BP9-MS300ATMFLSMART DISPLAY

Functions and services in this manual may differ from those in the actual vehicle. Car Multimedia System USER'S MANUAL Thank you for purchasing this HYUNDAI Motors Car Multimedia System. This user’s manual explains how to use the HYUNDAI Motors Car Multimedia System. Before using the product, read the contents of this user’s manual carefully and use this product safely. 䠐The screens shown in this manual may differ with the actual screens of the product. 䠐The design and specification of this product may change without prior notification for product improvement. 䠐When transferring the vehicle to another individual, include this user’s manual so that the next driver can continue its use. 3 Table of Contents Table of Contents 3 Start Name of Each Component 5 Basic operation 8 HOME screen 12 Favorites 16 Navigation (If Equipped) Getting started with navigation 20 Searching for destination 26 Using the route menu 33 Setting for navigation 35 Media Playing USB 44 Bluetooth audio 50 Voice memo 52 Radio Listening to AM 57 Listening to FM 60 Phone Bluetooth 65 Making a call 72 Call history 76 Contacts 78 Favourites 81 Messages 84 Setup Settings 87 Phone connection Settings 88 Advanced Settings 92 General settings 95 Sound Settings 99 Display Settings 105 Others Phone Projection 110 Using Rear Camera (If Equipped) 113 Driving Info 116 Reference Precautions for Safety 118 General Information 121 Before thinking there is a product defect 123 Troubleshooting 124 Trademarks and Licenses 126 Specification 127 Open Source Software Notice 128 Table of Contents 시작하기Start 5 Name of Each Component Name of Each Component Head unit Head unit functions may vary for each model. POWER PUSH or PWR / Volume knob 䠐Press to turn the power on. 䠐When power is on, press and hold to turn power off. 䠐When power is on, press to turn Audio off. 䠐Turn left/right to control volume. HOME button (AV only) 䠐Press to go to the home screen. PHONE button (AV only) 䠐Press to go to the phone screen. MAP button (AVN only) 䠐Press to display the map screen of the current location. NAV button (AVN only) 䠐Press to move to the Navigation menu screen. b (Reset hole) 䠐Press with a thin object to reset the unit when it does not operate normally. K (Custom button) 䠐Press to move to the [Custom button] menu. After setting a desired function, press to use the desired function. A SEEK/TRACK D (W/S) button When it is pressed for a short time. 䠐Radio mode: Plays previous/next available frequency or station. 䠐Media mode: Plays previous/next file. When it is pressed and held 䠐Radio mode: Plays previous/next available frequency or station. 䠐Media mode : Rewinds or fast forwards the file. 5 6 Name of Each Component RADIO button 䠐Press to go to the radio screen. MEDIA button 䠐Press to go to the available media. SETUP button 䠐Press to go to the settings screen. Tune/Enter knob 䠐In Radio mode, turn left/right to change the frequency or station. 䠐In Media mode, turn left/right to change file and press to select the desired file. Steering Wheel Remote Control Steering wheel remote control functions may vary for each model. C / MODE button 䠐Each time this button is pressed, the Radio or Media mode is changed. 䠐If the media is not connected, it is changed in the order FM > AM > FM. 䠐When it is pressed and held, move to Advanced settings "Steering wheel MODE button". W/S button When it is pressed for a short time 䠐Radio mode: Plays previous/next Favourites. 䠐Media mode: Plays previous/next file. When it is pressed and held 䠐AM mode: Plays previous/next available frequency or station 䠐Media mode: Rewinds or fast forwards the file. i (Voice Recognition button) 䠐Press to switch to voice recognition mode. 䠐To cancel it, press and hold the button again. W button Press to operate Bluetooth hands-free function. 䠐Press to accept a call. 䠐Press to make a call from last calls. 䠐Press and hold for redialing. 7 Name of Each Component Z button 䠐Press to end the phone call during a call. 䠐Press to reject the call in the incoming call screen. 䠐Press to end Voice memo recording. J / I button 䠐Increases or decreases the volume level. d (Mute) 䠐Press to mute the sound. (It will be paused in some media modes.) 8 Basic operation Basic operation System ON/OFF The image of this product may be different from the actual product. Starting the system for the first time 1. Press the Engine Start button. Once the system is turned on, the booting process will start and the safety warning page is displayed. 2. Press [Confirm]. If you want to change the system language, press [Language]. , Note 䠐You cannot operate the system while it is booting up. It may take some time for all of the features to be ready. 䠐The safety warning page is displayed every time the ignition is turned on. The displayed warnings are related to safety, please closely read and comply with the safety warnings. 䠐If there is no operation for 10 seconds in the safety warning screen, the system automatically switches to the last played mode. Turning the system off Press and hold Power button on the head unit. To turn the system on again, press power button on the head unit. , Note Pay attention to the volume setting when turning the system on. A sudden output of extreme volume upon turning the system on could lead to hearing impairment. Adjust the volume to a suitable levels before turning off the system or set the startup volume in sound Settings menu. 9 Basic operation AV ON/OFF or Volume Adjustment AV OFF Press Power button on the head unit when the AV is ON. AV ON Press Power button on the head unit when the AV is OFF. Adjusting the volume Turn the Volume knob to control volume. , Note When you turn the system off, the current volume level is automatically memorised. Whenever you turn the system on, it operates at the memorised volume level if you do not set the startup volume in sound Sound settings menu. Resetting the system This feature is used to reset the system in the occurrence of an unforeseen error or problem.…

Text truncated - open the document above for the full version.

MOTREX CO., LTD. Seoyoung Bldg. 25, Hwangsaeul-ro 258beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Date: Apr 23, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Letter of Authorization We, the undersigned, hereby authorize Guenki Son of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BP9-MS300ATMFL including signing of all documents relating to these matters. Any and all acts carried out by Guenki Son of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from MOTREX CO., LTD. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Young Kwon Representative

MOTREX CO., LTD. Seoyoung Bldg. 25, Hwangsaeul-ro 258beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Date: Apr 23, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCC ID: BP9-MS300ATMFL To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, MOTREX CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give MOTREX CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Young Kwon Representative

FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 1 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 2 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 3

FCC ID: BP9-MS300ATMFL Copyright Ⓒ 2020 DT&C Co., Ltd. SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 1 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 2 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 3 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 4 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 5 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 6

FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 7 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 8 FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 9 <Antenna> FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 10 <Antenna> <Antenna> FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 11 <Antenna> <Antenna> FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. View 12 <Antenna> <Antenna>

FCC ID: RF function or Mode Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requriment (mW/cm 2 ) Bluetooth(1Mbps)2402.00~2480.001.503.254.752.9860.00061.000 Bluetooth(2,3Mbps)2402.00~2480.00-3.503.25-0.250.9450.00021.000 ~ ~ ~ ~ ~ ~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3~1.346141.63*10030 1.34~30824/f2.19 / f *180 / f 2 30 30~30027.50.0730.230 300~1,500f / 150030 1,500~100,0001.030 Conclusion : BP9-MS300ATMFL MPE Calculation :Bluetooth Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. Note: Please refer to the operation description for Max tune-up power. ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 2.986 S= Maximum power density(mW/cm 2 ) 0.0006 EIRP= Equivalent Isotropic Radiated Power(mW) R= Distance to the center of the radiation of the antenna(20cm) FCC ID: Mode(Worst case) Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requriment (mW/cm 2 ) 802.11n(HT20)2412.00~2462.008.503.2311.7314.8940.00301.000 802.11n(HT20)5180.00~5240.008.004.7112.7118.6640.00381.000 ~ ~ ~ ~ ~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averageing time (minutes) 0.3~1.346141.63*10030 1.34~30824/f2.19 / f *180 / f 2 30 30~30027.50.0730.230 300~1,500f / 150030 1,500~100,0001.030 Conclusion : ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 18.664S= Maximum power density(mW/cm 2 ) 0.004 EIRP= Equivalent Isotropic Radiated Power(mW) R= Distance to the center of the radiation of the antenna(20cm) BP9-MS300ATMFL MPE Calculation :WLAN Frequency range (MHz) The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. Note: Please refer to the operation description for Max tune-up power. ▪ ▪ - BP9-MS300ATMFLFCC ID: RF Exposure Compliance for simultaneous operations Worst case for simultaneous operations The exposure condition of this device is compliant with FCC rules.Conclusion : Σ of MPE ratios ≤ 1▪ Requirment = - Requirement (mW/cm2) 1.0000 Worst case(MPE ratio) Power Density (mW/cm2) - - - - - 0.0044 BT Σ of MPE ratios 2.4GHz 0.0006 NII-2ABand(Worst case) 0.0038 --- -- RF function or mode(Worst case) BT + WLAN(5GHz) 1.0000 WLAN 5GHz 0.0006 0.0038 - 0.0006 0.0038 MPE ratio (Power Density/Requirement)

Report No.: DRTFCC2004-0096 FCC ID: BP9-MS300ATMFL TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 2 / 76 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2004-0096 Apr. 27, 2020 Initial issue JungWoo Kim JaeJin Lee Report No.: DRTFCC2004-0096 FCC ID: BP9-MS300ATMFL TRF-RF-237(05)180118 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 3 / 76 Table of Contents 1. General Information ............................................................................................................... 4 1.1 Testing Laboratory .......................................................................................................................... 4 1.2 Testing Environment ....................................................................................................................... 4 1.3 Measurement Uncertainty ............................................................................................................... 4 1.4 Details of Applicant ......................................................................................................................... 5 1.5 Description of EUT .......................................................................................................................... 5 1.6 Declaration by the applicant / manufacturer ................................................................................. 5 1.7 Information about the FHSS characteristics ................................................................................. 6 1.8 Test Equipment List ......................................................................................................................... 7 1.9 Summary of Test Results ................................................................................................................ 8 1.10 Conclusion of worst-case and operation mode .......................................................................... 9 2. Maximum Peak Output Power Measurement .................................................................... 10 2.1 Test Setup ...................................................................................................................................... 10 2.2 Limit ................................................................................................................................................ 10 2.3 Test Procedure ............................................................................................................................... 10 2.4 Test Results ................................................................................................................................... 11 3. 20 dB BW .............................................................................................................................. 17 3.1 Test Setup ...................................................................................................................................... 17 3.2 Limit ................................................................................................................................................ 17 3.3 Test Procedure ............................................................................................................................... 17 3.4 Test Results ................................................................................................................................... 17 4. Carrier Frequency Separation ............................................................................................ 23 4.1 Test Setup ...................................................................................................................................... 23 4.2 Limit ................................................................................................................................................ 23 4.3 Procedure ....................................................................................................................................... 23 4.4 Test Results ................................................................................................................................... 23 5. Number of Hopping Frequencies ....................................................................................... 28 5.1 Test Setup ...................................................................................................................................... 28 5.2 Limit ................................................................................................................................................ 28 5.3 Procedure ....................................................................................................................................... 28 5.4 Test Results ................................................................................................................................... 28 6. Time of Occupancy (Dwell Time) ........................................................................................ 34 6.1 Test Setup ...................................................................................................................................... 34 6.2 Limit ................................................................................................................................................ 34 6.3 Test Procedure ............................................................................................................................... 34 6.4 Test Results ................................................................................................................................... 34 7. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission .......... 39 7.1 Test Setup ...................................................................................................................................... 39 7.2 Limit ...............…

Text truncated - open the document above for the full version.

FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement EUT Position: X-axis FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz)) FCC ID : BP9-MS300ATMFL Copyright Ⓒ 2020, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)