AUSCR7025ACARTER 7 IN-1 RECORD PLAYER

CR7025A Hayes 8 in 1 Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.com English 2 Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product. 5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 7. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 9. Do not use attachments not recommended by the product manufacturer as they may cause hazards. 10. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings. 12. Unplug the product during lightning storms or when unused for long periods of time. English 3 Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • 45 RPM adapter • Power adapter • RCA Cable Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power AC power adaptor, DC output 12V 2A Power consumption 22 W Speaker 3”, 8Ω 7W x 2 Turntable speed 33 1 / 3 , 45, 78 RPM Replacement needle Crosley NP-16 Frequency Range AM 520 – 1710 KHz FM 87 – 108.5 MHz Note: • Design and specifications are subject to change without notice. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, you will need to turn off the power and turn it on again. English 4 Product Description 1. Speakers 2. Dial Scale 3. Tuning Knob 4. Status Indicator 5. Play Indicator 6. Function Knob 7. Backward Skip Button 8. Headphone Jack 9. Play/Pause Button 10. Forward Skip Button 11. CD Tray 12. Stop Button 13. LED Display 14. Program Indicator 15. Repeat Indicator 16. ON/OFF Volume Knob 17. CD Door Open/Close Button 18. Aux In Jack 19. Repeat/ Program Button 20. Turntable Platter 21. Turntable Spindle 22. 45 RPM Adapter 23. Tonearm 24. Tonearm Lever 25. Auto Stop Switch 26. Speed Switch 27. Hold Down Clip 28. Tonearm Rest English 5 29. Cassette Eject/Fast Forward Button 30. Cassette Door 31. External Antenna 32. Line Out Jacks 33. Power Jack Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Connect power adaptor to the Power Jack of the unit. 4. Rotate the On/Off Volume Knob to turn unit on and off. Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting. English 6 Stereo System Connection Line Out Jacks • The Line Out Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the appropriate input of your stereo system. • The Red plug connects with the Right channel and the White plug connects with the Left channel. Note: The Line Out Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive speakers, the volume level will be very low. Aux Input Connection You can connect an audio device to this unit and play your music through its speakers. To do this, connect the 3.5mm auxiliary cable (not included) between your audio device and the Aux In Jack of this unit, set the function knob to the AUX position, and start playing the music. Note: The LED display will show “AU” Bluetooth Operation 1. Turn the Function Knob to the BT position. The status indicator will begin flashing blue. Note: The LED display will flash “bt” 2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY CR7025A” and pair. 3. Once your device is successfully paired with the unit you will hear a short confirmation sound from the unit. The status indicator will be solid blue. 4. Play and stream music from your device to the unit. 5. During the playback, press the Play/Pause button to pause and press it again to resume playback. 6. To skip to the next or previous track, press the Forward Skip or Backward Skip button correspondingly. 7. To disconnect your device, press…

Text truncated - open the document above for the full version.

Modern Marketing Concepts, Inc. Covered Equipment Certification Attestation Letter 8/28/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: AUSCR7025A Modern Marketing Concepts, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Modern Marketing Concepts, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Modern Marketing Concepts, Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Scott McWhorter Title: Director of Engineering Company Name: Modern Marketing Concepts, Inc. Date: 8/28/2025

Modern Marketing Concepts, Inc. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 8/28/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: AUSCR7025A Applicant of FRN: 0021475454 Per section 2.911(d)(7) of the FCC rules, Modern Marketing Concepts, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Modern Marketing Concepts, Inc. FCC Registration Number (FRN): 0021475454 Physical U.S. Company Address: 1220 E Oak, St., Louisville, Kentucky, United States Contact Person: Scott McWhorter Telephone Number: +1-502-212-4291 Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Signed: Signed: Printed name: Scott McWhorter Printed name: Click here to enter text. Title: Director of Engineering Title: Click here to enter text. Company Name: Modern Marketing Concepts, Inc. Company Name: Click here to enter text. Date: 8/28/2025 Date: Click here to enter a date.

