AZZ313011hAppy Print

hAppy ™ QUICK START GUIDE PRINT Congratulations on your new ZINK hAppy Print ™ —the world’s first smart, happy, little, full-color, zero-ink, app-powered printer. In this guide we’ll get you designing and printing in no time. If you have any questions, call us at 877-711-ZINK or visit us online at zink.com. 3 What’s in the Box hAppy Print ™ Power Adapter Cleaning zRoll USB Cable 1 / 2h " zRoll ™ 4 zRoll Loading Slot Get to Know Your hAppy Print ™ zRoll Unlock Button Power Button Micro USB port Wi-Fi Button Print output slot Swipe-to-cut 5 • Flashing white when cassette is unlocked or there is no cassette detected • Solid white when cassette is locked and ready to print Swipe-to-Cut Lights flash left to right when ready to cut Wi-Fi Button Tap to switch between broadcast mode (white) and Wi-Fi connect mode (blue) zRoll Unlock Button • Flashing white: searching for device network • Solid white: Wi-Fi is broadcasting and ready to be connected with an iPad or tablet • Solid blue: connected to home network • Flashing blue: searching for your home network 6 What You Need AND OR hAppy Print ™ Power Adapter 1 / 2 " zRoll High-speed Internet Wireless Router (Wi-Fi) Android smartphone or iPhone Android tablet or iPad 7 OR If you have an iPhone or an iPad: just tap the App Store icon and search the store for ZINK Design & Print Studio. If you have an Android phone or Android tablet: tap the Google Play or Play Store button and search for ZINK Design & Print Studio. STEP 1 Download the ZINK Design & Print Studio ™ App 1. Take out your tablet or smartphone. 1. Tap the App Store or Google Play icon. 2. In the search box type in ZINK Design & Print Studio. 3. Look for the hAppy ™ icon and tap to download. You can just scan the QR code. ZINK Design & Print Studio 8 1. Insert the power adapter into the port on the underside of your hAppy Print. 3. Press the power button located on the bottom corner of your hAppy— wait for your hAppy to whir up. STEP 2 Plug In and Power On Your hAppy Print 2. Connect the two sections of the power adapter and plug it into a wall outlet. Run cord under notches inside groove. Wi-Fi: should be solid white 9 STEP 3 Load Your zRoll R R 1. Unpack and remove the pull-tab from the top of the zRoll. 2. Hold your zRoll by the two finger grips on each side and insert it into the back of your hAppy Print. 3. Line up the V-shaped ridge on your zRoll with the notch on your hAppy Print—press the zRoll until you hear a slight click. Finger grip Pull-tab 10 1. Take out your tablet or smartphone. 2. Tap the settings icon on you smartphone or tablet. It's usually found in the app tray of the device. 3. Go to Wi-Fi settings and select the “hAppyPrinter” wireless network. STEP 4 Connect Your Smart Device to Your hAppy 11 STEP 5 Connect Your hAppy to Your Home Network 1. Tap the ZINK Design & Print Studio app. 2. Tap "Setup my hAppy Print." 3. Follow the on-screen instructions.(waiting for a wireframe/ graphic) 12 1/2” WELCOME NEW DESIGNZINK® STORELIBRARY SETTINGS APPSHELP ZINK STUDIO DESIGN&PRINT Library BROWSE THE ELEMENTS ZINK STUDIO FONTSBACKGROUNDSARTPHOTOSFRAMES DESIGNS HOME STORE 1/2” 1. Tap the Library button2. Tap the Art button STEP 6 Start Printing from the ZINK Design & Print Studio Stuck? Remember that you can always tap the “I” (icon here) in the upper left corner of the app to get some help. 13 3. Tap the Print button in the lower left corner of your screen. 4. Swipe-to-cut Congratulations! You’ve printed your first design. Ancient Warriors Birthday Party 2 NOTE: final illo will have print icon underneath finger and icons at top 14 TIPS HARDWARE • Make sure you’re ready to print. You’re ready to print to your hAppy from your home wire- less network when your hAppy’s Wi-Fi button is solid blue and the zRoll eject button is solid white and your smartphone or tablet is on the same wireless network as your hAppy. • Make sure your zRoll is inserted correctly. Your zRoll is positioned correctly when you hear a light “click” as you hold the zRoll by the side grips and position it into the back of your hAppy. • Clean your hAppy. Insert your white cleaning zRoll into your hAppy after every ten or so prints to keep your hAppy clean and printing well. You can’t print to a cleaning zRoll, so be sure to swap it out when you are ready to print. • Your hAppy has two Wi-Fi modes. When the WiFi button is white, your hAppy is broadcast- ing a Wi-Fi network for your tablet or smartphone to connect to. When the Wi-Fi button is blue, your hAppy is connected to your home wireless network. • Print from your computer. You can connect your hAppy PRINT to your computer with the included USB cable. For more information on how to print to your hAppy from your computer, visit zink.com/support. 15 TIPS SOFTWARE • Tap those buttons. The ZINK Design & Print Studio is designed to be easy and intuitive. Tap around and see what happens. We promise you can’t break anything! • Tap to learn. Press the green “i” (put icon here) in the upper left corner of the app at anytime to learn about each function of the screen you are on. • You never have to save. The ZINK Design and Print Studio automatically saves your design each step of the way. You never have to remember to save your designs or worry about losing them! • Tap to approve. When you want to approve an action, you can just tap the green approve button on the lower right side of the screen. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Label Location Requirement of PRIMAX Part: 1. Comply with PRIMAX QW-5Q002 "Green Product Chemical Substances Specification" 2. Follow customer's specification as required. 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if r equired. +0 -0.2 Printer-BaseLabel for Wedge Zink eve.wang 0

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

Report No.: SA120830D03 1 Report Format Version 5.0.0 RF EXPOSURE REPORT Report No.: SA120830D03 MODEL NO.: Print FCC ID: AZZ313011 RECEIVED: Aug. 30, 2012 TESTED: Aug. 30 ~ Sep. 7, 2012 ISSUED: Nov. 28, 2012 APPLICANT: ZINK IMAGING, INC. ADDRESS: 16 Crosby Drive Bedford, MA 01730 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA120830D03 2 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................. 3 1. CERTIFICATION ........................................................................................... 4 2. RF EXPOSURE LIMIT ................................................................................... 5 3. MPE CALCULATION FORMULA .................................................................. 5 4. CLASSIFICATION ......................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................ 6 Report No.: SA120830D03 3 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120830D03 Original release Nov. 28, 2012 Report No.: SA120830D03 4 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: hAppy Print MODEL NO.: Print BRAND NAME: ZINK APPLICANT: ZINK IMAGING, INC. TESTED: Aug. 30 ~ Sep. 7, 2012 TEST ITEM: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov. 28, 2012 ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: Nov. 28, 2012 ( Ken Liu / Manager ) Report No.: SA120830D03 5 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120830D03 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 22.6 2.87 20 0.0701 1.00 --- END ---

Report No.: RF120830D03 1 of 49 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120830D03 MODEL NO.: Print FCC ID: AZZ313011 RECEIVED: Aug. 30, 2012 TESTED: Aug. 30 ~ Sep. 7, 2012 ISSUED: Nov. 28, 2012 APPLICANT: ZINK IMAGING, INC. ADDRESS: 16 Crosby Drive Bedford, MA 01730 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120830D03 2 of 49 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................ 4 1. CERTIFICATION ............................................................................................. 5 2. SUMMARY OF TEST RESULTS ..................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................. 6 3. GENERAL INFORMATION ............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 7 3.2 DESCRIPTION OF TEST MODES .................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................ 10 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................... 12 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 13 4. TEST TYPES AND RESULTS ....................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................ 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ..... 14 4.1.2 TEST INSTRUMENTS .................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 16 4.1.5 TEST SETUP ................................................................................................ 17 4.1.6 EUT OPERATING CONDITIONS .................................................................. 17 4.1.7 TEST RESULTS ............................................................................................ 18 4.2 CONDUCTED EMISSION MEASUREMENT ................................................ 31 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................. 31 4.2.2 TEST INSTRUMENTS .................................................................................. 31 4.2.3 TEST PROCEDURES ................................................................................... 32 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 32 4.2.5 TEST SETUP ................................................................................................ 32 4.2.6 EUT OPERATING CONDITIONS .................................................................. 32 4.2.7 TEST RESULTS ............................................................................................ 33 4.3 6DB BANDWIDTH MEASUREMENT ............................................................ 35 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ......................................... 35 4.3.2 TEST SETUP ................................................................................................ 35 4.3.3 TEST INSTRUMENTS .................................................................................. 35 4.3.4 TEST PROCEDURE ..................................................................................... 35 4.3.5 DEVIATION FROM TEST STANDARD ......................................................... 35 4.3.6 EUT OPERATING CONDITIONS .................................................................. 35 4.3.7 TEST RESULTS ............................................................................................ 36 4.4 CONDUCTED OUTPUT POWER ................................................................. 37 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .................. 37 4.4.2 TEST SETUP ................................................................................................ 37 4.4.3 TEST INSTRUMENTS .................................................................................. 37 4.4.4 TEST PROCEDURES .....................................................…

Text truncated - open the document above for the full version.

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST