ATI9R3ODM909029� Digital Audio Video Player with FM Transmitter

Owner Manual / Installation Guide ODM90902CR Overhead 9" TFT LCD Monitor with Built-in DVD Player 2 Important Notice An LCD panel or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may Congratulations on your purchase of the unit Flip Down Monitor. This unit has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner’s manuals for each component in your system to obtain a full understanding of each component’s operation. Safety Precaution For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your entertainment system but remember the safety of all passengers remains the number one priority. 3 SPECIFICATIONS Resolution2400 x 480 Pixels1,152,000 Operation Temperature32 ~131º F (0 ~ 55º C) Storage Temperature-4 ~ 176º F (-20 ~ 70º C) Backlight life10,000 Hours Video Display SystemNTSC/PAL Video Output 1.0Vp-p @ 75 ohms Power Source12V DC DimensionsW X H X L 235 X 46 X 275mm FEATURES l l l l l l l l l l l l 9 Inch TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor. OSD (On Screen Display) for control of Picture Quality and Functions. Full Function Remote Control. Playing DVD, CD and MP3 Disc. Built-in 16 Channel Frequency Wireless FM Modulator. Dome Light with 3-Position Switch. Three Audio/Video Source Inputs (DVD/SD/USB, AV1 and AUX). AV Output via RCA Cable. Last Position Memory for DVD. Screen Mode Selection (4:3, 16:9). Backlit Controls. USB 2.0 Port. CONTROLS AND INDICATORS DIAGRAM 4 19 101112131410 28 37 4 5 6 15 16 17 5 CONTROLS FUNCTION DESCRIPTIONS 1.POWER Button – Used to turn the DVD and Monitor system on/off. Bright red when the system is on, dim when off. 2.Source Select – Use to select one of the three sources: DVD/SD/USB, AV1, AUX. 3.Screen Mode Button – Allows the user to change the screen format (Aspect Ratio 4:3 or 16:9). 4.Ventilation Openings 5.Monitor Cut Off Switch – Used to turn off monitor when in the closed position. 6.Drop Down Panel 7.PLAY Button – This button is used to start playback of a disc for DVD. 8.STOP Button – This button is used to stop playback for DVD 9.EJECT Button – This Button is used to eject the disc for DVD. 10. Dome Light – Provide additional interior illumination. 11. DVD disc insertion slot – For loading and removing discs. 12. Three Position Dome Light Switch ON – Turns on the dome lights. OFF – The dome lights will not turn on in this position. AUTO – Automatically switches on the dome lights in conjunction with the vehicle's interior illumination. 13. PUSH Button – Push to release the screen for monitor. 14. Infrared Transmitter and Sensor – Use to transmit audio to the wireless headphones. Also allows the remote control to operate the unit and to control other accessories in the system. 15.Auxiliary Audio/ Video Input 16. SD Card Reader – Allow to read the contents (Audio, Photo, Video) data on the Secure Digital Card (SD Card), Multimedia Card (MMC), Memory Stick (MS). 17. USB 2.0 Port 6 Install The Battery In The Remote CR2025 REMOTE CONTROL OPERATION nitial Use When purchased the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before attempting to use the remote. Battery Replacement 1.Remove the battery holder. 2.Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity. 3.Align the battery holder with the remote control and push until the holder clicks. M1M2 POWEREJECT TVDVD SOURCE MUTE DVD SOURCEVOLUME PIX SYSTEM MENUDISC MENUZOOM REPEAT ENTER SUBTITLE SETUPDISPLAY AUDIO 1234 5678 90 IRT ON/OFF FMM ON/OFF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1617 18 19 20 21 22 23 24 25 26 27 28 29 30 REMOTE CONTROL FUNCTION DESCRIPTIONS 7 * Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2.MONITOR SELECT M1 Button – Sets the remote control code to allow control of the unit set to M1 mode. M2 Button** – Sets the remote control code to allow control of the unit set to M2 mode. 3.SOURCE* Each time the button is pressed, the change m…

Text truncated - open the document above for the full version.

ACTION ELECTRONICS CO.,LTD.. 2480,TINGKAT PERUSAHAAN ENAM,PRAO FREE TRADE ZONE,13600,PERAI,PENANG,MALAYSIA Declaration Letter Date:2010-Mar-22 FCC ID:ATI9R3ODM90902 Product 9”DIGITAL AUDIO VIDEO PLAYER Model Name:OHM90902 /ODM90902/ODM90902CR/AV-9W300/ AV-9W300G / AV-9W300B / OHM938LN Trade Name:AXION/EXQAUTO/NISSAN Dear Sir, We,the undersigned, hereby indicate our product modification are approved by the grantee and will be implemented to the production line. Sincerely your LL TAN/RD Manager ACTION ELECTRONICS CO.,LTD. 2480,TINGKAT PERUSAHAAN ENAM,PRAO FREE TRADE ZONE,13600,PERAI,PENANG,MALAYSIA

ACT'ON ACTION INDUSTRTES (M) SDN. BHD. (166780-H) 2480, Tingkat Perusahaan Enam, Prai Free Trade Zone,l3600 Perai. Penang, Malaysia. Tel: 04-399 7600-2,3903469 Fax:04-399 7604 E-mail : [email protected] Website: hft p://www.actionind.com.my Compliance Certification Services Certification Division 56lF Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize ELECTROMCS TESTING CENTE& TAIWAN, to act on our behatf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts canied out by ELECTROMCS TESTING CENTE& TAIWANI on our behalf shatl have the same effect as acts of our own. We, the undersigned, hereby certifr that we are not subject to a denial of federal benefits, ttrat includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTE& TAIWAN as our agent, we still rccogmzn that we are responsible to: comply with the relpvant provisions of the certification program; make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; make claims regnrding certification only in respect of the scope for which certification has been granted; do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the certification Division may consider misleading or unauthorized; a) b) c) d) er0u'5 2 ACT'ON ACTION TNDUSTRIES (M) SDN. BHD. (166730-H) 2480, Tingkat Perusahaan Enam, Prai Fiee Trade Zone,13600 Perai. Penang, Malaysia. Tel: 04-399 7600'2,3903469 Fax:04'399 7604 E-mail: [email protected] Website: hftp://wwwactionind'com'my e) 0 s) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; use certification only to indicate the products are certified as being in conformity with specified standards; endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; keep a record of all complaints made known to the us relating to the product's compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; documbnt the actions taken. h) i) i) k) , t,' /"-,'u This authorirationis valid until further written notice from the applicant. Sincerely Yours, 910805 gtotoJ I LLTAN /RD ACTION INDUSTRIES (M) SDN BHD

GacrtoN ACTION INDUSTRTES (M) SDN. BHD. (16V80-H) 2480, Tingkat Perusahaan Enam, Prai Free Trade Zone,l 3600 perai. Penang, Malaysia. Tel: 04-399 7600-2, 3903469 Fax:04-399 7604 E-mail: [email protected] Website: http://www.actionind.com.my Federal Communications Commission FCC ID: ATI9R3ODM90902 Product Name: 9" DIGITAL ALIDIO VIDEO PLAYER Model Name: OHM90902/ODM90902/ODM90902CR/ AV-9W3 00/AV-9W3 00c/AV-9W3 008/OHM93 8LN Trade Name: AXION/EXQAUTONISSAN Dear Sir: In accordance with 47 C.F.R. Section 0.459, we would like to request confidentiality on some exhibits we submitted for above application for the reason of trade secret. If those exhibits are available for public inspection, any person who once gets the information contained in those exhibits will be able to design and to make the same products very easily. This is a very serious problem and huge loss for us, because we did invest so much on it. Please be not made the Exhibit Types listed below routinely available for public inspection: Block Diagram and Schematics. By: Title Applicant Address LL TAN (Printed) RD MANAGER ACTION ELECTRONICS CO.. LTD. 248O,TINGKAT PERUSAII{{hI ENAM,PR{ FREE TRADE ZONE, I 3 600,PERAI,PENAI.IG,MALAYSIA. +6 04 3997640 Tel Date :t 8 Jan 2009 Fax: +6 M39976M ero8o5 I

ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Top View of EUT Front View of EUT ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Side View of EUT Rear View of EUT ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Side View of EUT

CUSTOMER: REVISION: MODEL: DESCRIPTION: DATE: PAGE: OF: ODM90902 LABEL LOCATION ON UNIT ACTION STANDARD (AXION BRAND) 0 02/03/10 27 UNIT (BACK VIEW) POWER SOURCE : DC 12V MODEL NO.: ODM60902 CR MADE IN MALAYSIA MODEL.: ODM90902 9” OVERHEAD TFT LCD MONITOR WITH DVD PLAYER MADE IN MALAYSIA POWER SOURCE: DC 12V 1. MODEL PLATE (53 x 29mm) 3. FCC/FDA + PATENT LABEL (44 x 32mm) 2. SERIAL NUMBER (Beige Color) (P/N: 50-N9-10020G) S/No.: ODM9090200090800001 (P/N: 90-N9-01020G) 2. SERIAL NUMBER (Gray Color) S/No.: ODM9090200090800001 (P/N: 90-N9-01030G) UNIT (FRONT VIEW) ON OFF AUTO 1. HOLE PLATE (Beige Color) Dimension : Ø 7mm (P/N: 51-1A-00260G) 1. HOLE PLATE (Gray Color) Dimension : Ø 7mm (P/N: 51-1A-00060G) 2 2. LOGO PLATE (32 x 6.5mm) (P/N: 50-KC-00010G) 1 2 3 4 (P/N: 90-D1-0901AG) This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. This product is Class 1 Laser Product and complies with FDA Rules 21 CFR Chapter 1, Subchapter J. US Patent Nos 7,245,274 , 6,899,365 and 6,678,892 FCC ID : ATI9R3ODM90902 4. FCC ID LABEL (44 X 7mm)

ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Interanl View of EUT ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT Internal View of EUT ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Component View of PCB ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of FM transmitter PCB Solder View of FM transmitter PCB ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB

Rev. No 2.0 FCC Part 15 Subpart C TEST REPORT of E.U.T. :9” Digital Audio Video Player with FM Transmitter FCC ID. :ATI9R3ODM90902 MODEL :OHM90902/ODM90902/ODM9090 2CR/AV-9W300/AV-9W300G/ AV-9W300B/OHM938LN Working Frequency : 88.1~91.1 MHz for APPLICANT : ACTION ELECTRONICS CO., LTD. ADDRESS : 2480, TINGKAT PERUSAHAAN ENAM, PRAI FREE TRADE ZONE, 13600, PERAI, PENANG, MALAYSIA. Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU TSUEN, LINKOU SHIANG TAIPEI COUNTY, TAIWAN, 24442, R.O.C. http://www.etc.org.tw ; e-mail : [email protected] Tel:(02)26023052 Fax:(02)26010910 Report Number: 09-11-RBF-055-02 ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 TEST REPORT CERTIFICATION Applicant : ACTION ELECTRONICS CO., LTD. 2480, TINGKAT PERUSAHAAN ENAM, PRAI FREE TRADE ZONE, 13600, PERAI, PENANG, MALAYSIA. Manufacturer : ACTION ELECTRONICS CO., LTD. 2480, TINGKAT PERUSAHAAN ENAM, PRAI FREE TRADE ZONE, 13600, PERAI, PENANG, MALAYSIA. Description of EUT : a) Type of EUT : 9” Digital Audio Video Player with FM Transmitter b) Trade Name : AXION/EXQAUTO/NISSAN c) Model No : OHM90902/ODM90902/ODM90902CR/AV-9W300/ AV-9W300G/AV-9W300B/OHM938LN d) Working Frequency : 88.1~91.1 MHz e) Power Supply : DC 12V Regulation Applied : FCC Rules and Regulations Part 15 Subpart C (2008) I HEREBY CERTIFY THAT; The data shown in this report were made in accordance with the procedures given in ANSI C63.4 and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Issued Date : Feb. 25, 2010 Test Engineer : ( Vincent Chang, Engineer ) Test Engineer : (Charles Wang, Supervisor ) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 Table of Contents 1. GENERAL INFORMATION .................................................................................................. 1 1.1 Product Description ...................................................................................................... 1 1.2 Test Methodology ......................................................................................................... 1 1.3 Test Facility .......................................................................................................... 1 2. DEFINITION AND LIMITS.................................................................................................... 2 2.1 Definition .......................................................................................................... 2 2.2 Restricted Bands of Operation ...................................................................................... 2 2.3 Limitation .......................................................................................................... 2 2.4 Labeling Requirement................................................................................................... 3 2.5 User Information ..........................................................................................................3 3. SYSTEM TEST CONFIGURATION ..................................................................................... 4 3.1 Justification .......................................................................................................... 4 3.2 Devices for Tested System ........................................................................................... 4 4 RADIATED EMISSION MEASUREMENT.......................................................................... 5 4.1 Applicable Standard...................................................................................................... 5 4.2 Measurement Procedure ............................................................................................... 5 4.3 Measuring Instrument ................................................................................................... 7 4.4 Test Data .......................................................................................................... 8 4.5 Field Strength Calculation ..........................................................................................10 4.6 Radiated Measurement Photos....................................................................................11 5 CONDUCTED EMISSION MEASUREMENT ................................................................... 12 5.1 Standard Applicable....................................................................................................12 6 ANTENNA REQUIREMENT ............................................................................................... 13 6.1 Standard Applicable....................................................................................................13 6.2 Antenna Construction .................................................................................................13 7 EMISSION BAND MEASUREMENT.................................................................................. 14 7.1 Standard Applicable....................................................................................................14 7.2 Measurement Procedure .............................................................................................14 7.3 Measurement Equipment ............................................................................................14 7.4 Measurement Data ......................................................................................................14 ETC Report No.:09-11-RBF-055-02 Sheet 1 of 18 Sheets FCC ID.: ATI9R3ODM90902 Rev. No 2.0 1. GENERAL INFORMATION 1.1 Product Description a) Type of EUT : 9” Digital Audio Video Player with FM Transmitter b) Trade Name : AXION/EXQAUTO/NISSAN c) Model No. : OHM90902/ODM90902/ODM90902CR/AV-9W300/ AV-9W300G/AV-9W300B/OHM938LN d) Frequency Modulation : 88.1~91.1 MHz e) Power Supply : DC 12V f) Model Difference Decl…

Text truncated - open the document above for the full version.

ETC Report No.:09-11-RBF-055-02 FCC ID.: ATI9R3ODM90902 Rev. No 2.0 Radiated Measurement Photos