ATI9R3VOD122112" Overhead LCD TV/Monitor w/ DVD Player

128-XXXX 1 of 35 VOD705 ELECTRONICS CORP . ® VOD1221 / VOD1221 P / VOD1221 S DVD PLAYER WITH DROP-DOWN VIDEO MONITOR 128-XXXX 128-XXXX 2 of 35 -2- Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Television Reception This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss. Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784 128-XXXX 3 of 35 -3- Congratulations on your purchase of the Audiovox VOD1221 DVD Player with Drop-Down Video /Monitor. The VOD1221 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner’s manuals for each component in your system to obtain a full understanding of each component’s operation. Safety Precaution For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat- belts remain fastened. Enjoy your Audiovox entertainment system but remember the safety of all passengers remains the number one priority. Features •12.1 Inch TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor •On Screen Display •Optional TV Tuner* •Full Function Remote Control •Infrared Transmitter for IR Wireless Headphones. •Three Audio / Video Inputs (AUX / AV1 / AV2) •Built-in DVD Player •Two Headphone Jacks •Built-in Five Frequency Wireless FM Modulator (**Optional Relay Box) •AV Line Out •Forward and Side Remote Sensor •Dome Lights with Switch •Backlit Controls for Low Light Operation • Last Position Memory for DVD •Game Port Options * Audiovox P/N PODTVT ** Audiovox P/N SIRSWB 128-XXXX 4 of 35 -4- Controls and Indicators Diagram 128-XXXX 5 of 35 -5- Control Function Descriptions 1.POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off. 2.SOURCE Select – Used to select one of the three sources (DVD, AUX/GAME, AV1, AV2 or TV *TV Optional). 3.SCREEN MODE Button – Allows the user to change screen format (Aspect Ratio, 4:3 or 16:9) 4.Disc insertion slot – For loading Disc. 5.PLAY ( ) Button – This button is used to start playback of a disc. 6.STOP ( ) Button – To stop playback. 7.EJECT ( ) Button – For ejecting discs from the disc compartment. 8.Dome Lights – Provide additional interior illumination. 9. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The dome lights will not turn on in this position. • On – Turns on the dome lights. 10. Headphone Jacks – Allow the use of wired headphones with a 1/8” plug for listening to the video program audio. 11. Remote Sensor Eye – Allows the remote control to operate the VOD1221, control volume to wired headphone jacks and control the other accessories. 12. Game Port – Connect the supplied game controller to this input to play a variety of video games. Note: When plug in the Game Controller, the AUX input must be removed. 13. Auxiliary Audio Left Input. 14. Auxiliary Audio Right Input. 15. Auxiliary Video Input. 16. Screen release – Moves in direction of the arrow to release the drop down screen. 17. FM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through the available FM frequencies (Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz and OFF). 128-XXXX 6 of 35 -6- 18. () Button – Use this button to decrease the volume level of the headphone jacks. If we press the picture select button, the button will used to decrease level in the picture adjust mode. Note:These buttons will not affect the volume of wireless headphones or the wireless FM modulator. When using…

Text truncated - open the document above for the full version.

1 Helen Zhao Subject:FW: ACTION ELECTRONICS CO., LTD., FCC ID: ATI9R3VOD1221, Assessment NO.: AN05T4898, Notice#1 Exhibit-E-User_Man ual_revised.... Exhibit-C-Test_Rep ort_revised.... Exhibit-H-External_ Photo_revis... Exhibit-B-Internal_P hoto_revis... From: "SS" To: "Helen Zhao" <[email protected]> Subject: Re: ACTION ELECTRONICS CO., LTD., FCC ID: ATI9R3VOD1221, Assessment NO.: AN05T4898, Notice#1 > Dear Helen, > > #1 Please find attached the revised user manual. > #2 These devices were not used during the test. The test report is revised. > #3 A CD containing the 1 kHz audio signal was put into the EUT and set to > play mode during the test. > #4 Please find revised attached product photos. > #5 Please refer to productinternal photos. > > Best regards, > > S. S. Liou > > Question #1: Please revise user manual to include user information as > specified in FCC 15.21. > > Question #2: The test report indicates that DVD player and LCD TV were used > during the test, however they do not show up on the setup photos. Please > explain. > > Question #3: The test report section 1.3 indicates that "The test signal is > 1kHz standard test audio signal." However signal generator was not on the > setup photos, please explain how you tested with 1KHz standard test audio > signal. > > Question #4: Please modify external photo exhibit to add bottom view of EUT. > > Question #5: Please indicate Antenna location on the Schematics. > > Best Regards, > Helen Zhao > > The items indicated above must be submitted before processing can continue 2 > on the above referenced application. Failure to provide the requested > information within 30 days of the original e-mail date may result in > application dismissal and forfeiture of the filing fee. Also, please note > that partial responses increase processing time and should not be submitted. > Any questions about the content of this correspondence should be directed to > the e-mail address listed below the name of the sender. > >

