0-6D90BF10202 Ceramic Capacitor(X7R) 10n ±10% 50V U2 Flash Memory(16MB,3V3) EI0-C57E687CG12 EA0-CFL41117140 Bandpass filter EI0-SST39VF1602 Flash Memory(16MB,3V3) BC05 Multimedia External SMD Balun Ceramic Capacitor(COG) 2p2 ±0.25pF 50V EA0-BF2012F2R40 EA0-CBA47117140 Integrate circuit EI0-S29AL016J02 Flash Memory(16MB,3V3) ECS-040206P8GC0 SUNITEC ENTERPRISE CO.,LTD BOM Page 1 of 1 File NO FHY-WD-08-01-048 Department Product Type Bluetooth Module BM153 Page Number 2010/5/6 Ref Part Number Description and Value R&D SMD Balun U1 T1 RF EA0-BL201205K20

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Worse case is as below: [2402 MHz 4.06dBm（2.55 mW） output power] ( 2.55mW /5mm) ·[√2.402 (GHz)]= 0.8 <3.0 for 1-g SAR Then SAR evaluation is not required

Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 1 of 52 FCC AND IC CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-22891499 Http://www.dgddt.com Applicant : Harman International Industries, Incorporated Address : 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Equipment under Test : POWERED SOUNDBAR SPEAKER SYSTEM Model No : CINEMA SB250 Trade Mark : JBL FCC ID : APISB250C IC : 6132A-SB250C Manufacturer : Harman International Industries, Incorporated Address : 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES Report No.: DDT-R15Q0611-1E4 Issued Date: July 1, 2015 Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 2 of 52 TABLE OF CONTENTS Test report declares......................................................................................................................4 1.  Summary of test results ............................................................................................................... 5  2.  General test information .............................................................................................................. 6  2.1.  Description of EUT ..................................................................................................................... 6  2.2.  Accessories of EUT ..................................................................................................................... 6  2.3.  Assistant equipment used for test ................................................................................................ 6  2.4.  Block diagram of EUT configuration for test ............................................................................. 6  2.5.  Test environment conditions ....................................................................................................... 7  2.6.  Test laboratory ............................................................................................................................. 7  2.7.  Measurement uncertainty ............................................................................................................ 7  3.Maximum Peak Output Power .................................................................................................... 8 3.1.Test equipment ............................................................................................................................ 8 3.2.Block diagram of test setup ......................................................................................................... 8 3.3.Limits .......................................................................................................................................... 8 3.4.Test Procedure ............................................................................................................................. 8 3.5.Test Result ................................................................................................................................... 9 4.20dB Bandwidth and 99% Bandwidth ...................................................................................... 10 4.1.Test equipment .......................................................................................................................... 10 4.2.Block diagram of test setup ....................................................................................................... 10 4.3.Limits ........................................................................................................................................ 10 4.4.Test Procedure ........................................................................................................................... 10 4.5. Test Result ................................................................................................................................. 11 4.6.Original test data ....................................................................................................................... 11 5.Carrier Frequency Separation .................................................................................................... 18 5.1.Test equipment .......................................................................................................................... 18 5.2.Block diagram of test setup ....................................................................................................... 18 5.3.Limits ........................................................................................................................................ 18 5.4.Test Procedure ........................................................................................................................... 18 5.5.Test Result ................................................................................................................................. 18 5.6.Original test data ....................................................................................................................... 19 6.Number Of Hopping Channel ................................................................................................... 20 6.1.Test equipment .......................................................................................................................... 20 6.2.Block diagram of test setup ....................................................................................................... 20 6.3.Limits ........................................................................................................................................ 20 6.4.Test Procedure ........................................................................................................................... 20 6.5.Test Result ......................…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 53 of 67 13. Test setup photograph Dongguan Dongdian Testing Service Co., Ltd Report No.: DDT-R15Q0611-1E4 Page 54 of 67