BKMFBWLU61172.4GHz Wireless LAN MINI USB module

Seiko Epson Corporation 2.4GHz Wireless LAN MINI USB module WLU6117-D69(RoHS) OPERATION MANUAL Install driver 1. Copy “ROMTERM_REL_4_218_116_36_Win_XP_mfgtest” folder C:\ 2. When this module connect with NB or PC (or host device), please load driver as below path “C:\ ROMTERM_REL_4_218_116_36_Win_XP_mfgtest\” Link to Networks View available Wireless Networks as below icon, and please follow Windows instruction to connect to networks.

USA - Federal Communications Commission (FCC) FCC Radiation Exposure Statement Interference Statement These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) The devices must accept any interference that might cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the instructions, the equipment might cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:  Relocate this device.  Increase the separation between the device and the receiver.  Connect the device into an outlet on a circuit different from that of other electronics.  Consult the dealer or an experienced radio technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: BKMFBWLU6117”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Canada. Industry Canada (IC) This device complies with RSS210 of Industry Canada. CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population. Consult Safety Code 6, obtainable from health Canada’s website www.hc-sc.ca/rpb. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. T…

Text truncated - open the document above for the full version.

FCC ID: BKMFBWLU6117 Report No.: RF111024C01 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 9, 2011 Dear Application Examiner, Seiko Epson Corporation, It’s a 2.4GHz Wireless LAN MINI USB module. FCC ID: BKMFBWLU6117 would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip BCM4319GKUBG. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is BCM4319GKUBG. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: BKMFBWLU6117 Report No.: RF111024C01 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Gary Chang Technical Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2

FCC ID: BKMFBWLU6117 Report No.: RF111024C01 Operational Description This device is a 2.4GHz Wireless LAN MINI USB module, which operates in the 2.4GHz band; the maximum data rate could be up to 150Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 150Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 3.3Vdc from host equipment. The antenna is Fractal antenna without antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA111024C01 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA111024C01 MODEL NO.: WLU6117-D69(RoHS) FCC ID: BKMFBWLU6117 RECEIVED: Oct. 24, 2011 TESTED: Oct. 26 ~ Oct. 28, 2011 ISSUED: Oct. 31, 2011 APPLICANT: Seiko Epson Corporation ADDRESS: 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA111024C01 Report Format Version 4.0.0 2 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. RF EXPOSURE............................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)...................................... 5 2.2 MPE CALCULATION FORMULA ................................................................................. 5 2.3 CLASSIFICATION ........................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER............................... 5 Report No.: SA111024C01 Report Format Version 4.0.0 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Oct. 31, 2011 Report No.: SA111024C01 Report Format Version 4.0.0 4 1. CERTIFICATION PRODUCT: 2.4GHz Wireless LAN MINI USB module MODEL: WLU6117-D69(RoHS) BRAND: EPSON APPLICANT: Seiko Epson Corporation TESTED: Oct. 26 ~ Oct. 28, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: WLU6117-D69(RoHS)) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Oct. 31, 2011 Andrea Hsia / Specialist APPROVED BY : , DATE:Oct. 31, 2011 Gary Chang / Technical Manager Report No.: SA111024C01 Report Format Version 4.0.0 5 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 25.3 0.76 20 0.080 1.00

Report No.: RF111024C01 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF111024C01 MODEL NO.: WLU6117-D69(RoHS) FCC ID: BKMFBWLU6117 RECEIVED: Oct. 24, 2011 TESTED: Oct. 26 ~ Oct. 28, 2011 ISSUED: Oct. 31, 2011 APPLICANT: Seiko Epson Corporation ADDRESS: 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502 Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 66 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF111024C01 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................4 1. CERTIFICATION .......................................................................................................5 2. SUMMARY OF TEST RESULTS ...............................................................................6 2.1 MEASUREMENT UNCERTAINTY ............................................................................6 3. GENERAL INFORMATION........................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..........................................................................7 3.2 DESCRIPTION OF TEST MODES ............................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ......................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................... 11 4. TEST TYPES AND RESULTS .................................................................................12 4.1 RADIATED EMISSION MEASUREMENT ...............................................................12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT.............................................12 4.1.2 TEST INSTRUMENTS.............................................................................................13 4.1.3 TEST PROCEDURES .............................................................................................14 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................14 4.1.5 TEST SETUP...........................................................................................................15 4.1.6 EUT OPERATING CONDITIONS ............................................................................15 4.1.7 TEST RESULTS ......................................................................................................16 4.2 CONDUCTED EMISSION MEASUREMENT ..........................................................29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................29 4.2.2 TEST INSTRUMENTS.............................................................................................29 4.2.3 TEST PROCEDURES .............................................................................................30 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................30 4.2.5 TEST SETUP...........................................................................................................31 4.2.6 EUT OPERATING CONDITIONS ............................................................................31 4.2.7 TEST RESULTS ......................................................................................................32 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................34 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................34 4.3.2 TEST INSTRUMENTS.............................................................................................34 4.3.3 TEST PROCEDURE................................................................................................34 4.3.4 DEVIATION FROM TEST STANDARD ...................................................................34 4.3.5 TEST SETUP...........................................................................................................35 4.3.6 EUT OPERATING CONDITIONS ............................................................................35 4.3.7 TEST RESULTS ......................................................................................................36 4.4 MAXIMUM OUTPUT POWER .................................................................................40 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT .................................40 4.4.2 INSTRUMENTS.......................................................................................................40 4.4.3 TEST PROCEDURES .............................................................................................40 4.4.4 DEVIATION FROM TEST STANDARD ...................................................................41 4.4.5 TEST SETUP...........................................................................................................41 4.4.6 EUT OPERATING CONDITIONS ............................................................................41 4.4.7 TEST RESULTS ..............................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST 3