C3K1446Wireless Transceiver

1 Contents Microsoft Product Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Microsoft 产品指南 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Microsoft 제품 가이드 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Microsoft 產品指南 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Microsoft CËnmX {ZX}{eH$m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 คูมือผลิตภัณฑ Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 International Technical Support Numbers (Partial List Only) . . . . . . . . .60 0409 PartNo. X15-63623-01 X156362301mnl_en.indd 14/8/09 7:13:55 PM 2 Microsoft Product Guide Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft ® device that you have purchased. Warning Failure to properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to www.microsoft.com/hardware or refer to the Microsoft Help and Support section for contact information. This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: Important Safety Information AC-Powered Devices Battery-Powered Devices Headset Devices Webcam Devices Wireless Devices Game Controllers, Keyboards, and Mouse Devices Devices with Laser Pointers All Devices Laser and LED Specifications Regulatory Information Radio Frequency Technical Specifications Disposal of Waste Batteries and Electrical and Electronic Equipment Patent Information Customer Support Options Limited Warranty This symbol identifies safety and health messages in this Product Guide and other product manuals . Important Safety Information AC-Powered Devices These precautions apply to all products that plug into a standard wall power outlet. Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. X156362301mnl.indb 24/8/09 6:56:58 PM 3 To select an appropriate power source for your device: ● Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center. ● Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician. ● Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. ● Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit. To avoid damaging the power cords and power supply: ● Protect the power cords from being walked on. ● Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. ● Do not jerk, knot, sharply bend, or otherwise abuse the power cords. ● Do not expose the power cords to sources of heat. ● Keep children and pets away from the power cords. Do not allow them to bite or chew on them. ● When disconnecting the power cords, pull on the plug—do not pull on the cord. If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time. For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it stops. 2 Plug the other end of the AC power cord into the wall outlet. Battery-Powered Devices These precautions apply to all products that use rechargeable or disposable batteries. Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: ● Keep batteries out of reach of children. ● Do not heat, open, puncture, mutilate, or dispose of batteries in fire. ● Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries). ● Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns. X156362301mnl.indb 34/8/09 6:56:59 PM 4 ● Remove the batteries if they are worn out or before storing your device for an extended period of time. ● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations. ● If a battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup. Disposable (non-rechargeable) batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries. Rechargeable batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided. ● Charge only with the recharger provided with…

Text truncated - open the document above for the full version.

Attestation for FCC Declaration of Conformity FCC ID: C3K1446 Date: Jan. 22, 2010 Please be notified that we, the undersigned, Microsoft Corporation declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is FD981109L09. Testing in regards to this report was done by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, located at No.19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333 Taiwan R.O.C.which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Name : Albert Huang Title : EMC/Safety Compliance Engineer Dept : MACH Compliance team Phone : +86-755 86118676 E-mail : [email protected] Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399

Microsoft Corporation is an equal opportunity employer. Subject: Authorized signatories January 7, 2009 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 A G E N C Y A U T H O R I Z A T I O N L E T T E R To whom it may concern, We, the undersigned, Microsoft® Corporation hereby authorize the following, to act on our behalf, as our agent, in all matters relating to all processes required according to FCC Part 15C for Microsoft® Corporation products (Grantee Code:C3K): Michael Boucher San Chen Ted Eckert Pam Galvan Albert Huang Bill Huang Daniel Lamanuzzi Joel Lachance Brad Sybouts Kitty Tam Eugene Wong If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Stephen M. Stegner E &D Compliance Manager, EMC and Safety Microsoft Corporation TEL: (425) 706-2697 FAX: (425) 936-7329 E-mail: [email protected]

AUTHORIZATION LETTER FCC ID: C3K1446 Date: January 19th, 2010 To whom it may concern: We, the undersigned, Microsoft ® Corporation hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original data. If you have any questions regarding the authorization, please don’t hesitate to contact me. Thank you. Sincerely, Name : Albert Huang Title : EMC/Safety Compliance Engineer Dept : MACH Compliance team Phone : +86-755 86118676 E-mail : [email protected] Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399

January 20, 2010 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia , Maryland 21046 Subject: Short-term confidentiality request regarding application for certification of FCC ID: C3K1427, C3K1446, C3K1447 TO WHOM IT MAY CONCERN Pursuant to DA 04-1705 of the Commission’s public notice, we request short- term confidential treatment for the following information until July 19th, 2010 in order to ensure sensitive business information remains confidential until the actual marketing of the device: • External Photos • Test Setup Photos • User’s Manual • Internal Photos Sincerely, Eugene Wong Compliance Manager Microsoft Corporation TEL: +86 755 8611 8929 FAX: +86 755 2655 1121 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4

Report No.: RF981109L10 1 Report Format Version 3.0.0 FCC TEST REPORT REPORT NO. :RF981109L10 MODEL NO. : 1446 RECEIVED : Nov. 09, 2009 TESTED :Nov. 09 ~ Nov. 30, 2009 ISSUED :Dec. 14, 2009 APPLICANT : Microsoft Corporation ADDRESS : One Microsoft Way, Redmond WA 98052-6399, U.S.A ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 41 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF981109L10 2 Report Format Version 3.0.0 Table of Contents 1. CERTIFICATION .......................................................................................................... 3 2. SUMMARY OF TEST RESULTS .................................................................................. 4 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 4 3. GENERAL INFORMATION........................................................................................... 5 3.1 GENERAL DESCRIPTION OF EUT............................................................................. 5 3.2 DESCRIPTION OF TEST MODES............................................................................... 6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................. 9 3.4 DESCRIPTION OF SUPPORT UNITS ......................................................................... 9 4. TEST TYPES AND RESULTS .................................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 10 4.1.2 TEST INSTRUMENTS ............................................................................................... 11 4.1.3 TEST PROCEDURES ................................................................................................ 12 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................... 12 4.1.5 TEST SETUP ............................................................................................................. 13 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 13 4.1.7 TEST RESULTS ......................................................................................................... 14 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 27 4.2.2 TEST INSTRUMENTS ............................................................................................... 27 4.2.3 TEST PROCEDURES ................................................................................................ 28 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 28 4.2.5 TEST SETUP ............................................................................................................. 29 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 29 4.2.7 TEST RESULTS ......................................................................................................... 30 4.3 BAND EDGES MEASUREMENT ............................................................................... 36 4.3.1 LIMITS OF BAND EDGES MEASUREMENT ............................................................ 36 4.3.2 TEST INSTRUMENTS ............................................................................................... 36 4.3.3 TEST PROCEDURE .................................................................................................. 36 4.3.4 DEVIATION FROM TEST STANDARD ...................................................................... 36 4.3.5 EUT OPERATING CONDITION ................................................................................. 36 4.3.6 TEST RESULTS ......................................................................................................... 37 5. PHOTOGRAPHS OF THE TEST CONFIGURATION................................................. 39 6. INFORMATION ON THE TESTING LABORATORIES ............................................... 40 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB........................................................................................ 41 Report No.: RF981109L10 3 Report Format Version 3.0.0 1. CERTIFICATION PRODUCT: Wireless Transceiver MODEL NO.: 1446 BRAND: Microsoft APPLICANT: Microsoft Corporation TESTED: Nov. 09 ~ Nov. 30, 2009 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: 1446) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Dec. 14, 2009 Andrea Hsia / Sp…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4