BCE-HSC120WJabra HSC120W

NEED MORE HELP? For all support go to jabra.com/support GET STARTED EVOLVE2 85 FREE CONCENTRATION MUSIC Jabra.com/productivity ENGLISH .....................................1 PORTUGUÊS (BRASIL) ...........7 ESPAÑOL (MÉXICO) ..............13 РУССКИЙ .................................19 简体中文 ...................................25 한국어 .........................................31 Jabra.com/manuals The headphones and the USB dongle are pre-paired and ready for use. Plug in the USB dongle and power on the headphones. Plug the headset into USB port on the PC using the supplied USB cable, and ensure the headset is switched on. 2 1 PC (Using dongle) PC (Using USB cable ) Plug inPlug in How to connect ENGLISH Turn on Bluetooth pairing on the headphones and follow the voice instructions to pair to your smartphone. 2 sec. Smartphone Slide and hold *Button functionality depends on the Microsoft Teams client How to use Answer/end call Microsoft Teams button* Volume down Previous track (hold) Mute Volume up Next track (hold) Play/pause music Charging contact pin Sound Modes button Battery LED Bluetooth LED USB-C charging 3.5mm audio jack port On/Off/Pairing 4 3 Plug the headphones into a USB port on your PC or wall charger. It takes approx. 2.5 hours to fully charge the headphones. Charging USB cable 6 5 Desk stand Os fones de ouvido e o dongle USB são pré-pareados e estão prontos para usar. Conecte o dongle USB e ligue nos fones de ouvido. Conecte o headset na porta USB no PC usando o cabo USB fornecido, e certifique-se de que o headset esteja ligado. 8 7 PC (Usando dongle) PC (Usando o cabo USB) ConectarConectar Como conectar PORTUGUÊS Ligue o Bluetooth pareando os fones de ouvido e siga as instruções de voz para parear o seu smartphone. 2 seg. Smartphone Deslize e segure Como usar *A funcionalidade do botão depende do cliente Microsoft Teams Atender/terminar chamada Botão do Microsoft Teams* Diminuir o volume Trilha anterior (segurar) Mudo Aumentar o volume Próxima trilha (segurar) Tocar/pausar a música Pino de contato de carregamento Botão Modos de som LED da bateria LED do Bluetooth Ligar/desligar/pareamento Carregamento USB Porta de ficha de áudio de 3,5 mm 10 9 Conecte os fones de ouvido numa porta USB no seu PC ou carregador de parede. Leva aprox. 2,5 horas para carregar completamente os fones de ouvido. Carregando Cabo USB 12 11 Desk stand Los auriculares y la llave electrónica USB están presincronizados y listos para usarse. Conecte la llave electrónica USB y encienda los auriculares. Conecte el auricular a un puerto USB en la PC con el cable USB incluido, y cerciórese que el auricular esté encendido. 14 13 PC (Mediante llave electrónica) PC (Con cable USB) InsertarInsertar Cómo se conecta ESPAÑOL Encienda la sincronización vía Bluetooth en los auriculares y siga las instrucciones de voz para sincronizarlos con su teléfono inteligente. 2 seg. Teléfono inteligente Mantenga deslizado Cómo se usa *La función del botón depende del cliente de Microsoft Teams Responder/finalizar llamada Botón Microsoft Teams* Diminuir o volume Pista anterior (mantener presionado) Silencio Subir volumen Pista siguiente (mantener presionado) Reproducir/pausar música Pin de contacto de carga Botón Modos de sonido Battery LED Bluetooth LED Ligar/desligar/pareamento Carga mediante USB Puerto de audio de 3,5 mm 16 15 Conecte los auriculares en un puerto USB en su PC o un cargador de pared. Se tardan aproximadamente 2.5 horas en cargar completamente los auriculares. Carga Cable USB 18 17 Desk stand Наушники и USB-адаптер предварительно сопряжены и готовы к использованию. Вставьте USB-адаптер и затем включите наушники. Вставьте гарнитуру в USB-разъем вашего ПК с помощью прилагаемого USB-кабеля и убедитесь, что гарнитура включена. 20 19 ПК (с помощью адаптера) ПК (с помощью USB-кабеля) ПодключитеПодключите Подключение РУССКИЙ Включите сопряжение с устройством Bluetooth на наушниках и следуйте голосовым указаниям по выполнению сопряжения с Вашим смартфоном. 2 c. Смартфон Передвиньте и удерживайте Использование *Функциональность кнопки зависит от клиента Microsoft Teams Ответ / завершение вызова Кнопка Microsoft Teams* Уменьшение громкости Предыдущий трек (удержание) Отключение звука Увеличение громкости Следующий трек (удержание) Воспроизведение музыки/пауза Зарядный контакт Кнопка «Режимы звука» USB-зарядка Аудио разъем 3,5 мм Светодиодный индикатор заряда батареи Светодиодный индикатор Bluetooth Вкл./Выкл./Сопряжение 22 21 Подключите наушники к USB-разъему Вашего ПК или к сетевому зарядному устройству. Для полной зарядки наушников понадобится около 2,5 часов. Зарядка USB-кабель 24 23 Desk stand 헤드폰과 USB 동글은 이미 페어링되어 있으며 바로 사용할 수 있습니다. USB 동글을 연결하고 헤드폰의 전원을 켭니다. 제공된 USB 케이블로 헤드셋을 PC의 USB 포트에 연결하고, 헤드셋이 켜져 있는지 확인하십시오. 26 25 PC (동글 사용) PC (USB 케이블 사용) 플러그인플러그인 연결 방법 한국어 헤드폰에서 Bluetooth 페어링을 켜고, 음성 안내에 따라 스마트폰을 페어링 합니다. 2 초. 스마트폰 슬라이드한 채 유지함 *버튼 기능은 Microsoft Teams 클라이언트에 의존함 사용 방법 통화 연결/종료 Microsoft Teams 버튼* 볼륨 줄임 이전 트랙 (길게 누름) 음소거 볼륨 키움 다음 트랙 (길게 누름) 음악 재생하기/정지하기 사운드 모드 버튼 배터리 LED Bluetooth LED USB 충전 3.5mm 오디오 잭 포트 켜짐/꺼짐/페어링 충전 접점 핀 28 27 헤드폰을 컴퓨터 USB 포트 또는 전원 충전기에 연결합니다. 헤드폰을 완전히 충전하는 데에는 약 2.5시간이 걸립니다. 충전 USB 케이블 30 29 Desk stand 耳机和 USB 适配器已预先配对，可即插即用。 插入 USB 适配器，开启耳机。用随附的USB线连接耳机到个人电脑的USB端口，开启耳机。 32 31 PC (使用无线适配器) PC (使用USB线 ) 插入插入 如何连接 简体中文 在耳机上开启蓝牙配对，按照语音提示与智能手机配对。 2 秒. 智能手机 滑动并按住 *按钮功能取决于Microsoft Teams客户端 如何使用 接听/挂断电话 Microsoft Teams 按钮* 音量调低 上一曲目（按住） 静音 音量调高 下一曲目（按住） 播放/暂停音乐 充电触点 （插到充电座） 声音模式按钮 电源指示灯 蓝牙指示灯 USB 充电 3.5 毫米音频 jack 端口 开启/关闭/蓝牙 34 33 用USB线将耳机插入个人电脑或 充电器的USB 端口。 耳机完全充满电 大约需要 2.5 小时。 充电 USB线 36 35 Desk stand © 2020 GN Audio A/S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. MADE IN CHINA MODEL: HSC120W,END060W, DIV025 Declaration of Conformity can be found on www.jabra.com/doc

EN 81-03085 C WARNING! NORTH AMERICA Permanent hearing loss may result from long-term exposure to sound at high volumes. Use as low a volume as possible. Speakers are capable of delivering sounds at loud volumes and high pitched tones. Under certain circumstances, exposure to such sounds can result in permanent hearing loss damage. The volume level may vary based on conditions such as the radio you are using and volume settings. Avoid prolonged use of the speaker at excessive sound pressure levels. Please read the Safety Guidelines below prior to using the speaker. You Can Reduce the Risk of Hearing Damage by Following These Safety Guidelines During the Use of the Product: • Turn the volume control to its lowest level, when connecting the speaker and then • Slowly adjust the volume control to a comfortable level. • Keep the volume at the lowest level possible; • If increased volume is necessary, adjust the volume control slowly; and • If you experience discomfort or ringing in your ears, immediately discontinue using the speaker. With continued use at a high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort. SAFETY INFORMATION! • Use of a speaker will impair your ability to hear other sounds. Use caution while using your speaker when you are engaging in any activity that requires your full attention. • If you have a pacemaker or other electrical medical devices, you should consult your physician before using the product. • This package contains small parts that may be hazardous to children and should be kept out of reach of children at all times. The product is not a toy – never allow children to play with the product.The bags themselves or the many small parts they contain may cause choking if ingested. • Never try to dismantle the product yourself, or push objects of any kind into the product, as this may cause short circuits which could result in a fire or electric shock. WIRELESS AND CORDED SPEAKERS • None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, contact your dealer. • Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you. • If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact GN Netcom, Inc. • Never mount or store the product over any airbag deployment area, as serious injury may result when an airbag deploys. • Do not use in areas where there are explosive hazards. • Observe all signs and instructions that require an electrical device or RF radio product to be switched off in designated areas such as hospitals or aircrafts. • Dispose of the product according to local standards and regulations. Remember: Always drive safely, avoid distractions and follow local laws! Use of the speaker while operating a motor vehicle may be regulated by local laws. Check with your local authorities. Use caution while using your speaker when you are engaging in any activity that requires your full attention. While engaging in any such activity turning off your speaker will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving. BUILT-IN BATTERY CARE: Please observe the following if the product contains a battery • Your product is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. • The battery can be charged and discharged hundreds of times, but will eventually wear out. • Unplug the charger from the electrical plug and the product when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. • If left unused, a fully charged battery will lose its charge over time. • Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the battery. EN • Always try to keep the battery between 0°C and 45°C (32°F and 113°F). A product with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Battery warning! • ”Caution” – The battery used in the product may present a risk of fire or chemical burn if mistreated. • Unless otherwise specified in the user manual or quick start guide the battery in your product can not be removed or replaced by the user. Any attempt to do so is risky and may result in damage of the product. Use of other batteries may present a risk of fire or explosion and the warranty will be terminated. • Only recharge your battery with the provided approved chargers designated for this product. • Dispose of batteries according to local regulations. Please recycle when possible. • Do not dispose the battery as household waste or in a fire as it may explode. • Batteries may explode if damaged. CHARGER CARE: • Do not attempt to charge your speaker with anything other than the AC adapter provided. The use of any other types may damage or destroy the speaker and could be dangerous. Use of other chargers may invalidate any approval or warranty. • For availability of approved enhancements, please check with your dealer. • Charge the product according to the instructions supplied with the product. Important: Please refer to the user manual for a description of the charging status indicator lights. Some speakers cannot be used while charging. Charger warning! • When you disconnect the power cord or any enhancement, grasp and pull the plug, not the cord. • Never use a charger that is damaged. • Do not attempt to disas…

Text truncated - open the document above for the full version.

GN Audio USA Inc | 900 Chelmsford St, Tower 2, Floor 8 | Lowell, MA 01851 | +1 603 598 1100 Att.: Federal Communications Commission RE.: Letter of authorization Hereby GN Audio USA Inc authorize Lily Zhuang, Alex Zhou, Bill Lin and Torben Pedersen GN Audio A/S Lautrupbjerg 7, DK-2750 Ballerup, Denmark Telephone: +45 45 75 88 88 to act on our behalf in all matters relating to application for equipment authorization of all our products with brand names: Jabra and BlueParrott using the BCE grantee code in USA. Signed Ballerup, July 11, 2019 on behalf of GN Audio USA Inc. by: Name: Steen Kaiser, Regulatory Compliance

GN Audio A/S | Lautrupbjerg 7 | DK-2750 Ballerup | +45 45 75 88 88 Co. Reg. no. 15069511 | [email protected] | www.jabra.com Request for Confidentiality Date: 2020-01-24 Subject: Confidentiality Request for: FCC ID: BCE-HSC120W Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* 3 User’s Manual GN Audio USA Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 90 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Torben Pedersen (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section V regarding EXCEPTIONAL CIRCUMSTANCES. As of the October 2014 version of this document, TCB’s can not authorize these requests. The applicant should petition the FCC by submitting an inquiry as directed. A copy of this inquiry and the FCC’s response must be provided with the application. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Report No.: 19C0025R-RFUSP01V00 Page: 1 of 16 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 2 of 16 (3) EUT Photo (4) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 3 of 16 (5) EUT Photo (6) EUT Photo

Report No.: 19C0025R-RFUSP01V00 Page: 4 of 16 (7) EUT Photo (8) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 5 of 16 (9) EUT Photo (10) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 6 of 16 (11) EUT Photo (12) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 7 of 16 (13) EUT Photo (14) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 8 of 16 (15) EUT Photo (16) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 9 of 16 (17) EUT Photo (18) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 10 of 16 (19) EUT Photo (20) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 11 of 16 (21) EUT Photo (22) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 12 of 16 (23) EUT Photo (24) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 13 of 16 (25) EUT Photo (26) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 14 of 16 (27) EUT Photo (28) EUT Photo Antenna RF Chip Report No.: 19C0025R-RFUSP01V00 Page: 15 of 16 (29) EUT Photo (30) EUT Photo Report No.: 19C0025R-RFUSP01V00 Page: 16 of 16 (31) EUT Photo

Report No.: 19C0025R-RFUSP01V00 Page: 1 of 103 FCC Test Report Product Name Bluetooth Headset Model No. HSC120W FCC ID. BCE-HSC120W Applicant GN Audio A/S Address Lautrupbjerg 7, 2750 Ballerup, Denmark Date of Receipt Dec. 03, 2019 Issued Date Feb. 19, 2020 Report No. 19C0025R-RFUSP01V00 Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Report No.: 19C0025R-RFUSP01V00 Page: 2 of 103 Test Report Issued Date: Feb. 19, 2020 Report No.: 19C0025R-RFUSP01V00 Product Name Bluetooth Headset Applicant GN Audio A/S Address Lautrupbjerg 7, 2750 Ballerup, Denmark Manufacturer GN Audio A/S Model No. HSC120W FCC ID. BCE-HSC120W EUT Rated Voltage DC 3.7V (By battery) or DC 5V (By USB) EUT Test Voltage DC 3.7V (By battery) Trade Name Jabra Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Adm. Assistant / Peggy Tu ) Tested By : ( Engineer / Yunche Chen ) Approved By : ( Director / Vincent Lin ) Report No.: 19C0025R-RFUSP01V00 Page: 3 of 103 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .................................................................................................. 5 1.1. EUT Description ......................................................................................................................... 5 1.2. Operational Description ............................................................................................................. 7 1.3. Tested System Details ................................................................................................................ 8 1.4. Configuration of Tested System ................................................................................................. 9 1.5. EUT Exercise Software .............................................................................................................. 9 1.6. Test Facility .............................................................................................................................. 10 1.7. List of Test Equipment ............................................................................................................. 11 2. CONDUCTED EMISSION ................................................................................................... 13 2.1. Test Setup ................................................................................................................................. 13 2.2. Limits........................................................................................................................................ 14 2.3. Test Procedure .......................................................................................................................... 14 2.4. Uncertainty ............................................................................................................................... 14 2.5. Test Result of Conducted Emission .......................................................................................... 15 3. PEAK POWER OUTPUT ..................................................................................................... 19 3.1. Test Setup ................................................................................................................................. 19 3.2. Limit ......................................................................................................................................... 19 3.3. Test Procedure .......................................................................................................................... 19 3.4. Uncertainty ............................................................................................................................... 19 3.5. Test Result of Peak Power Output ............................................................................................ 20 4. RADIATED EMISSION ........................................................................................................ 23 4.1. Test Setup ................................................................................................................................. 23 4.2. Limits........................................................................................................................................ 24 4.3. Test Procedure .......................................................................................................................... 25 4.4. Uncertainty ............................................................................................................................... 25 4.5. Test Result of Radiated Emission ............................................................................................. 26 5. RF ANTENNA CONDUCTED TEST .................................................................................. 50 5.1. Test Setup ................................................................................................................................. 50 5.2. Limits........................................................................................................................................ 50 5.3. Test Procedure .......................................................................................................................... 50 5.4. Uncertainty ............................................................................................................................... 50 5.5. Test Result of RF Antenna Conducted Test .............................................................................. 51 6. …

Text truncated - open the document above for the full version.

