BCE-HS300RIM Blackberry HS-300 Bluetooth Headset

GN Netcom A/S Lautrupbjerg 7 P.O.Box 201 DK-2750 Ballerup Denmark Tel. +45 45 75 88 88 www.jabra.com „ R&D TA Engineer „ Direct +45 45759186 „ Mobile „ E-mail [email protected] A GN Great Nordic Company Applicant's declaration concerning User Manual Statements Federal Communications Commission & Industry Canada Re: application for BlackBerry HS-300 Bluetooth ® Headset FCC ID: BCE-HS300 IC: 2386C-HS300 Gentlemen, The North American version of the User Manual for the BlackBerry HS-300 Bluetooth ® Headset will include the following statements: 15. Certification and safety approvals FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Jabra (GN Netcom) will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that „ R&D TA Engineer „ Direct +45 45759186 „ Mobile „ E-mail [email protected] A GN Great Nordic Company interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device and its antenna must not be co-loaded or operating in conjunction with any other antenna or transmitter. Industry Canada Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment as per RSS-102 issue 2. Bluetooth The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN/BlackBerry is under license. Other trademarks and trade names are those of their respective owners. Aalborg, Denmark 2010-08-16 Tom Ringtved ................................. .......................... ............................... (Place) (Date) (Name - print) [Company stamp] .................................................................................................... (Legally

Getting started Drive safely! WARNING: Driving a vehicle requires your full attention to road conditions, weather, and vehicular traffic. It is important to set up your BlackBerry® Wireless Headset HS-500 prior to driving. Using this hands-free accessory may cause you to be distracted and may put you, your passengers, and occupants of other vehicles at risk of suffering bodily injury, death and/or loss of property. You should only use the hands-free accessory where permitted by law and when you will not be distracted from the proper operation of your motor vehicle. Components Change the ear piece 1. If necessary, gently pull the ear hook to remove it. 2. Gently pull off the ear gel at its edges. 3. Replace the ear gel with a new ear gel. Turn on or turn off the headset When you turn on the headset for the first time, it's in pairing mode. 1. Try different combinations of the ear gels and the ear hook to find your best fit. 2. Slide the power switch to the On position. 3. Insert the ear gel into your ear so that the headset points toward your mouth. 4. To turn off the headset, slide the power switch to the Off position. Pairing the headset Pair and connect the headset with your BlackBerry device Before you can use your headset, you need to pair it with your BlackBerry® device. When you turn on the headset for the first time, it's already in pairing mode. You can press and hold the Call control button for 5 seconds to turn on pairing mode at any time. 1. Slide the power switch to the On position. 2. On the Home screen of your BlackBerry device, click the Manage Connections icon > Set Up Bluetooth or Bluetooth Connections > Search. 3. Click BlackBerry HS-300. 4. Type the passkey 0000. 5. Press the key on the keyboard. User Guide BlackBerry Wireless Headset HS-300 EN-US ©2010 Research In Motion Limited. All rights reserved. BlackBerry®, RIM®, Research In Motion®, SureType®, SurePress™ and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Bluetooth is a trademark of Bluetooth SIG. Google Mail is a trademark of Google Inc. Hotmail and Windows Live are trademarks of Microsoft Corporation. Wi-Fi is a trademark of the Wi-Fi Alliance. All other trademarks are the property of their respective owners. This documentation is provided "as is" and without condition, endorsement, guarantee, representation or warranty, or liability of any kind by Research In Motion Limited and its affiliated companies, all of which are expressly disclaimed to the maximum extent permitted by applicable law in your jurisdiction. LANG-001 | PRINTSPEC-100 | SWD -1237256-0816015745-001 | When you've successfully completed the pairing process, you hear "Connected" through the headset. You can add your headset to the list of Trusted Devices to prevent a prompt from appearing each time you turn on the headset. For more information, click the Help icon on the Home screen of your BlackBerry device. For information about how to pair a third-party Bluetooth® enabled device with your headset, see the help that came with that device. About pairing the headset with two or more Bluetooth enabled devices The headset features Bluetooth® technology with multipoint signaling that allows you to pair with two or more Bluetooth enabled devices at the same time. The headset manages calls received from one device at a time. For example, if you're using the headset for a call on your BlackBerry device and you receive a call on another mobile device that is paired with your headset, the second call isn't directed to the headset. Using the headset Common tasks You can complete the following actions by tapping or pressing the call control button when the headset is paired and connected with your BlackBerry® device. ActionCall control button Turn on pairing modePress and hold for 3 seconds. Clear pairing listPress and hold for 5 seconds. Cancel pairing modeTap 1 time. Call tasks You can complete the following call tasks when your headset is paired and connected with your device. ActionCall control button Answer a callTap 1 time ActionCall control button Answer a second callTap 1 time Return to the first call or switch between calls Press and hold until you hear 2 beeps. Join two callsPress and hold for 3 seconds. End a callTap 2 times Mute a callTap 1 time When mute is turned on, your headset beeps periodically. Turn off muteTap 1 time Ignore a callTap 2 times Redial the last phone number Tap 2 times Voice confirmations Your headset helps confirm the actions you've completed with short statements that you hear through your headset. ActionVoice confirmation Turned on the headset"Hello" Turned on pairing mode "Pairing mode" Paired headset with your device "Connected" Ignored an incoming call "Call rejected" Turned on mute"Mute on" Turned off mute"Mute off" Switched between 2 calls "Call swapped" Redialed a phone number "Last number redial" ActionVoice confirmation Ended a call"Call ended" Bluetooth® connection is not active "Disconnected" Charged the headset"Battery low" Turned off the headset"Goodbye" Charge the headset Your headset comes partially charged and ready for use. When the battery power level is low, the rapid charge feature can give you as much as 1 hour of talk time with as little as 5 minutes of charging time. You can gain over 2 hours of talk time by charging for only 15 minutes. 1. Connect the smaller end of a micro-USB cable or smaller end of a car charger to the charging port on the headset. 2. Do one of the following: • Connect the larger end of the micro-USB cable to the USB power plug or the USB port on your computer. • Plug the larger end of the car charger into your car's power outlet. More information About automatic volume control When you use the headset for the first time, you can use the volume controls on your BlackBerry device to set the volume to a comfortable listening level. When the noise level around you changes…

