ATI9R3HRD10701FM Transmitter

HR7012M / HR7012S Custom Vehicle Headrests with 7” Slim Style LED LCD Satellite Monitors or Built-in DVD Player for Rear Entertainment Installation Guide 128-9047 S HR7012M S P HR7012S Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them. Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets). Damage to air bag wiring can result in personal injury to vehicle occupants. If you have any questions regarding wire routing or installation in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074. When connecting power and ground in a mobile video installation, insure that the ACC wire is fused at the point where it is connected to the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product. IMPORTANT NOTICE An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to be operator of the motor vehicle. Licensed under one or more of the following patents: Patent NOS. 7,245,274, 6,899,365, and 6,678,892 2 3 MATERIAL TO USE IN THIS PACKAGE: 1) HR7012 System Monitor (P/N HR7012M/HR7012S) (2 pcs) Custom Vehicle Headrests with 7” Slim Style LED LCD Satellite Monitors or Built-in DVD Player for Rear Entertainment a) Remote Control with Wireless Game Controller (P/N 136-5236) - (2pcs) d) Wireless FMM Interface Box (P/N 136-5237) - (1pc) b) 2 Pin DC Power Cable (P/N 112-3667) - (1pc) e) Document Kit c) 12 Pin AV Adapter Cable (P/N 112-4094) - (1pc) Note: The HR7012M/HR7012S monitor has been designed to be interchangeable from one headrest to the other. The wireless FMM Interface Box automatically determines which headrest is M1 and which headrest is M2 and sets each headrest to its own function (IR transmitter channel and IR receiver remote control codes). The headrests will still have the Red/Green(MH1 & MH2) and Blue/Yellow (SH1 & Sh2) DIN cables on them and should be connected to their respective connectors. 2) HR7012PKG Accessories Package (P/N HR7012K) (1 pc) The Accessories Package contains the following items: Note: The Document kit is packaged with the Owner’s Manual (P/N 128-9046) - (1pc), Installation Guide (P/N 128-9047) - (1pc), and Product Registration Card (132-6751) - (1pc). S HR7012M S P HR7012S 2) HR7012GP Game Module Package (P/N HR7012GP) (1 pc) OPTIONAL The Game Module Package contains the following items: c) (P/N 136-5238) - (1pc) Game Module RESET SELECT START P2 Y B A X RESET SELECT START P1 Y B A X a) (P/N 136-5239) - (1pc) Game Controller P1 b) (P/N 136-5240) - (1pc) Game Controller P2 d) (P/N 128-9048) - (1pc) Game Module Manual Note: The HR7012GP Game Package is the optional accessories package. For user to upgrade with the wireless game source feature. 4 5 HR7012 SYSTEM OVERVIEW 1)The HR7012 is a versatile audio / video system with built-in DVD (HR7012M only) which includes two monitors, that can accept an Audio / Video input and independent AUX input. A separate audio output is provided for connecting the FM Modulator to the vehicle's radio. 2)The HR7012M/HR7012S Monitor is comprised of a 7" slime style LED LCD satellite monitor or with built-in DVD player that allows the user to select from HR7012M: DVD/USB > M1or M2 > AV > AUX > MEDIA > GAME(optional) / HR7012S: M1or M2 > AV > AUX > GAME(optional). The HR7012M/HR7012S monitor has a built-in infrared audio transmitter (CH A) for use with the optional two-channel wireless headphones (CH A). The HR7012M/HR7012S monitor also has the ability to select either audio source for output to the FM Modulator to allow audio playback through the vehicle radio. 3)The HR7012M/HR7012S monitor is comprised of a 7" slime style LED LCD satellite monitor or with built-in DVD player that allows the user to select from HR7012M: DVD/USB > M1or M2 > AV > AUX > MEDIA > GAME(optional) / HR7012S: M1or M2 > AV > AUX > GAME(optional). The HR7012M/HR7012S monitor has a built-in infrared audio transmitter (CH B) for use with the optional two channel wireless headphones (CH B). 4)The monitors will show all of the functions with the comprehensive OSD. 5)The optional two-channel wireless Headphone sets have an A-B switch that allow the users to select the audio from either the HR7012M/HR7012S (CH A) or the HR7012M/HR7012S (CH B). 6)The optional wired headphone that allow the user to listen audio from the system. 7)The HR7012M and HR7012S Monitor will accept an audio / video input through the 1/8” jack located on the front of the unit. The audio / video device could be a video game system, video camera, or other input device. 8) The optional HR7012GP game package is allow the user to playing the wireless game from the system. 6 9) Insert/Eject HR7012MHR7012S Inner Ring Insert/Eject Disc S P S AUDIO R VIDEO AUDIO L AUDIO R VIDEO AUDIO L PULL UPPULL UP HR7012M HR7012S USB VIDEO AUDIO L AUDIO R WIRED HEADPHONE 20 degrees 7 VEHICLE PREPARATION 1)Read the manuals and get familiar with the electrical requirements and connections. 2)Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle's wiring as well as all areas where interconnecting wire harnesses will be located. The mounting method and the location …

Text truncated - open the document above for the full version.

910805 2 ACTION INDUSTRIES (M) SDN. BHD. (166780-H) 2480, Tingkat Perusahaan Enam, Prai Free Trade Zone, 13600 Perai, Penang, Malaysia. Tel: 04-3997600-2, Fax: 04-3997604 Email: [email protected] Website: http://www.actionind.com.my Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize ELECTRONICS TESTING CENTER, TAIWAN, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ELECTRONICS TESTING CENTER, TAIWAN on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; 910805 3 ACTION INDUSTRIES (M) SDN. BHD. (166780-H) 2480, Tingkat Perusahaan Enam, Prai Free Trade Zone, 13600 Perai, Penang, Malaysia. Tel: 04-3997600-2, Fax: 04-3997604 Email: [email protected] Website: http://www.actionind.com.my e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, (signature) LL Tan / R&D MANAGER ACTION INDUSTRIES (M) SDN BHD

910805 1 ACTION INDUSTRIES (M) SDN. BHD. (166780-H) 2480, Tingkat Perusahaan Enam, Prai Free Trade Zone, 13600 Perai, Penang, Malaysia. Tel: 04-3997600-2, Fax: 04-3997604 Email: [email protected] Website: http://www.actionind.com.my Federal Communications Commission FCC ID: ATI9R3HRD10701 Product Name: FM Transmitter Model Name: HRD10701, HRM10701,HR7012M ,HR7012S HR7012GP,HR7012K Trade Name: AUDIOVOX, AXION Dear Sir: In accordance with 47 C.F.R. Section 0.459, we would like to request confidentiality on some exhibits we submitted for above application for the reason of trade secret. If those exhibits are available for public inspection, any person who once gets the information contained in those exhibits will be able to design and to make the same products very easily. This is a very serious problem and huge loss for us, because we did invest so much on it. Please be not made the Exhibit Types listed below routinely available for public inspection: Block Diagram and Schematics. By: By: LL TAN (Signature) (Printed) Title : R&D MANAGER Applicant : ACTION ELECTRONICS CO., LTD. Address : 2480,TINGKAT PERUSAHAAN ENAM,PRAI FREE TRADE ZONE, 13600,PERAI,PENANG,MALAYSIA. Tel : +6 04 3997600 Fax: +6 04 3997604 Date : 12 Mar 2012

ETC Report No.: 12-03-RBF-097-02 Sheet 1 of 5 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 1. 2. ETC Report No.: 12-03-RBF-097-02 Sheet 2 of 5 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 3. 4. ETC Report No.: 12-03-RBF-097-02 Sheet 3 of 5 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 5. 6.

ETC Report No.: 12-03-RBF-097-02 Sheet 4 of 5 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 7. 8. ETC Report No.: 12-03-RBF-097-02 Sheet 5 of 5 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 9.

Rev. No 2.0 FCC Part 15 Subpart C TEST REPORT of E.U.T. : FM Transmitter FCC ID. : ATI9R3HRD10701 MODEL : HRD10701,HRM10701, HR7012M ,HR7012S, HR7012GP,HR7012K DD7012, DM7012, MM7012 Working Frequency : 88.1~107.9 MHz for APPLICANT : ACTION INDUSTRIES (M) SDN BHD ADDRESS : 2480,TINGKAT PERUSAHAAN ENAM,PRAI FREE TRADE ZONE, 13600,PERAI,PENANG,MALAYSIA. Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU, LINKOU DIST., NEW TAIPEI CITY, TAIWAN, 24442, R.O.C. http://www.etc.org.tw ; e-mail : [email protected] Tel:(02)26023052 Fax:(02)26010910 Report Number: 12-03-RBF-097-02 ETC Report No.:12-03-RBF-097-02 FCC ID.: ATI9R3HRD10701 Rev. No 2.0 TEST REPORT CERTIFICATION Applicant : ACTION INDUSTRIES (M) SDN BHD 2480,TINGKAT PERUSAHAAN ENAM,PRAI FREE TRADE ZONE, 13600,PERAI,PENANG,MALAYSIA. Manufacturer : (1)ACTION INDUSTRIES (M) SDN BHD (2)Action Asia(shenzhen)Co,ltd (1)2480,TINGKAT PERUSAHAAN ENAM,PRAI FREE TRADE ZONE, 13600,PERAI,PENANG,MALAYSIA. (2)DeDe industrial Park,Jian'an Road,High-Tech industrial Park,Fuyong Town,Bao'an District,Shenzhen 518103 China Description of EUT : a) Type of EUT : FM Transmitter b) Trade Name : AUDIOVOX, AXION c) Model No : HRD10701,HRM10701, HR7012M ,HR7012S, HR7012GP,HR7012K DD7012, DM7012, MM7012 d) Working Frequency : 88.1~107.9 MHz e) Power Supply : DC 12V Regulation Applied : FCC Rules and Regulations Part 15 Subpart C I HEREBY CERTIFY THAT; The data shown in this report were made in accordance with the procedures given in ANSI C63.4 and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Issued Date : May. 07, 2012 Test Engineer : ( Vincent Chang, Engineer ) Approve & Authorized : S. S. Liou, Section Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No.:12-03-RBF-097-02 FCC ID.: ATI9R3HRD10701 Rev. No 2.0 Table of Contents 1. GENERAL INFORMATION .................................................................................................. 1 1.1 Product Description ...................................................................................................... 1 1.2 Test Methodology ......................................................................................................... 1 1.3 Test Facility .......................................................................................................... 1 2. DEFINITION AND LIMITS.................................................................................................... 2 2.1 Definition .......................................................................................................... 2 2.2 Restricted Bands of Operation ...................................................................................... 2 2.3 Limitation .......................................................................................................... 2 2.4 Labeling Requirement................................................................................................... 3 2.5 User Information ..........................................................................................................3 3. SYSTEM TEST CONFIGURATION ..................................................................................... 4 3.1 Justification .......................................................................................................... 4 3.2 Devices for Tested System ........................................................................................... 4 4 RADIATED EMISSION MEASUREMENT.......................................................................... 5 4.1 Applicable Standard...................................................................................................... 5 4.2 Measurement Procedure ............................................................................................... 5 4.3 Measuring Instrument ................................................................................................... 7 4.4 Test Data .......................................................................................................... 8 4.5 Field Strength Calculation ..........................................................................................13 4.6 Radiated Measurement Photos....................................................................................14 5 CONDUCTED EMISSION MEASUREMENT ................................................................... 15 5.1 Standard Applicable....................................................................................................15 6 ANTENNA REQUIREMENT ............................................................................................... 16 6.1 Standard Applicable....................................................................................................16 6.2 Antenna Construction .................................................................................................16 7 EMISSION BAND MEASUREMENT.................................................................................. 17 7.1 Standard Applicable....................................................................................................17 7.2 Measurement Procedure .............................................................................................17 7.3 Measurement Equipment ............................................................................................17 7.4 Measurement Data ......................................................................................................17 ETC Report No.: 12-03-RBF-097-02 Sheet 1 of 22 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 1. GENERAL INFORMATION 1.1 Product Description a) Type of EUT : FM Transmitter b) Trade Name : AUDIOVOX, AXION c) Model No. : HRD10701,HRM10701, HR7012M ,HR7012S, HR7012GP,HR7012K DD7012, DM7012, MM7012 d) Frequency Modulation : 88.1~107.9 MHz e) Power Supply : DC 12V f) Model difference d…

Text truncated - open the document above for the full version.

ETC Report No.: 12-03-RBF-097-02 Sheet 13 of 20 Sheets FCC ID.: ATI9R3HRD10701 Rev. No 2.0 4.6 Radiated Measurement Photos