APYHRO00342Smart phone

Sharp Corporation 2-1-25, Kyutaromachi, Chuo-ku, Osaka city, 541-8522 Japan Tel: +81-50-5433-4157 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 9, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: APYHRO00342 To whom it may concern, Sharp Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, ________________________ Ohtsuka Taihei [email protected]

iCertifi Control Number - IC2026ASOP12477 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16/07/2026 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID: APYHRO00342 SHARP CORPORATION certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi is our designated U.S. agent for service of process for the above referenced FCC ID. Manufacturer accepts to maintain an agent for no less than two year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance Consulting LLC dba iCertifi FCC FRN: 0033399411 Address: 5809 US-2, Suite B, Albeni Plaza Priest River, Idaho 83856, United States Contact Person: Paul Preston Tel: +1 (866) 885-4575 Email: [email protected] Sincerely, SHARP CORPORATION Americas Compliance Consulting LLC dba iCertifi FRN: 0005810866 FRN: 0033399411 Taihei Ohtsuka Paul Preston [email protected] [email protected] +81-50-5433-4157+1 (866) 885-4575 Signature: Signature:

Sharp Corporation 2-1-25, Kyutaromachi, Chuo-ku, Osaka city, 541-8522 Japan Tel: +81-50-5433-4157 Date: July 9, 2026 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: APYHRO00342 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely. ⚫Schematic Diagram ⚫Block Diagram ⚫Part List ⚫Operational Description ⚫Tune-up Procedure Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued: ⚫External Photos ⚫Internal Photos ⚫Test Setup Photos ⚫User Manual It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ____________________ Ohtsuka Taihei [email protected]

Sharp Corporation 2-1-25, Kyutaromachi, Chuo-ku, Osaka city, 541-8522 Japan Tel: +81-50-5433-4157 FCC Agent Authorization Date: July 9, 2026 To whom it may concern, Sharp Corporation hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: APYHRO00342 This authorization is valid until further written notice from Sharp Corporation Sincerely, ________________________ Ohtsuka Taihei [email protected]

FCC ID Location FCC ID : APYHRO00342 ○e-label (on the display) ○Access to the information on the e-label Users are able to access the information in no more than three steps in the device Settings menu. STEP1: Click on "Settings" STEP2: Click on "About phone" STEP3: Click on "Regulatory labels" ○Instruction of e-label on the user manual * Users are provided specific instructions on how to access the information. FCC Notice (FCC ID Location) ○Labeling for Purchasing The FCC ID is printed on the package. 〇Note * The information is stored on the device, no special accessories or supplemental plug-ins (e.g., SIM/USIM card) are required to access the information. * Users are provided specific instructions on how to access the information. The user cannot modify the e-label information. *The FCC ID, warning statements, or other information are displayed electronically in a manner that is clearly legible without the aid of magnification. FCC ID: APYHRO00342 Model Name Manufacturer

Date: 2026-06-10 System Check_Head_13MHz DUT: CLA-13 - SN1011 Communication System: CW; Frequency: 13.000 MHz Medium: HSL_4-250_260610 Medium parameters used: f= 13.000 MHz; σ= 0.757 S/m; ε r = 55.1 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN3931; ConvF(17.55, 17.18, 17.51); Calibrated: 2025-10-23 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1697; Calibrated: 2025-11-19 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2205; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0-- Pin=30.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.543 W/kg; SAR (10g) = 0.439 W/kg; TSL Correction: Positive only Pin=30.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = -0.04 dB SAR (1g) = 0.515 W/kg; SAR (8g) = 0.338 W/kg; SAR (10g) = 0.319 W/kg Smallest distance from peaks to all points 3 dB below = 15.8 mm Ratio of SAR at M2 to SAR at M1 = 75.8 % TSL Correction: Positive only Date: 2026-06-03 System Check_Head_750MHz DUT: D750V3 - SN1117 Communication System: CW; Frequency: 750.000 MHz Medium: HSL_600-7200_260603 Medium parameters used: f= 750.000 MHz; σ= 0.867 S/m; ε r = 41.5 Ambient Temperature: 23.3°C; Liquid Temperature: 22.3°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(9.08, 8.91, 9.18); Calibrated: 2026-03-26 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn376; Calibrated: 2026-04-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2127; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0 Pin=24.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 2.09 W/kg; SAR (10g) = 1.39 W/kg; TSL Correction: Positive only Pin=24.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = -0.01 dB SAR (1g) = 2.06 W/kg; SAR (8g) = 1.45 W/kg; SAR (10g) = 1.38 W/kg Smallest distance from peaks to all points 3 dB below = > 15.0 mm Ratio of SAR at M2 to SAR at M1 = 90.0 % TSL Correction: Positive only Date: 2026-06-09 System Check_Head_750MHz DUT: D750V3 - SN1117 Communication System: CW; Frequency: 750.000 MHz Medium: HSL_600-7200_260609 Medium parameters used: f= 750.000 MHz; σ= 0.926 S/m; ε r = 43.6 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(9.69, 9.27, 10.31); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0-- Pin=24.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 2.22 W/kg; SAR (10g) = 1.48 W/kg; TSL Correction: Positive only Pin=24.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.05 dB SAR (1g) = 2.25 W/kg; SAR (8g) = 1.60 W/kg; SAR (10g) = 1.52 W/kg Smallest distance from peaks to all points 3 dB below = > 15.0 mm Ratio of SAR at M2 to SAR at M1 = 86.4 % TSL Correction: Positive only Date: 2026-06-03 System Check_Head_835MHz DUT: D835V2 - SN4d167 Communication System: CW; Frequency: 835.000 MHz Medium: HSL_600-7200_260603 Medium parameters used: f= 835.000 MHz; σ= 0.895 S/m; ε r = 41.3 Ambient Temperature: 23.3°C; Liquid Temperature: 22.3°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(8.84, 8.67, 8.94); Calibrated: 2026-03-26 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn376; Calibrated: 2026-04-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2127; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0 Pin=24.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 2.43 W/kg; SAR (10g) = 1.60 W/kg; TSL Correction: Positive only Pin=24.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = -0.01 dB SAR (1g) = 2.41 W/kg; SAR (8g) = 1.69 W/kg; SAR (10g) = 1.60 W/kg Smallest distance from peaks to all points 3 dB below = 18.4 mm Ratio of SAR at M2 to SAR at M1 = 90.1 % TSL Correction: Positive only Date: 2026-06-09 System Check_Head_835MHz DUT: D835V2 - SN4d167 Communication System: CW; Frequency: 835.000 MHz Medium: HSL_600-7200_260609 Medium parameters used: f= 835.000 MHz; σ= 0.954 S/m; ε r = 43.4 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(9.56, 9.14, 10.17); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0-- Pin=24.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 2.37 W/kg; SAR (10g) = 1.56 W/kg; TSL Correction: Positive only Pin=24.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.06 dB SAR (1g) = 2.40 W/kg; SAR (8g) = 1.69 W/kg; SAR (10g) = 1.61 W/kg Smallest distance from peaks to all points 3 dB below = 20.4 mm Ratio of SAR at M2 to SAR at M1 = 86.6 % TSL Correction: Positive only Date: 2026-06-04 System Check_Head_1900MHz DUT: D1900V2 - SN5d041 Communication System: CW; Frequency: 1900.000 MHz Medium: HSL_600-7200_260604 Medium parameters used: f= 1900.000 MHz; σ= 1.36 S/m; ε r = 39.2 Ambient Temperature: 23.4°C; Liquid Temperature: 22.4°C DASY8 Configuration: - Probe: EX3DV4 - SN3728; ConvF(7.25, 7.12, 7.34); Calibrated: 2026-03-26 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn376; Calibrated: 2026-04-20 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2127; Section: Flat - Measurement Software: 16.4.0.5005 - UID: CW, 0 Pin=24.0dBm/Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 10.3 W/kg; SAR (10g) = 5.32 W/kg; TSL Correction: Positive only Pin=24.0dBm/Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.01 dB SAR (1g) = 10.1 W/kg; SA…

Text truncated - open the document above for the full version.

