C3K1563Camera

MSR Cam This symbol identifies safety and health messages in this Device Guide WARNING: Read Safety & Health Info Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft ® device that you have purchased. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. WARNING: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or battery. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. CAUTION: Cable and cord safety Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. To avoid damaging the USB cable:  Protect the cable from being walked on.  Protect cable from being pinched or sharply bent, particularly where they connect to the devices.  Do not jerk, knot, sharply bend, or otherwise abuse the cable.  Do not expose the cable to sources of heat.  Keep children and pets away from the cable. Do not allow them to bite or chew on them.  When disconnecting the cable, pull on the plug—do not pull on the cord.  If a cable becomes damaged in any way, stop using it immediately.  Unplug your device during lightning storms or when unused for long periods of time. WARNING: Battery Safety This device contains a built-in battery, improper use of which may result in explosion.  Do not heat, open, puncture, mutilate, or dispose of the product in fire.  Do not leave the device in direct sunlight for an extended period of time, which could cause melting or battery damage.  Do not leave this product in a vehicle, particularly on a car dash on a hot day.  Do not strike, throw, step on, or subject the product to severe physical shock. Do not wear the device while the battery is charging. The battery in this device is not user replaceable and should only be replaced by Microsoft or a Microsoft Authorized Service Provider. WARNING: Use Near Water This device is not waterproof. To reduce the risk of fire or shock do not expose it to excessive rain or moisture. Do not attempt to charge this device in rain or excessive moisture conditions. Do not attempt to dry device with a hair dryer or a microwave oven. WARNING: Lanyard Avoid possible injury by entanglement, entrapment, or strangulation. This device and lanyard are not toys. Do not allow small children to play with or wear the lanyard. Take great care if using the device with the lanyard near equipment, machinery, or environments where the lanyard could become entangled or entrapped. WARNING: Environmental Conditions In order to reduce the risk of fire or explosion, use of batteries and storage conditions for batteries should not exceed their temperature ratings as shown in the Regulatory Information section of this document. WARNING: Airbag Avoidance For vehicles equipped with airbags, do not place the device or other objects on or near the airbags. If an airbag deploys, objects placed on or near the airbag could cause serious personal injury or even death. WARNING: Choking Hazard This device may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children. WARNING: Follow Instructions to Avoid Interference Problems Turn off your mobile device in any location where posted notices instruct you to do so. In an aircraft, turn off your device whenever instructed to do so by airline staff, or prior to packing a wireless device in luggage. Please consult airline staff about using it in flight. WARNING: Potentially Explosive Atmospheres Areas with potentially explosive atmospheres are often, but not always, posted and can include fueling areas, such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain dust, or metal powders. When you are in such an area, turn off your mobile device, and do not remove or install battery chargers, AC adapters, or any other accessory. In such areas, sparks can occur and cause an explosion or fire. WARNING: Personal Medical Devices Radio-frequency emissions from electronic equipment can negatively affect the operation of other electronic equipment, causing them to malfunction. Although the device is designed, tested, and manufactured to comply with regulations governing radio frequency emission in countries such as the United States, Canada, the European Union, and Japan, the wireless transmitters and electrical circuits in the device may cause interference in other electronic equipment. Therefore, please take the following precautions: Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm (6 inches) be maintained between a wireless device and a pacemaker to avoid potential interference with the pacemaker. Persons with pacemakers:  Should always keep the device more than 15 cm (6 inches) from the pacemaker when the wireless device is turned on.  Should not carry in the breast pocket.  If you have any reason to suspect that interference is taking place, turn the device off immediately. Other Medical Devices If you use any other personal medical device, consult the medical device manufacturer or your physician to determine if it is appropriate for you to use other electronic devices near your medical device. CAUTION: Heat Related Concerns The device may become warm during normal use. The device complies with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC …

Text truncated - open the document above for the full version.

Declaration for no non-US channel operation June 12, 2014 We, Microsoft Corporation declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: C3K1563 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! -----------------------------------

Date: May 2, 2014 FCC ID: C3K1563 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ------------------------------------------------------

Date: May 2, 2014 FCC ID: C3K1563 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------- Anindita Mitra Compliance Engineer MICROSOFT CORPORATION Tel: 425-882-8080

Power of Attorney Date: May 2, 2014 Subject: AUTHORIZATION LETTER FOR TCB for FCC ID: C3K1563 To whom it may concern: We, the undersigned, Microsoft Corporation., hereby authorize Bureau Veritas Consumer Products Services(H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval of the FCC ID listed above and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------ Anindita Mitra Compliance Engineer MICROSOFT CORPORATION Tel: 425-882-8080

Page 1 CONSTRUCTION PHOTOS OF EUT

Label Content

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 21 Report No. : SA130914D08 Issued Date : Nov. 21, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130914D08 Applicant : MICROSOFT CORPORATION Address : ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A. Product : Camera FCC ID : C3K1563 Brand : Microsoft Model No. : 1563 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r01 KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 Sample Received Date : Sep. 14, 2013 Date of Testing : Nov. 01, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 21 Report No. : SA130914D08 Issued Date : Nov. 21, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure ................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 14 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods ................................................…

Text truncated - open the document above for the full version.

Report No.: RF130914D08-1 1 of 58 Report Format Version 5.1.0 FCC TEST REPORT (BLUETOOTH EDR) REPORT NO.: RF130914D08-1 MODEL NO.: 1563 FCC ID: C3K1563 RECEIVED: Sep. 14, 2013 TESTED: Oct. 9 ~ 18, 2013 ISSUED: Oct. 21, 2013 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130914D08-1 2 of 58 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD ............................................................................................ 4 1. CERTIFICATION ......................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .............................................................................. 6 3. GENERAL INFORMATION ......................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 7 3.2 DESCRIPTION OF TEST MODES.............................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 12 4. TEST TYPES AND RESULTS ................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 13 4.1.2 TEST INSTRUMENTS .............................................................................................. 14 4.1.3 TEST PROCEDURES............................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ..................................................................... 15 4.1.5 TEST SETUP ............................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 16 4.1.7 TEST RESULTS ....................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 29 4.2.2 TEST INSTRUMENTS .............................................................................................. 29 4.2.3 TEST PROCEDURES............................................................................................... 30 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................... 30 4.2.5 TEST SETUP ............................................................................................................ 31 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 31 4.2.7 TEST RESULTS ....................................................................................................... 32 4.3 NUMBER OF HOPPING FREQUENCY USED ......................................................... 34 4.3.1 LIMIT OF HOPPING FREQUENCY USED ............................................................... 34 4.3.2 TEST SETUP ............................................................................................................ 34 4.3.3 TEST INSTRUMENTS .............................................................................................. 34 4.3.4 TEST PROCEDURES............................................................................................... 34 4.3.5 DEVIATION FROM TEST STANDARD ..................................................................... 34 4.3.6 TEST RESULTS ....................................................................................................... 34 4.4 DWELL TIME ON EACH CHANNEL ......................................................................... 36 4.4.1 LIMIT OF DW…

Text truncated - open the document above for the full version.

Report No.: RF130914D08 1 of 88 Report Format Version 5.2.0 FCC TEST REPORT (WLAN) REPORT NO.: RF130914D08 MODEL NO.: 1563 FCC ID: C3K1563 RECEIVED: Sep. 14, 2013 TESTED: Oct. 9 ~ 18, 2013 ISSUED: Oct. 21, 2013 APPLICANT: MICROSOFT CORPORATION ADDRESS: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130914D08 2 of 88 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................ 4 1. CERTIFICATION ............................................................................................. 5 2. SUMMARY OF TEST RESULTS ..................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................. 6 3. GENERAL INFORMATION ............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 7 3.2 DESCRIPTION OF TEST MODES .................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................. 9 3.3 DUTY CYCLE OF TEST SIGNAL.................................................................. 12 3.4 DESCRIPTION OF SUPPORT UNITS .......................................................... 13 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 13 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 14 4. TEST TYPES AND RESULTS ....................................................................... 15 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................ 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ..... 15 4.1.2 TEST INSTRUMENTS .................................................................................. 16 4.1.3 TEST PROCEDURES ................................................................................... 17 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 17 4.1.5 TEST SETUP ................................................................................................ 18 4.1.6 EUT OPERATING CONDITIONS .................................................................. 18 4.1.7 TEST RESULTS ............................................................................................ 19 4.2 CONDUCTED EMISSION MEASUREMENT ................................................ 49 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................. 49 4.2.2 TEST INSTRUMENTS .................................................................................. 49 4.2.3 TEST PROCEDURES ................................................................................... 50 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 50 4.2.5 TEST SETUP ................................................................................................ 50 4.2.6 EUT OPERATING CONDITIONS .................................................................. 50 4.2.7 TEST RESULTS ............................................................................................ 51 4.3 6DB BANDWIDTH MEASUREMENT ............................................................ 53 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ......................................... 53 4.3.2 TEST SETUP ................................................................................................ 53 4.3.3 TEST INSTRUMENTS .................................................................................. 53 4.3.4 TEST PROCEDURE ..................................................................................... 53 4.3.5 DEVIATION FROM TEST STANDARD ......................................................... 53 4.3.6 EUT OPERATING CONDITIONS .................................................................. 53 4.3.7 TEST RESULTS ............................................................................................ 54 Report No.: RF130914D08 3 of 88 Report Format Version 5.2.0 4.4 CONDUCTED OUTPUT POWER ................................................................. 60 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .................. 60 4.4.2 TEST SETUP ................................................................................................ 60 4.4.3 T…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130914D08 Revision : R01 <Photographs of EUT> FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA130914D08 Revision : R01 <Photographs of SAR Setup> Front Face of EUT with 0 cm Gap Rear Face of EUT with 0 cm Gap Left Side of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Top Side of EUT with 0 cm Gap Bottom Side of EUT with 0 cm Gap

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST