B4Z-779EPIRWireless Outdoor Motion Detector

© 2012 UTC Fire & Security. All rights reserved. 1 / 7 P/1‡REV 2.‡ISS 19APR12 TX-2810-01-4 Wireless Outdoor PIR 319.5MHz Detector Installation Sheet EN DE ES FR IT NL PL PT SV 1 2 3 4 5 6 2 / 7 P/1‡REV 2.‡ISS 19APR12 7 8 9 10 11 12 13 14 0 1.5 3 4.5 6 7.5 9 10m 0 5 10 15 20 25 30 33ft. P/1‡REV 2.‡ISS 19APR12 3 / 7 15 16 17 EN: Installation Sheet Package The package contai ns: ‡ 1 x Wireless Detector ‡ 1 x drilling template for fixing holes ‡ 2 x 31.75 mm / 1.25 in. wall plugs ‡ 2 x 31.75 mm / 1.25 in. screws ‡ 1 x lens mask ‡ 2 x additional curtain shutters ‡ 1 x tamper cup ‡ 2 x tamper caps (different lengths) ‡ 1 x plastic locking tool ‡ 1 x installation sheet ‡ 1 x front cover screw cap Introduction The Wireless Outdoor PIR 319.5MHz Detector or is an outdoor motion detector and alarm trigger that uses two independent passive infrared detectors. ‡ 2 x 3V Lithium CR123 batteries 1 2 4 / 7 Both sensors must trigger to cause the detector to signal an alarm. The Detector uses quad PIR technology to deliver precise, reliable presence detection. Programmable options include a variable pulse count and a choice of three detection ranges: 10 m / 33 ft., 20 m / 66 ft., and 30 m / 98 ft. The integral dual-axis tilt sensor allows 180° of pan and 90° of tilt. This increases the speed of the outdoor in stallation and provides incredibly accurate aiming of the detection pattern. The electronics module is acrylic coated for additional component stability. It is encased in a vandal-resistant, high- impact, UV stabilized pl astic housing with an opaque polyethylene fr ont cover ensuring that the sensor is impervious to and unaffected by weather condit ions. The combination of precision electronics, digit al white light filtering, and double shielding eliminates false alarms from the sun and other visible light sources. The Detector design has a neat and professional appearance that gives no visible indication of the orientation of the detector head and totally hides t he wiring. Quick installation 1. Mount and connect t he detector following the instructions given later in this sheet. 2. The detection LED (blue) flashes three times. 3. Wait approximately 2 to 3 minutes to allow the detector to settle. 4. Press the programming button once t o activate walk test mode. The detection LED is now enabled for five minutes. Note: The front cover must be fitted when walk testing. The default settings are: ‡ Range: 30 meters / 98 feet ‡ Pulse count: 1 Mounting the unit During installation, protect the electronics against water, as trapped moisture can affect or damage the unit. To mount the detector: 1. Drill the wall to accept t he two fixing screws and the tamper cup (if used). See Figures 1 and 3. A hole-drilling template is provided. Notes ‡ Leave a minimum 10 cm (4 in ches) clearance above the top of the detector housing to allow the cover and the detector to be positioned correctly. ‡ We recommend usi ng the tamper cup on uneven wall surfaces. ‡ The recommended optimum mounting height for the detector is 3 m. Whilst it is possible to mount the unit higher, this will give a reduced detection range and will require the detection subject to move further through the already reduced detection area before an activation is signalled. 2. Remove the cover assembly by loosening the locking screw. Squeeze the sides of t he fr ont cover to release the internal catches. The cover hinges from the top and lifts out of the location slot. See Figure 2. 3. Screw the unit to the wall ensuring that the tamper pin is correctly located and that the tamper microswitch is closed. To aid installation, two spare different length tamper The tamper foot is a push fit and can be removed by carefully pulling it from the pin. See Figure 1. 4. When the detector is aligned, connected, and programmed to suit t he installat ion: a. Fit the cover to the detector base. b. Lightly screw the locking screw using a star screwdriver. c. Put the top of the locking to ol into the small notch on each si de of the cover, and then apply slight pressure until the cover locks into the base, as shown in Figure 17. d. Tighten the locking screw. Fitting the Batteries Multibeam alignment and masking The multif unction le ns fitted to the detector produces seven long-range beams and seven medium- to short-range curtain PIR beams. The PIR circuitry detects changes in heat and movement in the beam pattern; t herefore items such as trees, shrubs, ponds, boiler fl ues, and animals should be considered when positioning the detector. Battery Only use battery type 3V Lithium CR123 (x 2 provided) This will provide 3 years operation under normal conditions. For extended battery life a 3rd battery can be fitted into the rear of the TX board, See Fig 5. Observe correct polarity when fitting. Battery safety information Do not dispose of in a fire Do not heat Do not charge Do not short circuit Do not disassemble Only replace with same type and voltage feet are provided. Fit the 2x CR123 batteries provided into the top battery case. Observe correct polarity. See Fig 4. P/1‡REV 2.‡ISS 19APR12 P/1‡REV 2.‡ISS 19APR12 5 / 7 Note: PIR sensor is more sensitive to a movement across the beams, and less sensitive to a movement directly towards or away from the beams. The detector module is fitted with two sliding shutters to reduce the detection angle. The curtains are fitted to the pan and tilt module as shown in Figure 6. Each section of the detector lens gives a coverage pattern of approximately 10 degrees. An additional set of curtain sliders is provided should the beam pattern be narrowed even further, e.g. if the minimum detection angle of 10 degrees is required. When coverage exceeds the desired detection ar ea, adjust the module as required and mask off any beams, either vertically or horizontally, to avoid unwanted detection. Use portions of the self-adhesive silver mask appl…

Text truncated - open the document above for the full version.