Text truncated - open the document above for the full version.

GN Netcom A/S Lautrupbjerg 7 P.O.Box 201 DK-2750 Ballerup Denmark Tel. +45 45 75 88 88 www.jabra.com „ R&D TA Engineer „ Direct +45 45759186 „ Mobile „ E-mail [email protected] A GN Great Nordic Company Commercial Power of Attorney for the type approval / registration of the BlackBerry HS-300 in US and Canada The company 7 Layers AG, Ratingen, Germany – Mr. Carsten Steinroeder - has been contracted by GN Netcom A/S to obtain „Radio Type Approvals“ for the following electronic components, manufactured by GN Netcom A/S, and released by Research In Motion (RIM): BlackBerry HS-300 Bluetooth ® Headset Unless future correspondence from GN Netcom A/S directs otherwise, please extend your full cooperation to 7 Layers AG regarding matters to the above mentioned products for the period beginning 2010-08-08 through 2010-12-08. Thank you. Tom Ringtved TA Engineer _____________________________________________________________________ (name and function of person signing) Aalborg, Denmark 2010-08-16 ____________________ , ____________________ _______________________ (place) (date) (signature)

GN US (GN Netcom US) 77 Northeastern Blvd. Nashua, NH, 3062 USA www.jabra.com „ R&D Global Product Certifications „ Direct „ Mobile „ E-mail A GN Great Nordic Company Att.: Federal Communications Commission / Industry Canada RE.: Letter of authorization Hereby GN US Inc. (GN Netcom US Inc.) authorize Jørn B. Rasmussen GN Netcom A/S, Lautrupbjerg 7, DK-2750, ballerup, Denmark Lily Zhuang GN Netcom A/S Lautrupbjerg 7, DK-2750 Ballerup, Denmark Telephone: +45 45 75 88 88 and Tom Ringtved GN Netcom A/S Alfred Nobelsvej 21, DK-9220 Aalborg, Denmark Telephone: +45 45 75 88 88 to act on our behalf in all matters relating to application for equipment authorization of all our p products with brand names: J Jabra or GN usi using the BCE grantee code in USA and the 2386c grantee code in Canada. St Steen Kaiser 2008-04-29 s [email protected]

External Photos- BlackBerry HS-300

I C : 2 3 8 6 C - H S 3 0 0 Date of Change:Description of Change: Responsible: -Andy Matr. Spec: (See B.O.M.) 3D revision:Created by:Created on:Tool marking:Drawing Scale: Size: Matr. type: PC -- . 1:1 A4 GN PDM file: Approved by:Approved on:Units: Projection: HS1_SPEAKER_HOUSING_SUSPENS_2 ver:A.4 mm Description:Document No:Doc. Revision:Design Status:Page No: speaker housing pad print placement preli m 1 of 1 CONFIDENTIALITY NOTICE: Process control dimensions are marked: This document is the property of GN Netcom A/S and must be treated as confidential. The document must not be used, or disclosed to any third party, without written permission by GN Netcom A/S. Copyright © 2008 GN Netcom A/S. All rights reserved. IQC/OQC Characteristics for Evaluation: Cosmetic Standard: GSC.ST.00002 Part Marking.: GSC.PR.00102 TO RELEASE PAD PRINT 2D DRAWING 6 26-aug-2010 Note: 1. pad print color: Pantone Grey 10C H S - 3 0 0 F C C I D : B C E -HS300

Internal Photos- BlackBerry HS-300

Final Report on BlackBerry HS-300 MDE_GNNET_1005_FCCb Report Reference: August 27, 2010 Date: Test Laboratory: 7 layers AG Borsigstr. 11 DGA-PL-192/99-02 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Wilfried Klassmann Reference: MDE_GNNET_1005_FCCb 2.2 Detailed Description of OUT Samples Sample : b01 OUT Identifier BlackBerry HS-300 Sample Description Radiated Sample with Antenna HW Status 28-03157 SW Status 23h Date of Receipt 2010/08/09 Low VoltageLow Temp. 3.2 V-10 °C High Temp.High Voltage 4.2 V+60 °C Normal Temp.Nominal Voltage 3.7 V+20 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 Antenna Gain 1.0 (dBi) Frequency_high 2480 (MHz) Frequency_low 2402 (MHz) Frequency_mid 2441 (MHz) Sample : 01 OUT Identifier AC/DC Charger Sample Description AC/DC RIM part No.HDW24481001 Serial No. 00B7 HW Status Model: RIM-C-0004ADUUS-00 2.3 OUT Features Features for OUT: BlackBerry HS-300 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains BT EUT supports Bluetooth data rate of 1 Mbps with GFSK modulation in the band 2400 MHz - 2483.5 MHz EDR2 EUT supports Bluetooth using data rate of 2 Mbps with PI/4 DQPSK modulation in the band 2400 MHz - 2483.5 MHz EDR3 EUT supports Bluetooth using data rate of 3 Mbps with 8DPSK modulation in the band 2400 MHz - 2483.5 MHz Iant Integral Antenna: permanent fixed antenna, which may be built-in, designed as an indispensable part of the equipment TantC temporary antenna connector, which may be only built-in for testing, designed as an example part of the equipment Page 4 of 32 Reference: MDE_GNNET_1005_FCCb 2.4 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No. List of OUT samplesList of auxiliary equipment A01_ACDC (Conducted with AC/DC charger) 01 AC/DC RIM part No.HDW24481001 Sample: b01 Radiated Sample with Antenna Sample: B01_ACDC (Radiated with AC/DC Charger) 01 AC/DC RIM part No.HDW24481001 Sample: b01 Radiated Sample with Antenna Sample: 3 Results 3.1 General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: The EUT is automatically switched off during charging. Charging is possible via USB or dedicated AC/DC adapter. Note: 3.2 List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 15, Subpart B - Unintentional Radiators FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Page 5 of 32 Reference: MDE_GNNET_1005_FCCb 3.3 List of Test Specification Test Specification: FCC part 2 and 15 Version10-1-09 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 15 - RADIO FREQUENCY DEVICES Applicable ErrataActivate DateComment ANSI C63.4-2003 04/1/30 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and electronic Equipment in the Range of 9 kHz to 40 GHz DA 00-705 considerd 00/3/1 Public Notice: Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems Page 6 of 32 Reference: MDE_GNNET_1005_FCCb 3.4 Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 15b.1 Conducted Emissions (AC Power Line) §15.107 15b.1; Mode = transmit2010/08/17A01_ACDCLab 1Passed 15b.2 Spurious Radiated Emissions §15.109 15b.2; Mode = transmit2010/08/23B01_ACDCLab 2Passed Page 7 of 32 Reference: MDE_GNNET_1005_FCCb 3.5 Detailed Results 3.5.1 15b.1 Conducted Emissions (AC Power Line) §15.107 Test: 15b.1; Mode = transmit Result: Passed Setup No.: A01_ACDC Date of Test: 2010/08/17 16:30 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Test Equipment Environmental Conditions Temperature: 25°C Air Pressure: 1003hPa Rel. Humidity: 46% Page 8 of 32 Reference: MDE_GNNET_1005_FCCb Detailed Results: AC MAINS CONDUCTED EUT: Black Berry HS-300 (CJ090b01) Manufacturer: GN Netcom Operating Condition: charging mode Test Site: 7 layers Ratingen Operator: Doe/Giz Test Specification: ANSI C63.4; FCC 15.107 / 15.207 Comment: Start of Test: 17.08.2010 / 15:44:26 SCAN TABLE: "FCC Voltage" Short Description: FCC Voltage Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 150.0 kHz 30.0 MHz 5.0 kHz MaxPeak 20.0 ms 9 kHz ESH3-Z5 Average 0 10 20 30 40 50 60 70 80 Level [dBμV] 150k300k500k1M2M3M5M7M10M30M Frequency [Hz] MES GNN_1005_018_pre PK MES GNN_1005_018_pre AV LIM FCC 15b QP volt Voltage QP Limit LIM FCC 15b AV volt Voltage QP Limit Page 9 of 32 Reference: MDE_GNNET_1005_FCCb 3.5.2 15b.2 Spurious Radiated Emissions §15.109 Test: 15b.2; Mode = transmit Result: Passed Setup No.: B01_ACDC Date of Test: 2010/08/23 18:00 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Test Equipment Environmental Conditions Temperature: 26°C Air Pressure: 995hPa…

Text truncated - open the document above for the full version.

7 layers AG Aufsichtsratsvorsitzender Registe rge richt registered in: Borsigstrasse 11 Chairman of the Su pervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7La yers.com Wilfried Klassmann Testing Photos- BlackBerry HS-300 Photo 1: Conducted emissions powered by AC. Photo 2: Radiated emissions powered by AC 7 layers AG Aufsichtsratsvorsitzender Registe rge richt registered in: Borsigstrasse 11 Chairman of the Su pervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7La yers.com Wilfried Klassmann Photo 3: Radiated emissions 1GHz‐25GHz Photo 4: Radiated emissions 1GHz‐25GHz 7 layers AG Aufsichtsratsvorsitzender Registe rge richt registered in: Borsigstrasse 11 Chairman of the Su pervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7La yers.com Wilfried Klassmann Photo 10: FCC 15c Radiated 30‐1000MHz Photo 11: FCC 15c Radiated 1‐25GHz