BCGA3534Desktop Computer

Date: 31 July 2026  One Apple Park Way Cupertino, California 95014 USA v1.0 www.apple.com Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Statement of Attestation – VLP Ref: FCC numbers Model(s) FCC ID A3534 BCGA3534 To whom it may concern: Apple Inc. (“Apple”) certifies that the device listed complies with the following Very Low Power 6VL protocols and restrictions: 1. Device Protocol Attestation Statement: a. This device will prioritize the spectrum above 6.105 GHz. Channels below 6.105 GHz are disabled. The device will not transmit on channels below 6.105 GHz. b. This device employs a link-budget-based Transmit Power Control (TPC) mechanism. The TPC mechanism triggers in an environment where the received signal strength (RSSI) is above a predetermined threshold. 2. Device Operating Restrictions: a. This device is prohibited for control of or communication with unmanned aircraft systems, including drones. b. Operation of this device is prohibited on oil platforms and aircraft, except that operation in the 5.925-6.425 GHz band is permitted in large aircraft flying above 10,000 feet. For any questions, please feel free to contact me. Sincerely, ____________________ Stuart Thomas Apple Inc. Senior Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA V1.0 www.apple.com Date: 31 July 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: CFR 47 §2.911 (d)(5) Attestation Ref: FCC numbers Model(s) FCC ID A3534 BCGA3534 To whom it may concern: Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or a subsidiary of an entity identified on the Covered List. Sincerely, ____________________ Stuart Thomas Apple Inc. Senior Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA V1.0 www.apple.com Date: 31 July 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above-referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, ____________________ Stuart Thomas Apple Inc. Senior Engineering Manager [email protected]

Date: 31 July 2026  One Apple Park Way Cupertino, California 95014 USA V1.0 www.apple.com Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Statement of Attestation – Dual Client Ref: FCC numbers Model(s) FCC ID A3534 BCGA3534 To whom it may concern: Apple Inc., attest that these devices comply with the device protocol requirements and operational restrictions for indoor client 6CD. a. This device does not support the indoor subordinate (6PP) category and the maximum power does not exceed the authorised value. b. This device will only associate and connect with a low-power indoor access point, subordinate device or standard access point and never directly link to any other client devices. c. This device will always initiate transmission under the control of a low-power indoor access point, subordinate device, or standard-power access point except for brief communications before joining a network. These brief messages will only occur if the client has detected an indoor access point or subordinate device, or standard access point operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an access point it will not continually repeat the request. d. This device, when associated and connected with a low-power indoor access point, subordinate device, or standard access point, will operate at a power lower as advertised by the indoor access point, subordinate device, or standard access point: i. lower than or equal to the power advertised by the low-power indoor access point and never above the maximum output power allowed by the FCC grant for clients associated with indoor access points. ii. lower than or 6 dB below the power advertised by the standard access point as the device itself while capable of associating with a standard power AP has only the ability to use LPI powers for client devices, as there is no specific standard power implementation within the device. e. Furthermore, we fully understand this device is prohibited from the control of or communicating with unmanned aircraft systems, including drones. For any questions, please feel free to contact me. Date: 31 July 2026  One Apple Park Way Cupertino, California 95014 USA V1.0 www.apple.com Sincerely, ____________________ Stuart Thomas Apple Inc. Senior Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA v1.0 www.apple.com Date: 31 July 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Statement of Conformity for the Client in Non-Associated mode Ref: FCC numbers Model(s) FCC ID A3534 BCGA3534 To whom it may concern: Pursuant to the provisions of KDB 905462 D03, (c). Apple Inc. declares that the above-mentioned devices client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to- peer modes. Sincerely, ____________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA www.apple.com Date: 05 August 2026 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter Applicant: Apple Inc. FCC ID: BCGA3534 Model number/name: A3534 To whom it may concern The applicant hereby authorises UL International (UK) Ltd. to act as the TCB for the above application to the FCC. The applicant certifies that they are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. The applicant also acknowledges that the FCC operates a certification scheme that makes some documentation (information) accessible to the public in accordance with FCC KDB publication 726920 D01. This is information that is generally known to the public. Yours faithfully, ____________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

 One Apple Park Way Cupertino, California 95014 USA v1.0 www.apple.com Date: 31 July 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BCGA3534, Model A3534 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Descriptions, Product Specifications • Parts List (BOM) • Software Security Description • Tune Up Procedure • Antenna Gain, Antenna Locations These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device.  One Apple Park Way Cupertino, California 95014 USA v1.0 www.apple.com Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Stuart Thomas Apple Inc. EMEIA Engineering Manager [email protected]

Apple Park, Cupertino, CA 95014 October 27, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Re: Authorized Individual To whom it may concern: Pursuant to the provisions of KDB 852134 D01 Authorized Policy Form 731, I, grantee contact, hereby authorize Stuart Thomas to act on behalf of Apple Inc. for all matters relating to equipment authorization, including signing Form 731, attestations, and confidentiality request letters. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A3534 - Regulatory Label Location Note: Canada - the PMN is located on the bottom of the device. Apple Proprietary and Confidential

UL International (UK) Ltd Unit 1-4, Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, UK T: +44 (0)1256 312000 W: www.ul.com RF EXPOSURE EVALUATION REPORT FROM UL For: Apple Inc. Product: Desktop Computer FCC ID: BCGA3534 RF Exposure Evaluation Report Serial No.: UL/REGA2/16171218.9 This RF Exposure Evaluation Report Is Issued Under The Authority Of Andrew Hoare, Head of Certification: pp Written By: Marc Schmidt Checked By: Ernest Cheung Report Copy No: PDF01 Issue Date: 18 August 2026 This report may be reproduced in full. Partial reproduction may only be made with the written consent of UL. UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 2 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer This page has been left intentionally blank. UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 3 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer Table of Contents 1. Client Information ........................................................................................................... 4 2. Description Of The Apparatus And Its Operational Environment ............................... 4 3. Equipment Specifications .............................................................................................. 5 4. Methods and Procedures ............................................................................................... 6 5. Calculations .................................................................................................................... 6 6. Conclusion ...................................................................................................................... 8 UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 4 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer 1. Client Information Company Name: Apple Inc. Address: One Apple Park Way, Cupertino, California, 95014 U.S.A. Contact Name: Stuart Thomas 2. Description Of The Apparatus And Its Operational Environment Brand Name: Apple Model / Type Reference: Desktop Computer A3534 Intended Operating Environment: Residential UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 5 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer 3. Equipment Specifications Equipment Category: BT Classic / LE, Thread (IEEE 802.15.4), WLAN 2.4 GHz, WLAN 5 GHz, WLAN 6GHz and WLAN Narrow Band 5GHz and 6GHz Type of Unit: Desktop Computing Equipment Operating Frequency Range: Bluetooth Classic / LE Thread (IEEE 802.15.4) WLAN 2.4GHz WLAN 5GHz WLAN 6GHz WLAN 5GHz (Narrow Band) WLAN 6GHz (Narrow Band) 2402 - 2480 MHz 2405 - 2475 MHz 2412 - 2472 MHz 5180 - 5835 MHz 5955 - 7115 MHz 5162 - 5245 MHz / 5733 - 5844 MHz 5953 - 6420 MHz *RF Output Power (max. dBm): Bluetooth Classic / LE Thread (IEEE 802.15.4) WLAN 2.4GHz WLAN 5GHz WLAN 6GHz WLAN 5GHz (Narrow Band) WLAN 6GHz (Narrow Band) Core 0: 19.75, Core 1: 19.5, Core 2: 13, 2TxBF: 19.75 Core 0: 21, Core 1: 21, Core 2: 12 Core 0: 22.0, Core 1: 22.0, CDD/SDM: 22.0, 2TxBF: 21.0 Core 0: 20.5, Core 1: 20.5, CDD/SDM: 20.5, 2TxBF: 20.5 Core 0: 19.5, Core 1: 19.5, CDD/SDM: 19.5, 2TxBF: 19.5 Core 0: 19, Core 1: 19, 2TxBF: 19 Core 0: -2, Core 1: -1.75, 2TxBF: -7.75 *Antenna Gain (max. peak values dBi): Bluetooth Classic / LE Thread (IEEE 802.15.4) WLAN 2.4GHz WLAN 5GHz WLAN 6GHz WLAN 5GHz (Narrow Band) WLAN 6GHz (Narrow Band) SISO: WF1: 1.3 / WF2: 1.4 / WF3: 0.7 / 2TxBF: 4.36 SISO: WF1: 1.3 / WF2: 1.4 / WF3: 0.7 SISO: WF1: 1.3 / WF2: 1.4 / CDD:1.4 / SDM: 1.35 / 2TxBF: 4.36 SISO: WF1: 4.7 / WF2: 4.8 / CDD: 4.8 / SDM: 4.6 / 2TxBF: 7.6 SISO: WF1: 2.9 / WF2: 3.5 / CDD: 3.5 / SDM: 3.4 / 2TxBF: 6.41 SISO: WF1: 4.7 / WF2: 4.2 / 2TxBF: 7.46 SISO: WF1: 3.3 / WF2: 3.5 / 2TxBF: 6.41 * Specification values have been supplied by the manufacturer. The maximum power and maximum antenna gain will be used in the calculations, as these will show worst case. Except for Thread (IEEE 802.15.4), the equipment supports MIMO 2x2 modes: - Bluetooth Classic / LE, WLAN 5GHz/6GHz (Narrow Band): 2TxBF (Core 0 + Core 1) - WLAN 2.4GHz/5GHz/6GHz: CDD, SDM, 2TxBF (Core 0 + Core 1) The equipment is fitted with three antennas (WF1, WF2 and WF3). WF1 and WF2 support MIMO operation, WF3 supports SISO operation in Bluetooth Classic / LE and Thread (IEEE 802.15.4) modes only. UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 6 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer 4. Methods and Procedures Reference: FCC §1.1310 Title: Radiofrequency radiation exposure limits Reference: KDB 447498 D01 v06 Title: RF Exposure Procedures and Equipment Authorisation Policies for Mobile and Portable Devices 5. Calculations 5.1 MPE The MPE calculation to calculate the safe operating distance for the user is. S = EIRP/4 π R 2 Where S = Power density EIRP = Effective Isotropic Radiated Power (EIRP = P x G) R = distance to the centre of radiation of the antenna (safe operating distance) Power Density Requirement From FCC §1.1310 (1)(e), Table 1 (ii) – RF field strength limits for devices used by the general public (uncontrolled environment): Specified Power Density: For 1500 MHz ≤ f ≤ 100000 MHz: S req = 1.0 mW/cm 2 UL International (UK) Ltd RF EXPOSURE EVALUATION REPORT No: UL/REGA2/16171218.9 Page: 7 of 8 Issue Date: 18 August 2026 For: Apple Inc. Product: Desktop Computer VALUES SISO mode: Frequency Range (MHz) Operating Band TX Conducted Power (dBm) Antenna Gain (dBi) EIRP (mW) Power Density S mw/cm 2 Limit S reqn Calculated S n @ 20cm S n /S reqn 2402 - 2480 Bluetooth 19.75 1.4 130.32 1.00 0.026 0.026 2405 - 2475 Thread (IEEE 802.15.4) 21 1.4 173.78 1.00 0.035 0.035 2412 - 2472 WLAN 22.0 1.4 218.78 1.00 0.044 0.044 5180 - 5835 WLAN 20.5 4.8 338.84 1.00 0.067 0.067 5955 - 7115 WLAN 19.5 3.5 199.53 1.00 0.040 0.040 5162 - 5245 / 5733…

Text truncated - open the document above for the full version.

UL International (UK) Ltd Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 This laboratory is accredited by the United Kingdom Accreditation Service (UKAS). UKAS is one of the signatories to the International Laboratory Accreditation Co-operation (ILAC) Arrangement for the mutual recognition of test reports. The tests reported herein have been performed in accordance with its terms of accreditation. TEST REPORT Test Report No.: UL-EMC-RP16171218JD18A Version 1.0 Manufacturer : Apple Inc. Model No. : A3534 Test Standard : 47CFR15.107, 47CFR15.109 and ICES-003 Issue 7 October 2020 Test Result : Complied 1. This report may not be reproduced except in full, without the written approval of UL International (UK) Ltd. 2. The results in this report apply only to the sample tested as received. 3. The sample tested is in compliance with the above standards. 4. The test results in this report are traceable to national or international standards. 5. Information within this report pertaining to the manufacturer and the EUT was supplied by the manufacturer. 6. The test mode/configuration was determined by the customer and may affect the validity of results. Date of issue: 20 July 2026 Checked by: Adam Brown Senior Laboratory Engineer Company Signatory: Andrew Graham Lead Project Engineer Report Serial No: UL-EMC-RP16171218JD18A Version 1.0 Issue date: 20 JULY 2026 UL International (UK) Ltd, Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 Page 2 of 24 This page has been intentionally left blank. Report Serial No: UL-EMC-RP16171218JD18A Version 1.0 Issue date: 20 JULY 2026 UL International (UK) Ltd, Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 Page 3 of 24 TABLE OF CONTENTS 1. Customer Details ............................................................................................................ 4 2. Summary of Testing ....................................................................................................... 5 3. Equipment under Test (EUT) ......................................................................................... 6 4. Support Equipment ........................................................................................................ 7 5. Measurement Uncertainty and Decision Rule .............................................................. 8 6. Measurements, Examinations and Derived Results .................................................... 9 7. Graphical Test Results ................................................................................................. 15 8. Test Configuration Drawing ......................................................................................... 22 9. Report Revision History ............................................................................................... 24 Trademarks: The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. UL International (UK) Ltd claims no ownership of these except for any which are indicated as being the property of UL International (UK) Ltd or its subsidiaries and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by UL International (UK) Ltd of products, services or organisations associated with those trademarks. Report Serial No: UL-EMC-RP16171218JD18A Version 1.0 Issue date: 20 JULY 2026 UL International (UK) Ltd, Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 Page 4 of 24 1. CUSTOMER DETAILS Company Name: Apple Inc. Address: 1 Apple Park Way Cupertino CA 95014 USA Contact Name: Stuart Thomas Report Serial No: UL-EMC-RP16171218JD18A Version 1.0 Issue date: 20 JULY 2026 UL International (UK) Ltd, Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 Page 5 of 24 2. SUMMARY OF TESTING 2.1. Test Specification 1. Reference: 47CFR15.107 and 47CFR15.109 Title: Code of Federal Regulations - Title 47 (Telecommunication): Part 15 (Radio Frequency Devices) - Subpart B (Unintentional Radiators) – Sections 15.107 and 15.109, 1 October 2025, Edition including all applicable amendments up to 8 June 2026. 2. Reference: ICES-003 Issue 7 October 2020 Title: Information Technology Equipment (Including Digital Apparatus) – Limits and Methods of Measurement FCC Lab. Designation No. UK2011 ISED CAB ID: UK0001 2.2. Summary of Test Results FCC Reference IC Reference Measurement Type Port Result 15.107 3.2.1 Conducted Emissions AC Mains Input / Output Ports Complied 15.109 3.2.2 Radiated Emissions Enclosure Complied 2.3. Location of Testing All the measurements described in this report were performed at the premises of UL International (UK) Ltd, Unit 1 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire RG24 8AH. 2.4. Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above, nor from the requirements defined in the basic standards called up within it. Report Serial No: UL-EMC-RP16171218JD18A Version 1.0 Issue date: 20 JULY 2026 UL International (UK) Ltd, Units 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK. Telephone: +44 (0)1256 312100 Page 6 of 24 3. EQUIPMENT UNDER TEST (EUT) 3.1. Description of EUT The equipment under test (EUT) was a Desktop Computer. 3.2. Identification of Equipment under Test (EUT) ID# Description Brand Name Model No Serial No Date Received E1 Desktop Computer Apple A3534 LXLH96C69T 23/04/2026 3.3. Port Identification Port Description Possible Length (m) Type Conn…

Text truncated - open the document above for the full version.