BXTHKB3MBLE Sensor

Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 0 EK811 user manual Suzhou eSkywireless Inc. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 1 Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF warning The device has been evaluated to meet general RF exposure requirement. This device should be installed in where that has no emission source and no metallic object obscures. RF Exposure Compliance The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or Transmitter. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 2 1 PREPARE before INSATLLATION 1.1 Product Display (image of EK811) 1.2 Packaging Inspection Open the box, check the terminal model is correct and the accessories are complete. Otherwise, please contact your dealer. 1.3 Install battery 1.3.1 Selection of battery The EK811 is a Bluetooth terminal, and it needs a button battery. please reference dealer’s opinion to select battery. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 3 1.3.2 Installation battery Open the terminal cover, and make sure the battery’s positive and negative, then insert the battery properly, and close the back cover. 1.4 Power On The terminal standard power supply is 3V. 2 Steps of AT Setting before tests Start hyper-terminal connection as follows. 1)select the comm port of PC through which EK811 is connected with PC, as the follows Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 4 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1 st running of downloaded program. 3.1) Start connection first 3.2) Restart EK810 3.3) After you see the "IIII"as the following picture, start setting. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 5 Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 6 3 INSTALL and OPERATION 3.1 Installation Method The terminal is Bluetooth products, it is recommended that you follow the instructions to install. Note: 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. The terminal installation is divided into hidden installation and open installation. When the terminal is using special vehicles, hidden installation is recommended. Otherwise, open installation is chosen. (To avoid thieves’ damage, the installation location should be hidden) ① Battery connector, Face up, put the battery reverse side down, and insert the battery. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 7 3.1.1 Open Installation The power connecting line we selected is provided by original cigarette lighter cord. 3.1.2 Hidden installation The power connecting line we selected is provided by original the main power core. And the red line has a fuse box (3A fuse) which can play a short circuit overcurrent protection role. 3.2 Installation Site The places that we suggest to install: ① The bottom of the front windshield decorative plates ② Around of front dashboard (epidermis as nonmetallic material) ③ Below the decorative panels of rear windshield ④ Inside the front bumper (should pay attention of water) ⑤ Below the wipers plate (should pay attention of water) 3.3 Installation Notes ① Avoid put together with the emission source, for example, reversing radar, anti-theft devices and other on-board communications equipment. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 8 ② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double-faced adhesive. ③ The terminal has GSM antenna and GPS antenna，so the installation should ensure that the EK810face up (that is GPS toward the sky). Besides, there is no on-metallic object that obscures above the terminal. ④ If your car’s windshield pasted with metal insulation layer or the heating layer, GPS receiving signal will be weakened, and it may cause GPS work abnormal. So please change the location you installed the terminal. Suzhou eSkywireless Inc. ES811 user manual http://www.eskywireless.com 9 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-FCC-External Photo Page 1 / 3 External Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-FCC-External Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-FCC-External Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-CE-Internal Photo Page 1 / 3 Internal Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-CE-Internal Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-CE-Internal Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2050649R-RF-US-P20V01 FCC Exposure Evaluation DeclarationTest Report Product Name BLE Sensor Trademark KAGA Model and /or type reference HKB-3M FCC ID BXTHKB3M Applicant ́s name / address KAGA Electronics Co. ,Ltd. 20 Kandamatsunagacho,Chiyoda-ku, Tokyo Test method requested, standard KDB 447498D01V06 FCC Part1.1310 Verdict Summary IN COMPLIANCE Documented By Kitty Li/Project Assistant Reviewed by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-07-15 Report template No 2050649R-RF-US-P20V01 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-US-P20V01 Page 2 / 7 INDEX page Competences and Guarantees ................................................................................................................................... 3 General conditions ...................................................................................................................................................... 3 Environmental conditions............................................................................................................................................ 3 Possible test case verdicts ......................................................................................................................................... 4 Abbreviations .............................................................................................................................................................. 4 Document History ....................................................................................................................................................... 5 Remarks and Comments ............................................................................................................................................ 5 1. RF Exposure Evaluation ......................................................................................................................................... 6 1.1. Limits ................................................................................................................................................................... 6 1.2. Test Procedure .................................................................................................................................................... 7 1.3. Test Result of RF Exposure Evaluation............................................................................................................... 7 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-US-P20V01 Page 3 / 7 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-US-P20V01 Page 4 / 7 POSSIBLE TEST CASE VERDICTS Test case does not apply to test object N/A Test object does meet requirement P (Pass) / PASS Test object does not meet requirement F (Fail) / FAIL Not measured N/M ABBREVIATIONS For the purposes of the present document, the following abbreviations apply: EUT : Equipment Under Test QP : Quasi-Peak CAV : CISPR Average AV : Average CDN : Coupling Decoupling Network SAC : Semi-Anechoic Chamber OATS : Open Area Test Site BW : Bandwidth AM : Amplitude Modulation PM : Pulse Modulation HCP : Horizontal Coupling Plane VCP : Vertical Coupling Plane U N : Nominal voltage Tx : Transmitter Rx : Receiver N/A : Not Applicable N/M : Not Measured DEKR…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2050649R-RF-US-P06V02 FCC TEST REPORT & ISED TEST REPORT Product Name BLE Sensor Trademark KAGA Model and /or type reference HKB-3M FCC ID BXTHKB3M Applicant ́s name / address KAGA Electronics Co. ,Ltd. 20 Kandamatsunagacho,Chiyoda-ku, Tokyo Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 KD558074 D01 15.247 Meas Guidance v05r02 Verdict Summary IN COMPLIANCE Documented By Kitty Li/Project Assistant Reviewed by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-07-15 Report template No Template_FCC 15.247-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2050649R-RF-US-P06V02 Page 2 / 54 INDEX page General conditions ...................................................................................................................................................... 4 Environmental conditions ............................................................................................................................................ 4 Possible test case verdicts .......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................. 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty ................................................................................................................................................................. 9 1 General Information.......................................................................................................................................... 10 1.1 General Description of the Item(s) .......................................................................................................... 10 1.2 Antenna Information ............................................................................................................................... 11 1.3 Model difference description ................................................................................................................... 12 1.4 Channel List ........................................................................................................................................... 13 2 Description of Test Setup ................................................................................................................................. 14 2.1 Operating mode(s) used for tests ............................................................................................................ 14 2.2 Auxiliary equipment / Test software for the EUT ...................................................................................... 14 2.3 Test Configuration / Block diagram used for tests ................................................................................... 15 2.4 Testing process ...................................................................................................................................... 16 3 Verdict summary section .................................................................................................................................. 17 3.1 Standards............................................................................................................................................... 17 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ......................................................................... 17 3.3 Overview of results ................................................................................................................................. 17 3.4 Test Facility ............................................................................................................................................ 18 4 Test Results ..................................................................................................................................................... 19 4.1 AC Power Line Conducted Emission ...................................................................................................... 19 4.1.1 Limit ............................................................................................................................................. 19 4.1.2 Test Setup .................................................................................................................................... 19 4.1.3 Test Procedure ............................................................................................................................. 19 4.1.4 Test Data ..................................................................................................................................... 20 4.2 Emissions in restricted frequency bands ................................................................................................. 21 4.2.1 Limit ............................................................................................................................................. 21 4.2.2 Test Setup .…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.:2050649R-RF-FCC-Test Photo Page 1 / 2 Test Photographs Description: Radiated Emission Test Setup for Below 1GHz Description: Radiated Emission Test Setup for 1~18GHz DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.:2050649R-RF-FCC-Test Photo Page 2 / 2 Description: Radiated Emission Test Setup for Above 18GHz