C3K1083Microsoft Natural Wireless Laser Mouse 6000

 0206 Part No. X00-00000 M Microsoft Product Guide Read this guide for important safety and health information and the terms of the Warranty that cover the Microsoft ® device that you have purchased. Warning Failure to properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to www.microsoft.com/hardware or refer to the Microsoft Help and Support section for contact information. This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: Important Safety Information AC-Powered Devices Battery-Powered Devices Wireless Devices Keyboard and Mouse Devices Devices with Laser Pointers All Devices Healthy Computing Guide Laser and LED Specifications Regulatory Information Radio Frequency Technical Specifications Radio and TV Interference Regulations Disposal of Waste Electrical and Electronic Equipment Patent Information Microsoft Help and Support Limited Warranty This symbol identifies safety and health messages in this Product Guide and other product manuals. Important Safety Information AC-Powered Devices These precautions apply to all products that plug into a standard wall power outlet. Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. 2 To select an appropriate power source for your device: ● Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center. ● Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician. ● Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. ● Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit. To avoid damaging the power cords and power supply: ● Protect the power cords from being walked on. ● Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. ● Do not jerk, knot, sharply bend, or otherwise abuse the power cords. ● Do not expose the power cords to sources of heat. ● Keep children and pets away from the power cords. Do not allow them to bite or chew on them. ● When disconnecting the power cords, pull on the plug—do not pull on the cord. If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time. For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it stops. 2 Plug the other end of the AC power cord into the wall outlet. Battery-Powered Devices These precautions apply to all products that use rechargeable or disposable batteries. Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: ● Keep batteries out of reach of children. ● Do not heat, open, puncture, mutilate, or dispose of batteries in fire. ● Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries). ● Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.  ● Remove the batteries if they are worn out or before storing your device for an extended period of time. ● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations. ● If a battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup. Disposable (non-rechargeable) batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries. Rechargeable batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided. ● Charge only with the recharger provided with the product. Wireless Devices Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless devices can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed and the wireless device is turned on (if it has an on/off switch). Keyboard and Mouse Devices Health Warning Use of a keyboard or mouse may be linked to serious injuries or disorders. When using a computer, as with many activities, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensation, or stiffness, DO NOT IG…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

ARTWORK NUMBERDESCRIPTION PROPRIETARY NOTE TOLERENCES DWN./DATE SOFTWAREVERSION DRAWING NUMBERREVISION THE INFORMATION CONTAINEDHEREONIS CONFIDENTIAL, IS SUBMITTEDIN CONFIDENCE,AND IS PROPRIETARY INFORMATIONOFMICROSOFTCORPORA- TION,AND SHALL ONLY BE USED IN THEFURTHERANCEOF,THECONTRACTOF WHICHTHIS DRAWING FORMS A PART,AND SHALL NOT,WITHOUTMICROSOFT CORPORATION'S PRIOR WRITTENAPPROVAL, BE REPRODUCEDORINANYWAY USED IN WHOLEOR IN PARTINCONNECTIONWITH SERVICES OR EQUIPMENT OFFEREDFOR SALE OF FURNISHED TO OTHERS,THEINFORMATIONCONTAINED HEREONMAY NOT BE DISCLOSEDTOATHIRDPARTYWITHOUTCONSENTOF MICROSOFT CORPORATION,ANDTHEN, ONLYPURSUANTTOAMICROSOFT APPROVED NONDISCLOSURE AGREEMENT. UNLESS OTHERWISE SPECIFIED DIMENSIONSARE IN MILLIMETERS FILE NAME 1 inch x 1 inch reference ARTWORK,INSERT,AGENCY, MOUSE BOTTOM CASE OUTLINE DOES NOT PRINT 2:1 1:1 N/A AW809696-001_OUTLINE.pdf 7/10/2006 Brian Greller, RMB Vivid, Inc. Adobe Illustrator 11.0 AW809696-001 A ARTWORK NUMBERDESCRIPTION PROPRIETARY NOTE TOLERENCES DWN./DATE SOFTWAREVERSION DRAWING NUMBERREVISION THE INFORMATION CONTAINEDHEREONIS CONFIDENTIAL, IS SUBMITTEDIN CONFIDENCE,AND IS PROPRIETARY INFORMATIONOFMICROSOFTCORPORA- TION,AND SHALL ONLY BE USED IN THEFURTHERANCEOF,THECONTRACTOF WHICHTHIS DRAWING FORMS A PART,AND SHALL NOT,WITHOUTMICROSOFT CORPORATION'S PRIOR WRITTENAPPROVAL, BE REPRODUCEDORINANYWAY USED IN WHOLEOR IN PARTINCONNECTIONWITH SERVICES OR EQUIPMENT OFFEREDFOR SALE OF FURNISHED TO OTHERS,THEINFORMATIONCONTAINED HEREONMAY NOT BE DISCLOSEDTOATHIRDPARTYWITHOUTCONSENTOF MICROSOFT CORPORATION,ANDTHEN, ONLYPURSUANTTOAMICROSOFT APPROVED NONDISCLOSURE AGREEMENT. UNLESS OTHERWISE SPECIFIED DIMENSIONSARE IN MILLIMETERS FILE NAME 1 inch x 1 inch reference ARTWORK,LABEL,PRODUCT, WRLS LASER MSE 6000,RETAIL OUTLINE DOES NOT PRINT 2:1 1:1 N/A AW807278-001_OUTLINE.pdf 7/12/2006 Brian Greller, RMB Vivid, Inc. Adobe Illustrator 11.0 AW807278-001 A ARTWORK NUMBERDESCRIPTION PROPRIETARY NOTE TOLERENCES DWN./DATE SOFTWAREVERSION DRAWING NUMBERREVISION THE INFORMATION CONTAINEDHEREONIS CONFIDENTIAL, IS SUBMITTEDIN CONFIDENCE,AND IS PROPRIETARY INFORMATIONOFMICROSOFTCORPORA- TION,AND SHALL ONLY BE USED IN THEFURTHERANCEOF,THECONTRACTOF WHICHTHIS DRAWING FORMS A PART,AND SHALL NOT,WITHOUTMICROSOFT CORPORATION'S PRIOR WRITTENAPPROVAL, BE REPRODUCEDORINANYWAY USED IN WHOLEOR IN PARTINCONNECTIONWITH SERVICES OR EQUIPMENT OFFEREDFOR SALE OF FURNISHED TO OTHERS,THEINFORMATIONCONTAINED HEREONMAY NOT BE DISCLOSEDTOATHIRDPARTYWITHOUTCONSENTOF MICROSOFT CORPORATION,ANDTHEN, ONLYPURSUANTTOAMICROSOFT APPROVED NONDISCLOSURE AGREEMENT. UNLESS OTHERWISE SPECIFIED DIMENSIONSARE IN MILLIMETERS FILE NAME 1 inch x 1 inch reference ARTWORK,AGENCY LABEL, WRLS LASER MSE 6000,RETAIL OUTLINE DOES NOT PRINT 2:1 1:1 N/A AW807279-001_OUTLINE.pdf 7/03/2006 Brian Greller, RMB Vivid, Inc. Adobe Illustrator 11.0 AW807279-001 A

Report No.: RF950705L141Report Format Version 2.0.4 FCC TEST REPORT REPORT NO.: RF950705L14 MODEL NO.: 1083 RECEIVED: Jul. 05, 2006 TESTED: Jul. 06, 2006 ISSUED: Jul. 10, 2006 APPLICANT: Microsoft Corporation ADDRESS: One Microsoft Way, Redmond, WA 98052-6399, U.S.A. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF950705L142Report Format Version 2.0.4 Table of Contents 1CERTIFICATION.............................................................................................3 2SUMMARY OF TEST RESULTS.....................................................................4 2.1MEASUREMENT UNCERTAINTY..................................................................4 3GENERAL INFORMATION.............................................................................5 3.1D GENERAL DESCRIPTION OF EUT............................................................5 3.2DESCRIPTION OF TEST MODES..................................................................6 3.2.1CONFIGURATION OF SYSTEM UNDER TEST.............................................6 