APIY45BTOn Ear Bluetooth Headphone

1 UNFOLD HEADBAND EARCUP FRENCH TRANSLATION COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 2 SLIDE TO ADJUST THE HEADBAND SIZE FRENCH TRANSLATION 3 POWER ON/OFF FRENCH TRANSLATION COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 4 BLUETOOTH PAIRING 1 2 2A 1A FRENCH TRANSLATION 5 NFC BLUETOOTH PAIRING NFC AREA FRENCH TRANSLATION LED BEHAVIOUR SLOW BLINKING NO DEVICE CONNECTED NORMAL BLINKING DEVICE CONNECTED FAST BLINKING PAIRING MODE SLOW BLINKING LOW BATTERY 3 4 4A 6 BUTTONS FUNCTIONS FRENCH TRANSLATION 7 PORTS FRENCH TRANSLATION 2.5MM MICROUSB CHARGING CONSTANT 1 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适 的记忆泡棉耳垫 2 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适 的记忆泡棉耳垫 2A COUSSINETS CONFORTABLES / BEQUEME POLSTER / CONFORTEVOLI COPRI / CÓMODAS ALMOHADIL- LAS / УДОБНЫЕ ПОДУШЕЧКИ / 메모리 폼 쿠션이 장착 / / 舒适的记忆 COUSSINETS CONFORTABLES / BEQUEME POLSTER / CONFORTEVOLI COPRI / CÓMODAS ALMOHADIL- LAS / УДОБНЫЕ ПОДУШЕЧКИ / 메모리 폼 쿠션이 장착 / / 舒适的记忆 3 COUSSINETS CONFORTABLES / BEQUEME POLSTER / CONFORTEVOLI COPRI / CÓMODAS ALMOHADIL- LAS / УДОБНЫЕ ПОДУШЕЧКИ / 메모리 폼 쿠션이 장착 / / 舒适的记忆 4 COUSSINETS CONFORTABLES / BEQUEME POLSTER / CONFORTEVOLI COPRI / CÓMODAS ALMOHADIL- LAS / УДОБНЫЕ ПОДУШЕЧКИ / 메모리 폼 쿠션이 장착 / / 舒适的记忆 1A COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 4A CONSTANS - CHARGING / CONSTIQUE - RECHARGE / CONFORTEVOLI - COPRI / CÓMODAS ALMOHADILLAS / УДОБНЫЕ ПОДУШЕЧКИ / 메모리 폼 - 쿠션이 장착된 / / 舒适的记忆 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 COUSSINETS CONFORTABLES EN MOUSSE À MÉMOIRE DE FORME / BEQUEME POLSTER AUS MEMORY-SCHAUM / CONFORTEVOLI COPRI- AURICOLARI IN SCHIUMA A MEMORIA DI FORMA / CÓMODAS ALMOHADILLAS DE ESPUMA CON MEMORIA / УДОБНЫЕ ПОДУШЕЧКИ ИЗ , ЗАПОМИНАЮЩИЕ ПОСЛЕДНЕЕ ПОЛОЖЕНИЕ / 메모리 폼 쿠션이 장착된 편안한 디자인 / / 舒适的记忆泡棉耳垫 Y45BT HAS DIFFERENT COLOUR BUT USE THE SAME MODEL | USB CHARGING RATING: 5V DC 0.5A | THE MAXIMUM AMBIENT TEMPERATURE SHOULD NOT EXCEED 40 O C EN • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FR • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO ES • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO PT • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO DE • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO NL • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO IT • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO NO • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FI • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECTION: 2.5MM JACK • SUPPORT: BLUETOOTH ® T V3.0, A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2 • BATTERY TYPE: RECHARGEABLE LITHIUM ION (3.7V 300MAH) FPO FPO RU • PREMIUM 40MM DYNAMIC DRIVER • FREQUENCY RESPONSE: 17-20KHZ • CONNECT…

Text truncated - open the document above for the full version.