Modern Marketing Concepts, Inc. DATE : 2025.8.28 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address: Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Modern Marketing Concepts, Inc. Address: 1220 E Oak, St., Louisville, Kentucky, United States (Applicant Name and address) Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

Modern Marketing Concepts, Inc. DATE : 2025.08.28 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: AUSCR7025A Product Name: CARTER 7-IN-1 RECORD PLAYER Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

Modern Marketing Concepts, Inc. I, the signer, Scott McWhorter The only differences between these models are model name. Their enclosure/form factor, internal circuitry/PCB components and hardware/software are identical. Model name difference is for market and commercial purpose. Item Name ：CARTER 7-IN-1 RECORD PLAYER Model Number: CR7025A-WA Additional Model: TT76 Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA External Photos M/N: CR7025A-WA

Internal Photos M/N: CR7025A-WA Bluetooth antenna Internal Photos M/N: CR7025A-WA Internal Photos M/N: CR7025A-WA Internal Photos M/N: CR7025A-WA Internal Photos M/N: CR7025A-WA Internal Photos M/N: CR7025A-WA Internal Photos M/N: CR7025A-WA

Page 1 of 5 Report No. ESTE-R2508145 FCC 47 CFR MPE REPORT Modern Marketing Concepts, inc HAYES 7-IN-1 RECORD PLAYER Model Number: CR7025A-WA Addition Model: CR7025A-X, CR7025X-XX(XX-XXXX.. can be replaced by letter from "A" to "Z" number from "0" to "9" or blank) FCC ID: AUSCR7025A Applicant: Modern Marketing Concepts, inc Address: 1220 East Oak Street, Louisville, Kentucky 40204 United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2508145 Date of Test: Aug. 11, 2025 ~ Aug. 22, 2025 Date of Report: Aug. 26, 2025 Page 2 of 5 Report No. ESTE-R2508145 Maximum Permissible Exposure 1. Applicable Standards Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. 1.1. Limits for Maximum Permissible Exposure (MPE) (a) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density Page 3 of 5 Report No. ESTE-R2508145 1.2. MPE Calculation Method E (V/m) = d G × P × 30 Power Density: Pd (W/m 2 ) = 377 E 2 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 d × 377 G × P × 30 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained Page 4 of 5 Report No. ESTE-R2508145 2. Conducted Power Result Mode Frequency (MHz) Peak output power (dBm) Peak output power (mW) GFSK 2402 -4.58 0.348 2441 -4.58 0.348 2480 -4.99 0.317 π/4-DQP SK 2402 -4 0.398 2441 -3.6 0.437 2480 -4.39 0.364 BLE 1M 2402 -0.17 0.962 2440 -0.03 0.993 2480 -1.01 0.793 BLE 2M 2402 -0.11 0.975 2440 0.12 1.028 2480 -0.81 0.830 Page 5 of 5 Report No. ESTE-R2508145 3. Calculated Result and Limit Mode Peak output power (dBm) Target power （dBm） MAX Target power （dBm） Antenna gain Power Density (S) (mW /cm2) Limited of Power Density (S) (mW /cm2) Test Result (dBi) (Linear) 2.4G Band GFSK -4.58 -4±1 -3 -0.58 0.875 0.00009 1 Complies π/4-DQPSK -3.60 -3±1 -2 -0.58 0.875 0.00011 1 Complies BLE 1M -0.03 0±1 1 -0.58 0.875 0.00022 1 Complies BLE 2M 0.12 0±1 1 -0.58 0.875 0.00022 1 Complies End of Test Report