Report No.:19C0025R-SAUSP01V00 Page: 1 of 22 FCC SAR Test Report Product Name ： Bluetooth Headset Model No. ： HSC120W Applicant ： GN Audio A/S Address ： Lautrupbjerg 7, 2750 Ballerup, Denmark Date of Receipt ： 2019/12/03 Issued Date ： 2019/12/17 Report No. ： 19C0025R-SAUSP01V00 Report Version ： V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Report No.:19C0025R-SAUSP01V00 Page: 2 of 22 Test Report Issued Date: 2019/12/17 Report No.: 19C0025R-SAUSP01V00 Product Name ： Bluetooth Headset Applicant ： GN Audio A/S Address ： Lautrupbjerg 7, 2750 Ballerup, Denmark Manufacturer ： GN Audio A/S Model No. ： HSC120W Trade Name ： Jabra FCC ID ： BCE-HSC120W Applicable Standard ： IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Measurement procedures ： 47CFR § 2.1093 KDB 248227 D01 v02r02 Test Result ： Max. SAR Measurement (1g) 2.4GHz: 0.022 W/kg Application Type ： Certification The above equipment has been tested by DEKRA, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's SAR characteristics under the conditions specified in this report. Documented By ： ( Adm. Assistant / Peggy Tu ) Tested By ： ( Senior Engineer / Vorana Chen ) Approved By ： ( Director / Vincent Lin ) Report No.:19C0025R-SAUSP01V00 Page: 3 of 22 TABLE OF CONTENTS Description Page 1. General Information ......................................................................................................... 4 1.1EUT Description .............................................................................................................. 4 1.2Antenna List .................................................................................................................... 4 1.3Test Environment ............................................................................................................ 5 2. SAR Measurement System .............................................................................................. 6 2.1 DASY5 System Description ........................................................................................... 6 2.1.1 Applications ................................................................................................................ 7 2.1.2 Area Scans ................................................................................................................. 7 2.1.3 Zoom Scan (Cube Scan Averaging) ........................................................................... 7 2.1.4 Uncertainty of Inter-/Extrapolation and Averaging....................................................... 7 2.2 DASY5 E-Field Probe .................................................................................................... 8 2.2.1 Isotropic E-Field Probe Specification .......................................................................... 8 2.3 Boundary Detection Unit and Probe Mounting Device ................................................... 9 2.4 DATA Acquisition Electronics (DAE) and Measurement Server .................................... 9 2.5 Robot. .......................................................................................................................... 10 2.6 Light Beam Unit ........................................................................................................... 10 2.7 Device Holder .............................................................................................................. 11 2.8 SAM Twin Phantom ..................................................................................................... 11 3. Tissue Simulating Liquid ............................................................................................ 12 3.1 The composition of the tissue simulating liquid ............................................................ 12 3.2 Tissue Calibration Result ............................................................................................. 12 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ....................................... 13 4. SAR Measurement Procedure ................................................................................... 14 4.1 SAR System Check ..................................................................................................... 14 4.1.1 Dipoles ...................................................................................................................... 14 4.1.2 System Check Result ................................................................................................ 14 4.2 SAR Measurement Procedure ..................................................................................... 15 5. SAR Exposure Limits................................................................................................. 16 6. Test Equipment List ................................................................................................... 17 7. Measurement Uncertainty ......................................................................................... 18 8. Conducted Power Measurement (Including tolerance allowed for production unit) ... 19 9. Test Results ............................................................................................................... 20 9.1 SAR Test Results Summary ......................................................................................... 20 10. SAR measurement variability .....................................................................…

Text truncated - open the document above for the full version.

Report No.: 19C0025R-RFUSP01V00 Page : 1 of 4 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test (BT mode) Back View of Conducted Test (BT mode) Report No.: 19C0025R-RFUSP01V00 Page : 2 of 4 Front View of Conducted Test (Adapter mode) Back View of Conducted Test (Adapter mode) Report No.: 19C0025R-RFUSP01V00 Page : 3 of 4 Front View of Radiated Test Back View of Radiated Test Report No.: 19C0025R-RFUSP01V00 Page : 4 of 4 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)

Report No.: 19C0025R-SAUSP01V00 Page: 1 of 14 Appendix C. Test Setup Photographs & EUT Photographs Test Setup Photographs EUT Left ear Touch Report No.: 19C0025R-SAUSP01V00 Page: 2 of 14 Depth of the liquid in the phantom-Zoom In (2.4GHz) Note: The positions used in the measurements were according to IEEE 1528-2013.