Epd!Op/191.3546.B

External photos of Y45BT

Approved by /Date Prepared by /Date Scale Color 顏色 Color 顏色 Color 顏色 Color 顏色 Color 顏色 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 準備(日期): 批準(日期): 比例 Unit Rev. MM 單位版本 1:1 PRINTING INFORMATION 印 字 資 料 編號: No. T3430112 富士高實業有限公司 Input From 資料輸入: A PDB13-0025 T3430097-01 A 透明色 Fujikon Model No.: CTL-BT5185 From: 200-10840-002-049 Printing To: 210-10840-004-046 BOM NO.: 吳祥利 2014.05.20 限限 閱閱 1 SPEAKER COVER (L) 899-00001-184-046 Approved by /Date Prepared by /Date Scale Color 顏色 Color 顏色 Color 顏色 Color 顏色 Color 顏色 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 準備(日期): 批準(日期): 比例 Unit Rev. MM 單位版本 1:1 PRINTING INFORMATION 印 字 資 料 編號: No. T3430113 富士高實業有限公司 Input From 資料輸入: A PDB13-0025 T3430098-01 A 透明色 Fujikon Model No.: CTL-BT5185 From: 200-10840-002-049 Printing To: 210-10840-005-045 BOM NO.: 吳祥利 2014.5.20 限限 閱閱 1 SPEAKER COVER (R) 899-00001-184-046

Label location of Y45BT Label location

Internal Photos of Y45BT

Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Culture Creative Park, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 RF exposure Estimation for Y45BT 1. Introduction Y45BT is Bluetooth handset, which contain Bluetooth function inside. 2. Limit and Guidelines on Exposure to Electromagnetic Fields According to§15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 Mobile Portable RF Exposure v05r01, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 3. Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Conducted Power + tune up tolerance = 3.13mW Distance = 5 mm f = 2.402 GHz [3.13/5] * SQRT(2.402) =0.421 0.421 ≤ 3.0 Therefore, excluded from SAR testing. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Reviewed by: Prepared By: Cookies Bu/EMC Project Manager Felix Li/EMC Project Engineer Date: 2014-05-06 Date: 2014-05-06

Report Number: 68.950.14.077.01 Page 1 of 44 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park,Nantou Checkpoint Road 2, Nanshan District, Shenzhen, 518052, P.R. China FCC/IC - TEST REPORT Report Number : 68.950.14.077.01 Date of Issue: May 8, 2014 Model : Y45BT Product Type : On Ear Bluetooth Headphone Applicant : Harman International Industries,Incorporated Address : 8500 Balboa Boulevard,Northridge,CA 91329,USA Production Facility : Harman International Industries,Incorporated Address : 8500 Balboa Boulevard,Northridge,CA 91329,USA Test Result :  Positive  Negative Total pages including Appendices : 44 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.950.14.077.01 Page 2 of 44 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park,Nantou Checkpoint Road 2, Nanshan District, Shenzhen, 518052, P.R. China 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks .................................................................................................................................................................... 7 7 Test Setups ............................................................................................................................................................................. 8 8 Systems test configuration ..................................................................................................................................................... 9 9 Technical Requirement ........................................................................................................................................................ 10 9.1 Conducted Emission.................................................................................................................................................... 10 9.2 Conducted peak output power ..................................................................................................................................... 13 9.3 20 dB bandwidth and 99% Occupied Bandwidth........................................................................................................ 15 9.4 Carrier Frequency Separation...................................................................................................................................... 20 9.5 Number of hopping frequencies .................................................................................................................................. 22 9.6 Dwell Time ................................................................................................................................................................. 24 9.7 Spurious RF conducted emissions ............................................................................................................................... 29 9.8 Band edge testing ........................................................................................................................................................ 35 9.9 Spurious radiated emissions for transmitter ................................................................................................................ 40 10 Test Equipment List ............................................................................................................................................................. 43 11 System Measurement Uncertainty ....................................................................................................................................... 44 Report Number: 68.950.14.077.01 Page 3 of 44 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park,Nantou Checkpoint Road 2, Nanshan District, Shenzhen, 518052, P.R. China 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD…

Text truncated - open the document above for the full version.

Page 1 of 2 Test setup photos 1 Conducted emission Test 2 Radiated Emission Test Transmitting spurious emission (below 1GHz) Page 2 of 2 Transmitting spurious emission (Above 1GHz)