BMW-37740TX27MicroDrive

SAFETY PRECAUTIONS (Keep manual for future reference) This vehicle is not recommended for children under the age of 6 years. Please read all of the instructions before operating this vehicle. Always follow general safety rules while operating vehicle: avoid hitting pets, furniture or people. Do not pick up vehicle while it is in motion; keep hands, hair, and clothing away from this vehicle when the power switch is turned to the “A/B/C” position. Remove batteries when vehicle is stored. A void tire contact on painted or varnished surfaces. Mario Stunt Kart is built with an automatic shut-off function if the vehicle reaches excessive temperature during operation. If the vehicle stops after a prolonged period of operation, turn off vehicle and controller, remove batteries from vehicle and cease operation for ten (10) minutes. Reinsert batteries and resume play. BATTERY REQUIREMENTS / INSTALLATION FOR VEHICLE BATTERY REQUIREMENTS / INSTALLATION FOR TRANSMITTER 1. On the vehicle bottom, using a Phillips screw- driver (not included), loosen screw and remove the battery cover. 2. Insert 4 new AAA/LR03 batteries.(not included) 3. Replace battery cover and tighten screw. 4. T urn power switch to the “A/B/C” position. NOTE: for best performance, use of alkaline batteries is recommended. • Non-rechargeable batteries are not to be recharged; • Rechargeable batteries are only to be charged under adult supervision; • Rechargeable batteries are to be removed from the toy before being charged; • Different types of batteries or new and used batteries are not to be mixed; • Batteries are to be inserted with the correct polari ty (+ and -); • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries; • Dead batteries are to be removed from the toy; • The supply terminals are not to be short-circuited; • Only use the batteries recommended by the manufacturer or batteries of an equivalent type; • Please remove batteries from the toy if it is not to be used over a long period of time. • Protect the environment: Bring used batteries to a special colle cting point ! Thank you! 5. Avoid operating around CB radios, high voltage electrical, wires and large steel-reinforced concrete buildings. 6. Avoid running your vehicle and another vehicle on the same frequency. 7. DO NOT use in salt water. 8. Vehicle and transmitter are not waterproof. Do not immerse or use in water. 1. Best operation of vehicle is on a textured paved surface. 2. Alw ays operate your vehicle within a 50 foot range. 3. Alw ays operate your vehicle on dry surfaces away from cars and other full- size vehicl es. 4. Alw ays store your vehicle in a cool, dry place and off of painted or varnished surfaces. 1 . For proper operation, match the channel band on controller and vehicle (example: controller = A and vehicle = A) 2 . Move control buttons as indicated by solid arrows. Vehicle will move in direction as indicated by outlined arrow. 3 . NOTE: when traveling in reverse direction and changing quickly to forward, a wheelie trick can be performed. CHANNEL SELECTION AND DIRECTION CONTROLS 360 spin right 360 spin left SLOW LEFT TURN FORWARD SLOW LEFT TURN BACKWARD SLOW RIGHT TURN FORWARD SLOW RIGHT TURN BACKWARD FORWARD REVERSE PROPER OPERATION AND STORAGE OF YOUR VEHICLE 6 X AAA © TOMY Oak Brook, Illinois 60523-1940 U.S.A. All Rights Reserved. Made in China. 099-T13027-EN(Ver# 0) *Outside of the US, contact your local distributor. www.tomy.com TM & ©2010 Nintendo •Do not use rechargeable batteries; •Batteries must be removed and inserted under adult supervision; •Non-rechargeable batteries are not to be recharged; •Batteries are to be inserted with the correct polarity; •Exhausted batteries are to be removed from the toy and disposed properly; •Supply terminals are not to be short-circuited; •Different types of batteries (e.g. alkaline, standard carbon-zinc or rechargeable) or new and used batteries are not to be mixed; •Do not dispose of batteries in fire, may explode or leak. This Category II radio communication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d'Industrie Canada. Please retain this information for future reference. Please remove all packaging materials before giving to children. An adult should periodically check this toy to ensure no damage or hazard exists, if so, remove from use. Children should be supervised during play. Keep addresses and phone number for future reference. The item inside this package may var y from the photographs and/or illustrations. BATTERY SAFETY INFORMATION U.S. FCC Warning: Carrier frequency and field strength Frequency Channel: 27.145 MHz 27.145 MHz Field Strength: 74.16 dBμv/m @ 3m. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for h…

Text truncated - open the document above for the full version.

