C3K1537Wireless Controller

Quick Setup Guide Guia de Confi guração Rápida Guide de confi guration rapide Guía de confi guración rápida X189183301QSG.indd 16/12/13 5:32 PM 12 3 X189183301QSG.indd 26/12/13 5:32 PM 4 X189183301QSG.indd 36/12/13 5:32 PM X18-91833-01 EN For full instructions and support, visit xbox.com/xboxone/gettingstarted PT Para obter instruções completas e suporte, visite xbox.com/xboxone/gettingstarted FR Pour obtenir les instructions complètes et de l’assistance, visitez le site xbox.com/xboxone/gettingstarted ES Para obtener las instrucciones completas y soporte, visita xbox.com/xboxone/gettingstarted © 2013 Microsoft X189183301QSG.indd 46/12/13 5:32 PM

XBOX ONE ACCESSORY IMPORTANT INFORMATION This symbol identifies safety and health messages in this product guide and other product manuals. Read this guide for important safety and health information for the product that you have purchased. WARNING: Failure to properly set up, use, and care for this product can increase the risk of serious injury, death, property damage, or damage to the product or related accessories. Read this guide and keep all printed guides for future reference. For replacement guides, go to xbox.com/durango/useinstructions. WARNING: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock, fire or other hazard, or damage to your Xbox One accessory. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty and render the Xbox One accessory ineligible for authorized repair. Modifying your accessory can result in a permanent ban from Xbox Live. USING YOUR ACCESSORY Make Sure Children Play Safely Make sure children using any Xbox One accessory together with the Xbox One console play safely and within their limits, and make sure that they understand proper use of the system. Refer to the Xbox One console guide for more information. WARNING: Choking hazard This device may contain small parts that may be a choking hazard to children under 3. Keep small parts away from children. CAUTION: Cables Arrange any cables and cords so that people and pets are unlikely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. CAUTION: Hearing Safety Extended exposure to high sound volumes when using a headset may result in temporary or permanent hearing loss. To reduce the risk of hearing loss, set the volume loud enough to hear clearly in quiet surroundings, and no louder.  Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing.  Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise-canceling headphones can reduce outside noise so that you don’t have to turn up the volume.  If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise canceling headphones, you should be able to hear nearby people speak. Minimize your time listening to loud sound The more time that you spend exposed to high sound volumes, the more likely you are to damage your hearing. The louder the sound, the less time that is required to damage hearing.  Minimize your time listening to loud sound. At maximum volume, listening to music on the device with headphones can permanently damage your hearing in 15 minutes.  Even lower volumes can damage hearing if you are exposed to it for many hours.  All of the sound that you are exposed to during a day adds up. If you are exposed to other loud sound, it takes less time listening at high volumes to cause hearing damage.  To safely use the device without a time limit, keep the volume low enough that you can carry on a conversation with people nearby. ELECTRICAL SAFETY WARNING: As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock, fire, or damage to Xbox One accessories and console.  Use only an approved charging cable.  Do not allow a wireless device or charging cable to become wet.  Unplug the charging cable during lightning storms or when unused for long periods.  To prevent damage, avoid sitting or stepping on a wireless device, its cable, or the cable plug or connector. Go to xbox.com/durango/electricalsafety for more information. BATTERY POWERED DEVICES WARNING: Battery Safety The following precautions apply to all products that use disposable or rechargeable batteries including lithium polymer. Improper battery use may result in series injury, death, property damage, or damage to the product or related accessories as a result of battery fluid leakage, fire, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury:  Keep batteries out of reach of children.  Remove the batteries if they are worn out or before storing your device for an extended period. Always remove old, weak, or worn- out batteries immediately and recycle or dispose of them in accordance with local and national disposal regulations.  If a battery leaks, remove all batteries by reversing the installation steps provided for this product, being careful to keep the leaked fluid from touching your skin or clothes. If fluid from the battery contacts skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a dry cloth, or follow the battery manufacturer’s recommendations for cleanup.  Do not open, puncture, mutilate, heat, apply direct heat to, or dispose of batteries in fire.  Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries).  Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.  Do not carry or place batteries together with necklaces, hairpins or other metal objects.  Do not leave a battery-powered device in direct sunlight for an extended period, such as on the dash of car during the summer.  Do not immerse batteries in water or allow them to become wet.  Do not connect batteries directly to wall outlets or car cigarette-lighter sockets.  Do not attempt to connect to the battery…

Text truncated - open the document above for the full version.

CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. May 28, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: C3K1537 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specifications Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until November 21, 2013: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Pam Galvan Compliance Engineer Microsoft Corporation CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer.

CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. Date: May 28, 2013 UL LLC Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL LLC, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL LLC on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Pam Galvan Compliance Engineer Microsoft Corporation REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

PROPOSED FCC/IC ID LABEL AND LOCATION Bottom of EUT FCC /IC Label Location MICROSOFT CORPORATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: C3K1537 IC: 3048A-1537 Model: 1537

FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 102 ISSUE 3 RF EXPOSURE REPORT FOR WIRELESS CONTROLLER MODEL NUMBER: 1537 FCC ID: C3K1537 IC: 3048A-1537 REPORT NUMBER: 13U14963A ISSUE DATE: 2013-07-18 Prepared for MICROSOFT 1 MICROSOFT WAY REDMOND WA, 98052, USA Prepared by UL LLC 1285 WALT WHITMAN RD. MELVILLE, NY 11747, U.S.A. TEL: (631) 271-6200 FAX: (877) 854-3577 REPORT NO: 13U14963A DATE: 2013-07-18 FCC ID: C3K1537 IC: 3048A-1537 Page 2 of 10 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. Revision History Rev. Issue Date Revisions Revised By -- 6/11/13 Initial Issue M. Antola A 7/18/13 Removed statement from report that EUT is suitable for both Mobile & Portable applications. M. Antola REPORT NO: 13U14963A DATE: 2013-07-18 FCC ID: C3K1537 IC: 3048A-1537 Page 3 of 10 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS ................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION ...................................................................................... 9 6. RF EXPOSURE RESULTS ................................................................................................10 REPORT NO: 13U14963A DATE: 2013-07-18 FCC ID: C3K1537 IC: 3048A-1537 Page 4 of 10 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: MICROSOFT 1 MICROSOFT WAY REDMOND, WA, 98052, USA EUT DESCRIPTION: WIRELESS CONTROLLER MODEL: 1537 SERIAL NUMBER: NON-SERIALIZED PRODUCTION UNITS DATE TESTED: 2013-04-08 to 2013-05-09 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 3 Pass UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL LLC based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL CCS By: Calculated By: Bob DeLisi Mike Antola WiSE Principal Engineer WiSE Project Lead UL UL REPORT NO: 13U14963A DATE: 2013-07-18 FCC ID: C3K1537 IC: 3048A-1537 Page 5 of 10 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL LLC Document “13U14963 – FCC IC DTS WLAN Report – Model 1537” for operation in the 2.4 GHz and 5 GHz DTS bands. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 1285 Walt Whitman Rd. Melville, NY 11747, USA. UL Melville is accredited by NVLAP, Laboratory Code 100255-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/1002550.htm. REPORT NO: 13U14963A DATE: 2013-07-18 FCC ID: C3K1537 IC: 3048A-1537 Page 6 of 10 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. REPORT NO: 13U149…

Text truncated - open the document above for the full version.

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR WIRELESS CONTROLLER MODEL NUMBER: 1537 FCC ID: C3K1537 IC: 3048A-1537 REPORT NUMBER: 13U14963 ISSUE DATE: 2013-05-21 Prepared for MICROSOFT 1 MICROSOFT WAY REDMOND WA, 98052, USA Prepared by UL LLC 1285 WALT WHITMAN RD. MELVILLE, NY 11747, U.S.A. TEL: (631) 271-6200 FAX: (877) 854-3577 REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 2 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. Revision History Rev. Issue Date Revisions Revised By -- 5/21/13 Initial Issue M. Antola REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 3 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT .............................................................................................. 7 5.2. MAXIMUM OUTPUT POWER...................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 7 5.4. SOFTWARE AND FIRMWARE .................................................................................... 7 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 8 5.6. DESCRIPTION OF TEST SETUP ................................................................................ 9 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................11 7. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ...........................................13 7.1.1. ON TIME AND DUTY CYCLE RESULTS .............................................................13 7.1.2. MEASUREMENT METHOD .................................................................................13 7.1.3. DUTY CYCLE PLOTS .........................................................................................14 8. ANTENNA PORT TEST RESULTS ...................................................................................16 8.1. 802.11g MODE IN THE 2.4 GHz BAND ......................................................................16 8.1.1. 6 dB BANDWIDTH ...............................................................................................16 8.1.2. 99% BANDWIDTH ...............................................................................................19 8.1.3. AVERAGE POWER .............................................................................................22 8.1.4. OUTPUT POWER ...............................................................................................23 8.1.5. PSD .....................................................................................................................27 8.1.6. OUT-OF-BAND EMISSIONS ...............................................................................30 8.2. 802.11n HT20 MODE IN THE 2.4 GHz BAND ............................................................35 8.2.1. 6 dB BANDWIDTH ...............................................................................................35 8.2.2. 99% BANDWIDTH ...............................................................................................38 8.2.3. AVERAGE POWER .............................................................................................41 8.2.4. OUTPUT POWER ...............................................................................................42 8.2.5. PSD .....................................................................................................................46 8.2.6. OUT-OF-BAND EMISSIONS ...............................................................................49 8.3. 802.11a MODE IN THE 5.8 GHz BAND ......................................................................54 8.3.1. 6 dB BANDWIDTH ...............................................................................................54 REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 4 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. 8.3.2. 99% BANDWIDTH ...............................................................................................57 8.3.3. AVERAGE POWER .............................................................................................60 8.3.4. OUTPUT POWER ...............................................................................................61 8.3.5. PSD ...........................................................................................................…

Text truncated - open the document above for the full version.

REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 112 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. 11. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 113 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO Below 1GHz Above 1GHz REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 114 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. RADIATED BACK PHOTO Below 1GHz Above 1GHz REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 115 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS PHOTO REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 116 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. Y-AXIS PHOTO REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 117 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. Z-AXIS PHOTO REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 118 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO REPORT NO: 13U14963 DATE: 2013-05-21 FCC ID: C3K1537 IC: 3048A-1537 Page 119 of 119 UL LLC FORM NO: CCSUP4701D 1285 WALT WHITMAN RD, MELVILLE, NY 11747, USA TEL: (631) 271-6200 FAX: (877) 854-3577 This report shall not be reproduced except in full, without the written approval of Underwriters Laboratories Inc. END OF REPORT LINE CONDUCTED BACK PHOTO