B4Z-785B-ALGROSecurity Panel

8660g10a.dsf Contents D†‡hyyh‡v‚ D†‡…ˆp‡v‚† Preliminary 2/5/02 About This Manual ............................................................ 1 Special Installation Requirements ..................................... 1 UL Listed Systems ..................................................... 1 Basic System ......................................................... 1 Household Burglary Alarm System Unit (UL 1023) ...................................................... 1 Household Fire Warning System (UL 985) ........... 1 Digital Alarm Communicator System (UL 1635) . 1 Central Station Reporting ...................................... 1 UL-Canada Listed Systems ........................................ 1 California State Fire Marshall Listed Systems ........... 1 Planning the Installation .................................................... 1 Standard System ......................................................... 1 Panel ...................................................................... 1 DTIM ..................................................................... 1 Additional System Components ............................ 2 Installing the System ......................................................... 2 Determine the Panel Location .................................... 2 Mounting the Panel .................................................... 2 Connecting Detection Devices to Panel Zone Inputs . 3 Connecting Intrusion Detection Devices ............... 3 Connecting the AC Power Transformer ..................... 3 Connecting the Backup Battery Pack ......................... 3 Powering Up the Panel ............................................... 4 Programming the Panel ..................................................... 4 Panel Keypad Button Programming Functions .......... 4 Moving Through Program Mode Tiers and Menus .................................................................. 4 Installer Programing Menu Items ............................... 4 Entering Installer Programming Mode .................. 4 Clearing Memory .................................................. 5 Learning the DTIM into the Panel ........................ 5 Account Menu ....................................................... 5 Account ............................................................ 5 Phones Menu ......................................................... 5 Number 1 and 2 ................................................ 5 FMT - CID ....................................................... 6 High Lvl ........................................................... 6 Low Lvl ............................................................ 6 Openings .......................................................... 6 Closings ............................................................ 6 Backup .............................................................. 6 Dial Dly ............................................................ 6 Pre-Dial String.................................................. 7 DTMF Dial ...................................................... 7 Devices ..................................................................7 Add .................................................................. 7 Delete ............................................................... 7 Review ............................................................. 8 Text .................................................................. 8 Downloader ...........................................................9 Number ............................................................. 9 DL Code ........................................................... 9 Codes .................................................................... 9 Install Code....................................................... 9 Dealer Code ...................................................... 9 Duress Code ..................................................... 9 Apartment Manager ......................................... 9 Timers ..................................................................10 Entry Dly ........................................................ 10 Exit Dly .......................................................... 10 Phone Test Frequency..................................... 10 Next Phone Test ............................................. 10 Sleepy Time .................................................... 10 Sleep Hour ...................................................... 10 Options ................................................................10 KTP Arm ........................................................ 10 Police Panic ................................................... 10 Emergency Panic ........................................... 11 Fire Panic ....................................................... 11 Rcvr Trouble................................................... 11 Panel Tamper .................................................. 11 Exit Ext ........................................................... 11 Swinger Shutdown ......................................... 11 Quick Arm ...................................................... 11 Quick Exit....................................................... 12 Auto Stay Arm................................................ 12 Supv Time....................................................... 12 Alarm Verify ................................................... 12 Demo Kit ........................................................ 13 Zones ..............................................................13 Reports .................................................................13 AC Fail ........................................................... 13 Low CPU Battery ........................................... 13 Phone Test ...................................................... 13 Auto Phone Test ............................................. 14 Siren .....................................................................14 S…

Text truncated - open the document above for the full version.

Interactive Technologies Inc 02/05/02 7:55 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\BLOCK.DOC EXHIBIT C Block Diagram of Product Microcontroller Siren Hardwire zone input LCD Display Keypad 106.5MHz osc RF Amp Front End Amp Mixer Detector Filter L.O. 308.8M Hz antenna antenna

Interactive Technologies Inc 02/05/02 7:56 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\extern.DOC EXHIBIT B External Photographs

Interactive Technologies Inc 02/05/02 7:56 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\id_label.DOC EXHIBIT A ID Label / Location

Interactive Technologies Inc 02/20/02 10:52 AM FCC ID: B4Z-785B-ALGRO W:\iti2vol2\PRJ\DEG\ACTIVE\60-874-95R Allegro\Approvals-Listings-Technical File\FCC\Part 15 Submittle\peices\id_label.DOC EXHIBIT A ID Label / Location

Interactive Technologies Inc 02/05/02 7:56 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\intern.DOC EXHIBIT H Internal Photographs

Interactive Technologies Inc 02/05/02 7:56 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\OP_DESC.doc Product Description Allegro is a self-contained security system that includes a keypad, LCD display, hardwire zone input, siren, receiver and transmitter. The keypad and display are for user control and feedback. The hardwire zone input works in conjunction with common magnetic contacts. The RF receiver is used to monitor any of several sensor/transmitter products. These sensors may indicate the states of doors, windows, or whether or not a smoke detector is tripped. The siren is a piezo type that can give status beeps or sound full volume tones in the event of an alarm. The Allegro can also report an alarm event to a telephone interface module using its transmitter. Because the RF link between the Allegro and the telephone interface is critical to system operation, the Allegro transmits a supervision signal every minute in accordance with 15.231(e). Included in the test report are emission measurements for the alarm transmissions under 15.231(a) designated as “High Power Transmit Mode” and one-minute supervision messages under 15.231(e) designated as “Low Power Transmit Mode.” The microcontroller used is Mitsubishi 3822. The RF transmitter is a 106.5 MHz oscillator. The third harmonic is filtered off and fed into an amplifier. The amplifier is turned on and off to modulate the carrier. The transmission frequency is 319.5MHz. The receiver receives 319.5MHz. EXHIBIT I Operational Description

52785A.sch-1 - Wed Feb 21 11:54:09 2001

Interactive Technologies Inc 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 1 of 24 C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\FCC_REPT.DOC Interactive Technologies, Inc. ALLEGRO Security Control Panel B4Z-785B-ALGRO Certification Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 2 of 24 ALLEGRO Security Control Panel B4Z-785B-ALGRO 2/5/2002 Interactive Technologies, Inc. 2266 North Second Street North Saint Paul, MN 55109 (651) 777-2690 Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 3 of 24 1. INTRODUCTION4 2. STATEMENT OF COMPLIANCE4 3. LAB MEASUREMENTS DISCUSSION / TEST NOTES7 3.1 Test Notes7 3.1.1 Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ]7 3.1.2 Supervisory Calculation [ §15.231(a)(3) ]9 3.1.3 Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]9 3.1.4 Bandwidth Measurement [ §15.231(c) ]12 3.1.5 Emissions Measurements16 3.1.5.1 Radiated Emissions Summary16 3.1.5.2 FCC Emissions Calculation16 3.1.5.2.1 Terms16 3.1.5.2.2 Example Calculation17 3.1.5.3 Radiated Emissions17 3.1.5.4 Forbidden Bands17 Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 4 of 24 1. Introduction This device is a wireless Control Panel with a transmitter for use in a wireless security system. The unit is self-contained and powered by an 8VAC Class 2 transformer, and four 1.2V Ni-Cad batteries, used as a back up power supply. The transmitter’s frequency is crystal controlled and is not adjustable by the user. The device measures approximately 3.75” in width, 1.72” in depth and 7.75′′ in height. The unit weighs approximately 8 ounces without batteries. We are requesting Certification under FCC Rules, Part 15, Subpart C, Paragraph 15.231. Please send comments/suggestions on the report format to: [email protected]. 2. Statement of Compliance §2.907Certification This is an application for certification §2.911Application a)This is an application and has been filed electronically with form 731. b)All information required has been supplied. c)The applicant has signed the application (electronically). d)The technical data has been signed. (See Radiated Emissions) e)Applicant signature block on electronic form 731 completed by officer of the company or authorized company personnel. f) The appropriate fee has been paid electronically with VISA on 2/5/02. §2.915Grant This application demonstrates that all applicable technical standards have been met and a grant of this application will serve the public interest. §2.925Label Each piece of equipment for which authorization will be granted will be uniquely identified with “FCC ID: B4Z-785B-ALGRO.” The required statement will appear with the FCC ID on the product and, although not required, in the installation instructions. See Exhibit A, PDF file id_label.pdf Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 5 of 24 §2.947Measurement Procedure a)The measurement procedure follows ANSI C63.4 procedure. Procedural notes are contained in the laboratory report. d)A list of test equipment used is contained in the laboratory report. §2.948Description of Measurement Facilities Measurements were performed at TUV Testing Services Open Test Site. The FCC keeps a full description of the measurement facilities on file. TUV’s acceptance and approval is dated as December 5, 1993 in a letter received from the FCC. The address of the test facility is: TUV Product Service 19035 Wild Mountain Road Taylors Falls, MN 55084-1758 Phone: 651-638-0297 Contact:Joel Schneider Test Engineer in Charge See Exhibit F, PDF file test_pho.pdf for sketch of measurement setup §2.1033Application for Certification a)Form 731 has been electronically filed on 2/5/02. Items that did not apply were left blank. b)This technical report contains the following information where applicable. 1)Full name and mailing address of manufacturer and applicant for certification: Interactive Technologies Inc 2266 North Second Street North Saint Paul, MN 55109 2)FCC Identifier: B4Z-785B-ALGRO 3)Copy of installation instructions: See Exhibit G, PDF file: user_man.pdf 4)Brief Description of circuit functions and device operation: See Exhibit I, PDF file op_desc.pdf Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 6 of 24 See Exhibit D, PDF file schemat.pdf for schematics (page 1) and parts placement (page 2) diagrams. 5) Block Diagram See Exhibit C, PDF file block.pdf. 6)Report of the measurements of radiation and conducted emissions: This document. 7)Photographs External: See Exhibit B, PDF file extern.pdf Internal: See Exhibit H, PDF file intern.pdf 8)Peripheral or Accessory devices: This is not applicable since this device is stand-a- lone product. 9) Transition Rules This application is not pursuant to the transition rules of §15.37 10)Emergency Broadcast decoding: This is not applicable to device in this application. 11)Application for direct sequence spread spectrum devices... This is not applicable to device in this application. 12)Application for scanning receivers... This is not applicable to device in this application. c)Composite Systems This is not applicable to device in this application. Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 7 of 24 3. Lab Measurements Discussion / Test Notes 3.1 Test Notes 3.1.1 Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ] In the event of an alarm, 4 packet is sent. The packet duration is, at most, 30 mS, see Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]. The following plot shows a 4 packet transmission that concludes in less than 5 seconds. Interactive Technologies Inc FCC_REPT.DOC 02/05/02 7:53 AM FCC ID: B4Z-785B-ALGRO Page 9 of 24 3.1.2 Supervisory Calculation [ §15.231(a)(3) ] As permitted, this device will transmit one packet, in low po…

Text truncated - open the document above for the full version.

