BCGA3641Magnetic Charger

July 28 th , 2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: BCGA3641 Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that as of the date of the filing of the application, the devices for which authorization is sought do not have cybersecurity and/or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees identified on the Covered List installed on the devices, nor will it be installed by the applicant anytime after certification. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc. Apple Park, Cupertino, CA 95014

Apple Park, Cupertino, CA 95014 July 15 th , 2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Date: 7/15/2026 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b)supply any and all information needed for the evaluation of the products for which certification is sought; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e)discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f)use certification only to indicate that products are certified in conformity with specified standards; g)endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h)comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i)comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j)ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements;  k)provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l)keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m)inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

 Date: July 28 th , 2026 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams. • Electrical Schematic Diagrams. • Technical Descriptions, Product Specifications. • Antenna Locations. These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Model(s)FCC ID A3641BCGA3641 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com  Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected] Apple Inc. One Apple Park Way Cupertino, CA www.apple.com

RF Exposure Compliance Measurement Report for iPhone Charger V1.0.0 Model # FCC ID. A3641 BCGA3641 Date of Measurements: 08/19/2026-08/28/2026 Location: Apple Inc., Santa Clara, CA, USA V1.0.0 Apple Proprietary and Confidential 2 Table of Contents: 1 Test Laboratory Information ........................................................................................... 5 2 Description of the WPT Charger ...................................................................................... 5 3 Measurement Setup ....................................................................................................... 6 4 Brief Summary of Assessment Results ............................................................................. 8 5 Lists of Devices Under Test.............................................................................................. 8 Annex A: Measurement Uncertainty ...................................................................................... 9 Annex B: Measurement Equipment Verification ..................................................................... 9 Annex C: Measurement Plots ............................................................................................... 10 Annex D: Calibration Certificates .......................................................................................... 12 Annex E: Details of Measurement Equipment ....................................................................... 14 V1.0.0 Apple Proprietary and Confidential 3 List of Figures: Figure 1: SPEAG DASY8 system with MAGPy V2.0 measurement probe .................................. 6 Figure 2 Test setup for compliance measurement .......................................................................... 7 Figure 3 Measurement equipment verification setup...................................................................... 9 Figure 4 Measurement report at 127.78 kHz ................................................................................ 10 Figure 5 Measurement report at 360 kHz ..................................................................................... 11 V1.0.0 Apple Proprietary and Confidential 4 List of Tables: Table 1. Test Laboratory Information ............................................................................................. 5 Table 2. Key design parameters ...................................................................................................... 5 Table 3. Probe Specifications ......................................................................................................... 7 Table 4. Brief Summary of Measurement Results at 푑=20푚푚 from DUT ................................ 8 Table 5. List of Apple Devices Under Test .................................................................................... 8 Table 6: Uncertainty of the measurement system ........................................................................... 9 Table 7 Comparison of measured and calibrated H-field ............................................................... 9 Table 8 Measurement instruments list .......................................................................................... 14 V1.0.0 Apple Proprietary and Confidential 5 1 Test Laboratory Information Below is the information of the laboratory used for carrying out measurements: Table 1. Test Laboratory Information Organization and Address FCC Registration Detail NIST NVLAP APPLE INC., RF LABORATORY 5440 Patrick Henry Drive, Santa Clara, CA 95054 UNITED STATES FRN: 0005899216 Contact Address: Apple Inc. Corporate Compliance One Apple Park Way, MS 911-AHW Cupertino, CA 95014 United States Lab Code: 200071-0 2 Description of the WPT Charger The wireless power transfer (WPT) module, also referred to as the iPhone charger or puck, is designed to charge the iPhones via a closely coupled inductive field operating at 127.78 kHz and 360 kHz. This report presents the measurement-based assessments for the puck based on H-field levels and E-field. With the introduction of a magnets that hold the accessory in place, it is envisioned that customers may use the charging function in a mobile use condition. The wireless power transfer system consists of a transmitting coil with 11 turns and measures circular cross section. Inner radius of the coil is 10.73 mm and outer radius is 19.65 mm. Table 2. Key design parameters Item Description Max Power 10W at 127.78 kHz and 20W at 360 kHz Operating Frequency ƒ 0 = 127.78 kHz, 360 kHz Communications/Modulation Method FSK: Puck to iPhone ASK: iPhone to Puck Object Detection Mode Low Power Efficiency Test V1.0.0 Apple Proprietary and Confidential 6 3 Measurement Setup SPEAG Magnetic Amplitude and Gradient Probe System (MAGPy) V2.0 probe shown in Fig. 1 and Module WPT (V2.6) software utility is used to measure the H-field and E-field. This probe is mounted on DASY8 robotic system. The probe consists of 24 small loop sensors arranged on the corners of a 22 mm cube used for measuring H-field amplitude and gradient. The lower measuring loops are 7.5 mm from the probe tip enabling a closer measurement to the electromagnetic source. The probe also has two dipoles and a monopole to measure the E- field. Probe specifications are described in table below. The measurement uncertainty and probe verification are detailed in Annex A and B. Figure 1: SPEAG DASY8 system with MAGPy V2.0 measurement probe V1.0.0 Apple Proprietary and Confidential 7 Table 3. Probe Specifications Model MAGPy V2.0 Frequency 3 kHz – 10 MHz Measurement Center 18.5 mm from the probe tip Dimensions: (H-field sensor loop size) (E-field sensor arm length) (Overall Diameter) 1 cm 2 50 mm 60 mm Dynamic Range 0.08 to 2000 V/m for Electric field 0.1 to 3200 A/m for Magnetic field Combined Uncertainty 0.64 dB Extended Uncertainty (k=2) 1.3 dB Application Electric and Magnetic field measurement Test set-up description: The SPEAG Magnetic Amplitude and Gradient Probe System (MAGPy) V2.0 probe…

Text truncated - open the document above for the full version.

UL Solutions UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 T +1. 510.771.1000 UL.com/Solutions UL LLC © 2023. All rights reserved. Attention: FCC Office of Engineering and Technology Subject: Justification for Part 15 Antenna Test Report Dear OET Staff, The filing for this equipment code does not require an antenna gain test report or antenna gain specification sheet because only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions. Antenna gain is not used to determine compliance with Part 15 rules for this equipment code. Internal photos and supplemental proprietary information have been provided to clearly identify the antenna(s) used for this equipment code. Regards, Mark Briggs Director, Wireless Certification Services UL Verification Services

TEST REPORT Report Number : 16097213-E3V2 Applicant : APPLE INC. 1 APPLE PARK WAY CUPERTINO, CA 95014, U.S.A. Model : A3641 FCC ID : BCGA3641 IC : 579C-A3641 EUT Description : MAGNETIC CHARGER Test Standard(s) : FCC 47 CFR PART 15 SUBPART C ISED RSS-216 ISSUE 3 ISED RSS-GEN ISSUE 5 + A1 + A2 Date Of Issue: 2026/08/12 Prepared by: UL VERIFICATION SERVICES INC. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 16097213-E3V2 DATE: 2026/08/12 FCC ID: BCGA3641 IC: 579C-A3641 Page 2 of 48 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2026/07/20 Initial Issue -- V2 2026/08/12 Addressed TCB comments, pg 8, pg 11, pg 12 John Bautista REPORT NO: 16097213-E3V2 DATE: 2026/08/12 FCC ID: BCGA3641 IC: 579C-A3641 Page 3 of 48 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................................ 5 2. TEST SUMMARY .............................................................................................................................. 6 3. TEST METHODOLOGY .................................................................................................................... 6 4. FACILITIES AND ACCREDITATION ................................................................................................ 6 5. DECISION RULES AND MEASUREMENT UNCERTAINTY ........................................................... 7 5.1. METROLOGICAL TRACEABILITY ............................................................................................ 7 5.2. DECISION RULES ..................................................................................................................... 7 5.3. MEASUREMENT UNCERTAINTY ............................................................................................. 7 6. EQUIPMENT UNDER TEST ............................................................................................................. 8 6.1. DESCRIPTION OF EUT ............................................................................................................. 8 6.2. MAXIMUM E-FIELD and H-FIELD ............................................................................................. 8 6.3. WORST-CASE CONFIGURATION AND MODE ........................................................................ 8 6.4. DESCRIPTION OF TEST SETUP ............................................................................................ 10 7. TEST AND MEASUREMENT EQUIPMENT ................................................................................... 11 8. OCCUPIED BANDWIDTH ............................................................................................................... 12 9. RADIATED EMISSION TEST RESULTS ........................................................................................ 13 9.1. CONFIGURATION 1: STANDBY MODE .................................................................................. 15 9.1.1. FCC TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ......................... 15 9.1.2. ISED TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ........................ 17 9.1.3. FCC TX SPURIOUS EMISSION (30 - 1000 MHz) ............................................................ 19 9.1.4. ISED TX SPURIOUS EMISSION (30 - 1000 MHz) ........................................................... 21 9.2. CONFIGURATION 2: OPERATING MODE W/ LOAD 127.7kHz ............................................. 23 9.2.1. FCC TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ......................... 23 9.2.2. ISED TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ........................ 25 9.2.3. FCC TX SPURIOUS EMISSION (30 - 1000 MHz) ............................................................ 27 9.2.4. ISED TX SPURIOUS EMISSION (30 - 1000 MHz) ........................................................... 29 9.3. CONFIGURATION 3: OPERATING MODE W/ LOAD 360kHz ................................................ 31 9.3.1. FCC TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ......................... 31 9.3.2. ISED TX FUNDAMENTAL & SPURIOUS EMISSIONS (9 kHz - 30 MHz) ........................ 33 9.3.3. FCC TX SPURIOUS EMISSION (30 - 1000 MHz) ............................................................ 35 9.3.4. ISED TX SPURIOUS EMISSION (30 - 1000 MHz) ........................................................... 37 10. FREQUENCY STABILITY ........................................................................................................... 39 10.1. CONFIGURATION 2: OPERATING MODE W/ LOAD 127.7kHz ......................................... 39 10.2. CONFIGURATION 3: OPERATING MODE W/ LOAD 360kHz ............................................ 40 11. AC POWER LINE CONDUCTED EMISSIONS ........................................................................... 41 REPORT NO: 16097213-E3V2 DATE: 2026/08/12 FCC ID: BCGA3641 IC: 579C-A3641 Page 4 of 48 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 11.1. CONFIGURATION 1: STANDBY MODE .............................................................................. 42 11.2. CONFIGURATION 2: OPERATING MODE W/ LOAD 127.7kHz ......................................... 44 11.3. CONFIGURATION 3: OPERATING MODE W/ LOAD 360kHz .................…

Text truncated - open the document above for the full version.