Date: 2026-06-09 _GSM850_GPRS 1 Tx slot_Right Cheek_0mm_Ch128 Communication System: GPRS-FDD; Frequency: 824.200 MHz Medium: HSL_600-7200_260609 Medium parameters used: f= 824.200 MHz; σ= 0.950 S/m; ε r = 43.4 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(9.56, 9.14, 10.17); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: RightHead - Measurement Software: 16.4.0.5005 - UID: GSM, 10023-DAC Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.152 W/kg; SAR (10g) = 0.105 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.10 dB SAR (1g) = 0.171 W/kg; SAR (8g) = 0.141 W/kg; SAR (10g) = 0.137 W/kg Smallest distance from peaks to all points 3 dB below = > 15.0 mm Ratio of SAR at M2 to SAR at M1 = 92.6 % TSL Correction: Positive only #01 Date: 2026-06-08 _GSM1900_GPRS 3 Tx slots_Left Cheek_0mm_Ch810 Communication System: GPRS-FDD; Frequency: 1909.800 MHz Medium: HSL_600-7200_260608 Medium parameters used: f= 1909.800 MHz; σ= 1.46 S/m; ε r = 41.4 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(7.54, 7.21, 8.01); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: LeftHead - Measurement Software: 16.4.0.5005 - UID: GSM, 10027-DAC Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.065 W/kg; SAR (10g) = 0.038 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.10 dB SAR (1g) = 0.067 W/kg; SAR (8g) = 0.046 W/kg; SAR (10g) = 0.043 W/kg Smallest distance from peaks to all points 3 dB below = 14.6 mm Ratio of SAR at M2 to SAR at M1 = 87.6 % TSL Correction: Positive only #02 Date: 2026-06-09 _WCDMA V_RMC 12.2Kbps_Right Cheek_0mm_Ch4182 Communication System: UMTS-FDD; Frequency: 836.400 MHz Medium: HSL_600-7200_260609 Medium parameters used: f= 836.400 MHz; σ= 0.954 S/m; ε r = 43.4 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(9.56, 9.14, 10.17); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: RightHead - Measurement Software: 16.4.0.5005 - UID: WCDMA, 10011-CAC Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.148 W/kg; SAR (10g) = 0.102 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.15 dB SAR (1g) = 0.165 W/kg; SAR (8g) = 0.136 W/kg; SAR (10g) = 0.131 W/kg Smallest distance from peaks to all points 3 dB below = > 15.0 mm Ratio of SAR at M2 to SAR at M1 = 93.3 % TSL Correction: Positive only #03 Date: 2026-06-16 _LTE Band 2_20M_QPSK_1_0_Left Cheek_0mm_Ch18700 Communication System: LTE-FDD; Frequency: 1860.000 MHz Medium: HSL_600-7200_260616 Medium parameters used: f= 1860.000 MHz; σ= 1.42 S/m; ε r = 40.0 Ambient Temperature: 23.6°C; Liquid Temperature: 22.6°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(7.54, 7.21, 8.01); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: LeftHead - Measurement Software: 16.4.0.5005 - UID: LTE-FDD, 10169-CAF Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.070 W/kg; SAR (10g) = 0.041 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.14 dB SAR (1g) = 0.076 W/kg; SAR (8g) = 0.053 W/kg; SAR (10g) = 0.051 W/kg Smallest distance from peaks to all points 3 dB below = 11.2 mm Ratio of SAR at M2 to SAR at M1 = 88.1 % TSL Correction: Positive only #04 Date: 2026-06-09 _LTE Band 5_10M_QPSK_1_49_Right Cheek_0mm_Ch20525 Communication System: LTE-FDD; Frequency: 836.500 MHz Medium: HSL_600-7200_260609 Medium parameters used: f= 836.500 MHz; σ= 0.954 S/m; ε r = 43.4 Ambient Temperature: 23.2°C; Liquid Temperature: 22.2°C DASY8 Configuration: - Probe: EX3DV4 - SN7625; ConvF(9.56, 9.14, 10.17); Calibrated: 2025-12-09 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: RightHead - Measurement Software: 16.4.0.5005 - UID: LTE-FDD, 10175-CAH Area Scan (120.0 mm x 210.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.188 W/kg; SAR (10g) = 0.129 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm Power Drift = 0.10 dB SAR (1g) = 0.209 W/kg; SAR (8g) = 0.172 W/kg; SAR (10g) = 0.167 W/kg Smallest distance from peaks to all points 3 dB below = > 15.0 mm Ratio of SAR at M2 to SAR at M1 = 92.6 % TSL Correction: Positive only #05 Date: 2026-06-29 _LTE Band 7_20M_QPSK_1_99_Left Cheek_0mm_Ch21350 Communication System: LTE-FDD; Frequency: 2560.000 MHz Medium: HSL_600-7200_260629 Medium parameters used: f= 2560.000 MHz; σ= 1.90 S/m; ε r = 40.5 Ambient Temperature: 23.6°C; Liquid Temperature: 22.6°C DASY8 Configuration: - Probe: EX3DV4 - SN7694; ConvF(7.32, 6.8, 7.27); Calibrated: 2025-10-23 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1424; Calibrated: 2025-12-03 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2145; Section: LeftHead - Measurement Software: 16.4.0.5005 - UID: LTE-FDD, 10169-CAF Area Scan (120.0 mm x 200.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 0.169 W/kg; SAR (10g) = 0.085 W/kg; TSL Correction: Positive only Zoom Scan (30.0 mm x 30.0 mm x 31.2 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm …

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 CLA13, serial no. 1011 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> CLA13 – serial no. 1011 13MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 07.10.2023 (Cal. Report) -45.885 50.393 -0.32472 07.09.2024 (extended) -37.62 18.012 51.213 0.82 -0.59437 -0.2697 07.08.2025 (extended) -38.699 15.661 50.405 0.012 1.112 1.4367 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - CLA13, serial no. 1011 (Data of Measurement : 07.09.2024) CLA13 MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - CLA13, serial no. 1011 (Data of Measurement : 07.08.2025) CLA13 MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D750V3, serial no. 1117 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D750V3 – serial no. 1117 750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.12.2025 (Cal. Report) -28.2 52.2 -3.3 03.11.2026 (extended) -29.33 -4 51.494 -0.706 -3.209 0.091 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D750 V3, serial no. 1117 (Data of Measurement : 03.11.2026) 750MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D750V3, serial no. 1117 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D750V3 – serial no. 1117 750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.12.2025 (Cal. Report) -28.2 52.2 -3.3 03.11.2026 (extended) -29.33 -4 51.494 -0.706 -3.209 0.091 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D750 V3, serial no. 1117 (Data of Measurement : 03.11.2026) 750MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D1750V2, serial no. 1112 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D1750V2 – serial no. 1112 1750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.20.2025 (Cal. Report) -33.2 51.2 1.8 02.19.2026 (extended) -31.841 -4.09 50.261 -0.939 1.99 0.19 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D1750 V2, serial no. 1112 (Data of Measurement : 02.19.2026) 1750MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D1750V2, serial no. 1112 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D1750V2 – serial no. 1112 1750MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 02.20.2025 (Cal. Report) -33.2 51.2 1.8 02.19.2026 (extended) -31.841 -4.09 50.261 -0.939 1.99 0.19 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D1750 V2, serial no. 1112 (Data of Measurement : 02.19.2026) 1750MHz - Head

SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D2600V2, serial no. 1078 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2600V2 – serial no. 1078 2600MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 06.11.2025 (Cal. Report) -22.797 49.609 -7.227 06.10.2026 (extended) -22.33 2.049 49.2 -0.409 -7.68 -0.453 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D2600V2, serial no. 1078 (Data of Measurement : 06.10.2026) 2600 MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D5000V2, serial no. 1006 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D5000V2 – serial no. 1006 5250MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 10.15.2024 (Cal. Report) -23.831 52.962 -5.937 10.14.2025 (extended) -19.925 16.39% 57.307 4.345 -9.5184 -3.5814 5600MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 10.15.2024 (Cal. Report) -20.994 57.190 -6.325 10.14.2025 (extended) -18.983 9.579% 55.998 -1.192 -6.4629 -0.1379 5800MHZ Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 10.15.2024 (Cal. Report) -24.405 55.486 3.209 10.14.2025 (extended) -22.094 9.469% 55.421 -0.065 6.6866 3.4776 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Dipole Verification Data> - D5000V2, serial no. 1006 (Data of Measurement : 10.14.2025) 5000 MHz - Head

TEL : 886-3-327-3456 Page 1 of 59 FAX : 886-3-328-4978 Issued Date : Jul. 08, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5D2218 FCC SAR TEST REPORT FCC ID : APYHRO00342 Equipment : Smart phone Brand Name : SHARP Model Name : APYHRO00342 Applicant : SHARP CORPORATION 2-1-25, Kyutaromachi, Chuo-ku, Osaka city, Osaka 541-8522, JAPAN Manufacturer : SHARP CORPORATION 2-1-25, Kyutaromachi, Chuo-ku, Osaka city, Osaka 541-8522, JAPAN Standard : FCC 47 CFR Part 2 (2.1093) The product was received on May 20, 2026 and testing was started from Jun. 03, 2026 and completed on Jun. 30, 2026. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 59 FAX : 886-3-328-4978 Issued Date : Jul. 08, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5D2218 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 3.2 General LTE SAR Test and Reporting Considerations ........................................................................................... 6 4. RF Exposure Limits....................................................................................................................................................... 8 4.1 Uncontrolled Environment ...................................................................................................................................... 8 4.2 Controlled Environment .......................................................................................................................................... 8 5. Specific Absorption Rate (SAR) ................................................................................................................................... 9 5.1 Introduction ............................................................................................................................................................ 9 5.2 SAR Definition .....................................................................................................................................…

Text truncated - open the document above for the full version.