3.2.2TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................7 3.3GENERAL DESCRIPTION OF APPLIED STANDARDS.................................7 3.4DESCRIPTION OF SUPPORT UNITS............................................................7 4TEST PROCEDURE AND RESULT................................................................8 4.1CONDUCTED EMISSION MEASUREMENT..................................................8 4.2RADIATED EMISSION MEASUREMENT.......................................................8 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT.....................................8 4.2.2TEST INSTRUMENT.......................................................................................9 4.2.3TEST PROCEDURE.....................................................................................10 4.2.4TEST SETUP.................................................................................................11 4.2.5EUT OPERATING CONDITION.....................................................................11 4.2.6TEST RESULTS............................................................................................12 4INFORMATION ON THE TESTING LABORATORIES..................................24 APPENDIX-A....................................................................................................................A-1 Report No.: RF950705L143Report Format Version 2.0.4 1 CERTIFICATION PRODUCT : Microsoft ® Natural™ Wireless Laser Mouse 6000 BRAND NAME : Microsoft ® MODEL NO. : 1083 APPLICANT : Microsoft Corporation TESTED : Jul. 06, 2006 TEST SAMPLE : ENGINEERING SAMPLE STANDARDS : FCC Part 15, Subpart C (Section 15.227), ANSI C63.4-2003 Canada RSS-310 Issue 1 (September 2005) The above equipment (Model: 1083) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY :, DATE:Jul. 10, 2006 ( Windy Chou ) TECHNICAL ACCEPTANCE:, DATE:Jul. 10, 2006 Responsible for RF ( Long Chen ) APPROVED BY:, DATE: Jul. 10, 2006 ( Gary Chang / Supervisor ) Report No.: RF950705L144Report Format Version 2.0.4 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPERESULTREMARK 15.207Conducted Emission TestNA Power supply is 1.5Vdc from batteries 15.227 15.209 Radiated Emission TestPASS Minimum passing margin is –15.80dB at 297.50MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENTFREQUENCYUNCERTAINTY 30MHz ~ 200MHz (Horizontal)3.56 dB 30MHz ~ 200MHz (Vertical)3.71 dB 200MHz ~1000MHz (Horizontal)3.73 dB 200MHz ~1000MHz (Vertical)3.71 dB 1GHz ~ 18GHz2.26 dB Radiated emissions 18GHz ~ 40GHz1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF950705L145Report Format Version 2.0.4 3 GENERAL INFORMATION 3.1 D GENERAL DESCRIPTION OF EUT PRODUCT Microsoft ® Natural™ Wireless Laser Mouse 6000 MODEL NO. 1083 FCC ID C3K1083 POWER SUPPLY 1.5Vdc from batteries for transmitter MODULATION TYPE FSK CARRIER FREQUENCY OF EACH CHANNEL 27.045 / 27.145 CHANNEL SPACING 100kHz NUMBER OF CHANNEL 2 ANTENNA TYPE PCB antenna DATA CABLE NA I/O PORTS USB ASSOCIATED DEVICES NA NOTE: 1. This report only covered the EUT of Mouse (Model: 1083, FCC ID: C3K1083). 2. Pluto Configuration Information: Configuration #:Comments: EV2 phase Mouse unit for formal report Manufacturer Component type Part no. Revision no. Description BOM (if known) MicrosoftMouseModel: 1083 STOptical Sensor11300398000BCHIP IC Aviator ASIC TQFP-32L11300398000 STMicrocontroller11300398000BCHIP IC Aviator ASIC TQFP-32L11300398000 ULMLaserULM850NAVCSEL (850nm)10740114200 MicrosoftfirmwareBentley_EV2 20060621-A PCB1023057720008 SPCB, BENTLEY, TX, AVIAT, S2L, 101.1X90.8, OM05057U01 10230577201 KYEPCB Assy2000087820004PCBA, BENTLEY, TX20000878200 Case tooling MerrichBottom Case15120605201T1Case, Bottom-Resin15120605201…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST