B94HHI14CNiPAQ 600 SERIES

HP iPAQ Product Guide © Copyright 2007 Hewlett-Packard Development Company, L.P. HP iPAQ products are powered by Microsoft® Windows Mobile® 6 Professional with Messaging and Security Feature Pack. Microsoft Windows, the Windows logo, Outlook, Windows Mobile Device Center, and ActiveSync are trademarks of Microsoft Corporation in the U.S. and other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. SD Logo is a trademark of its proprietor. Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L.P. under license. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided ”as is” without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as an additional warranty. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Development Company, L.P. August 2007 Document Part Number: 455719–001 Table of contents 1 Register your HP iPAQ 2 Box contents 3 Components Front panel components ....................................................................................................................... 3 Top and bottom panel components ...................................................................................................... 4 Left and right side components ............................................................................................................ 5 Back panel components ....................................................................................................................... 6 4 Set up your HP iPAQ Step 1: Remove the battery cover and insert the SIM card .................................................................. 7 Step 2: Install the battery and replace the battery cover ...................................................................... 8 Step 3: Charge the battery ................................................................................................................... 9 Step 4: Turn on your HP iPAQ ............................................................................................................. 9 Protect your HP iPAQ with a password ................................................................................................ 9 Find the serial and model number ...................................................................................................... 10 Status Icons ........................................................................................................................................ 10 5 Learn the basics The Today screen .............................................................................................................................. 12 TodayPanel Lite ................................................................................................................................. 12 Enter text ............................................................................................................................................ 13 Customize your HP iPAQ ................................................................................................................... 14 Device information ............................................................................................................. 14 Enter owner information ..................................................................................................... 14 Change the regional settings ............................................................................................. 14 Adjust the volume .............................................................................................................. 15 Change the power management settings .......................................................................... 15 Dim or adjust the brightness of the backlight ..................................................................... 15 Install and remove programs ............................................................................................. 16 Open and close programs ................................................................................................. 16 Set alarms and clocks ........................................................................................................ 16 Shortcut menus .................................................................................................................. 17 Display the clock in title bar ............................................................................................... 17 Create and assign a category ............................................................................................ 17 Adjust the speed for scrolling through items in a list .......................................................... 17 View the Operating System (OS) information .................................................................................... 17 Lock and unlock your HP iPAQ .......................................................................................................... 18 Battery saving tips .............................................................................................................................. 18 6 Use your Business Navigator iii Use the keypad .................................................................................................................................. 19 Smart-Touch Navigation wheel ...............................…

Text truncated - open the document above for the full version.

