Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Certification Designating Applicant as FCC US Agent To: Federal Communications Commission Date: 2026/6/25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: B94-HXWD261 HP Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant acknowledge the applicant’s acceptance to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledge the responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: HP Inc. Contact Person: Richard Tarsio Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected] FCC FRN: 0025126541 Sincerely yours, Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer
Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026/6/25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: B94-HXWD261 [HP Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected]
Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026/6/25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: B94-HXWD261 [HP Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Vanessa Tsai Title: Product Compliance Engineer Address: 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States Tel.: 970-898-8713 Email: [email protected]
TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 Authority to Act as Agent Date: 2026/6/25 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland of North American Inc., 1279 Quarry Lane, Suite A, Pleasanton, CA 94566, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ____HP Inc. / 3390 East Harmony Road, Fort Collins, Colorado, 80528 United States_________. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2026/6/25 Agreement is valid for 12 months from the above date. By: Vanessa Tsai__ _________ (Signature) (Print name) Product Compliance Engineer___ (208) 333-5722_ __ (Title) (Telephone) On behalf of: HP Inc. __ (Company Name)
TCB FCC Request for Confidentiality Letter Number: MS-0044715 Revision: 1 Effective date: Sep 12, 2022 Author: William Graff Owner: William Graff MS-0044715 Page 1 of 1 Revision 1 Date: 2026/6/25 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: B94-HXWD261 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List HP Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _ Vanessa Tsai / Product Compliance Engineer (Signature) (Print name/Title) Tel: (208) 333-5722 Email: [email protected]
HP Inc. 3390 E Harmony Rd Fort Collins, CO 80528 USA Authorization on Behalf of HP Inc. for the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, Richard P. Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (“HP”) and Applicant/Grantee Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2. This Authorization will designate the person named below to act on my behalf and HP’s behalf as an authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name: Vanessa Tsai Title: Product Compliance Engineer Address: HP Inc. No. 1-5, Lixing 1 st Road, East District Hsinchu City, HSZ Taiwan Telephone: +886 932285270 E-mail: [email protected] 3. Questions about the scope and effect of this Authorization should be addressed as follows: Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer Worldwide Technical Regulations HP Inc. (A) 3390 East Harmony Road, MS 66 Fort Collins, CO 80528 (T) +1 970 898 8713 (E) [email protected] 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Fort Collins, Colorado on the date indicated below my signature. Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer HP Inc. Date: 29 June 2021
R-R-hpi- HXWD261 V0.12026.01.29初版Cheery V0.2 V0.3 V0.4 2026.02.02第一版Cheery 2026.03.04 2026.03.10 第二版 取消Indonesia Mouse ID 及二 Cheery Cheery V0.5 V0.6 V0.7 2026.03.30 2026.05.26 调整位置 修改镭雕LOGO为线条 2026.05.29 删除部分安规，变更排版方式 Cheery Cheery Cheery V0.8 V0.9 V1.0 2026.06.01 2026.06.11 2026.06.15 变更方案一排版方式 Cheery 变更LOGO位置及间距 变更中英文品名 Cheery Cheery R-R-hpi- HXWD261 8mm 8mm 5mm 2.5mm M/D : YYMM 以下为变量： YY=年代码，例：2025=25，2026=26.. MM=月代码（01~12） Wireless Desktop Dongle Regulatory Model/型號/型号:HXWD261 桌上型無線接收器/无线桌面接收器 XXXXX/DJID/20XX 2141 XXXXXXXXXXXXXX IC: 466C-HXWD261 Rating / 額定電壓電流 / 额定电压电流 5V 500mA M/D : YYMM CAN ICES-3(B)/NMB-3(B) HP Inc. [email protected] FCC ID: B94-HXWD261 XXX- XXXXXX R XXX- XXXXXX R Made in China 中國製造 / 中国制造
Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26FXS4 001 Auftrags-Nr.: Order no.: 48306517 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-06-10 Auftraggeber: Client: HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528, USA Prü fgegenstand: Test item: Wireless Desktop Dongle Bezeichnung / Typ-Nr.: Identification / Type no.: HXWD261 Auftrags-Inhalt: Order content: FCC Certification Prü fgrundlage: Test specification: IEEE Std C95.1 47 CFR §2.1093 47 CFR §1.1310 Wareneingangsdatum: Date of sample receipt: 2026-05-18 Prü fmuster-Nr.: Test sample no: A004281666-004 A004281666-011 Prü fzeitraum: Testing period: 2026-06-09 - 2026-06-11 Ort der Prü fung: Place of testing: TÜ V Rheinland Taiwan Ltd. New Taipei Branch Prü flaboratorium: Testing laboratory: TÜ V Rheinland Taiwan Ltd. Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: compiled by: Ryan Chen genehmigt von: authorized by: Flight Hsieh Datum: Date: 2026-08-21 Ausstellungsdatum: Issue date: 2026-08-21 Stellung / Position: Senior Project Manager Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26FXS4 001 Seite 2 von 9 Page 2 of 9 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Gua…
Text truncated - open the document above for the full version.