GE Security. Add: 1275 Red Fox RoadArden Hills, MN 55112-6943, United States Tel: 777-1415 4824 Fax: 651-779-4884 Authorization Letter 2012-06-15 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD Dear Sir/Madam, We , GE Security. hereby authorize UTC Fire & Security Americas Corporation, Inc. . to use the following FRN Number(s): FRN Number: 0005832522 We affirm that between GE Security and UTC Fire & Security Americas Corporation, Inc., any difference in understanding, all relevant procedures and processes have been resolved, At the same time we are in the same company, just different Business Name. Sincerely, Mr Rickey P Conner / President Company Name: GE Security. Address: 3706 West Street, Landover, MD 20785, USA Tel: 777-1415 4824 Fax: 651-779-4884 E-Mail:[email protected]

Confidentiality Request Letter UTC Fire & Security Americas Corporation, Inc. Add: 1275 Red Fox Road, Arden Hills, MN 55112-6943, USA Tel: 651-779-4824 Fax: 651-779-4884 2012-05-24 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: B4Z-779EPIR We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Rick Conner / Regulatory Compliance Leader Contact information / address : 1275 Red Fox Road, Arden Hills, MN 55112-6943, USA Tel: 651-779-4824 Fax: 651-779-4884 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Fig.3 Fig.4 Button

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size: 6.0cm(L)x3.0cm(W) Label Location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 5 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 5 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 5 Fig.5 Fig.6 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 5 Fig.7 Fig.8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 5 Fig.8 Fig.9

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 23 FCC CFR47 PART 15 SUBPART C CERTIFICATION TEST REPORT For UTC Fire & Security Americas Corporation, Inc. Wireless Outdoor Motion Detector Model No.: TX-2810-01-04 Prepared for : UTC Fire & Security Americas Corporation, Inc. Address : 1275 Red Fox Road, Arden Hills, MN 55112-6943, USA Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1F., Xingyuan Industrial Park, Tongda Road, Bao’an Blvd., Bao’an District, Shenzhen, Guangdong, China Date of receipt of test sample : May 02, 2012 Number of tested samples : 1 Serial number : Prototype Date of Test : May 02, 2012 – May 17, 2012 Date of Report : May 17, 2012 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 23 TEST REPORT FCC CFR 47 PART 15 C(15.231) Report Reference No. .............. : LCS120502004TF Date of Issue ................................ : May 17, 2012 Testing Laboratory Name ......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................ : 1F., Xingyuan Industrial Park, Tongda Road, Bao’an Blvd., Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure........ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name....................... : UTC Fire & Security Americas Corporation, Inc. Address ........................................ : 1275 Red Fox Road, Arden Hills, MN 55112-6943, USA Test Specification Standard ....................................... : FCC CFR 47 PART 15 Subpart C, ANSI C63.4-2003 Test Report Form No................. : LCSEMC-1.0 TRF Originator ............................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ............... : Wireless Outdoor Motion Detector Trade Mark .................................. : N/A Manufacturer................................ : GJD Manufacturing Limited Model/ Type reference................. : TX-2810-01-04 Ratings ......................................... : Input: DC 3V, Current: 30mA Result ......................................... : Positive Compiled by: Supervised by: Approved by: Ada Liang / File administrators Vito Cao/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 23 EMC -- TEST REPORT Test Result: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS120502004TF May 17, 2012 Date of issue Type / Model........................... : TX-2810-01-04 EUT......................................... : Wireless Outdoor Motion Detector Applicant............................... : UTC Fire & Security Americas Corporation, Inc. Address.................................. : 1275 Red Fox Road, Arden Hills, MN 55112-6943, USA Telephone............................... : / Fax.......................................... : / Manufacturer........................ : GJD Manufacturing Limited Address................................... : Unit2, Birch Industrial Estate, Whittle Lane Heywood, OL 10 2SX, United Kingdom Telephone............................... : / Fax.......................................... : / Factory................................... : GJD Manufacturing Limited Address................................... : Unit2, Birch Industrial Estate, Whittle Lane Heywood, OL 10 2SX, United Kingdom Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 23 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................. 5 1.1. DESCRIPTION OF DEVICE (EUT) ...........................................................................................................................5 1.2. OBJECTIVE............................................................................................................................................................ 5 1.3. HOST SYSTEM CONFIGURATION LIST AND DETAILS............................................................................................. 5 1.4. EUT INTERFACE PORTS........................................................................................................................................ 5 1.5. EUT OPERATION.................................................................................................................................................. 6 1.6. ANTENNA SYSTEM.............................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: B4Z-779EPIR Report No.: LCS120502004TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emission Measurement Fig.1 Fig.2