BCE-T5320BSJabra T5320BS

1 English Contents 1. Overview ..................................................2 2. Fitting the headset..........................................3 3. System Requirements and installation ............................4 4. ChargingTheHeadset ........................................7 5. Adjusting the speaker Volume, side Tone and Microphone Levels ........8 6. Using your Headset..........................................8 7. Features .................................................11 8. Reset/Pairing ..............................................11 9. Troubleshooting & FAQ......................................12 10. Maintenance, safty and disposal...............................12 11. Accessories...............................................13 Thank you Thank you for purchasing Jabra T5320, we hope you will be delighted with its operation. Please read the user guide to get started and to make best use of the headset’s many features. 81-00730 RevA 2 English 3 English 1. Overview Headset[1] Visual indicator[2] Answer/end button[3] Volume up/down[4] Ear hook[5] Mute button[6] Microphone[7] Reset button[8] Snap-on cover (replaceable) Base unit[9] Charge cradle[10] Visual indicator[11] USB cord [12] AC power adapter port [13] Ringer settings [14] Reset button 10 9 11 13 12 14 1 2 3 5 4 6 8 7 Fitting to ear 1) 2.1 Open hinged ear hook as wide as possible. 2) 2.2 Hold headset to the ear so speaker fits comfortably and microphone points toward the mouth. 2.3 Close hinged ear hook over the ear. 2.4 Bend or twist flexible rubber partoftheearhookforacom- fortable fit.Further adjustment 2.5 Ear hook hinge can be placed in either of 2 slots, to provide the best possible fit. Fitting to left ear 2.6 Pull ear hook hinge from the slot and insert it on opposite side of headset marked with L. Perform steps 2.1 – 2.4 above. 2. Fitting the headset 1) Note: Head- & neckband are also available for TS 5320, see section 11. 2) Note: The new headset is configured for use with the right ear. 2.1 2.2 2.3 2.4 2.5 2.6 4 English 5 English The GN 8120 USB requires the following operating systems and an available USB port.• Vista • Windows XP (Home and Pro.) • Windows Me (millenniumEdition)• Windows 2000• Macintosh OS 9.0.4 (or greater) The GN 8120 USB does not work with earlier releases of these operating systems. Windows XP, Windows 200 and Macintosh OS 9.0.4 (or greater) operating systems: With the Windows XP, Windows 200 and Macintosh OS 9.0.4 (or greater) oprating systems, you are ready to use your GN 8120 USB and require no software installation. Simply plug the USB connerctor into any USB port on the computer. Plug the USB connector into an available USB port on the computer, the visual indicator on the base will light green. The first time windows detects that the device is connected, it recognizes that there is new hardware required and automatically launches the Add New Hardware Wizard . Windows Me:The Add New Hardware Wizard wil launch one (1) time, installing the following driver: • USB Audio Device (INF\WDMA_USB.INF). 3.1 Installing software: for Windows Me operating systems only Plug the USB connector from into an available USB port on the computer. The first time Windows detects that the device is connected, it recognizes that there is new hardware required and automatically launches the Add New Hardware Wizard . Add New Hardware Wizard ( ) - USB Composite Device (Windows 98 SE Installation) 1. Next, the wizard automatically installs the USB Audio Device. The Add New Hardware Wizard indicates that it has found the new USB Composite Device. Click Next. 2. The Wizard prompts you to search for the best driver for your device or select the driver you want from a displayed list ( ). Select Search for the best driver for your device. Click Next. 3 Windows now searches for new drivers in a specific location ( ). Uncheck all the boxes. Click Next. 4. The Wizard indicates that it is ready to install the best driver for this device ( ). Click Next to install the driver. 5. Click Finish when the Wizard is complete. If the Wizard Cannot Locate the Driver If the Add New Hardware Wizard cannot locate the driver, insert your Windows Operating System CD-ROM into the CDROM drive. Once inserted, press Back, and check the box for your CD-ROM drive (usually D). Click Next. Click Finish when the Wizard is complete. Note: Do not unplug the USB connector from the computer while an application that uses USB audio is running. This could cause a system crash. 3. System Requirements and installation 4.1 Place headset in charge cradle and charge a minimum of 30 min. before use. A full charge takes about 2 hours. Visual indicator on headset will flash green while headset is charging, and light steady green when fully charged.4.2 Turn on headset by pressing answer/end button for 3 sec. (visual indicator will light green for 2 sec. and two “beeps” will be heard), or by placing headset in charge cradle. Turn off headset by pressing answer/end button for 3 sec. (visual indicator will light red for 2 sec. and two “beeps” will be heard). 4.14.2 3sec 4. Charging The Headset During charging of your headset please make sure your PC remains switched ON 1) 1) If you have purchased an external power adapter ( see sec. ll) then your PC does not need to be switched on while charging of the headset 6 English 7 English 6. Using your Headset • Test that the speaker volume in your headset is working and set at a comfor table level by adjusting the button on the headset or by clicking once on the speaker icon in the system tray. Click on the volume adjustment slider for system sound, and adjust the volume to a level that i s comfor table for you. • The transmit level for the microphone is controlled by software only. Go to the Control Panel. Double click on Sounds and Audio Devices (Windows XP) or Sounds and Multimedia (Windows Me and 2000) or Multimedia (Windows 98) to open the Properties window. • The Audio tab in the Properties window lets you adjust…

Text truncated - open the document above for the full version.

Date: 04-Dec-2006 Jabra T5320bs Change description File: Jabra T5330bs - T5320bs changes Ref.: OBJ Page: 1 of 1 This document and the information contained is property of RTX Telecom A/S, Denmark. Unauthorized copying is not allowed. The information in this document is believed to be correct at the time of writing. RTX Telecom A/S reserves the right at any time to change said content, circuitry and specifications. Change description Jabra T5320bs 1 Scope..........................................................................................................1 2 RF...............................................................................................................1 3 Firmware....................................................................................................1 4 Interface.....................................................................................................1 5 Power supply..............................................................................................1 6 Charge supply............................................................................................1 1 Scope This document describes the changes between Jabra T5330bs and Jabra T5320bs. 2 RF There are no changes in the RF and antenna design. 3 Firmware T5330bs and T5320bs use the same firmware. 4 Interface The phone interface has been replaced with a USB interface. 5 Power supply The T5320 can be supplied via USB only. The DC-plug does not supply any active parts of the base. 6 Charge supply The headset charge interface is supplied via USB. If the USB is not present, the headset can be supplied via the DC-plug. If both USB and the DC-plug are connected the headset will be charged via the DC-plug.

REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 1 of 7 Appendix A. Pictures REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 2 of 7

Base, US Version: Jabra T5320BS FCC ID: BCE-T5320BS IC: 2386C-T5320BS

REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 3 of 7 REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 4 of 7

ETS PRODUCT SERVICE AG TEST - REPORT FCC RULES PART 15 / SUBPART B IC RSS-GEN ISSUE 1 FCC ID: BCE-T5320BS IC: 2386C-T5320BS Test report no.: G0M20612-1050-C-1 Certificate 1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 660 Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 1 of 25 TABLE OF CONTENTS 1 General Information 2 1.1 Notes 2 1.2 Tester 4 1.3 Testing laboratory 5 1.3.1 Location 5 1.3.2 Details of accreditation status 5 1.3.3 Test location, where different 5 1.4 Details of applicant 6 1.5 Application details 6 1.6 Test item 6 1.6.1 Description of test item 6 1.6.2 Manufacturer (if different from applicant in point 1.4) 7 1.6.3 Frequency behavior 7 1.7 Test standards 7 2 Technical test 7 2.1 Summary of test results 7 2.2 Test environment 8 2.3 Test equipment utilized 9 2.4 Test results 19 2.4.1 Conducted Emission 20 2.4.2 Spurious Emission 21 2.5 Test protocols 22 2.6 Equipment Modification 24 3 Normative references 25 Annex: Pictures and diagrams Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 2 of 25 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The tests were carried out and passed in accordance to the standards: FCC part 15 : August 2006 IC RSS-Gen Issue 1 The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification (only telecommunication products). Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that its performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.6. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 3 of 25 Important Notes: Proper labeling is required for each device. Devices shall be labeled in accordance with labeling requirements pursuant to section 15.19 and section 2.1074 of the FCC rules and RSP100 of the IC- Canada specification. Devices subject to a Declaration of Conformity shall be uniquely identified by the responsible party. This identification shall not be of a format which could be confused with the FCC Identifier required on certified, notified type accepted or type approved equipment. The responsible party shall maintain adequate identification records to facilitate positive identification for each device. The user manual or instruction manual shall included also a warning statement that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Reference Section 15.21 Furthermore information to the user regarding to the interference potential of the device and about simple measures that can be taken to correct interference is required. Reference Section 15.105 The responsible party must warrant that each unit of equipment marketed under a Declaration of Conformity is identical to the unit tested and found acceptable with the standards and that the records maintained by the responsible party continue to reflect the equipment being produced under the Declaration of Conformity within the variation that can be expected due to quantity production and testing on a statistical basis. Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 4 of 25 1.2 Tester 12.01.2007 M. Schlaps ___________________________________________________________________ Date ETS-Lab. Name Signature Technical responsibility for area of testing: 12.01.2007 N. Kaspar ____________________________________________________________________ Date ETS Name Signature Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 5 of 25 1.3 Testing laboratory 1.3.1 Location ETS PRODUCT SERVICE AG Storkower Strasse 38c D- 15526 Reichenwalde Germany Telephone : + 49 33631 888 00 Telefax : + 49 33631 888 660 1.3.2 Details of accreditation status ACCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 ACCREDITED COMPETENT BODY BNETZA-REGISTRATION NUMBER: BNetzA-zS-026/96 FCC FILED TEST LABORATORY: REG. NO. 96970 INDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED CERTIFICATE NUMBER: 1983.01 BLUETOOTH QUALIFICATION TEST FACILITY (BQTF) ACCREDITED BY: BLUETOOTH QUALIFICATION REVIEW BOARD (BQRF) 1.3.3 Test location, where different Name : ./. Street : ./. Town : ./. Country : ./. Telephone : ./. Fax : ./. Teletex : ./. Registration number: G0M20612-1050-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 6 of 25 1.4 Details of applicant Name : GN Netcom A/S Street : Metalbuen 66 Town : DK-2750 Ballerup Country : Denmark Telephone : +45 7211 8653 Fax : +45 7211 8749 Contact : Mr. Jan Hildebrand E-mail : [email protected] 1.5 Application details Date of receipt of application : 04.12.2006 Date of receipt of test item : 04.12.2006 Date of test : 04.12.2006; 29.12.2006 1.6 Test item 1.6.1 Description of test item Type of product : Bluetooth Base Type identification : Jabra T5320 Serial number : without Photos : Please fin…

Text truncated - open the document above for the full version.

REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 5 of 7 REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 6 of 7 REGISTRATION NUMBER: G0M20612-1050-BlueT-71 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 7 of 7