8HP Photosmart Mobile HP Photosmart Mobile You can use HP Photosmart Mobile to: ● View pictures stored on your HP iPAQ or a storage card. ● Add voice or text notes to pictures. ● Print pictures. ● View a slideshow. ● Send pictures via MMS, e-mail attachments, or Bluetooth. ● Associate a picture with a contact. ● Assign a picture to the Today screen background. ● Upload an image via e-mail to snapfish. Attach a voice note to a picture To attach a voice note to a picture: 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to which you want to add a voice note. 3. Tap the (Cassette) button. 4. Tap the (Record) button on the recording toolbar. 5. Speak into the microphone to record the voice note and tap the (Stop) button when finished. 6. Tap the (Cassette) button again to close the recording toolbar. E-mail pictures 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to be sent via e-mail. NOTE:If the media file is protected by Digital Rights Management (DRM), you would not be able to view or hear it. DRM is a software that enables secure distribution and prevents illegal distribution of pictures, videos, music, movies, and ring tones over the Internet. For more information on DRM, refer to the on–screen Help by tapping Start > Help and search for DRM. 3.Tap Menu > Send... > E-mail Attachment. 4.Select the Reduce sent photo size to check box, and then select the reduction in resolution. 5.Tap Next. 36Chapter 8 HP Photosmart Mobile 6.Enter the appropriate e-mail address or use Contacts by tapping Menu > Add Recipient. 7.Enter other appropriate information, such as an e-mail title and message. 8.Tap Send. Snapfish Snapfish feature enables you to upload images from your HP iPAQ to your Snapfish account via your e-mail account. 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to be sent via Snapfish. 3.Tap Menu > Send... > Snapfish. 4.Select the Reduce sent photo size to check box, and then select the required reduction in resolution. 5.Tap Next. 6.Select the appropriate e-mail account in the Select e-mail account list and tap Send. NOTE:To get more information about Snapfish feature, tap Help. NOTE:If the e-mail account used to send the photo to Snapfish is not registered, you will receive an e-mail with a link to a Web page that allows you to register an account. View a slideshow To view a slideshow: 1.Tap Start > Programs > Photosmart Mobile. 2. Tap the (Slideshow) button at the bottom of the screen. 3. Tap the screen to view the (Forward), (Backward), (Stop), and (Pause) buttons. Snapfish37 9Notes Write a note 1.Tap Start > Programs > Notes. NOTE:Writing must be selected as the default input mode. 2.Tap New. 3.Write your text on the screen. 4.When finished, tap ok to return to the note list. To select handwritten text, tap and hold next to the writing. As soon as dots appear and before they form a complete circle, quickly drag across the writing. If a letter crosses three ruled lines, it is treated as a drawing rather than text. Create a copy of a note To create a copy of a note: 1.Tap Start > Programs > Notes. 2.Tap the note you want to copy. 3.Select the text on the screen, tap Menu > Copy. 4.Open the required note from the note list or a new note to which the selected content is to be copied. 5.Tap Menu > Paste. If you paste the contents in a new note, a copy of the note displays in the note list. Create a voice note To create a stand-alone recording (voice note) or add a recording to a note: 1.Tap Start > Programs > Notes. 2.Do one of the following: ● To create a stand-alone recording, record from the note list. ● To add a recording to a note, create or open a note. NOTE:If the recording toolbar does not appear, tap Menu > View Recording Toolbar. 3.Tap Record. 4.Speak into the microphone located at the bottom of the unit. 5.When finished recording the note, tap Stop on the recording toolbar. 6.When finished, tap ok to return to the note list. 38Chapter 9 Notes NOTE:If recording in an open note, an icon appears in the note. If creating a stand-alone recording, an icon appears in the note list. Also, you can create a voice note in HP Photosmart Mobile and attach the note to a picture. Create a voice note39 10 Storage cards Use storage cards Use optional storage cards for: ● Expanding the memory of your HP iPAQ ● Adding functionality NOTE:Storage cards are not included with your HP iPAQ, and must be purchased separately. To locate information about storage cards, visit http://www.hp.com/go/ipaqaccessories. Insert a storage card 1.Remove the battery cover, slide the storage card holder and open it. 2.Place the card in the storage card holder with the metal area inserted first. 3.Slide back the storage card holder until it fits into place. If you have trouble inserting a storage card, try the following: ● Make sure you are not inserting the card at an angle. ● Make sure you insert the connection area (the metal area) first. Remove a storage card To remove a micro Secure Digital (SD) storage card from the storage slot on the HP iPAQ: 1.Close all programs that are using the storage card. 2.Press and hold the Power key to turn off your HP iPAQ. 3.Remove the battery. 40Chapter 10 Storage cards 4.Slide the storage slot cover and open it. 5.Remove the storage card from the storage card slot. NOTE:HP recommends inserting the protective plastic card that came with your HP iPAQ into the storage slot when not in use. View content of a storage card Use File Explorer to view the files that are located on your optional storage card. 1.Tap Start > Programs > File Explorer. 2.Tap Up, then select the storage card folder to see a list of files and folders. If the HP iPAQ does not recognize your storage card, try the following: ● Make sure to install any drivers that came with the storage card. ● Reset the HP iPAQ by using the stylus to lightly press the Reset button. View content of a storage card41 11 Synchronization Synchronization software If your computer is runni…

Text truncated - open the document above for the full version.

To configure the data settings: 1.Tap Start > Settings > Connections > HP iPAQ DataConnect. 2.Select a country and operator, and then tap Select to configure the network settings for the selected operator. 3.The data settings will be retrieved each time you try to connect to the Internet using GPRS. WARNING!It is not recommended to manually configure using HP iPAQ DataConnect. HP Asset Viewer Using the HP Asset Viewer application, you can view information about the system, integrated modules, and attached accessories. To access HP Asset Viewer: 1.Tap Start > Settings > System > HP Asset Viewer. 2.To view additional system information, tap the appropriate tabs. ● The Identify tab displays the serial number and the user information. ● The Memory tab displays the iPAQ device memory information. ● The Version tab displays the iPAQ device Version information ● The Display tab displays the iPAQ device display panel information. ● The System tab displays the iPAQ device system information. ● The Camera tab displays the iPAQ device Camera information. ● The Bluetooth tab displays the iPAQ device Bluetooth information. ● The WLAN tab displays the iPAQ device WLAN information. ● The GSM tab displays the iPAQ device GSM information. ● The GPS tab displays the iPAQ device GPS information. Certificate Enroller Certificate Enroller is an enhanced security feature for retrieving and registering new certificates. This application-initiated enrollment allows you to request a user certificate from a certificate server. NOTE:Certificate Enroller picks up certificate types from Active Directory as well as from the device data store. You must enter a server name for retrieving the certificate, and if required, a valid username and password. To access Certificate Enroller: 1.Tap Start > Settings > System > HP CertEnroller. 2.Use the on-screen keypad to enter server name, user name, and password. Tap ok to save the settings. NOTE:Tap Retrieve to initiate the transaction of downloading the certificate from the server. 3.Once the certificate is retrieved, tap Menu > Cancel to exit. NOTE:Tap Menu > About to view a brief description of the application, application name, version number, and copyright statement. HP applications81 Manage certificates 1.Tap Start > Settings > System > Certificates. 2.Select a certificate tab. ● The Personal tab displays your personal certificates. ● The Intermediate tab displays the intermediate certification authorities. ● The Root tab displays the root certification authorities. NOTE:To view the certificate details, tap the required certificate on each tab. HP iPAQ Tips Use HP iPAQ Tips to perform operations on your HP iPAQ in a quick and efficient manner. A tip is displayed on your screen every time you turn on your HP iPAQ. Tap Menu > Next to display the next tip. To quit the application, tap Dismiss. You can also access HP iPAQ Tips by tapping Start > Programs > HP Help and Support > HP iPAQ Quick Tips. TIP:You can also access the HP iPAQ Tips application by tapping Start > Programs > HP iPAQ Tips. HP Voice Commander Use HP Voice Commander application to look up contacts, dial a contact by name, get calendar information, play and control your music, as well as launch applications on your HP iPAQ. For more information refer Voice commands on page 24. TIP:You can also access the HP Voice Commander application by tapping Start > Programs. HP iPAQ Mobile Broadband Connect Use HP iPAQ Mobile Broadband Connect to connect your computer to the Internet using your GPRS enabled iPAQ. You need to install the HP iPAQ Mobile Broadband Connect application, which is available on the Getting Started CD. NOTE:Make sure you have installed ActiveSync 4.5 for Windows XP OS or WMDC 6.1 for Windows Vista OS on your computer before using this application. To connect your computer to the Internet using your HP iPAQ: 1.Connect your HP iPAQ to your computer using the mini-USB synchronization cable. 2.The HP iPAQ Mobile Broadband Connect icon in the system tray on your computer indicating that the iPAQ has established a connection with the computer. 3.Double click on the HP iPAQ Mobile Broadband Connect icon in the system tray on your computer. 4.Select a valid GPRS connection from the connection list on your HP iPAQ and tap Next to move to DataModem state. 5.You can then access the Internet using the Internet browser on your computer. 82Chapter 18 Applications HP Enterprise Mobility Agent (mProveDM) Use the HP Enterprise Mobility Agent to help you easily configure and manage your HP iPAQ. Visit http://redirect.hp.com/svs/rdr to download and install the HP Enterprise Mobility Agent. After you install the HP Enterprise Mobility Agent, the application will configure, download, and install different applications from the Internet on your HP iPAQ. This application requires WLAN connection with access to internet. HP iPAQ File Store You can install programs and save files to the iPAQ File Store folder, which can be accessed from the File Explorer on your HP iPAQ. Programs and files stored on your iPAQ File Store folder are not deleted even if you perform a full reset on your HP iPAQ. 1.Copy the files to be saved to the iPAQ File Store folder. 2.Tap Start > Programs > File Explorer > iPAQ File Store. 3.Tap Edit > Paste. CAUTION:iPAQ File Store may contain a special folder called hp to store system files. Do not save new files or modify existing files in the hp folder. NOTE:Before saving files to the iPAQ File Store folder, it is a good idea to determine how much memory is available in the folder. To view the amount of memory, tap Start > Settings > System > Memory > Storage Card, and then select iPAQ File Store from the list. HP PrintSmart Mobile Use HP PrintSmart Mobile to print information from your HP iPAQ mobile device to a compatible printer while away from the office and whenever you need it. HP PrintSmart Mobile application provides printing support over Bluetooth, IR, and Wi-Fi network. It also provides …

Text truncated - open the document above for the full version.

HP iPAQ Product Guide © Copyright 2007 Hewlett-Packard Development Company, L.P. HP iPAQ products are powered by Microsoft® Windows Mobile® 6 Professional with Messaging and Security Feature Pack. Microsoft Windows, the Windows logo, Outlook, Windows Mobile Device Center, and ActiveSync are trademarks of Microsoft Corporation in the U.S. and other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. SD Logo is a trademark of its proprietor. Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L.P. under license. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided ”as is” without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as an additional warranty. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Development Company, L.P. August 2007 Document Part Number: 455719–001 Table of contents 1 Register your HP iPAQ 2 Box contents 3 Components Front panel components ....................................................................................................................... 3 Top and bottom panel components ...................................................................................................... 4 Left and right side components ............................................................................................................ 5 Back panel components ....................................................................................................................... 6 4 Set up your HP iPAQ Step 1: Remove the battery cover and insert the SIM card .................................................................. 7 Step 2: Install the battery and replace the battery cover ...................................................................... 8 Step 3: Charge the battery ................................................................................................................... 9 Step 4: Turn on your HP iPAQ ............................................................................................................. 9 Protect your HP iPAQ with a password ................................................................................................ 9 Find the serial and model number ...................................................................................................... 10 Status Icons ........................................................................................................................................ 10 5 Learn the basics The Today screen .............................................................................................................................. 12 TodayPanel Lite ................................................................................................................................. 12 Enter text ............................................................................................................................................ 13 Customize your HP iPAQ ................................................................................................................... 14 Device information ............................................................................................................. 14 Enter owner information ..................................................................................................... 14 Change the regional settings ............................................................................................. 14 Adjust the volume .............................................................................................................. 15 Change the power management settings .......................................................................... 15 Dim or adjust the brightness of the backlight ..................................................................... 15 Install and remove programs ............................................................................................. 16 Open and close programs ................................................................................................. 16 Set alarms and clocks ........................................................................................................ 16 Shortcut menus .................................................................................................................. 17 Display the clock in title bar ............................................................................................... 17 Create and assign a category ............................................................................................ 17 Adjust the speed for scrolling through items in a list .......................................................... 17 View the Operating System (OS) information .................................................................................... 17 Lock and unlock your HP iPAQ .......................................................................................................... 18 Battery saving tips .............................................................................................................................. 18 6 Use your Business Navigator iii Use the keypad .................................................................................................................................. 19 Smart-Touch Navigation wheel ...............................…

Text truncated - open the document above for the full version.

8HP Photosmart Mobile HP Photosmart Mobile You can use HP Photosmart Mobile to: ● View pictures stored on your HP iPAQ or a storage card. ● Add voice or text notes to pictures. ● Print pictures. ● View a slideshow. ● Send pictures via MMS, e-mail attachments, or Bluetooth. ● Associate a picture with a contact. ● Assign a picture to the Today screen background. ● Upload an image via e-mail to snapfish. Attach a voice note to a picture To attach a voice note to a picture: 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to which you want to add a voice note. 3. Tap the (Cassette) button. 4. Tap the (Record) button on the recording toolbar. 5. Speak into the microphone to record the voice note and tap the (Stop) button when finished. 6. Tap the (Cassette) button again to close the recording toolbar. E-mail pictures 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to be sent via e-mail. NOTE:If the media file is protected by Digital Rights Management (DRM), you would not be able to view or hear it. DRM is a software that enables secure distribution and prevents illegal distribution of pictures, videos, music, movies, and ring tones over the Internet. For more information on DRM, refer to the on–screen Help by tapping Start > Help and search for DRM. 3.Tap Menu > Send... > E-mail Attachment. 4.Select the Reduce sent photo size to check box, and then select the reduction in resolution. 5.Tap Next. 36Chapter 8 HP Photosmart Mobile 6.Enter the appropriate e-mail address or use Contacts by tapping Menu > Add Recipient. 7.Enter other appropriate information, such as an e-mail title and message. 8.Tap Send. Snapfish Snapfish feature enables you to upload images from your HP iPAQ to your Snapfish account via your e-mail account. 1.Tap Start > Programs > Photosmart Mobile. 2.Tap the thumbnail to be sent via Snapfish. 3.Tap Menu > Send... > Snapfish. 4.Select the Reduce sent photo size to check box, and then select the required reduction in resolution. 5.Tap Next. 6.Select the appropriate e-mail account in the Select e-mail account list and tap Send. NOTE:To get more information about Snapfish feature, tap Help. NOTE:If the e-mail account used to send the photo to Snapfish is not registered, you will receive an e-mail with a link to a Web page that allows you to register an account. View a slideshow To view a slideshow: 1.Tap Start > Programs > Photosmart Mobile. 2. Tap the (Slideshow) button at the bottom of the screen. 3. Tap the screen to view the (Forward), (Backward), (Stop), and (Pause) buttons. Snapfish37 9Notes Write a note 1.Tap Start > Programs > Notes. NOTE:Writing must be selected as the default input mode. 2.Tap New. 3.Write your text on the screen. 4.When finished, tap ok to return to the note list. To select handwritten text, tap and hold next to the writing. As soon as dots appear and before they form a complete circle, quickly drag across the writing. If a letter crosses three ruled lines, it is treated as a drawing rather than text. Create a copy of a note To create a copy of a note: 1.Tap Start > Programs > Notes. 2.Tap the note you want to copy. 3.Select the text on the screen, tap Menu > Copy. 4.Open the required note from the note list or a new note to which the selected content is to be copied. 5.Tap Menu > Paste. If you paste the contents in a new note, a copy of the note displays in the note list. Create a voice note To create a stand-alone recording (voice note) or add a recording to a note: 1.Tap Start > Programs > Notes. 2.Do one of the following: ● To create a stand-alone recording, record from the note list. ● To add a recording to a note, create or open a note. NOTE:If the recording toolbar does not appear, tap Menu > View Recording Toolbar. 3.Tap Record. 4.Speak into the microphone located at the bottom of the unit. 5.When finished recording the note, tap Stop on the recording toolbar. 6.When finished, tap ok to return to the note list. 38Chapter 9 Notes NOTE:If recording in an open note, an icon appears in the note. If creating a stand-alone recording, an icon appears in the note list. Also, you can create a voice note in HP Photosmart Mobile and attach the note to a picture. Create a voice note39 10 Storage cards Use storage cards Use optional storage cards for: ● Expanding the memory of your HP iPAQ ● Adding functionality NOTE:Storage cards are not included with your HP iPAQ, and must be purchased separately. To locate information about storage cards, visit http://www.hp.com/go/ipaqaccessories. Insert a storage card 1.Remove the battery cover, slide the storage card holder and open it. 2.Place the card in the storage card holder with the metal area inserted first. 3.Slide back the storage card holder until it fits into place. If you have trouble inserting a storage card, try the following: ● Make sure you are not inserting the card at an angle. ● Make sure you insert the connection area (the metal area) first. Remove a storage card To remove a micro Secure Digital (SD) storage card from the storage slot on the HP iPAQ: 1.Close all programs that are using the storage card. 2.Press and hold the Power key to turn off your HP iPAQ. 3.Remove the battery. 40Chapter 10 Storage cards 4.Slide the storage slot cover and open it. 5.Remove the storage card from the storage card slot. NOTE:HP recommends inserting the protective plastic card that came with your HP iPAQ into the storage slot when not in use. View content of a storage card Use File Explorer to view the files that are located on your optional storage card. 1.Tap Start > Programs > File Explorer. 2.Tap Up, then select the storage card folder to see a list of files and folders. If the HP iPAQ does not recognize your storage card, try the following: ● Make sure to install any drivers that came with the storage card. ● Reset the HP iPAQ by using the stylus to lightly press the Reset button. View content of a storage card41 11 Synchronization Synchronization software If your computer is runni…

Text truncated - open the document above for the full version.