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dB Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Page 1 of 56 Report No. ESTE-R2508143 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Modern Marketing Concepts, inc HAYES 7-IN-1 RECORD PLAYER Model Number: CR7025A-WA Addition Model: CR7025A-X, CR7025X-XX(XX-XXXX.. can be replaced by letter from "A" to "Z" number from "0" to "9" or blank) FCC ID: AUSCR7025A Applicant : Modern Marketing Concepts, inc Address: 1220 East Oak Street, Louisville, Kentucky 40204 United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2508143 Date of Test: Aug. 11, 2025 ~ Aug. 22, 2025 Date of Report: Aug. 26, 2025 Page 2 of 56 Report No. ESTE-R2508143 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION .......................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................... 5 1.1. Description of Device (EUT) ............................................................................................................ 5 1.2. Antenna Information ......................................................................................................................... 5 1.3. Information of RF Cable ................................................................................................................... 5 2. SUMMARY OF TEST ........................................................................................................................... 6 2.1. Summary of test result ..................................................................................................................... 6 2.2. Test Facilities ..................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................ 8 2.4. Assistant equipment used for test .................................................................................................. 8 2.5. Block Diagram ................................................................................................................................... 8 2.6. Test mode .......................................................................................................................................... 9 2.7. Channel List ..................................................................................................................................... 10 2.8. Power Setting of Test Software .................................................................................................... 10 2.9. Test Equipment ............................................................................................................................... 11 3. MAXIMUM PEAK OUTPUT POWER ................................................................................................... 13 3.1. Limit ................................................................................................................................................... 13 3.2. Test Setup ........................................................................................................................................ 13 3.3. Spectrum Analyzer Setting ............................................................................................................ 13 3.4. Test Procedure ................................................................................................................................ 13 3.5. Test Result ....................................................................................................................................... 13 4. 20 DB BANDWIDTH ......................................................................................................................... 14 4.1. Limit ................................................................................................................................................... 14 4.2. Test Setup ........................................................................................................................................ 14 4.3. Spectrum Analyzer Setting ............................................................................................................ 14 4.4. Test Procedure ................................................................................................................................ 14 4.5. Test Result ....................................................................................................................................... 14 5. CARRIER FREQUENCY SEPARATION .............................................................................................. 15 5.1. Limit ................................................................................................................................................... 15 5.2. Test Setup ........................................................................................................................................ 15 5.3. Spectrum Analyzer Setting ............................................................................................................ 15 5.4. Test Procedure ................................................................................................................................ 15 5.5. Test Result ....................................................................................................................................... 15 6. NUMBER OF HOPPING CHANNEL ................................................................................................... 16 6.1. Limit ................................................................................................................................................... 16 6.2. Test Setup ................................…

Text truncated - open the document above for the full version.

