AYO-LSSDA428WIRELESS SAFETY, SECURITY, & RESCUE LOCATOR & ALERT

PICTURE AREA LUTECHS.COM London, ON, Canada Assembled in Canada Please keep this manual for your records and for future reference. Please register the product with the Serial Number below at www.LUTECHS.com. The Serial Number may be used for help, search or rescue. Name: Birthday: Eye Color: Body Mark(s): Address: City, etc: Phone(s): Today: Height: Weight: Today: Height: Weight: Dress/Hat/Color*: Pants/Shoes/etc*: Today: Height: Weight: Today: Height: Weight: Dress/Hat/Color*: Pants/Shoes/etc*: Today: Height: Weight: Today: Height: Weight: Dress/Hat/Color*: Pants/Shoes/etc*: (Glue Here)(Glue Here) * In case of LOSS, try to remember and write down ANY information ASAP. It is VERY IMPORTANT! Wireless Locator & Proximity Monitoring System with Two-way Alert PRODUCT OPERATIONS • The device comes with a pre-installed battery and is ready to use. • Whenever the battery is installed, it starts to work automatically. • MUTE ALARMS: If the device loses track of the paired device, au- dible alarms will be triggered. In that case, if you want to mute the alarms, you have to press the switch continuously for three (3) seconds as shown below. PRODUCT INDICATORS (Figure 3) Figure 1, insert one end first to install an “AAA” battery and the battery cover. Figure 2, press the switch continuously for 3 seconds to mute audible alarms. Distance:¼ - ½ Range* Distance:½ - ¾ Range* Distance:¾-Full Range* Distance: Out of Range* 2 1 34 5 6 8 Not Used (Black) Paired Device > +40°C Wireless Reception + 3 on 2 on 1 onOff * The exact range varies significantly depending upon how complex the environment is. Metal and concrete objects in between reduce detectable ranges significantly. Ranges in Open Areas* Ranges in Rooms* Ranges in Woods* 1 2 3 4 5 6 Distance IndicatorA paired device is within ¼ - ½ of the range.* Distance IndicatorA paired device is within ½ - ¾ of the range.* Distance IndicatorA paired device is within ¾ - the full range.* Distance IndicatorA paired device is out of detectable range.* Not Used(Black) “High” HeatA paired device is exposed to > +40°C or Its Battery LevelChange battery: 2 fast flashings with a beep. Signal ReceptionOne flashing: one good wireless reception. 7 8 7Its Own Battery Level ! ! ! ! • Off: Plenty to Run. • 1 Flashing: Medium to Low Level. Attention. • 2 Fast Flashings with a Beep: Warning Level. Change battery ASAP. (Page 1/8) (Page 3/8)(Page 4/8) (Page 2/8) AAAAAAAA Serial Number INDUSTRY CANADA COMPLIANCE STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The term “IC:” before the radio certification number listed below only signifies that Industry Canada technical specifications were met. FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Travelers: this wireless device cannot be used outside the USA and Canada because of different wireless regulations. Please visit our website to find the models that are certified to use in both regions, for example, the USA and European Union. READ THE ENTIRE MANUAL CAREFULLY - THIS AFFECTS YOUR LEGAL RIGHTS. This manual contains information on limitations regarding product use & function and information on the limitations as to liability of the manufacturer. The wireless device can be of powerful assistance to parents momentarily distracted from their children but it by no means substitutes close parental supervision and nor does it imply that. LUTECHS is not responsible for lost child or the conse- quence thereof. Changes or modifications not expressly approved by LUTECHS could void the user’s authority to operate the equipment. All the products designed and manufactured by LUTECHS comply with the RoHS Directive, which prohibits Lead (Pb), Mercury (Hg), etc. BATTERY INSTALLATION • One (1) “AAA” battery is pre-installed upon shipping. • AAA Lithium is recommended for low operating temperature as low as -40°C. • Open the battery cover using the mini Phillips screwdriver included in this package or any other appropriate tool. Keep the tiny screw in a safe place and do not lose it. • After installing a new battery, make sure to screw down the battery cover carefully. • Do NOT use excessive force to turn the screw. It will be good enough as long as the battery cover does move freely. • Please recycle the used battery. ! Audible Alarms Information Area: Please write down any information about the person to monitor, and update it frequently, for example, for a child once six months or more frequently if necessary. Patent Pending System Model: LSS-Y2443G Device Model(s): LSS-DA42-TR8 FCC ID: AYO-LSSDA428 IC: 10275A-LSSDA428 OTHER FUNCTIONS • 30 Seconds Rule: about 30 seconds (half a minute) after the au- dible alarm is muted, if the device picks up its paired device’s signals and later loses track of it again, the audible alarm will be triggered again just like the device has never been muted. For example, if a mother sends her child to school and leaves. She then has to mute the triggered alarm. After 30 seconds when she comes back to see her child and leaves again, the audible alarm will be triggered again. • Adjust the Range to Monitor: most of the time, the…

Text truncated - open the document above for the full version.

PICTURE AREA LUTECHS.COM London, ON, Canada Assembled in Canada Please keep this manual for your records and for future reference. Please register the product with the Serial Number below at www.LUTECHS.com. The Serial Number may be used for help, search or rescue. Name: Birthday: Eye Color: Body Mark(s): Address: City, etc: Phone(s): Today: Height: Weight: Asset: SN: Description: Dress/Hat/Color*: Pants/Shoes/etc*: Today: Height: Weight: Asset: SN: Description: Dress/Hat/Color*: Pants/Shoes/etc*: Today: Height: Weight: Asset: SN: Description: Dress/Hat/Color*: Pants/Shoes/etc*: (Glue Here)(Glue Here) * In case of LOSS, try to remember and write down ANY information ASAP. It is VERY IMPORTANT! Wireless Locator & Proximity Monitoring System with One-way Alert PRODUCT OPERATIONS • The device comes with a pre-installed battery and is ready to use. • Whenever the battery is installed, it starts to work automatically. • MUTE ALARMS: If the device loses track of the paired device, au- dible alarms will be triggered. In that case, if you want to mute the alarms, you have to press the switch continuously for three (3) seconds as shown below. PRODUCT INDICATORS (Figure 3) Figure 1, insert one end first to install an “AAA” battery and the battery cover. Figure 2, press the switch continuously for 3 seconds to mute audible alarms. Distance:¼ - ½ Range* Distance:½ - ¾ Range* Distance:¾-Full Range* Distance: Out of Range* 2 1 34 5 6 Remote Battery Level Ɨ Paired Device > +40°C + 3 on 2 on 1 onOff * The exact range varies significantly depending upon how complex the environment is. Metal and concrete objects in between reduce detectable ranges significantly. Ranges in Open Areas* Ranges in Rooms* Ranges in Woods* 1 2 3 4 5 6 Distance IndicatorA paired device is within ¼ - ½ of the range.* Distance IndicatorA paired device is within ½ - ¾ of the range.* Distance IndicatorA paired device is within ¾ - the full range.* Distance IndicatorA paired device is out of detectable range.* Remote Bat. LevelA paired device’s battery level by flashing. Ɨ “High” HeatA paired device is exposed to > +40°C or Its Battery LevelIts own battery level indication by flashing. Ɨ Signal ReceptionOne flashing: one good wireless reception. 7 8 7Its Own Battery Level Ɨ ! ! ! Ɨ Battery Level Indications • Off: Plenty to Run. • 1 Flashing: Medium to Low Level. Attention. • 2 Fast Flashings with a Beep: Warning Level. Change battery ASAP. (Page 1/8) (Page 3/8)(Page 4/8) (Page 2/8) AAAAAAAA Serial Number BATTERY INSTALLATION • One (1) “AAA” battery is pre-installed upon shipping. • AAA Lithium is recommended for low operating temperature as low as -40°C. • Open the battery cover using the mini Phillips screwdriver included in this package or any other appropriate tool. Keep the tiny screw in a safe place and do not lose it. • After installing a new battery, make sure to screw down the battery cover carefully. • Do NOT use excessive force to turn the screw. It will be good enough as long as the battery cover does move freely. • Please recycle the used battery. ! Audible Alarms 8Wireless Reception No Indictors Anywhere Information Area: Please write down any information about the person or valuable asset to monitor, and update it frequently, for example, for a child once six months or more frequently if necessary. INDUSTRY CANADA COMPLIANCE STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The term “IC:” before the radio certification number listed below only signifies that Industry Canada technical specifications were met. FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Travelers: this wireless device cannot be used outside the USA and Canada because of different wireless regulations. Please visit our website to find the models that are certified to use in both regions, for example, the USA and European Union. READ THE ENTIRE MANUAL CAREFULLY - THIS AFFECTS YOUR LEGAL RIGHTS. This manual contains information on limitations regarding product use & function and information on the limitations as to liability of the manufacturer. The wireless device can be of powerful assistance to parents momentarily distracted from their children but it by no means substitutes close parental supervision and nor does it imply that. LUTECHS is not responsible for lost child or asset or the consequence thereof. Changes or modifications not expressly approved by LUTECHS could void the user’s authority to operate the equipment. All the products designed and manufactured by LUTECHS comply with the RoHS Directive, which prohibits Lead (Pb), Mercury (Hg), etc. Patent Pending System Model: LSS-Y2443H Device Model(s): LSS-DA42-TX8, LSS-DA42-RX8 FCC ID: AYO-LSSDA428 IC: 10275A-LSSDA428 OTHER FUNCTIONS • 30 Seconds Rule: about 30 seconds (half a minute) after the au- dible alarm is muted, if the device picks up its paired device’s signals and later loses track of it again, the audible alarm will be triggered again just like the device has never been muted. For example, if a mother sends her child to school and leaves. She then has to mute the triggered alarm. After 30 seconds whe…

Text truncated - open the document above for the full version.

FCC Confidentiality Request Part Number: Revision: Page: 1 of 1 1711 STACKHOUSE AVE, LONDON, ON, N5X 4H9, CANADA, P: 1-(519) 266-6467, 1-(814) 861-2165 1/1 Date: April 12, 2012 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: AYO-LSSDA428 Product Name: Wireless Locator & Alert for Safety, Security and Rescue Models: LSS-DA42-TR8, LSS-DA42-RX8, LSS-DA42-TX8 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we, Lu Technologies hereby request permanently confidential treatment of information accompanying this application as outlined below: Exhibit Type Confidentiality Type File Name • Schematics Permanent LSS-DA42-XXX Schem.pdf • Parts List Permanent LSS-DA42-XXX PartsLst.pdf • Block Diagrams Permanent LSS-DA42-XXX BlockDia.pdf • Operational Description Permanent LSS-DA42-XXX OpDes.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Dated this 12 th Day of April 20 12 Sincerely, ___________________________ Dianhong Lu Owner & President Lu Technologies 1711 Stackhouse Ave. London, ON N5X 4H9 Canada +1-519-266-6467 +1-814-861-2165

FCC / IC Label Part Number: 2012041203T Revision: 02 Page: 1 of 3 1711 STACKHOUSE AVE, LONDON, ON, N5X 4H9, CANADA, P: 1-(519) 266-6467, 1-(814) 861-2165 1/3 Title: FCC/IC Labels for Three Models: LSS-DA42-TR8 (-TX8, -RX8) Release:2012/06/04,DL Model Number: LSS-DA42-TR8 IC: 10275A-LSSDA428 FCC ID: AYO-LSSDA428 Notes: 1. Cutting Tolerance: +/- 0.010" 2. Corner Radius: 0.006" (0.010" radius or square corners are acceptable) 3. All materials must be Lead-free RoHS Compliant Shown 400% of Actual Size Shown 400% of Actual Size Actual Size Actual Size The label goes there FCC / IC Label Part Number: 2012041203T Revision: 02 Page: 2 of 3 1711 STACKHOUSE AVE, LONDON, ON, N5X 4H9, CANADA, P: 1-(519) 266-6467, 1-(814) 861-2165 2/3 Model Number: LSS-DA42-TX8 IC: 10275A-LSSDA428 FCC ID: AYO-LSSDA428 Notes: 1. Cutting Tolerance: +/- 0.010" 2. Corner Radius: 0.006" (0.010" radius or square corners are acceptable) 3. All materials must be Lead-free RoHS Compliant Shown 400% of Actual Size Shown 400% of Actual Size Actual Size Actual Size The label goes there FCC / IC Label Part Number: 2012041203T Revision: 02 Page: 3 of 3 1711 STACKHOUSE AVE, LONDON, ON, N5X 4H9, CANADA, P: 1-(519) 266-6467, 1-(814) 861-2165 3/3 Model Number: LSS-DA42-RX8 IC: 10275A-LSSDA428 FCC ID: AYO-LSSDA428 Notes: 1. Cutting Tolerance: +/- 0.010" 2. Corner Radius: 0.006" (0.010" radius or square corners are acceptable) 3. All materials must be Lead-free RoHS Compliant Shown 400% of Actual Size Shown 400% of Actual Size Actual Size Actual Size The label goes there

LAB REGISTRATION #6844A-2 FCC REGISTRATION #612361 Testing Laboratory Certificate #2555.01 Page 1 of 60 Report issue date: 5/24/2012 GEMC File #: GEMC-FCC-20777R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. This report is based on GEMC Template “FCC 15 231 Rev1.” Global EMC Inc. Labs EMC & RF Test Report As per RSS 210 Issue 8:2010 & FCC Part 15 Subpart C:2010 Unlicensed Intentional Radiators on the Wireless Locator & Alert for Safety, Security and Rescue Models LSS-DA42-TR8, LSS-DA42-RX8, & LSS-DA42-TX8 Raymond Lee Au Project Engineer Global EMC Inc. 180 Brodie Drive, Unit 2 Richmond Hill, ON, L4B 3K8 Canada Ph: (905) 883-8189 Testing produced for See Appendix A for full customer & EUT details. Client Lu Technologies Product Wireless Locator & Alert for Safety, Security and Rescue (LSS-DA42-TR8, LSS-DA42-RX8, LSS-DA42-TX8) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 2 of 60 Report issue date: 5/24/2012 GEMC File #: GEMC-FCC-20777R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Justifications, Descriptions, or Deviations......................................................................... 6 Applicable Standards, Specifications and Methods ........................................................... 7 Sample calculation(s) ......................................................................................................... 8 Document Revision Status ................................................................................................. 8 Definitions and Acronyms ..................................................................................................... 9 Testing Facility .................................................................................................................... 10 Calibrations and Accreditations ....................................................................................... 10 Testing Environmental Conditions and Dates ................................................................. 11 Detailed Test Results Section .............................................................................................. 12 Radiated Emissions of Fundamental ................................................................................ 13 Radiated Emissions of Spurious Emissions ..................................................................... 18 20 dB Bandwidth of Periodically Operated Transmitters ................................................ 37 Radiated Emissions of Receiver ...................................................................................... 40 Appendix A – EUT Summary .............................................................................................. 51 Appendix B – EUT and Test Setup Photographs................................................................. 53 Client Lu Technologies Product Wireless Locator & Alert for Safety, Security and Rescue (LSS-DA42-TR8, LSS-DA42-RX8, LSS-DA42-TX8) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 3 of 60 Report issue date: 5/24/2012 GEMC File #: GEMC-FCC-20777R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Report Scope This report addresses the EMC verification testing and test results of the Wireless Locator & Alert for Safety, Security and Rescue, models LSS-DA42-TR8, LSS-DA42-RX8, and LSS-DA42-TX8, from Lu Technologies, performed at Global EMC Labs. These units are herein referred to as EUT (Equipment Under Test). The LSS-DA42-TR8 is the transceiver in full mode. The LSS-DA42-RX8 is the transceiver in receiver mode only, and the LSS- DA42-TX8 is the transceiver in transmitter mode only The EUT was tested for compliance against the following standards: RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. The results contained in this report relate only to the item(s) tested. This report does not imply product endorsement by A2LA or any other accreditation agency, any government, or Global EMC Inc. Opinions/interpretations expressed in this report, if any, are outside the scope of Global EMC Inc accreditation. Any opinions expressed do not necessarily reflect the opinions of Global EMC Inc, unless otherwise stated. Client Lu Technologies Product Wireless Locator & Alert for Safety, Security and Rescue (LSS-DA42-TR8, LSS-DA42-RX8, LSS-DA42-TX8) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 4 of 60 Report issue date: 5/24/2012 GEMC File #: GEMC-FCC-20777R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Summary The results contained in this report relate only to the item(s) tested. EUT FCC Certification #, FCC ID: AYO-LSSDA428 EUT Industry Canada Certification #, IC: 10275A-LSSDA428 EUT Passed all tests performed. Yes (see test results summary) Tests conducted by Raymond Lee Au Client Lu Technologies Product Wireless Locator & Alert for Safety, Security and Rescue (LSS-DA42-TR8, LSS-DA42-RX8, LSS-DA42-TX8) Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2010 Page 5 of 60 Report issue date: 5/24/2012 GEMC File #: GEMC-FCC-20777R1 © Gl…

Text truncated - open the document above for the full version.

Radiated emissions testing (less than 30MHz) Radiated emissions testing (greater than 30MHz)