ETC Report No.:ET94R-05-072-01 Sheet 1 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 1. Front View of EUT 2. Open View of EUT ETC Report No.:ET94R-05-072-01 Sheet 2 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 3. Front View of EUT 4. Side View of EUT ETC Report No.:ET94R-05-072-01 Sheet 3 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 5. Rear View of EUT 6. Side View of EUT ETC Report No.:ET94R-05-072-01 Sheet 4 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 7. Bottom View of EUT

CUSTOMER : REVISION : DATE: PAGE: MODEL: DESCRIPTION : OF UNIT LABEL LOCATIONNEW AUDIOVOX VOD1221 1 20/05/05 1 1 CHASSIS LABEL 3 BC S/N LBL 136-XXXX-POD This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. This product is Class 1 Laser Product and complies with FDA Rules 21 CFR Chapter 1, Subchapter J. FCC/FDA/CLASS 1 LASER LABEL 2 040900000112345670 WARRANTY VOID IF LABEL REMOVED CUSTOMER : REVISION : DATE: PAGE: MODEL: DESCRIPTION : OF UNIT LABEL LOCATIONNEW AUDIOVOX VOD1221 1 20/05/05 1 1 CHASSIS LABEL 3 BC S/N LBL 136-XXXX-POD This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. This product is Class 1 Laser Product and complies with FDA Rules 21 CFR Chapter 1, Subchapter J. FCC/FDA/CLASS 1 LASER LABEL 2 040900000112345670 WARRANTY VOID IF LABEL REMOVED BACK VIEW FRONT PANEL 6 LAMP-AUTO VIO/BRN BLK/RED RED/BLK RED (RCA) WHITE (RCA) YELLOW (RCA) RED BLACK LAMP-COMMON LAMP-ON LINE OUT-RIGHT LINE OUT-LEFT VIDEO OUTPUT Signal NameColor POWER +12v (SW) POWER GROUND 12-Pin Harness MODEL No.: VOD1221 Made in Malaysia To 2-Pin Connector 132-XXXX Inspected By : RED AUDIO IN-RIGHT (IR-INPUT) WHITE AUDIO IN-LEFT (IR-INPUT) 150 Marcus Blvd., Hauppauge, NY 11788 Technical Assistance: 1-800-225-6074 ELECTRONICS CORP . ® P/N : 90-KQ-0201 4 PATENTS LABEL WARNING An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video moni- tor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in ‘park’ or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. NOTE: This label is to be removed by the end user only! 6 WARNING LABEL Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784 FCC ID : ATI9R3VOD1221 5 FCC ID (ATI9R3VOD1221) LABEL 1 2 3 4 5 360MM 3 9 0 M M

ETC Report No.:ET94R-05-072-01 Sheet 5 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 8. Component View of PCB 9. Solder View of PCB Antenna ETC Report No.:ET94R-05-072-01 Sheet 6 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 10. Component View of PCB 11. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 7 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 12. Component View of PCB 13. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 8 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 14. Component View of PCB 15. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 9 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 16. Component View of PCB 17. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 10 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 18. Component View of PCB 19. Component View of PCB ETC Report No.:ET94R-05-072-01 Sheet 11 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 20. Solder View of PCB 21. Component View of PCB ETC Report No.:ET94R-05-072-01 Sheet 12 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 22. Solder View of PCB 23. Component View of PCB ETC Report No.:ET94R-05-072-01 Sheet 13 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 24. Solder View of PCB 25. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 14 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 26. Component View of PCB 27. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 15 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 28. Component View of PCB 29. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 16 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 30. Component View of PCB 31. Solder View of PCB ETC Report No.:ET94R-05-072-01 Sheet 17 of 17 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 CONSTRUCTED PHOTOS of EUT 32. Component View of PCB 33. Solder View of PCB

The VOD1221 is equipped with buit-in wireless FM Modulator, that allows you to listen to the VOD1221 audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter buttons on the remote (ON/OFF, Channel Select) or the FM Select button on the unit. Whenever the FM modulator is on, broadcast reception on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception.

Rev. No 1.0 FCC Part 15 Subpart C TEST REPORT of E.U.T. : 12” Overhead LCD TV/Monitor With DVD Player FCC ID. : ATI9R3VOD1221 MODEL : VOD1221, VOD1221P, VOD1221S, ADV450, ADV450S, & ADV450P Working Frequency : 88.3~89.9 MHz for APPLICANT : ACTION ELECTRONICS CO., LTD. ADDRESS : 198, Chung Yuan Rd., Chung Li Ind. Zone Chung Li, Tao Yuan Hsien, Taiwan, R.O.C. Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34, LIN 5, DING FU TSUN, LINKOU HSIANG, TAIPEI HSIEN, TAIWAN, R.O.C. http://www.etc.org.tw ; e-mail : [email protected] Tel:(02)26023052 Fax:(02)26010910 Report Number : ET94R-05-072-01 ETC Report No.:ET94R-05-072-01 FCC ID.: ATI9R3VOD1221 Rev. No 1.0 TEST REPORT CERTIFICATION Applicant : ACTION ELECTRONICS CO., LTD. 198, Chung Yuan Rd., Chung Li Ind. Zone Chung Li, Tao Yuan Hsien, Taiwan, R.O.C. Manufacture : ACTION INDUSTRIES (M) SDN BHD. 2480 TINGKAT PERUSAHAAN ENAM, PRAI FREE TRADE ZONE, 13600 PERAI, PENANG, MALAYSIA Description of EUT : a) Type of EUT : 12” Overhead LCD TV/Monitor With DVD Player b) Trade Name : AUDIOVOX, ADVENT, ACTION c) Model No : VOD1221, VOD1221P,VOD1221S, ADV450, ADV450S, & ADV450P d) Working Frequency : 88.3~89.9 MHz e ) Power Supply : DC 12.0V Regulation Applied : FCC Rules and Regulations Part 15 Subpart C (2005) I HEREBY CERTIFY THAT; The data shown in this report were made in accordance with the procedures given in ANSI C63.4 and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Issued Date : Jun. 06, 2005 Test Engineer : ( Jiapeng Chen ) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No.:ET94R-05-072-01 FCC ID.: ATI9R3VOD1221 Rev. No 1.0 Table of Contents Page 1. GENERAL INFORMATION .................................................................................................. 1 1.1 Product Description........................................................................................................... 1 1.2 Characteristics of Device:................................................................................................ 1 1.3 Test Methodology.............................................................................................................. 1 1.4 Test Facility......................................................................................................................... 1 2. DEFINITION AND LIMITS.................................................................................................... 2 2.1 Definition............................................................................................................................. 2 2.2 Restricted Bands of Operation........................................................................................ 2 2.3 Limitation............................................................................................................................. 2 2.4 Labeling Requirement....................................................................................................... 3 2.5 User Information................................................................................................................ 3 3. SYSTEM TEST CONFIGURATION ..................................................................................... 4 3.1 Justification.......................................................................................................................... 4 3.2 Devices for Tested System.............................................................................................. 4 4 RADIATED EMISSION MEASUREMENT.......................................................................... 5 4.1 Applicable Standard.......................................................................................................... 5 4.2 Measurement Procedure................................................................................................... 5 4.3 Measuring Instrument....................................................................................................... 7 4.4 Test Data...............................................................................................................................8 4.4.1 Fundamental Frequency ................................................................................................................................ 8 4.4.2 Other Emissions .............................................................................................................................................. 9 4.5 Field Strength Calculation............................................................................................... 9 4.6 Radiated Measurement Photos..................................................................................... 10 5 CONDUCTED EMISSION MEASUREMENT ................................................................... 11 5.1 Standard Applicable........................................................................................................ 11 6 ANTENNA REQUIREMENT ............................................................................................... 12 6.1 Standard Applicable........................................................................................................ 12 6.2 Antenna Construction..................................................................................................... 12 7 EMISSION BAND MEASUREMENT.................................................................................. 13 7.1 Standard Applicable........................................................................................................ 13 7.2 Measurement Procedure................................................................................................. 13 7.3 Measurement Equipment............................................................................................... 13 7.4 Measurement Data................…

Text truncated - open the document above for the full version.

ETC Report No.:ET94R-05-072-01 Sheet 10 of 19 Sheets FCC ID.: ATI9R3VOD1221 Rev. No 1.0 4.6 Radiated Measurement Photos