Page 1 of 34 Report No. ESTE-R2508143 Appendix A: 20dB Emission Bandwidth Test Result TestMode Antenna Frequency[MHz] 20db EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH5 Ant1 2402 0.948 2401.493 2402.441 --- --- DH5 Ant1 2441 0.954 2440.487 2441.441 --- --- DH5 Ant1 2480 0.954 2479.487 2480.441 --- --- 2DH5 Ant1 2402 1.278 2401.322 2402.600 --- --- 2DH5 Ant1 2441 1.281 2440.319 2441.600 --- --- 2DH5 Ant1 2480 1.281 2479.319 2480.600 --- --- Page 2 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-2402 DH5-Ant1-2441 DH5-Ant1-2480 Page 3 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2402 2DH5-Ant1-2441 Page 4 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2480 Page 5 of 34 Report No. ESTE-R2508143 Appendix B: Maximum conducted output power Test Result Peak Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH5 Ant1 2402 -4.58 ≤20.97 PASS DH5 Ant1 2441 -4.58 ≤20.97 PASS DH5 Ant1 2480 -4.99 ≤20.97 PASS 2DH5 Ant1 2402 -4.00 ≤20.97 PASS 2DH5 Ant1 2441 -3.60 ≤20.97 PASS 2DH5 Ant1 2480 -4.39 ≤20.97 PASS Test Graphs DH5-Ant1-2402-PASS DH5-Ant1-2441-PASS Page 6 of 34 Report No. ESTE-R2508143 DH5-Ant1-2480-PASS 2DH5-Ant1-2402-PASS Page 7 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2441-PASS 2DH5-Ant1-2480-PASS Page 8 of 34 Report No. ESTE-R2508143 Page 9 of 34 Report No. ESTE-R2508143 Appendix C: Carrier frequency separation Test Result TestMode Antenna Frequency[MHz] Result[MHz] Limit[MHz] Verdict DH5 Ant1 2402 1.074 ≥0.954 PASS DH5 Ant1 2441 1.146 ≥0.954 PASS DH5 Ant1 2480 1.014 ≥0.954 PASS 2DH5 Ant1 2402 0.993 ≥0.854 PASS 2DH5 Ant1 2441 1.191 ≥0.854 PASS 2DH5 Ant1 2480 0.882 ≥0.854 PASS Page 10 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-2402-PASS DH5-Ant1-2441-PASS DH5-Ant1-2480-PASS Page 11 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2402-PASS 2DH5-Ant1-2441-PASS Page 12 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2480-PASS Page 13 of 34 Report No. ESTE-R2508143 Appendix D: Time of occupancy Test Result TestMode Antenna Frequency[MHz] BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant1 Hop 0.372 319 0.119 ≤0.4 PASS DH3 Ant1 Hop 1.610 164 0.264 ≤0.4 PASS DH5 Ant1 Hop 2.850 118 0.336 ≤0.4 PASS 2DH1 Ant1 Hop 0.380 317 0.12 ≤0.4 PASS 2DH3 Ant1 Hop 1.620 160 0.259 ≤0.4 PASS 2DH5 Ant1 Hop 2.870 109 0.313 ≤0.4 PASS Page 14 of 34 Report No. ESTE-R2508143 Test Graphs DH1-Ant1-Hop-PASS DH3-Ant1-Hop-PASS Page 15 of 34 Report No. ESTE-R2508143 DH5-Ant1-Hop-PASS Page 16 of 34 Report No. ESTE-R2508143 2DH1-Ant1-Hop-PASS Page 17 of 34 Report No. ESTE-R2508143 2DH3-Ant1-Hop-PASS Page 18 of 34 Report No. ESTE-R2508143 2DH5-Ant1-Hop-PASS Page 19 of 34 Report No. ESTE-R2508143 Page 20 of 34 Report No. ESTE-R2508143 Appendix E: Number of hopping channels Test Result TestMode Antenna Frequency[MHz] Result[Num] Limit[Num] Verdict DH5 Ant1 Hop 79 ≥15 PASS 2DH5 Ant1 Hop 79 ≥15 PASS Page 21 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-Hop-PASS 2DH5-Ant1-Hop-PASS Page 22 of 34 Report No. ESTE-R2508143 Appendix F: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 Low 2402 -5.33 -46.85 ≤-25.33 PASS DH5 Ant1 High 2480 -5.95 -49.32 ≤-25.95 PASS DH5 Ant1 Low Hop_2402 -5.36 -48.38 ≤-25.36 PASS DH5 Ant1 High Hop_2480 -5.69 -48.5 ≤-25.69 PASS 2DH5 Ant1 Low 2402 -5.48 -46.27 ≤-25.48 PASS 2DH5 Ant1 High 2480 -6.46 -49.06 ≤-26.46 PASS 2DH5 Ant1 Low Hop_2402 -5.20 -47.13 ≤-25.2 PASS 2DH5 Ant1 High Hop_2480 -5.54 -48.54 ≤-25.54 PASS Page 23 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-2402-PASS DH5-Ant1-2480-PASS DH5-Ant1-Hop_2402-PASS Page 24 of 34 Report No. ESTE-R2508143 DH5-Ant1-Hop_2480-PASS 2DH5-Ant1-2402-PASS Page 25 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2480-PASS 2DH5-Ant1-Hop_2402-PASS Page 26 of 34 Report No. ESTE-R2508143 2DH5-Ant1-Hop_2480-PASS Page 27 of 34 Report No. ESTE-R2508143 Appendix G: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 2402 30~26500 -5.33 -42.04 ≤-25.33 PASS DH5 Ant1 2441 30~26500 -5.32 -29.18 ≤-25.32 PASS DH5 Ant1 2480 30~26500 -5.95 -41.53 ≤-25.95 PASS 2DH5 Ant1 2402 30~26500 -5.48 -31.17 ≤-25.48 PASS 2DH5 Ant1 2441 30~26500 -5.16 -42.01 ≤-25.16 PASS 2DH5 Ant1 2480 30~26500 -6.46 -41.22 ≤-26.46 PASS Page 28 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-2402-30~26500-PASS DH5-Ant1-2441-30~26500-PASS DH5-Ant1-2480-30~26500-PASS Page 29 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2402-30~26500-PASS 2DH5-Ant1-2441-30~26500-PASS Page 30 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2480-30~26500-PASS Page 31 of 34 Report No. ESTE-R2508143 Appendix H: Reference level measurement Test Result TestMode Antenna Freq(MHz) Max.Point[MHz] Result[dBm] DH5 Ant1 2402 2401.79 -5.62 DH5 Ant1 2441 2440.79 -5.32 DH5 Ant1 2480 2479.80 -5.95 2DH5 Ant1 2402 2402.12 -5.48 2DH5 Ant1 2441 2441.11 -5.16 2DH5 Ant1 2480 2479.78 -6.46 Page 32 of 34 Report No. ESTE-R2508143 Test Graphs DH5-Ant1-2402-PASS DH5-Ant1-2441-PASS DH5-Ant1-2480-PASS Page 33 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2402-PASS 2DH5-Ant1-2441-PASS Page 34 of 34 Report No. ESTE-R2508143 2DH5-Ant1-2480-PASS

Radiated emission test: Below 1GHz Radiated emission test: Above 1GHz Conducted emission test: