B4Z-832-PPXPalm Pilot transmitter

1 V†r…Bˆvqr ZZZ*(,QWHUORJL[FRP B@D‡r…y‚tv‘ 9 Product Summary The Apartment Access Program and Transmitter Card (60-965-95) used with your Palm™ hand- held device allows service personnel to disarm an apartment’s Allegro™ or Concord™ Express security system. Installation Install the Transmitter Card in your Palm SD slot. Perform a HotSync ® operation to install the Apartment Access Program on your Palm handheld. See the Readme file on the CDROM for complete Apartment Access Program installation instructions. Setting up the PKS Learning the Palm Key into the Security System To learn the Palm Key into a security system: 1. Put the security system in Learn Mode. 2. Enter the password at the AptAcc Login screen. 3. Select the Building. 4. Select the Unit. 5. Click Learn to add the Palm key to the security system. Programming Jobs A job defines access criteria for disarming an apartment’s security system. It contains the follow- ing information: •Workman ID(s) •Building number(s) of apartments to be accessed •Unit number(s) to be entered •Job Minutes (Amount of time service personnel can be in the apartment.) •Time Restrict (The time range of when the apartment can be entered.) •# of Days (When the job expires.) •# of Uses (How many times the apartment security system can be disarmed using the key.)
To create a job: 1. Enter the password at the AptAcc Login screen. 2. Select the Workman ID or select Add New to create a new workman. 3. Select the Building # that can be accessed or select All Bldgs to allow access to all. 4. Select the Unit Number # that can be accessed or select All Units to allow access to all units in the specified Building #. 5. Using the arrows select the Job Minutes. (30-240 minutes in 30 minute intervals) or select No Limit to allow an unlimited amount of time in the unit. 6. Click on the field next to Time Restrict to enter the start and end time of the Time Restrict range. 7. Click the start time, then the end time. The program returns to the AptAcc Site Manager screen. 8. Use the arrows to select the # of Days before the job will expire. (1-254 days) or select No Limit to allow the job to have the job never expire. 9‚pˆ€r‡ Iˆ€ir…) #%%!'! Sr‰ 6 Eˆr !" QS@GDHDI6S` Preliminary 6/24/03 Qhy€Fr’T’†‡r€ Qh…‡ I‚ %YYY 2 Palm Key System Installation Instructions Preliminary 6/24/03 9. Use the arrows to select the # of Uses the job will allow (1-1000 uses) or select No Limit to allow an unlimited number of uses. 10. Click Add to create the job. Using the PKSAfter a job has been created the Palm can be used to access units specified in the job. Disarming the System 1. Enter the Workman ID in the password field of the AptAcc login screen. 2. Select the Building. 3. Select the Unit. 4. Click Disarm Arming the System 1. Enter the Workman ID in the password field of the AptAcc login screen. 2. Select the Building. 3. Select the Unit. 4. From the AptAccess screen click Arm. SpecificationsCompatibility: ........................... Allegro, Concord Express Frequency:................................. 319.5 MHz NoticesFCC Notices FCC Part 15 Information to the User 7K LVG HYLFH FRP SOLH VZ LW KS DUW V RI WK H )&&UXOH V2SH U DW LRQ LVVXEMH FW WR W K HI ROORZ LQJ W ZRFR QG LW LR QV  ‡7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFH ‡7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ &K DQJ H VRU PR GLI LFDW LRQ VQ RW H [S UH VVO\DS S URYH GE\*( ,QW H UORJ L[FDQYR LGW KH XVH U·VDXW K RU LW\W RRS H UDW HW KH H TXLS PH Q W )&& ,'% =    3 3;    6H FRQ G 6 WU H HW 1RU WK  1R UW K6 DLQW 3DXO01    7 H FKQ LFDO6 XS SR UW         A B@D‡r…y‚tv‘ ‹   *( ,Q W HU ORJ L[$ OOH J URDQ G&R Q FRUGDUH WU DG HP DUNVR I*( LQ WH UOR JL[3 DOP LVD W UDG HP DUN RI 3 DOP,QF+ RW 6\Q FLVDUH JLVW H UH GWU DGH P DUNRI 3 DOP ,Q F$OORW KH UWU DG H P DU NVDUH SUR SH UWLH VRI WK H LU RZ Q HU V $OOULJ KW VUH VH UYH G 

GE Interlogix, Inc 06/24/03 3:44 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\BLOCK.DOC EXHIBIT C Block Diagram of Product 106.5MHz Osc RF Amp Palm Pilot ITI Transmitter Palm Pilot PDA TI MSP 430 Flash based Microprocessor

6/24/03 To: FCC Re: Form 731 associated with Authorization application B4Z-832-PPX I had great difficulty in getting the form 731 filled out. I would mysteriously get booted back to the FCC home page while I was entering the information. After several tries and a few hours, I eventually got through it by entering minimal information. I thought I could go back to update it later, but now find that I can't. My concern is that the default information in the header is not correct. If there is any questions about this submittal since I didn't fill out the technical contact, please contact me as indicated below. Meanwhile, I am sending a letter in to have the default information corrected. Thank you, John Bergman VP of Wireless Engineering GE Interlogix 2266 North 2 nd Street North Saint Paul, MN 55109 800-777-1415 x4833 [email protected]

GE Interlogix, Inc 06/24/03 4:12 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\extern.DOC EXHIBIT B External Photographs

GE Interlogix, Inc 06/24/03 4:10 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\id_label.DOC EXHIBIT A ID Label / Location

GE Interlogix, Inc 06/24/03 4:11 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\intern.DOC EXHIBIT H Internal Photographs

GE Interlogix, Inc 06/24/03 4:13 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\OP_DESC.DOC Product Description The product is a wireless transmitter used in conjunction with a Palm Pilot M500 PDA. The device is used in a wireless security alarm system to arm and disarm the security system. The homeowner invokes a software application on the Palm Pilot. The software application presents a menu on the touchscreen that replicates an existing KeyFob product. The user may select the arm or disarm touchscreen button with the Palm stylus. According to the button selected, the software application communicates with the transmitter microprocessor the necessary information. The micro then formats the data and controls the transmitter to send out the RF message. In the absence of any use, the transmitter may send a supervisory transmission once every hour. The RF circuit consists of a 106.5 MHz oscillator followed by an amplifier. The amplifier is turned on and off to modulate the carrier. EXHIBIT I Operational Description

Radiated Electromagnetic Emissions Test Report #: 6010 Run 01 Test Area: LTS 3m Test Method: N/A Test Date: 04-Dec-2002 EUT Model #: 55-832 EUT Power: Palm Pilot's internal battery EUT Serial #: Temperature: 23 °C Manufacturer: GE Interlogix Relative Humidity: 15 % EUT Description: Palm Pilot Transmitter Air Pressure: 100.3 kPa Notes: Transmitter card inserted into palm pilot as accessory Page: 1 of 4 Will not operate stand alone FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2 (MHz) (dBuV) (dB) (dBuV) (m) (DEG) N/A N/A Tested by: G Jakubowski Printed Signature Reviewed by: Printed Signature PreAmp: None Transmitter in CW test mode Following fundamental measurements maximized Palm pilot on its back 319.50 72.4 Pk 1.6 / 14.0 / 0.0 87.9 H / 1.0 / 286.0 N/A N/A Palm pilot upright 319.50 65.3 Pk 1.6 / 14.0 / 0.0 80.9 V / 1.6 / 310.0 N/A N/A Palm pilot on its side 319.50 69.2 Pk 1.6 / 14.0 / 0.0 84.8 H / 1.0 / 254.0 N/A N/A Palm pilot on its back 319.50 72.5 Pk 1.6 / 14.0 / 0.0 88.0 H / 1.0 / 294.0 N/A N/A PreAmp: LTS Preamp ID 2665 319.50 100.2 Pk 1.6 / 14.0 / 27.7 88.1 H / 1.0 / 294.0 N/A N/A 106.50 59.8 Pk 0.9 / 9.4 / 27.9 42.2 V / 1.0 / 0.0 N/A N/A 213.00 73.0 Pk 1.4 / 11.1 / 27.7 57.7 V / 1.0 / 0.0 N/A N/A 327.52 37.6 Pk 1.6 / 14.2 / 27.7 25.7 V / 1.0 / 0.0 N/A N/A 426.00 59.6 Pk 1.8 / 16.9 / 27.7 50.6 V / 1.0 / 0.0 N/A N/A 532.51 48.4 Pk 2.0 / 18.9 / 27.6 41.6 V / 1.0 / 0.0 N/A N/A 639.02 42.6 Pk 2.3 / 19.7 / 27.6 37.0 V / 1.0 / 0.0 N/A N/A 745.51 55.1 Pk 2.4 / 21.0 / 27.5 51.1 V / 1.0 / 0.0 N/A N/A Radiated Electromagnetic Emissions Test Report #: 6010 Run 01 Test Area: LTS 3m Test Method: N/A Test Date: 04-Dec-2002 EUT Model #: 55-832 EUT Power: Palm Pilot's internal battery EUT Serial #: Temperature: 23 °C Manufacturer: GE Interlogix Relative Humidity: 15 % EUT Description: Palm Pilot Transmitter Air Pressure: 100.3 kPa Notes: Transmitter card inserted into palm pilot as accessory Page: 2 of 4 Will not operate stand alone FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2 (MHz) (dBuV) (dB) (dBuV) (m) (DEG) N/A N/A Tested by: G Jakubowski Printed Signature Reviewed by: Printed Signature 852.01 48.6 Pk 2.6 / 22.2 / 27.2 46.3 V / 1.0 / 0.0 N/A N/A 958.52 47.2 Pk 2.9 / 23.1 / 27.2 46.0 V / 1.0 / 0.0 N/A N/A 1065.00 43.2 Pk 2.9 / 23.1 / 27.2 42.0 V / 1.0 / 0.0 N/A N/A 1810.52 38.2 Pk 3.8 / 28.1 / 27.2 42.9 V / 1.0 / 0.0 N/A N/A 639.02 49.6 Pk 2.3 / 19.7 / 27.6 44.1 V / 1.0 / 90.0 N/A N/A 852.01 49.1 Pk 2.6 / 22.2 / 27.2 46.7 V / 1.0 / 90.0 N/A N/A 106.50 63.4 Pk 0.9 / 9.4 / 27.9 45.8 V / 1.0 / 180.0 N/A N/A 532.51 54.1 Pk 2.0 / 18.9 / 27.6 47.4 V / 1.0 / 180.0 N/A N/A 639.02 51.9 Pk 2.3 / 19.7 / 27.6 46.3 V / 1.0 / 180.0 N/A N/A 532.51 56.4 Pk 2.0 / 18.9 / 27.6 49.6 V / 1.0 / 270.0 N/A N/A 106.50 73.0 Pk 0.9 / 9.4 / 27.9 55.4 H / 2.0 / 270.0 N/A N/A 213.00 78.7 Pk 1.4 / 11.1 / 27.7 63.4 H / 2.0 / 270.0 N/A N/A 426.00 66.3 Pk 1.8 / 16.9 / 27.7 57.3 H / 2.0 / 270.0 N/A N/A 532.51 64.0 Pk 2.0 / 18.9 / 27.6 57.3 H / 2.0 / 270.0 N/A N/A 639.02 59.1 Pk 2.3 / 19.7 / 27.6 53.6 H / 2.0 / 270.0 N/A N/A 745.51 59.6 Pk 2.4 / 21.0 / 27.5 55.6 H / 2.0 / 270.0 N/A N/A 852.01 53.8 Pk 2.6 / 22.2 / 27.2 51.4 H / 2.0 / 270.0 N/A N/A Maximized 213.00 79.7 Pk 1.4 / 11.1 / 27.7 64.4 H / 1.4 / 294.0 N/A N/A 426.00 69.1 Pk 1.8 / 16.9 / 27.7 60.1 H / 1.0 / 299.0 N/A N/A Antenna: LTS Horn ID# 2075 Max'd Radiated Electromagnetic Emissions Test Report #: 6010 Run 01 Test Area: LTS 3m Test Method: N/A Test Date: 04-Dec-2002 EUT Model #: 55-832 EUT Power: Palm Pilot's internal battery EUT Serial #: Temperature: 23 °C Manufacturer: GE Interlogix Relative Humidity: 15 % EUT Description: Palm Pilot Transmitter Air Pressure: 100.3 kPa Notes: Transmitter card inserted into palm pilot as accessory Page: 3 of 4 Will not operate stand alone FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2 (MHz) (dBuV) (dB) (dBuV) (m) (DEG) N/A N/A Tested by: G Jakubowski Printed Signature Reviewed by: Printed Signature 2130.01 41.5 Pk 4.1 / 29.9 / 27.3 48.3 H / 1.2 / 0.0 N/A N/A 2769.00 44.6 Pk 4.8 / 31.2 / 27.0 53.6 H / 1.1 / 0.0 N/A N/A RF turned off Transmitter in standby mode No significant emissions detected Antenna both vertical & horizontal, 1 to 4 meters high EUT rotated 360 degrees End scan 30MHz to 3200MHz Radiated Electromagnetic Emissions Test Report #: 6010 Run 01 Test Area: LTS 3m Test Method: N/A Test Date: 04-Dec-2002 EUT Model #: 55-832 EUT Power: Palm Pilot's internal battery EUT Serial #: Temperature: 23 °C Manufacturer: GE Interlogix Relative Humidity: 15 % EUT Description: Palm Pilot Transmitter Air Pressure: 100.3 kPa Notes: Transmitter card inserted into palm pilot as accessory Page: 4 of 4 Will not operate stand alone FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2 (MHz) (dBuV) (dB) (dBuV) (m) (DEG) N/A N/A Tested by: G Jakubowski Printed Signature Reviewed by: Printed Signature ********** MEASUREMENT SUMMARY ********** 106.50 73.0 Pk 0.9 / 9.4 / 27.9 55.4 H / 2.0 / 270.0 N/A N/A 213.00 79.7 Pk 1.4 / 11.1 / 27.7 64.4 H / 1.4 / 294.0 N/A N/A 319.50 100.2 Pk 1.6 / 14.0 / 27.7 88.1 H / 1.0 / 294.0 N/A N/A 327.52 37.6 Pk 1.6 / 14.2 / 27.7 25.7 V / 1.0 / 0.0 N/A N/A 426.00 69.1 Pk 1.8 / 16.9 / 27.7 60.1 H / 1.0 / 299.0 N/A N/A 532.51 64.0 Pk 2.0 / 18.9 / 27.6 57.3 H / 2.0 / 270.0 N/A N/A 639.02 59.1 Pk 2.3 / 19.7 / 27.6 53.6 H / 2.0 / 270.0 N/A N/A 745.51 59.6 Pk 2.4 / 21.0 / 27.5 55.6 H / 2.0 / 270.0 N/A N/A 852.01 53.8 Pk 2.6 / 22.2 / 27.2 51.4 H / 2.0 / 270.0 N/A N/A 958.52 47.2 Pk 2.9 / 23.1 / 27.2 46.0 V / 1.0 / 0.0 N/A N/A 1065.00 43.2 Pk 2.9 / 23.1 / 27.2 42.0 V / 1.0 / 0.0 N/A N/A 1810.52 38.2 Pk 3.8 / 28.1 / 27.2 42.9 V / 1.0 / 0.0 N/A N/A 2130.01 41.5 Pk 4.1 / 29.9 / 27.3 48.3 H / 1.2 / 0.0 N/A N/A 2769.00 44.6 Pk 4.8 / 31.2 / 27.0 53.6 H / 1.1 / 0.0 N/A N/A

GE Interlogix, Inc 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 1 of 19 D:\Archived\Projects\Palm TX\FCC\pcs\FCC_REPT.DOC GE Interlogix, Inc. Palm Pilot Transmitter B4Z-832-PPX Certification GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 2 of 19 Palm Pilot Transmitter B4Z-832-PPX 6/24/03 GE Interlogix, Inc. 2266 North Second Street North Saint Paul, MN 55109 (651) 777-2690 GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 3 of 19 1.INTRODUCTION4 2.STATEMENT OF COMPLIANCE4 3.LAB MEASUREMENTS DISCUSSION / TEST NOTES7 3.1Test Notes7 3.1.1Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ]7 3.1.2Supervisory Calculation [ §15.231(a)(3) ]9 3.1.3Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]9 3.1.4Bandwidth Measurement [ §15.231(c) ]12 3.1.5Emissions Measurements16 3.1.5.1Radiated Emissions Summary16 3.1.5.2FCC Emissions Calculation16 3.1.5.2.1Terms16 3.1.5.2.2Example Calculation17 3.1.5.3Radiated Emissions17 3.1.5.4Forbidden Band4s18 GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 4 of 19 1. Introduction This device is a wireless transmitter that interfaces to a Palm Pilot M500. This device can then be used to arm or disarm a security system much like the device of B4Z-760A-EFOB. The power for the transmitter is supplied from the Palm Pilot. The transmitter’s frequency is crystal controlled and is not adjustable by the user. The device measures approximately 1.375′′ by 1.0′′ by 0.030.′′ The unit weighs less than one ounce. We are requesting Certification under FCC Rules, Part 15, Subpart C, Paragraph 15.231. Please send comments/suggestions on the report format to [email protected]. Grantee Code: B4Z 2. Statement of Compliance §2.907Certification This is an application for certification §2.911Application a)This is an application and has been filed electronically with form 731. b)All information required has been supplied. c)The applicant has signed the application (electronically). d)The technical data has been signed. (See Radiated Emissions) e)Applicant signature block on electronic form 731 completed by officer of the company or authorized company personnel. f) The appropriate fee has been paid electronically with VISA on 6/24/03. §2.915Grant This application demonstrates that all applicable technical standards have been met and a grant of this application will serve the public interest. §2.925Label Each piece of equipment for which authorization will be granted will be uniquely identified with “FCC ID: B4Z-832-PPX.” The required statement will appear with the FCC ID on the product and, although not required, in the installation instructions. See Exhibit A, PDF file id_label.pdf GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 5 of 19 §2.947Measurement Procedure a)The measurement procedure follows ANSI C63.4 procedure. Procedural notes are contained in the laboratory report. d)A list of test equipment used is contained in the laboratory report. §2.948Description of Measurement Facilities Measurements were performed at TUV Testing Services Open Test Site. The FCC keeps a full description of the measurement facilities on file. TUV’s acceptance and approval is dated as December 5, 1993 in a letter received from the FCC. The address of the test facility is: TUV Product Service 19035 Wild Mountain Road Taylors Falls, MN 55084-1758 Phone: 651-638-0297 Contact:Joel Schneider Test Engineer in Charge See Exhibit F, PDF file test_pho.pdf for sketch of measurement setup §2.1033Application for Certification a)Form 731 has been electronically filed on 6/24/03. Items that did not apply were left blank. b)This technical report contains the following information where applicable. 1)Full name and mailing address of manufacturer and applicant for certification: GE Interlogix, Inc. 2266 North Second Street North Saint Paul, MN 55109 2)FCC Identifier: B4Z-832-PPX 3)Copy of installation instructions: See Exhibit G, PDF file: user_man.pdf 4)Brief Description of circuit functions and device operation: See Exhibit I, PDF file op_desc.pdf GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 6 of 19 See Exhibit D, PDF file schemat.pdf for schematics (page 1) and parts placement (pages 2 & 3) diagrams. 5) Block Diagram See Exhibit C, PDF file block.pdf. 6)Report of the measurements of radiation and conducted emissions: This document. 7)Photographs External: See Exhibit B, PDF file extern.pdf Internal: See Exhibit H, PDF file intern.pdf 8)Peripheral or Accessory devices: This product works in conjunction with a Palm Pilot M500 PDA. The Palm Pilot is shown in the photographs, and more information is available about the Palm at: www.palm.com/products/palmm500/. The image below was clipped from the website: 9) Transition Rules This application is not pursuant to the transition rules of §15.37 10)Emergency Broadcast decoding: This is not applicable to device in this application. 11)Application for direct sequence spread spectrum devices... This is not applicable to device in this application. 12)Application for scanning receivers... This is not applicable to device in this application. c)Composite Systems This is not applicable to device in this application. GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 7 of 19 3. Lab Measurements Discussion / Test Notes 3.1 Test Notes 3.1.1 Transmissions shall cease within 5 seconds of activation [ §15.231(a)(2) ] In the event of a disarm or arm command, two packets are sent in the transmission. The packet duration is, at most, 30 mS, see Duty Cycle Correction Factor [§15.231(b)(2) and §15.35(c)]. The time between packets random between 100 mS and 450 mS so the length of the longest transmission is: 2*30mS + 450mS = 0.51 seconds. The following plot shows a 2-packet transmission that concludes in less than 5 seconds. GE Interlogix, Inc FCC_REPT.DOC 06/24/03 5:07 PM FCC ID: B4Z-832-PPX Page 8 of 19 See fig1.…

Text truncated - open the document above for the full version.

GE Interlogix, Inc 06/24/03 4:13 PM FCC ID: B4Z-832-PPX D:\Archived\Projects\Palm TX\FCC\pcs\TEST_PHO.DOC 0.8 Meters EUT Receiving Antenna 3 Meters EXHIBIT F Test Setup Sketch for Radiated Emissions 1 Meter