Interactive Technologies Inc 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 1 of 25 W:\iti2vol2\PRJ\DEG\ACTIVE\60-874-95R Allegro\Approvals-Listings-Technical File\FCC\Part 15 Submittle\peices\FCC_REPT.DOC Interactive Technologies, Inc. ALLEGRO Security Control Panel B4Z-785B-ALGRO Certification Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 2 of 25 ALLEGRO Security Control Panel B4Z-785B-ALGRO 2/5/2002 Interactive Technologies, Inc. 2266 North Second Street North Saint Paul, MN 55109 (651) 777-2690 Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 3 of 25 1. INTRODUCTION4 2. STATEMENT OF COMPLIANCE4 3. LAB MEASUREMENTS DISCUSSION / TEST NOTES7 3.1 Test Notes7 3.1.1 Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ]7 3.1.2 Supervisory Calculation [ §15.231(a)(3) ]9 3.1.3 Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]9 3.1.4 Bandwidth Measurement [ §15.231(c) ]12 3.1.5 Emissions Measurements16 3.1.5.1 Radiated Emissions Summary16 3.1.5.2 FCC Emissions Calculation16 3.1.5.2.1 Terms16 3.1.5.2.2 Example Calculation17 3.1.5.3 Radiated Emissions18 3.1.5.4 Forbidden Bands18 Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 4 of 25 1. Introduction This device is a wireless Control Panel with a transmitter for use in a wireless security system. The unit is self-contained and powered by an 8VAC Class 2 transformer, and four 1.2V Ni-Cad batteries, used as a back up power supply. The transmitter’s frequency is crystal controlled and is not adjustable by the user. The device measures approximately 3.75” in width, 1.72” in depth and 7.75′′ in height. The unit weighs approximately 8 ounces without batteries. We are requesting Certification under FCC Rules, Part 15, Subpart C, Paragraph 15.231. Please send comments/suggestions on the report format to: [email protected]. 2. Statement of Compliance §2.907Certification This is an application for certification §2.911Application a)This is an application and has been filed electronically with form 731. b)All information required has been supplied. c)The applicant has signed the application (electronically). d)The technical data has been signed. (See Radiated Emissions) e)Applicant signature block on electronic form 731 completed by officer of the company or authorized company personnel. f) The appropriate fee has been paid electronically with VISA on 2/5/02. §2.915Grant This application demonstrates that all applicable technical standards have been met and a grant of this application will serve the public interest. §2.925Label Each piece of equipment for which authorization will be granted will be uniquely identified with “FCC ID: B4Z-785B-ALGRO.” The required statement will appear with the FCC ID on the product and, although not required, in the installation instructions. See Exhibit A, PDF file id_label.pdf Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 5 of 25 §2.947Measurement Procedure a)The measurement procedure follows ANSI C63.4 procedure. Procedural notes are contained in the laboratory report. d)A list of test equipment used is contained in the laboratory report. §2.948Description of Measurement Facilities Measurements were performed at TUV Testing Services Open Test Site. The FCC keeps a full description of the measurement facilities on file. TUV’s acceptance and approval is dated as December 5, 1993 in a letter received from the FCC. The address of the test facility is: TUV Product Service 19035 Wild Mountain Road Taylors Falls, MN 55084-1758 Phone: 651-638-0297 Contact:Joel Schneider Test Engineer in Charge See Exhibit F, PDF file test_pho.pdf for sketch of measurement setup §2.1033Application for Certification a)Form 731 has been electronically filed on 2/5/02. Items that did not apply were left blank. b)This technical report contains the following information where applicable. 1)Full name and mailing address of manufacturer and applicant for certification: Interactive Technologies Inc 2266 North Second Street North Saint Paul, MN 55109 2)FCC Identifier: B4Z-785B-ALGRO 3)Copy of installation instructions: See Exhibit G, PDF file: user_man.pdf 4)Brief Description of circuit functions and device operation: See Exhibit I, PDF file op_desc.pdf Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 6 of 25 See Exhibit D, PDF file schemat.pdf for schematics (page 1) and parts placement (page 2) diagrams. 5) Block Diagram See Exhibit C, PDF file block.pdf. 6)Report of the measurements of radiation and conducted emissions: This document. 7)Photographs External: See Exhibit B, PDF file extern.pdf Internal: See Exhibit H, PDF file intern.pdf 8)Peripheral or Accessory devices: This is not applicable since this device is stand-a- lone product. 9) Transition Rules This application is not pursuant to the transition rules of §15.37 10)Emergency Broadcast decoding: This is not applicable to device in this application. 11)Application for direct sequence spread spectrum devices... This is not applicable to device in this application. 12)Application for scanning receivers... This is not applicable to device in this application. c)Composite Systems This is not applicable to device in this application. Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 7 of 25 3. Lab Measurements Discussion / Test Notes 3.1 Test Notes 3.1.1 Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ] In the event of an alarm, 4 packet is sent. The packet duration is, at most, 30 mS, see Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]. The following plot shows a 4 packet transmission that concludes in less than 5 seconds. Interactive Technologies Inc FCC_REPT.DOC 05/01/02 2:11 PM FCC ID: B4Z-785B-ALGRO Page 9 of 25 3.1.2 Supervisory Calculation [ §15.231(a)(3) ] As permitted, this device will tra…

Text truncated - open the document above for the full version.

Interactive Technologies Inc 02/05/02 7:57 AM FCC ID: B4Z-785B-ALGRO C:\WINNT\Profiles\Kenl.Nelson\Desktop\FCC Documintation\Submittles\Allegro\peices\TEST_PHO.DOC 0.8 Meters EUT Receiving Antenna 3 Meters EXHIBIT F Test Setup Sketch for Radiated Emissions 1 Meter