Antenna test report Shenzhen YimingyuanTechnology Co., Ltd Address: 2nd Floor, Building 5, YifenghuaInnovation Industrial Park, DalangStreet, LonghuaDistrict, Shenzhen Operator: concordedongle tester：Huang He TEL：134 2435 5302 Report edition：2026.05.22 One stop communication RF antenna solution manufacturer S h e n z h e n Y i m i n g y u a n Te c h n o l o g y C o . , L t d O n e s t o p c o m m u n i c a t i o n R F a n t e n n a s o l u t i o n m a n u f a c t u r e r Project Development Environment Testing instruments and software namenetwork analyzer brandAgilent Technologies modelE5071C serial numberMY46104453 calibration time2025/8/25 Next calibration time2026/8/24 Test steps and data export Information of Antenna Customer Information: Customer: Dongguan Thermal Electronic Technology Co., Ltd Customer Address: No. 28 JinyulingRoad, DongchengStreet, Dongguan City, Guangdong Province, China Project Name: concordedongle Antenna manufacturing information: Antenna manufacturing: Shenzhen YimingyuanTechnology Co., Ltd Antenna model: concordedongle Antenna type: FPC antenna Antenna gain: 1.78dBi Antenna manufacturing address: 2nd floor, East Building, Building 5, Da Lang Yi Feng Hua Industrial Park, HuaningRoad, LonghuaDistrict, Shenzhen Antenna smith circle chart and S11 parameters Antenna efficiency 深圳市亿铭远科技有限公司 测试数据报告地址：深圳市龙华区大浪街道颐丰华创新产业园5栋2楼 软件版本：SNF V2.4.3 导出时间：2026/5/21 15:01:58 Frequency ID12345678910111213 Frequency（MHz）2402241024162422242824342440244624542460246624722480 Gain（dBi）1.000.500.521.061.431.220.951.231.371.621.721.721.78 Efficiency（dB）-3.59-3.64-3.69-3.32-3.14-3.23-3.12-2.93-3.00-2.90-2.82-2.77-2.73 Efficiency（%）43.7443.2542.7646.6048.4847.5448.8150.9850.1451.3352.2952.7953.34 Plane：Phi=02402241024162422242824342440244624542460246624722480 Plane：Phi=902402241024162422242824342440244624542460246624722480 Plane：Theta=902402241024162422242824342440244624542460246624722480 Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern Antenna apple diagram and pattern antenna size Please double-check whether the matching circuitry mentioned in the report has been modified and whether environmental treatment has been introduced, which will directly affect the antenna performance. Additional notes The parameters provided in this report are only the parameters given by the customer to our company's commissioning prototype, and do not represent the final mass production status of your company's final project. If your company has the latest trial production, or updated status (replacement of materials, update software, change of environmental treatment, etc.) of the prototype, please submit it to our company for verification as soon as possible to confirm whether the antenna performance is affected. If your company needs to send it to a third party for re- testing or to the customer for testing, please be sure to hand over the machine to our company for testing and confirmation, because the consistency of the motherboard, the consistency of the assembly, and the difference in antenna assembly and other factors may lead to the deviation of antenna parameters.
Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26P4IQ 001 Auftrags-Nr.: Order no.: 48306517 Seite 1 von 29 Page 1 of 29 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-06-10 Auftraggeber: Client: HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528, USA Prü fgegenstand: Test item: Wireless Desktop Dongle Bezeichnung / Typ-Nr.: Identification / Type no.: HXWD261 Auftrags-Inhalt: Order content: FCC Part 15C Test report (SRD) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 2026-05-18 Prü fmuster-Nr.: Test sample no: A004281666-004 A004281666-011 Prü fzeitraum: Testing period: 2026-06-09 - 2026-06-11 Ort der Prü fung: Place of testing: TÜ V Rheinland Taiwan Ltd. New Taipei Branch Prü flaboratorium: Testing laboratory: TÜ V Rheinland Taiwan Ltd. Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass zusammengestellt von: compiled by: Ryan Chen genehmigt von: authorized by: Flight Hsieh Datum: Date: 2026-07-16 Ausstellungsdatum: Issue date: 2026-07-16 Stellung / Position: Senior Project Manager Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26P4IQ 001 Seite 2 von 29 Page 2 of 29 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this tes…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 4.50 mW |
Wireless Mouse
Equipment Class
DTS - Digital Transmission SystemModel HSN-I70C
Equipment Class
CBE - Citizens Band End User DevicesNotebook PC
Equipment Class
TNB - Licensed Non-Broadcast Station TransmitterNotebook Computer HSN-I65C-4
Equipment Class
PCB - PCS Licensed TransmitterNotebook Computer HSN-I67C-4
Equipment Class
CBE - Citizens Band End User Devices