TOMY International, Inc. FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name TOMY International, Inc. Address 1111 W. 22nd Street, Suite 320, City Oak Brook Country United States request for this certification filing under: Grantee Code Product Number FCC ID: BMW -37740TX27 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description Operational Description Operational Description explaining the functioning of the block diagram Block Diagrams Block Diagrams showing the systematic building blocks of the EUT Schematics Diagrams Schematics Diagrams showing components, their values and interconnection Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Oak Brook, United States 03/15/2013 George Butler Product Integrity Manager

TOMY International, Inc. FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name TOMY International, Inc. Address 1111 W. 22nd Street, Suite 320, City Oak Brook Country United States declare that the following representative (agent): Name (person) Sam Lv Company name DONGGUAN EMTEK CO., LTD. Address No.281, Guantai Road, Nancheng District, City Dongguan Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description MicroDrive Type or Model(s) QZ130035, QZ130036 (11016, 11017, 11018, T13027) Tradename or Brand(s) Not Provided We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Oak Brook, United States 03/15/2013 George Butler Product Integrity Manager

General Appearance of the EUT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received including interference that may cause undesired operation. Canada 310 Made in China FCC ID: BMW-37740TX27 36.0 mm 12.0 mm Statement size is 36 x 12 mm color follow plastic color, which is engraving on the plastic part

TRF No. FCC 15.227/A Page 1 of 16 Report No.: ED130108020E Rev.1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF MicroDrive MODEL No.: QZ130035, QZ130036 (11016, 11017, 11018, T13027) Trademark: Not Provided FCC ID: BMW-37740TX27 REPORT NO: ED130108020E ISSUE DATE: February 26, 2013 Prepared for TOMY International, Inc. 1111 W. 22nd Street Suite 320 Oak Brook, IL 60523 United States Prepared by DONGGUAN EMTEK CO., LTD. No.281,Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 TRF No. FCC 15.227/A Page 2 of 16 Report No.: ED130108020E Rev.1.0 VERIFICATION OF COMPLIANCE Applicant: TOMY International, Inc. 1111 W. 22nd Street Suite 320 Oak Brook, IL 60523 United States Manufacturer: Jozen International Co., Ltd Product Description: MicroDrive Trademark: Not Provided Model Number: QZ130035, QZ130036 (11016, 11017, 11018, T13027) Date code: K2712JOZ01 FCC ID Number: BMW-37740TX27 Serial Number: Not Provided File Number: ED130108020E Date of Test: January 08, 2013 to February 26, 2013 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.227. The test results of this report relate only to the tested sample identified in this report. Approved By Sam Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. TRF No. FCC 15.227/A Page 3 of 16 Report No.: ED130108020E Rev.1.0 Table of Contents 1. GENERAL INFORMATION ....................................................................................... 4 1.1 PRODUCT DESCRIPTION............................................................................................................... 4 1.2 RELATED SUBMITTAL(S) / GRANT (S)............................................................................................ 4 1.3 TEST METHODOLOGY.................................................................................................................. 4 1.4 SPECIAL ACCESSORIES................................................................................................................ 4 1.5 EQUIPMENT MODIFICATIONS........................................................................................................ 5 1.6 TEST FACILITY............................................................................................................................. 5 2. SYSTEM TEST CONFIGURATION ........................................................................... 6 2.1 EUT CONFIGURATION.................................................................................................................. 6 2.2 EUT EXERCISE............................................................................................................................ 6 2.3 TEST PROCEDURE....................................................................................................................... 6 2.4 LIMITATION.................................................................................................................................. 6 2.5 CONFIGURATION OF TESTED SYSTEM.......................................................................................... 8 3. SUMMARY OF TEST RESULTS ............................................................................... 9 4. DESCRIPTION OF TEST MODES............................................................................. 9 5. CONDUCTED EMISSIONS TEST (NOT APPLICABLE IN THIS REPORT) ........ 10 5.1 MEASUREMENT PROCEDURE: .................................................................................................... 10 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 10 5.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 10 5.4 MEASUREMENT RESULT:............................................................................................................ 10 5.5 CONDUCTED MEASUREMENT PHOTOS:....................................................................................... 10 6. RADIATED EMISSION TEST .................................................................................. 11 6.1 MEASUREMENT PROCEDURE..................................................................................................... 11 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 11 6.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 12 6.4 MEASUREMENT RESULTS........................................................................................................... 13 6.5 RADIATED MEASUREMENT PHOTOS........................................................................................... 15 7. OCCUPIED BANDWIDTH ....................................................................................... 16 7.1 MEASUREMENT PROCEDURE..................................................................................................... 16 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)............................................................... 16 7.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 16 7.4 MEASUREMENT RESULTS:.......................................................................................................... 16 TRF No. FCC 15.227/A Page 4 of 16 Report No.: ED130108020E Rev.1.0 1. GENERAL INFORMATION 1.1 Product Description The TOMY International, Inc., Model: 11018 (referred to as the EUT in this report). The EUT …

Text truncated - open the document above for the full version.

Setup Photos